Response surface analysis of extract yield and flavour intensity of Brazilian cherry (Eugenia uniflora L.) obtained by supercritical carbon dioxide extraction

This work evaluated the effect of pressure and temperature on yield and characteristic flavour intensity of Brazilian cherry (Eugenia uniflora L) extracts obtained by supercritical CO(2) using response surface analysis, which is a simple and efficient method for first inquiries. A complete central composite 2(2) factorial experimental design was applied using temperature (ranging from 40 to 60 degrees C) and pressure (from 150 to 250 bar) as independent variables. A second order model proved to be predictive (p <= 0.05) for the extract yield as affected by pressure and temperature, with better results being achieved at the central point (200 bar and 50 degrees C). For the flavour intensity, a first order model proved to be predictive (p <= 0.05) showing the influence of temperature. Greater characteristic flavour intensity in extracts was obtained for relatively high temperature (> 50 degrees C), Therefore, as far as Brazilian cherry is concerned, optimum conditions for achieving higher extract yield do not necessarily coincide to those for obtaining richer flavour intensity. Industrial relevance: Supercritical fluid extraction (SFE) is an emerging clean technology through which one may obtain extracts free from organic solvents. Extract yields from natural products for applications in food, pharmaceutical and cosmetic industries have been widely disseminated in the literature. Accordingly, two lines of research have industrial relevance, namely, (i) operational optimization studies for high SFE yields and (ii) investigation on important properties extracts are expected to present (so as to define their prospective industrial application). Specifically, this work studied the optimization of SFE process to obtain extracts from a tropical fruit showing high intensity of its characteristic flavour, aiming at promoting its application in natural aroma enrichment of processed foods. (C) 2008 Elsevier Ltd. All rights reserved.

Supercritical CO(2) extraction of carotenoids from pitanga fruits (Eugenia uniflora L.)

Supercritical carbon dioxide (SC-CO(2)) extraction was employed to extract carotenoids from the freeze-dried pulp of pitanga fruits (Eugenia uniflora L.), an exotic fruit, rich in carotenoids and still little explored commercially. The SC-CO(2) extraction was carried out at two temperatures, 40 and 60 degrees C, and seven pressures, 100, 150, 200, 250, 300, 350 and 400 bar. The carotenoids were determined by high-performance liquid chromatography connected to photodiode array and mass spectrometry detectors. Lycopene, rubixanthin and P-cryptoxanthin were the main carotenoids present in the freeze-dried pitanga pulp, whereas beta-cryptoxanthin concentration was negligible in the SC-CO(2) extracts, for all the investigated state conditions. The maximum recovery of carotenoids was obtained at 60 degrees C and 250 bar, extracting 55% of the total carotenoid content, 74% of the rubixanthin and 78% of the lycopene from the pulp. Under these state conditions, the total carotenoid concentration in the extract was 5474 mu g/g, represented by 66% lycopene and 32% rubixanthin. The experimental state conditions produced different SC-CO(2) extracts with respect to the extraction yield and concentration of different carotenoids, indicating that the supercritical carbon dioxide was selective in the extraction of the pitanga carotenoids as a function of temperature and pressure. (C) 2008 Elsevier B.V. All rights reserved.

A transiting giant planet with a temperature between 250 K and 430 K

Of the over 400 known(1) exoplanets, there are about 70 planets that transit their central star, a situation that permits the derivation of their basic parameters and facilitates investigations of their atmospheres. Some short-period planets(2), including the first terrestrial exoplanet(3,4) (CoRoT-7b), have been discovered using a space mission(5) designed to find smaller and more distant planets than can be seen from the ground. Here we report transit observations of CoRoT-9b, which orbits with a period of 95.274 days on a low eccentricity of 0.11 +/- 0.04 around a solar-like star. Its periastron distance of 0.36 astronomical units is by far the largest of all transiting planets, yielding a `temperate` photospheric temperature estimated to be between 250 and 430 K. Unlike previously known transiting planets, the present size of CoRoT-9b should not have been affected by tidal heat dissipation processes. Indeed, the planet is found to be well described by standard evolution models(6) with an inferred interior composition consistent with that of Jupiter and Saturn.

Lithothamnion superpositum (Corallinales; Rhodophyta): First description for the Western Atlantic or rediscovery of a species?

P>Nongeniculate Corallinaceae are poorly known in Brazil. In our endeavor to identify this group of seaweeds along the Brazilian coast we came across some specimens that fit well into the accepted circumscription of Litothamnion Heydrich. Within this genus they could be identified to what has been called L. superpositum Foslie. The specimens were represented by nongeniculate, free living specimens (rhodoliths); lumpy to fruticose growth-form, presenting flared epithallial cells in transversal section; multiporate tetrasporangial conceptacles, with roof protruding above or flush with the surrounding thallus surface; chambers 250-525 mu m in diameter and 150-230 mu m high, roof structured by filaments with 3-5 cells long; and pores in depression. Among the species described from the Brazilian coast, L. heteromorphum (Foslie) Foslie presented anatomical and reproductive characteristics similar to the referred species described from southern Africa and Australia. Therefore, we propose to consider L. heteromorphum as a heterotypic synonym of L. superpositum and extending its distribution to the Western Atlantic.

A portable Compton spectrometer for clinical X-ray beams in the energy range 20-150 keV

Primary beam spectra were obtained for an X-ray industrial equipment (40-150 kV), and for a clinical mammography apparatus (25-35 kV) from beams scattered at angles close to 90 degrees, measured with a CdTe Compton spectrometer. Actual scattering angles were determined from the Compton energy shift of characteristic X-rays or spectra end-point energy. Evaluated contribution of coherent scattering amounts to more than 15% of fluence in mammographic beams. This technique can be used in clinical environments. (C) 2010 Elsevier Ltd. All rights reserved.

The electronic and optical properties of sodalite (Na(8)Al(6)Si(6)O(24)Cl(2)) from first principles

This study reports the results of ab initio electronic and optical calculations for pure socialite crystal using the linear augmented plane wave (LAPW) method within density functional theory (DFT). The calculated electronic structure revealed predominantly orbital characters of the valence band and the conduction band, and enabled us to determine the type and the value of the fundamental gap of the compound. The imaginary part of the dielectric tensor, extinction coefficient and refraction index were calculated as functions of the incident radiation wavelength. It is shown that the O 2p states and Na 3s states play the major role in optical transitions as initial and final states, respectively. The absorption spectrum is localized in the ultraviolet range between 40 and 250 nm. Furthermore, we concluded that the material does not absorb radiation in the visible range. (C) 2009 Elsevier Ltd. All rights reserved.

Fabrication and integration of planar electrodes for contactless conductivity detection on polyester-toner electrophoresis microchips

In this report, we describe the microfabrication and integration of planar electrodes for contactless conductivity detection on polyester-toner (PT) electrophoresis microchips using toner masks. Planar electrodes were fabricated by three simple steps: (i) drawing and laser-printing the electrode geometry on polyester films, (ii) sputtering deposition onto substrates, and (iii) removal of toner layer by a lift-off process. The polyester film with anchored electrodes was integrated to PT electrophoresis microchannels by lamination at 120 degrees C in less than 1 min. The electrodes were designed in an antiparallel configuration with 750 mu m width and 750 gm gap between them. The best results were recorded with a frequency of 400 kHz and 10 V-PP using a sinusoidal wave. The analytical performance of the proposed microchip was evaluated by electrophoretic separation of potassium, sodium and lithium in 150 mu m wide x 6 mu m deep microchannels. Under an electric field of 250 V/cm the analytes were successfully separated in less than 90 s with efficiencies ranging from 7000 to 13 000 plates. The detection limits (S/N = 3) found for K+, Na+, and Li+ were 3.1, 4.3, and 7.2 mu mol/L, respectively. Besides the low-cost and instrumental simplicity, the integrated PT chip eliminates the problem of manual alignment and gluing of the electrodes, permitting more robustness and better reproducibility, therefore, more suitable for mass production of electrophoresis microchips.

Estudo de pelotização e briquetagem de finos de carvão mineral

O aumento da produção de carvão previsto para os próximos anos nas minas da CRM localizadas em Leão, Butiá, RS, originará uma considerável quantidade de finos beneficiados por ciclonagem autôgena. Estes finos caracterizam-se pelos seus altos teores de umidade e granulometria <1 mm o que onera e dificulta os processos de manuseio, estocagem e transporte. O presente estudo visa à análise comparativa dos processos de aglomeração, a briquetagem e a pelotização com o objetivo de obter um produto com melhores características de comercialização do que o atual. As principais variáveis estudadas na aglomeração por briquetagem foram: teor de umidade, tipo e concentração de agente ligante, relação massa/volume de carvão, tempo e pressão de moldagem. Os melhores resultados em termos de resistência à compressão, foram obtidos utilizando um resíduo de refinaria de petróleo - REVAC - como ligante numa concentração de 10% em peso, uma temperatura de cura de 120° C, um tempo de moldagem de 0,5 minutos e uma pressão de compactação entre 150 e 250 kgf/cm². A pelotização foi estudada utilizando um tambor e um disco de laboratório e as principais variáveis estudadas foram: umidade da alimentação, tipo e concentração de agente ligante, temperatura de cura e outras. Os melhores resultados foram obtidos utilizando como ligante MOGUL (amido de milho pré-gelatinizado em pó) numa concentração de 5% em peso, uma faixa de umidade ótima entre 30 e 40%, uma inclinação do disco entre 45 e 51° e uma temperatura de cura de 80 e 100°C. Os resultados obtidos para ambos os carvões (CE 5900 e CE 4700) são discutidos em termos dos diversos fenômenos que ocorrem na interface carvão-solução-ligante e algumas considerações econômicas são apresentadas.

Aspiração folicular por via transvaginal guiada por ultrasom em eqüinos.

A técnica de aspiração folicular transvaginal guiada por ultra-som (TUGA) foi utilizada pela primeira vez em reprodução assistida de eqüinos em 1992 e desde então vem sendo aperfeiçoada. Com o crescente interesse nos procedimentos de transferência de oócitos (TO), transferência de gametas intrafallopiana (GIFT) e mais recentemente na transferência nuclear (TN), a recuperação de oócitos de boa qualidade tornou-se um passo fundamental do processo. Diversas técnicas e equipamentos podem ser empregados com esta finalidade. Os experimentos foram conduzidos com o objetivo de avaliar a taxa de recuperação de oócitos de folículos pré-ovulatórios de cinco protocolos de punções. Dois níveis de pressão negativa: Baixa (B) (150 – 200 mmHg) e Alta (A) (250 – 300 mmHg) e três modelos de agulha: curta 14 G (C14); curta 18 G (C18) e longa 18 G (L18) foram testados. Cinqüenta e quatro folículos de 48 éguas foram aspirados. Estes animais foram distribuídos completamente ao acaso em cinco grupos experimentais (G) GI: (B-C14) (n=22); GII: (B-L18) (n=3); GIII: (B-L18) (n=18); GIV: (A-C18) (n=5); GV: (A-L18) (n=6). Vinte e duas éguas receberam 2500 UI de hCG, 14 tiveram seus folículos aspirados e 2 oócitos foram recuperados (14,3%) Dos 54 folículos aspirados, 4 oócitos foram recuperados (7,41%): GI (n=1), GIII (n=1) e GIV (n=2). Três destes oócitos foram transferidos para o oviduto de éguas receptoras através das técnicas de GIFT (n=2) e TO (n=1). Não foi observado desenvolvimento embrionário nas receptoras nos 14, 15 e 16 dias pós-transferência.

Posse e eleição do novo Congresso geram mais de 150 mil menções nas redes sociais

O início de um novo período parlamentar na Câmara dos Deputados e no Senado, neste fim de semana, em Brasília, mobilizou as redes sociais – sobretudo domingo, em virtude das polêmicas eleições para as presidências das duas casas legislativas. Favoritos, o deputado federal Eduardo Cunha (PMDB-RJ) e o senador Renan Calheiros (PMDB-AL) venceram as respectivas disputas, com ampla repercussão no Twitter ao longo dos últimos dois dias.

Efeito do tratamento por plasma na proliferação de fibroblastos e esterilização de membranas de quitosana

Chitosan is being studied for use as dressing due their biological properties. Aiming to expand the use in biomedical applications, chitosan membranes were modified by plasma using the following gases: nitrogen (N2), methane (CH4), argon (Ar), oxygen (O2) and hydrogen (H2). The samples were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), contact angle, surface energy and water absorption test. Biological Tests were also performed, such as: test sterilization and proliferation of fibroblasts (3T3 line). Through SEM we observed morphological changes occurring during the plasma treatment, the formation of micro and nano-sized valleys. MFA was used to analyze different roughness parameters (Ra, Rp, Rz) and surface topography. It was found that the treated samples had an increase in surface roughness and sharp peaks. Methane plasma treatment decreased the hydrophilicity of the membranes and also the rate of water absorption, while the other treatments turned the membranes hydrophilic. The sterilization was effective in all treatment times with the following gases: Ar, N2 and H2. With respect to proliferation, all treatments showed an improvement in cell proliferation increased in a range 150% to 250% compared to untreated membrane. The highlights were the treatments with Ar 60 min, O2 60 min, CH4 15 min. Observing the results of the analyzes performed in this study, it appears that there is no single parameter that influences cell proliferation, but rather a set of ideal conditions that favor cell proliferation

Transporte de juvenis de curimbatá Prochilodus lineatus em diferentes densidades

Transportation of curimbata Prochilodus lineatus juveniles in different densities. Tins study evaluated the effects of curimbata Prochilodus lineatus transportation in three densities (100, 150 and 250 g L-1) on survival, metabolic, ionic and hematological (red series) variables Curimbata juveniles were transported in plastic bag during six hours, and sampled before packing, immediately after die arrival, 24 and 96 hours after transportation During recovery, higher mortality was seen in fish transported in die highest density Water variables, such as conductivity and total ammonia, presented increased values as density increased (p < 005). whereas the opposite occurred with dissolved oxygen Glucose level observed in the arrival was high, significantly reducing after 96 hours Among ionic variables, chloride decreased in higher fish densities and according to sampling times Red series hematological variables, such as hematocrit, red blood cell and hemoglobin, Increased in arrival, but diminished 96 hours after transportation There were no significant differences in the interaction between density and time of sampling for mentioned variables 250 g L-1 density induced the highest mortality rate and the worst variables values measured 96 hours of recovery after the stressing event was enough to return to initial values for hematological variables, but was not sufficient to return to initial values for metabolic and ionic variables.

Benzocaine and eugenol as anesthetics for Brycon hilarii

A utilização de produtos anestésicos durante práticas de manejo é frequentemente empregada, porém doses corretas de diferentes fármacos e para espécies distintas ainda estão em fases de pesquisa. O objetivo do estudo foi determinar a melhor concentração de benzocaína e eugenol para juvenis de piraputanga (B. hilarii). Foram utilizados 104 juvenis de piraputanga com peso médio de 50,04 ± 20,80 g e comprimento total médio de 16,30 ± 12,32 cm adquiridos em uma piscicultura comercial localizada na região Oeste do Estado do Paraná. O trabalho foi conduzido no Laboratório de Aquicultura do Grupo de Estudos de Manejo na Aquicultura - GEMAq da Universidade Estadual do Oeste do Paraná (UNIOESTE). Os animais foram submetidos a cinco concentrações de benzocaína (50,0; 100,0; 150,0; 200,0 e 250,0 mg L-1) e sete concentrações de eugenol (50,0; 100,0; 150,0; 200,0; 250,0; 300,0 e 350 mg L-1), para a aferição dos tempos referentes à letargia. Para a recuperação, os animais foram mantidos em aquários livre do anestésico e observado o tempo em que retornaram às atividades normais. A melhor dose de benzocaína verificada foi de 100 mg L-1, enquanto a melhor dose de eugenol foi entre 100 e 150 mg L-1.