Chairship system and decision making by consensus in international agreements : the case of ASEAN

How are different positions reconciled under decision making by consensus in international agreements? This article aims to answer this question. Consensus rule provides each participant a veto, which risks resulting in non-agreement. Taking ASEAN as a case study of international organizations that have adopted consensus rule as the main decision-making procedure, this article presents the chairship system as an analytical scheme to examine how different positions are or are not reconciled under consensus rule. The system is based on conventional knowledge regarding the chair in international conference, which can be defined as an institution where the role of the chair is taken by one member state in an international organization and plays a role in agenda-setting. The agenda-setting power given to the chair varies across organizations. This article assumes that the chair in ASEAN is given a relatively strong agenda-setting power to enable the chair to reach agreements and bias such agreements in its own favor.

Determination of Dipyrone in pharmaceutical preparations based on the chemiluminescent reaction of the quinolinic hydrazide-H2O2-vanadium (IV) system and flow injection analysis

A rapid, economic and sensitive chemiluminescent method involving flow-injection analysis was developed for the determination of dipyrone in pharmaceutical preparations. The method is based on the chemiluminescent reaction between quinolinic hydrazide and hydrogen peroxide in a strongly alkaline medium, in which vanadium(IV) acts as a catalyst. Principal chemical and physical variables involved in the flow-injection system were optimized using a modified simplex method. The variations in the quantum yield observed when dipyrone was present in the reaction medium were used to determine the concentration of this compound. The proposed method requires no preconcentration steps and reliably quantifies dipyrone over the linear range 1–50 µg/mL. In addition, a sample throughput of 85 samples/h is possible. Copyright © 2011 John Wiley & Sons, Ltd.

Optimizing rabbit production under heat stress: cage density and cage size during fattening, and breeding system and water quality on rabbit does

The aim of this work was to evaluate different management strategies to optimize rabbit production under chronic heat stress. To achieve it, three trials were conducted. In the first trial, to find the optimal cage density in tropical very dry forest condition, were measured growth performance, mortality rate, injured animals and carcass performance over an initial population of 300 cross-breed rabbits of New Zealand, California, Butterfly, Dutch and Satin, weaned at 30 days (535 ± 8 g, standard error). Treatments evaluated were: 6, 12, 18 and 24 rabbits/m2 (3, 6, 9 and 12 rabbits/cage, respectively, each cage of 0.5 m2). The maximal temperature-humidity index indicated a severe heat stress from weaning to 2.2 kg body weight (experimental time). At the end of experimental period 10, 20, 30 and 30 rabbits from the treatments of 6, 12, 18 and 24 rabbits/m2, respectively, were slaughtered and carcass performance recorded. Average daily gain and feed intake decreased by 0.31 ± 0.070 and 1.20 ± 0.25 g, respectively, per each unit that the density increased at the beginning of the experiment (P = 0.001). It increased the length of the fattening period by 0.91 ± 0.16 d (P = 0.001) per each unit of increment of density. However, rabbit production (kg/m2) increased linear and quadratically with the density (P < 0.008). Animals housed at the highest density compared to the lower one tended to show a higher incidence of ringworm (68.9 vs 39.4%; P = 0.075), injured animals (16.8 vs 3.03%; P = 0.12) and mortality (20.5 vs 9.63%; P = 0.043). The proportion of scapular fat (P = 0.042) increased linearly with increasing levels of density. Increasing density reduced linearly dorsal length (P = 0.001), and reduced linear and quadratically drip loss percentage (P = 0.097 and 0.018, respectively). In the second trial, 46 nulliparous rabbit does (23 clipped and 23 unclipped) with a BW of 3.67 ± 0.05 kg (s.e.) were used to evaluate heat stress and circadian rhythms comparing unclipped and clipped rabbit does, and to study if a more extensive breeding system increase litters performance at weaning without impairing rabbit doe performance,. Rectal temperature, feed and water 4 intake were recorded for 24 h. Rabbit does were mated 7 d after circadian measurements, and randomly assigned to two breeding systems. Control (C): mated at 14 d after parturition + litter weaned at 35 d of age. Extensive (E): mate at 21 after parturition + litter weaned at 42 d of age. The first three cycles were evaluated concerning to rabbit doe and litter performance. Two hundred twenty eight weaned rabbits, were divided into two cage sizes: 0.5 and 0.25 m2 with same density (16 rabbit/m2) and growing performance was recorded. Farm and rectal temperatures were minimal and feed and water intake maximal during the night (P < 0.001). Unclipped rabbit does showed higher rectal temperature (P = 0.045) and lower feed intake respect to clipped does (P = 0.019) which suggest a lower heat stress in the latter. Kits weaned per litter was reduced by 33% (P=0.038) in C group. This reduction was more important in the 2nd and 3rd cycles compared to the first (P ≤ 0.054). Rabbit doe feed efficiency tended to decrease in E respect C group (P = 0.093), whereas it was impaired from the first to the third cycle by 48% (P = 0.014). Growing rabbits from the E group were heavier at weaning (by 38%. P < 0.001), showed a higher feed intake (+7.4%) and lower feed efficiency (-8.4%) throughout the fattening period (P ≤ 0.056) respect to C group. Cage size had minor influence in growing performance. In the third trial, forty five non pregnant and non lactating rabbit does (21 nulliparous and 24 multiparous) were assigned randomly to farm water and to potable water to study if a water quality improvement can affect positively rabbit doe response to heat stress during pregnancy and lactation. A transponder was implanted in each animal to record subcutaneous temperature at 07:30 and 14:30 h. Experimental period extended from pregnancy (with no lactation) to the next lactation (until day 28). Body temperature and milk production were recorded daily, and body condition, feed and water intake weekly. Water quality did not affect any trait (P ≥ 0.15). Pregnant rabbit does were classified as does that weaned (W: 47%), not weaned (NW: 44%) or those pregnant that did not deliver (NB: 9%). Body temperature and feed intake decreased during pregnancy (P ≤ 0.031), but water intake remained constant. In this period body temperature decreased with metabolic weight (P ≤ 0.009). In W and NW does, 5 from mating to birth energy and protein balance impaired (P≤0.011). Body temperature of W does tended to be the lowest (P ≤ 0.090). Pregnancy length and total number of kits born tended to be longer and higher in NW than in W does (P = 0.10 and 0.053, respectively). Kit mortality at birth and from birth to 14 d of lactation was high, being worse for NW than for W does (97 vs. 40%; P<0.001). Body temperature during lactation was maximal at day 12, and milk production increased it (P ≤ 0.025). . In conclusion, in our heat stress conditions densities higher than 18 rabbits/m2 (34 kg/m2) at the end of fattening, are not recommended despite cage size, gestation and lactation productivity impaired not only when lactation is extended and along successive reproductive cycles but also due to a reduced embryo/kit survival and finally water quality improvement did not attenuate negative effect of heat stress. RESUMEN El propósito de éste trabajo fue evaluar diferentes estrategias de manejo para optimizar la producción de conejos bajo estrés térmico. Para lo cual se desarrollaron tres experimentos. En el primer experimento, para encontrar el número óptimo de gazapos por m2 de jaula durante el cebo en condiciones de bosque muy seco tropical, se estudiaron los rendimientos durante el cebo, mortalidad, animales lesionados y rendimiento de la canal sobre una población inicial de 300 conejos mestizos de Nueva Zelanda, California, Mariposa, Holandés y Satin, destetados a los 30 días de edad (535 ± 8g, error estándar). Los tratamientos evaluados fueron: 6, 12, 18 y 24 conejos/m2 (3, 6, 9 y 12 conejos/jaula, respectivamente, en jaulas de 0.5 m2). Durante el período experimental (destete a 2.2 kg de peso vivo), se observaron valores de THI correspondientes con un estrés térmico severo (THI max. De 31 a 35). Al final del período experimental, 10, 20, 30, y 30 conejos de los tratamientos con densidades de 6, 12, 18 y 24 conejos/m2, respectivamente, fueron sacrificados y su canal fue valorada. El promedio de la ganancia diaria y el consumo de alimento disminuyeron en 0.31 ± 0.070 y 1.20 ± 0.25 g, respectivamente, por cada unidad de incremento en la densidad al inicio del experimento (P=0.001). Esto alargó el período de engorde en 0.91 ± 0.16 d (P=0.001) por cada unidad de incremento de la densidad. Sin embargo, la producción de conejos (kg/m2) aumentó lineal y cuadráticamente con la densidad (P<0.008). Los animales alojados en las mayores densidades en comparación con el resto tendieron a mostrar una mayore incidencia de tiña (68.9 vs 39.4%; P=0.075), de cantidad de animales heridos (16.8 vs 3.03%; P=0.12), así como de mortalidad (20.5 vs 9.63%; P=0.043). El aumento en la densidad aumentó linealmente la proporción de grasa escapular (P=0.042) y redujo linealmente la longitud dorsal (P=0.001), y lineal y cuadráticamente el porcentaje de pérdida por goteo (P=0.018). En el segundo experimento, 46 conejas nulliparas (23 rasuradas y 23 no rasuradas) con un peso vivo de 3.67 ± 0.05 kg (e.e.) fueron usadas para evaluar el estrés 8 térmico y los ritmos circadianos comparando conejas rasuradas o no, y estudiar si un sistema de crianza más extensivo mejora el desempeño de la camada al destete sin perjudicar la productividad de la coneja. Durante 24 h se midió la temperatura rectal, consumo de alimento y de agua. Las conejas fueron montadas 7 días después, y distribuidas en dos sistemas de crianza. El control (C): monta a 14 días posparto y destete a 35 d de edad. El extensivo (E): monta a 21 días posparto y destete a 42 d de edad. Se controló la productividad de la coneja y la camada durante los tres primeros ciclos. Doscientos veintiocho gazapos fueron distribuidos en dos tamaños de jaulas (0.5 y 0.25 m2) con la misma densidad (16 conejos/m2) y se controlaron sus rendimientos productivos. Durante la noche se observaron los valores mínimos para la temperatura ambiental y rectal, y los máximos para consumo de alimento y agua (P< 0.001). Las conejas no rasuradas mostraron mayor temperatura rectal (P=0.045) y menores valores de consumo de alimento con respecto a las conejas rasuradas (P=0.019), lo que sugiere un menor estrés térmico en las últimas. El número de gazapos destetados por camada se redujo en 33% (P=0.038) en el grupo C. Este comportamiento se acentuó en el 2do y 3er ciclo en comparación con el primero (P≤0.054). La eficiencia alimenticia de las conejas tendió a disminuir en el grupo E con respecto al grupo C (P=0.093), dicha tendencia se acentúa del primer al tercer ciclo en un 48% (P=0.014). Los gazapos en fase de crecimiento provenientes del grupo E fueron más pesados al momento del destete (en 38% P<0.001), mostrando un mayor consumo de alimento (+7.4%) y menor eficiencia alimenticia (-8.4%) a lo largo del engorde (P≤0.056) con respecto al grupo C. El tamaño de la jaula tuvo una mínima influencia en el comportamiento durante el crecimiento de éstos gazapos. En el tercer experimento, cuarenta y cinco conejas no gestantes ni lactantes (21 nulíparas y 24 multíparas) se les asignó al azar agua dos tipos de agua: común de la granja y agua potable, con el fin de estudiar si una mejora en la calidad del agua puede afectar positivamente la respuesta de la coneja al estrés térmico durante la gestación y la lactancia. Se les implantó un transponder para registrar la temperatura subcutánea a las 7:30 y a las 14:30 h. El período experimental se extendió desde la gestación (sin 9 lactancia) hasta la lactanción consecutiva (hasta los 28 días). La temperatura corporal y la producción de leche se controlaron diariamente, y la condición corporal, consumo de agua y alimento, semanalmente. La calidad del agua no afectó a ninguna variable (P≥0.15). Las conejas preñadas fueron clasificadas como conejas que destetaron (W: 47%), que no destetaron (NW:44%) o aquellas que no parieron (NB: 9%). La temperatura corporal y consumo de alimento disminuyeron durante la gestación (P≤0.031), mientras que el consumo de agua se mantuvo constante. La temperatura corporal descendió con el peso metabólico durante la gestación (P≤0.009). El balance de energía y proteína disminuyó desde la monta al parto para las conejas W y NW (P≤0.011). Durante la gestación la temperatura corporal tendió a ser menor en las conejas W (P≤0.090). La longitud de la gestación y el número total de gazapos nacidos tendieron a ser mayores en conejas NW que en conejas W (P=0.10 y 0.053, respectivamente). La mortalidad de los gazapos al parto y del parto a los 14 días de lactancia fue alta, siendo peor para las conejas NW que para las W (97 vs 40%; P<0.001). Durante la lactancia la temperatura corporal alcanzó su valor máximo para el día 12, y la producción de leche indujo un incremento en la misma (P≤0.025). En conclusión, en nuestras condiciones de estrés térmico y sin importar el tamaño de la jaula, no se recomiendan densidades mayores a 18 conejos/m2 (34 kg/m2) al final del engorde. La productividad de la gestación y la lactancia disminuyen cuando la lactancia es mayor y se suceden varios ciclos reproductivos seguidos. Esto se debe al efecto negativo del estrés térmico sobre la vitalidad y supervivencia del embrión/gazapo. La mejora de la calidad del agua atenuó el efecto negativo del estrés térmico. Las conejas más productoras parece que son aquéllas que consiguen manejar mejor el estrés térmico.

A hardware in the loop design methodology for FPGA system and its application to complex functions

In this work, a unified algorithm-architecture-circuit co-design environment for complex FPGA system development is presented. The main objective is to find an efficient methodology for designing a configurable optimized FPGA system by using as few efforts as possible in verification stage, so as to speed up the development period. A proposed high performance FFT/iFFT processor for Multiband Orthogonal Frequency Division Multiplexing Ultra Wideband (MB-OFDM UWB) system design process is given as an example to demonstrate the proposed methodology. This efficient design methodology is tested and considered to be suitable for almost all types of complex FPGA system designs and verifications.

Finite element code-based modeling of a multi-feature isolation system and passive alleviation of possible inner pounding

The existing seismic isolation systems are based on well-known and accepted physical principles, but they are still having some functional drawbacks. As an attempt of improvement, the Roll-N-Cage (RNC) isolator has been recently proposed. It is designed to achieve a balance in controlling isolator displacement demands and structural accelerations. It provides in a single unit all the necessary functions of vertical rigid support, horizontal flexibility with enhanced stability, resistance to low service loads and minor vibration, and hysteretic energy dissipation characteristics. It is characterized by two unique features that are a self-braking (buffer) and a self-recentering mechanism. This paper presents an advanced representation of the main and unique features of the RNC isolator using an available finite element code called SAP2000. The validity of the obtained SAP2000 model is then checked using experimental, numerical and analytical results. Then, the paper investigates the merits and demerits of activating the built-in buffer mechanism on both structural pounding mitigation and isolation efficiency. The paper addresses the problem of passive alleviation of possible inner pounding within the RNC isolator, which may arise due to the activation of its self-braking mechanism under sever excitations such as near-fault earthquakes. The results show that the obtained finite element code-based model can closely match and accurately predict the overall behavior of the RNC isolator with effectively small errors. Moreover, the inherent buffer mechanism of the RNC isolator could mitigate or even eliminate direct structure-tostructure pounding under severe excitation considering limited septation gaps between adjacent structures. In addition, the increase of inherent hysteretic damping of the RNC isolator can efficiently limit its peak displacement together with the severity of the possibly developed inner pounding and, therefore, alleviate or even eliminate the possibly arising negative effects of the buffer mechanism on the overall RNC-isolated structural responses.

Influence of the main cereal and feed form of the rearing phase diets on performance, digestive tract, and body traits of brown-egg laying pullets from hatch to 17 weeks of age

We hypothesize that pullets could respond similarly, independent of feed form, to the feeding of diets based on corn or wheat supplemented with adequate NSP enzymes. Also, pullets would quickly adapt their gastrointestinal tract and modify productive performance accordingly, when switched from crumbles to mash feeds. The aim of this research was to evaluate the effects of feeding crumbles for different periods of time, followed by feeding mash to 17 wk of age, on performance, gastrointestinal tract development, and body measurements of brown-egg laying pullets fed diets based on corn or wheat.

The Yeast GRD20 Gene Is Required for Protein Sorting in the trans-Golgi Network/Endosomal System and for Polarization of the Actin Cytoskeleton

The proper localization of resident membrane proteins to the trans-Golgi network (TGN) involves mechanisms for both TGN retention and retrieval from post-TGN compartments. In this study we report identification of a new gene, GRD20, involved in protein sorting in the TGN/endosomal system of Saccharomyces cerevisiae. A strain carrying a transposon insertion allele of GRD20 exhibited rapid vacuolar degradation of the resident TGN endoprotease Kex2p and aberrantly secreted ∼50% of the soluble vacuolar hydrolase carboxypeptidase Y. The Kex2p mislocalization and carboxypeptidase Y missorting phenotypes were exhibited rapidly after loss of Grd20p function in grd20 temperature-sensitive mutant strains, indicating that Grd20p plays a direct role in these processes. Surprisingly, little if any vacuolar degradation was observed for the TGN membrane proteins A-ALP and Vps10p, underscoring a difference in trafficking patterns for these proteins compared with that of Kex2p. A grd20 null mutant strain exhibited extremely slow growth and a defect in polarization of the actin cytoskeleton, and these two phenotypes were invariably linked in a collection of randomly mutagenized grd20 alleles. GRD20 encodes a hydrophilic protein that partially associates with the TGN. The discovery of GRD20 suggests a link between the cytoskeleton and function of the yeast TGN.

Pseudomonas syringae Hrp type III secretion system and effector proteins

Pseudomonas syringae is a member of an important group of Gram-negative bacterial pathogens of plants and animals that depend on a type III secretion system to inject virulence effector proteins into host cells. In P. syringae, hrp/hrc genes encode the Hrp (type III secretion) system, and avirulence (avr) and Hrp-dependent outer protein (hop) genes encode effector proteins. The hrp/hrc genes of P. syringae pv syringae 61, P. syringae pv syringae B728a, and P. syringae pv tomato DC3000 are flanked by an exchangeable effector locus and a conserved effector locus in a tripartite mosaic Hrp pathogenicity island (Pai) that is linked to a tRNALeu gene found also in Pseudomonas aeruginosa but without linkage to Hrp system genes. Cosmid pHIR11 carries a portion of the strain 61 Hrp pathogenicity island that is sufficient to direct Escherichia coli and Pseudomonas fluorescens to inject HopPsyA into tobacco cells, thereby eliciting a hypersensitive response normally triggered only by plant pathogens. Large deletions in strain DC3000 revealed that the conserved effector locus is essential for pathogenicity but the exchangeable effector locus has only a minor role in growth in tomato. P. syringae secretes HopPsyA and AvrPto in culture in a Hrp-dependent manner at pH and temperature conditions associated with pathogenesis. AvrPto is also secreted by Yersinia enterocolitica. The secretion of AvrPto depends on the first 15 codons, which are also sufficient to direct the secretion of an Npt reporter from Y. enterocolitica, indicating that a universal targeting signal is recognized by the type III secretion systems of both plant and animal pathogens.

Cloning of an arylalkylamine N-acetyltransferase (aaNAT1) from Drosophila melanogaster expressed in the nervous system and the gut.

In insects, neurotransmitter catabolism, melatonin precursor formation, and sclerotization involve arylalkylamine N-acetyltransferase (aaNAT, EC 2.3.1.87) activity. It is not known if one or multiple aaNAT enzymes are responsible for these activities. We recently have purified an aaNAT from Drosophila melanogaster. Here, we report the cloning of the corresponding aaNAT cDNA (aaNAT1) that upon COS cell expression acetylates dopamine, tryptamine, and the immediate melatonin precursor serotonin. aaNAT1 represents a novel gene family unrelated to known acetyl-transferases, except in two weakly conserved amino acid motifs. In situ hybridization studies of aaNAT1 mRNA in embryos reveal hybridization signals in the brain, the ventral cord, the gut, and probably in oenocytes, indicating a broad tissue distribution of aaNAT1 transcripts. Moreover, in day/ night studies we demonstrate a diurnal rhythm of melatonin concentration without a clear-cut change in aaNAT1 mRNA levels. The data suggest that tissue-specific regulation of aaNAT1 may be associated with different enzymatic functions and do not exclude the possibility of additional aaNAT genes.

Disruption of the Cbfa2 gene causes necrosis and hemorrhaging in the central nervous system and blocks definitive hematopoiesis.

The CBFA2 (AML1) gene encodes a DNA-binding subunit of the heterodimeric core-binding factor. The CBFA2 gene is disrupted by the (8;21), (3;21), and (12;21) chromosomal translocations associated with leukemias and myelodysplasias in humans. Mice lacking a CBF alpha 2 protein capable of binding DNA die between embryonic days 11.5 and 12.5 due to hemorrhaging in the central nervous system (CNS), at the nerve/CNS interfaces of cranial and spinal nerves, and in somitic/intersomitic regions along the presumptive spinal cord. Hemorrhaging is preceded by symmetric, bilateral necrosis in these regions. Definitive erythropoiesis and myelopoiesis do not occur in Cbfa2-deficient embryos, and disruption of one copy of the Cbfa2 gene significantly reduces the number of progenitors for erythroid and myeloid cells.

Coupling the phosphotransferase system and the methyl-accepting chemotaxis protein-dependent chemotaxis signaling pathways of Escherichia coli.

Chemotactic responses in Escherichia coli are typically mediated by transmembrane receptors that monitor chemoeffector levels with periplasmic binding domains and communicate with the flagellar motors through two cytoplasmic proteins, CheA and CheY. CheA autophosphorylates and then donates its phosphate to CheY, which in turn controls flagellar rotation. E. coli also exhibits chemotactic responses to substrates that are transported by the phosphoenolpyruvate (PEP)-dependent carbohydrate phosphotransferase system (PTS). Unlike conventional chemoreception, PTS substrates are sensed during their uptake and concomitant phosphorylation by the cell. The phosphoryl groups are transferred from PEP to the carbohydrates through two common intermediates, enzyme I (EI) and phosphohistidine carrier protein (HPr), and then to sugar-specific enzymes II. We found that in mutant strains HPr-like proteins could substitute for HPr in transport but did not mediate chemotactic signaling. In in vitro assays, these proteins exhibited reduced phosphotransfer rates from EI, indicating that the phosphorylation state of EI might link the PTS phospho-relay to the flagellar signaling pathway. Tests with purified proteins revealed that unphosphorylated EI inhibited CheA autophosphorylation, whereas phosphorylated EI did not. These findings suggest the following model for signal transduction in PTS-dependent chemotaxis. During uptake of a PTS carbohydrate, EI is dephosphorylated more rapidly by HPr than it is phosphorylated at the expense of PEP. Consequently, unphosphorylated EI builds up and inhibits CheA autophosphorylation. This slows the flow of phosphates to CheY, eliciting an up-gradient swimming response by the cell.

Identification of a second homolog of N-ethylmaleimide-sensitive fusion protein that is expressed in the nervous system and secretory tissues of Drosophila.

N-Ethylmaleimide-sensitive fusion protein (NSF) is an ATPase known to have an essential role in intracellular membrane transport events. Recently, cDNA clones encoding a Drosophila melanogaster homolog of this protein, named dNSF, were characterized and found to be expressed in the nervous system. We now report the identification of a second homolog of NSF, called dNSF-2 within this species and report evidence that this ubiquitous and widely utilized fusion protein belongs to a multigene family. The predicted amino acid sequence of dNSF-2 is 84.5% identical to dNSF (hereafter named dNSF-1), 59% identical to NSF from Chinese hamster, and 38.5% identical to the yeast homolog SEC18. The highest similarity was found in a region of dNSF-2 containing one of two ATP-binding sites; this region is most similar to members of a superfamily of ATPases. dNSF-2 is localized to a region between bands 87F12 and 88A3 on chromosome 3, and in situ hybridization techniques revealed expression in the nervous system during embryogenesis and in several imaginal discs and secretory structures in the larvae. Developmental modulation of dNSF-2 expression suggests that quantitative changes in the secretory apparatus are important in histogenesis.

Pleasant sweeping grooming touch in rhesus monkey: effects on autonomic nervous system and its codification in posterior insular and secondary somatosensory cortex

Il tatto assume un'importanza fondamentale nella vita quotidiana, in quanto ci permette di discriminare le caratteristiche fisiche di un oggetto specifico, di identificarlo e di eventualmente integrare le suddette informazioni tattili con informazioni provenienti da altri canali sensoriali. Questa è la componente sensoriale-discriminativa del tatto. Tuttavia quotidianamente il tatto assume un ruolo fondamentale durante le diverse interazioni sociali, positive, come quando abbracciamo o accarezziamo una persona con cui abbiamo un rapporto affettivo e negative, per esempio quando allontaniamo una persona estranea dal nostro spazio peri-personale. Questa componente è la cosiddetta dimensione affettiva-motivazionale, la quale determina la codifica della valenza emotiva che l'interazione assume. Questa componente ci permette di creare, mantenere o distruggere i legami sociali in relazione al significato che il tocco assume durante l'interazione. Se per esempio riceviamo una carezza da un familiare, questa verrà percepita come piacevole e assumerà un significato affiliativo. Questo tipo di tocco è comunente definito come Tocco Sociale (Social Touch). Gli aspetti discriminativi del tatto sono stati ben caratterizzati, in quanto storicamente, il ruolo del tatto è stato considerato quello di discriminare le caratteristiche di ciò che viene toccato, mentre gli aspetti affettivi sono stati solo recentemente indagati considerando la loro importanza nelle interazioni sociali. Il tocco statico responsabile dell'aspetto discriminante attiva a livello della pelle le grandi fibre mieliniche (Aβ), modulando a livello del sistema nervoso centrale le cortecce sensoriali, sia primarie che secondarie. Questo permette la codifica a livello del sistema nervoso centrale delle caratteristiche fisiche oggettive degli oggetti toccati. Studi riguardanti le caratteristiche del tocco affiliativo sociale hanno messo in evidenza che suddetta stimolazione tattile 1) è un particolare tocco dinamico che avviene sul lato peloso delle pelle con una velocità di 1-10 cm/sec; 2) attiva le fibre amieliniche (fibre CT o C-LTMRs); 3) induce positivi effetti autonomici, ad esempio la diminuzione della frequenza cardiaca e l'aumento della variabilità della frequenza cardiaca; e 4) determina la modulazione di regioni cerebrali coinvolte nella codifica del significato affiliativo dello stimolo sensoriale periferico, in particolare la corteccia insulare. Il senso del tatto, con le sue due dimensioni discriminativa e affiliativa, è quotidianamente usato non solo negli esseri umani, ma anche tra i primati non umani. Infatti, tutti i primati non umani utilizzano la componente discriminativa del tatto per identificare gli oggetti e il cibo e l'aspetto emotivo durante le interazioni sociali, sia negative come durante un combattimento, che positive, come durante i comportamenti affiliativi tra cui il grooming. I meccanismi di codifica della componente discriminativa dei primati non umani sono simili a quelli umani. Tuttavia, si conosce ben poco dei meccanismi alla base della codifica del tocco piacevole affiliativo. Pur essendo ben noto che i meccanorecettori amilienici C-LTMRs sono presenti anche sul lato peloso della pelle dei primati non umani, attualmente non ci sono studi riguardanti la correlazione tra il tocco piacevole e la loro modulazione, come invece è stato ampiamente dimostrato nell'uomo. Recentemente è stato ipotizzato (Dunbar, 2010) il ruolo delle fibre C-LTMRs durante il grooming, in particolare durante il cosiddetto swepping. Il grooming è costituito da due azioni motorie, lo sweeping e il picking che vengono eseguite in modo ritmico. Durante lo sweeping la scimmia agente muove il pelo della scimmia ricevente con un movimento a mano aperta, per poter vedere il preciso punto della pelle dove eseguire il picking, ovvero dove prendere la pelle a livello della radice del pelo con le unghie dell'indice e del pollice e tirare per rimuovere parassiti o uova di parassiti e ciò che è rimasto incastrato nel pelo. Oltre il noto ruolo igenico, il grooming sembra avere anche una importante funzione sociale affiliativa. Come la carezza nella società umana, cosi il grooming tra i primati non umani è considerato un comportamento. Secondo l'ipotesi di Dunbar l'attivazione delle C-LTMRs avverrebbe durante lo sweeping e questo porta a supporre che lo sweeping, come la carezza umana, costituisca una componente affiliativa del grooming, determinando quindi a contribuire alla sua codifica come comportamento sociale. Fino ad ora non vi è però alcuna prova diretta a sostegno di questa ipotesi. In particolare, 1) la velocità cui viene eseguito lo sweeping è compatibile con la velocità di attivazione delle fibre CT nell'uomo e quindi con la velocità tipica della carezza piacevole di carattere sociale affiliativo (1-10 cm/sec)?; 2) lo sweeping induce la stessa modulazione del sistema nervoso autonomo in direzione della modulazione del sistema vagale, come il tocco piacevole nell'uomo, attraverso l'attivazione delle fibre CT?; 3) lo sweeping modula la corteccia insulare, cosi come il tocco piacevole viene codificato come affiliativo nell'uomo mediante le proiezioni delle fibre CT a livello dell'insula posteriore? Lo scopo del presente lavoro è quella di testare l'ipotesi di Dunbar sopra citata, cercando quindi di rispondere alle suddette domande. Le risposte potrebbero consentire di ipotizzare la somiglianza tra lo sweeping, caratteristico del comportamento affiliativo di grooming tra i primati non umani e la carezza. In particolare, abbiamo eseguito 4 studi pilota. Nello Studio 1 abbiamo valutato la velocità con cui viene eseguito lo sweeping tra scimmie Rhesus, mediante una analisi cinematica di video registrati tra un gruppo di scimmie Rhesus. Negli Studi 2 e 3 abbiamo valutato gli effetti sul sistema nervoso autonomo dello sweeping eseguito dallo sperimentatore su una scimmia Rhesus di sesso maschile in una tipica situazione sperimentale. La stimolazione tattile è stata eseguita a diverse velocità, in accordo con i risultati dello Studio 1 e degli studi umani che hanno dimostrato la velocità ottimale e non ottimale per l'attivazione delle C-LTMRs. In particolare, nello Studio 2 abbiamo misurato la frequenza cardiaca e la variabilità di questa, come indice della modulatione vagale, mentre nello Studio 3 abbiamo valutato gli effetti dello sweeping sul sistema nervoso autonomo in termini di variazioni di temperatura del corpo, nello specifico a livello del muso della scimmia. Infine, nello Studio 4 abbiamo studiato il ruolo della corteccia somatosensoriale secondaria e insulare nella codifica dello sweeping. A questo scopo abbiamo eseguito registrazioni di singoli neuroni mentre la medesima scimmia soggetto sperimentale dello Studio 2 e 3, riceveva lo sweeping a due velocità, una ottimale per l'attivazione delle C-LTMRs secondo gli studi umani e i risultati dei tre studi sopra citati, ed una non ottimale. I dati preliminari ottenuti, dimostrano che 1) (Studio 1) lo sweeping tra scimmie Rhesus viene eseguito con una velocità media di 9.31 cm/sec, all'interno dell'intervallo di attivazione delle fibre CT nell'uomo; 2) (Studio 2) lo sweeping eseguito dallo sperimentatore sulla schiena di una scimmia Rhesus di sesso maschile in una situazione sperimentale determina una diminuzione della frequenza cardiaca e l'aumento della variabilità della frequenza cardiaca se eseguito alla velocità di 5 e 10 cm/sec. Al contrario, lo sweeping eseguito ad una velocità minore di 1 cm/sec o maggiore di 10 cm/sec, determina l'aumento della frequenza cardiaca e la diminuzione della variabilità di questa, quindi il decremento dell'attivazione del sistema nervoso parasimpatico; 3) (Studio 3) lo sweeping eseguito dallo sperimentatore sulla schiena di una scimmia Rhesus di sesso maschile in una situazione sperimentale determina l'aumento della temperatura corporea a livello del muso della scimmia se eseguito alla velocità di 5-10 cm/sec. Al contrario, lo sweeping eseguito ad una velocità minore di 5 cm/sec o maggiore di 10 cm/sec, determina la diminuzione della temperatura del muso; 4) (Studio 4) la corteccia somatosensoriale secondaria e la corteccia insulare posteriore presentano neuroni selettivamente modulati durante lo sweeping eseguito ad una velocità di 5-13 cm/sec ma non neuroni selettivi per la codifica della velocità dello sweeping minore di 5 cm/sec. Questi risultati supportano l'ipotesi di Dunbar relativa al coinvolgimento delle fibre CT durante lo sweeping. Infatti i dati mettono in luce che lo sweeping viene eseguito con una velocità (9.31 cm/sec), simile a quella di attivazione delle fibre CT nell'uomo (1-10 cm/sec), determina gli stessi effetti fisiologici positivi in termini di frequenza cardiaca (diminuzione) e variabilità della frequenza cardiaca (incremento) e la modulazione delle medesime aree a livello del sistema nervoso centrale (in particolare la corteccia insulare). Inoltre, abbiamo dimostrato per la prima volta che suddetta stimolazione tattile determina l'aumento della temperatura del muso della scimmia. Il presente studio rappresenta la prima prova indiretta dell'ipotesi relativa alla modulazione del sistema delle fibre C-LTMRs durante lo sweeping e quindi della codifica della stimolazione tattile piacevole affiliativa a livello del sistema nervoso centrale ed autonomo, nei primati non umani. I dati preliminari qui presentati evidenziano la somiglianza tra il sistema delle fibre CT dell'uomo e del sistema C-LTMRs nei primati non umano, riguardanti il Social Touch. Nonostante ciò abbiamo riscontrato alcune discrepanze tra i risultati da noi ottenuti e quelli invece ottenuti dagli studi umani. La velocità media dello sweeping è di 9.31 cm / sec, rasente il limite superiore dell’intervallo di velocità che attiva le fibre CT nell'uomo. Inoltre, gli effetti autonomici positivi, in termini di battito cardiaco, variabilità della frequenza cardiaca e temperatura a livello del muso, sono stati evidenziati durante lo sweeping eseguito con una velocità di 5 e 10 cm/sec, quindi al limite superiore dell’intervallo ottimale che attiva le fibre CT nell’uomo. Al contrario, lo sweeping eseguito con una velocità inferiore a 5 cm/sec e superiore a 10 cm/sec determina effetti fisiologici negativo. Infine, la corteccia insula sembra essere selettivamente modulata dallo stimolazione eseguita alla velocità di 5-13 cm/sec, ma non 1-5 cm/sec. Quindi, gli studi sul sistema delle fibre CT nell’uomo hanno dimostrato che la velocità ottimale è 1-10 cm/sec, mentre dai nostri risultati la velocità ottimale sembra essere 5-13 cm / sec. Quindi, nonostante l'omologia tra il sistema delle fibre CT nell'umano deputato alla codifica del tocco piacevole affiliativo ed il sistema delle fibre C-LTMRs nei primati non umani, ulteriori studi saranno necessari per definire con maggiore precisione la velocità ottimale di attivazione delle fibre C-LTMR e per dimostrare direttamente la loro attivazione durante lo sweeping, mediante la misurazione diretta della loro modulazione. Studi in questa direzione potranno confermare l'omologia tra lo sweeping in qualità di tocco affiliativo piacevole tra i primati non umani e la carezza tra gli uomini. Infine, il presente studio potrebbe essere un importante punto di partenza per esplorare il meccanismo evolutivo dietro la trasformazione dello sweeping tra primati non umani, azione utilitaria eseguita durante il grooming, a carezza, gesto puramente affiliativo tra gli uomini.

Implementation of non-local boundary layer schemes in the Regional Atmospheric Modeling System and its impact on simulated mesoscale circulations

This paper proposes the implementation of different non-local Planetary Boundary Layer schemes within the Regional Atmospheric Modeling System (RAMS) model. The two selected PBL parameterizations are the Medium-Range Forecast (MRF) PBL and its updated version, known as the Yonsei University (YSU) PBL. YSU is a first-order scheme that uses non-local eddy diffusivity coefficients to compute turbulent fluxes. It is based on the MRF, and improves it with an explicit treatment of the entrainment. With the aim of evaluating the RAMS results for these PBL parameterizations, a series of numerical simulations have been performed and contrasted with the results obtained using the Mellor and Yamada (MY) scheme, also widely used, and the standard PBL scheme in the RAMS model. The numerical study carried out here is focused on mesoscale circulation events during the summer, as these meteorological situations dominate this season of the year in the Western Mediterranean coast. In addition, the sensitivity of these PBL parameterizations to the initial soil moisture content is also evaluated. The results show a warmer and moister PBL for the YSU scheme compared to both MRF and MY. The model presents as well a tendency to overestimate the observed temperature and to underestimate the observed humidity, considering all PBL schemes and a low initial soil moisture content. In addition, the bias between the model and the observations is significantly reduced moistening the initial soil moisture of the corresponding run. Thus, varying this parameter has a positive effect and improves the simulated results in relation to the observations. However, there is still a significant overestimation of the wind speed over flatter terrain, independently of the PBL scheme and the initial soil moisture used, even though a different degree of accuracy is reproduced by RAMS taking into account the different sensitivity tests.