Virtual training environments to improve train driver's crisis decision making

This paper reports on a current research project in which virtual reality simulators are being investigated as a means of simulating hazardous Rail work conditions in order to allow train drivers to practice decision-making under stress. When working under high stress conditions train drivers need to move beyond procedural responses into a response activated through their own problem-solving and decision-making skills. This study focuses on the use of stress inoculation training which aims to build driver’s confidence in the use of new decision-making skills by being repeatedly required to respond to hazardous driving conditions. In particular, the study makes use of a train cab driving simulator to reproduce potentially stress inducing real-world scenarios. Initial pilot research has been undertaken in which drivers have experienced the training simulation and subsequently completed surveys on the level of immersion experienced. Concurrently drivers have also participated in a velocity perception experiment designed to objectively measure the fidelity of the virtual training environment. Baseline data, against which decision-making skills post training will be measured, is being gathered via cognitive task analysis designed to identify primary decision requirements for specific rail events. While considerable efforts have been invested in improving Virtual Reality technology, little is known about how to best use this technology for training personnel to respond to workplace conditions in the Rail Industry. To enable the best use of simulators for training in the Rail context the project aims to identify those factors within virtual reality that support required learning outcomes and use this information to design training simulations that reliably and safely train staff in required workplace accident response skills.

Enhancing experiential learning via virtual environments

Research indicates Virtual Reality (VR) is delivering on it's promised potential to provide enhanced training and education outcomes. A significant research project, at the University of Queensland, has constructed a number of virtual contexts in which the phenomena experienced by patients who have psychosis are reproduced for use in psychiatry education. Symptoms of psychosis reproduced include delusions, hallucinations and thought disorder. The new software enables psychiatry students to experience the inner world of a patient with psychosis. Lecturers in psychiatry report VR has the potential to enhance student's abilities to actually 'feel' the types of emotions and physiological reactions a hallucination precipitates in a patient. The current work of the project and stages of software development will be demonstrated. The virtual environments provide a new method of delivering experiential learning opportunities to higher education classrooms.

Knowledge-based Virtual Reconstruction of Museum Artifacts

Within the framework of heritage preservation, 3D scanning and modeling for heritage documentation has increased significantly in recent years, mainly due to the evolution of laser and image-based techniques, modeling software, powerful computers and virtual reality. 3D laser acquisition constitutes a real development opportunity for 3D modeling based previously on theoretical data. The representation of the object information rely on the knowledge of its historic and theoretical frame to reconstitute a posteriori its previous states. This project proposes an approach dealing with data extraction based on architectural knowledge and Laser statement informing measurements, the whole leading to 3D reconstruction. The experimented Khmer objects are exposed at Guimet museum in Paris. The purpose of this digital modeling meets the need of exploitable models for simulation projects, prototyping, exhibitions, promoting cultural tourism and particularly for archiving against any likely disaster and as an aided tool for the formulation of virtual museum concept.

Becoming Other: Virtual Realities in Contemporary Science Fiction

The purpose of this thesis was to explore the boundary between human and other created by virtual worlds in contemporary science fiction novels. After a close reading of the three novels: Surface Detail, Existence, and Lady of Mazes, and the application of contemporary literary theories, the boundary presented itself and led to the discovery of where the human becomes other. The human becomes other when it becomes lost to the virtual world and no longer exists or interacts with material reality. Each of the primary texts exhibits both virtual reality and humanity in different ways, and each is explored to find where humanity falls apart. Overall, when these theories are applied to real life there is no real way to avoid the potential for fully immersive virtual worlds, but there are ways to avoid their alienating effects.

Atividade eletroencefalográfica de pacientes com acidente vascular cerebral na aprendizagem motora de um jogo baseado em realidade virtual

Stroke is the leading cause of long-term disability among adults and motor relearning is essential in motor sequelae recovery. Therefore, various techniques have been proposed to achieve this end, among them Virtual Reality. The aim of the study was to evaluate electroencephalographic activity of stroke patients in motor learning of a virtual reality-based game. The study included 10 patients with chronic stroke, right-hande; 5 with left brain injury (LP), mean age 48.8 years (± 4.76) and 5 with injury to the right (RP), mean age 52 years (± 10.93). Participants were evaluated for electroencephalographic (EEG) activity and performance while performing 15 repetitions of darts game in XBOX Kinect and also through the NIHSS, MMSE, Fugl-Meyer and the modified Ashworth scale. Patients underwent a trainning with 45 repetitions of virtual darts game, 12 sessions in four weeks. After training, patients underwent reassessment of EEG activity and performance in virtual game of darts (retention). Data were analyzed using ANOVA for repeated measures. According to the results, there were differences between the groups (PD and PE) in frequencies Low Alpha (p = 0.0001), High Alpha (p = 0.0001) and Beta (p = 0.0001). There was an increase in alpha activation powers and a decrease in beta in the phase retention of RP group. In LP group was observed increased alpha activation potency, but without decrease in beta activation. Considering the asymmetry score, RP group increased brain activation in the left hemisphere with the practice in the frontal areas, however, LP group had increased activation of the right hemisphere in fronto-central areas, temporal and parietal. As for performance, it was observed a decrease in absolute error in the game for RP group between assessment and retention (p = 0.015), but this difference was not observed for LP group (p = 0.135). It follows then that the right brain injury patients benefited more from darts game training in the virtual environment with respect to the motor learning process, reducing neural effort in ipsilesionais areas and errors with the practice of the task. In contrast, patients with lesions in left hemisphere decrease neural effort in contralesionais areas important for motor learning and showed no performance improvements with practice of 12 sessions of virtual dart game. Thus, the RV can be used in rehabilitation of stroke patients upper limb, but the laterality of the injury should be considered in programming the motor learning protocol.

Instrumento de avaliação de processos cognitivos para a aprendizagem de subestações de energia em ambientes 2D e realidade virtual

This study describes the development of a prototype to evaluate the potential of environments based on two-dimensional modeling and virtual reality as power substations learning objects into training environments from a central operation and control of power utility Cemig. Initially, there was an identification modeling features and cognitive processes in 2D and RV, from which it was possible to create frames that serve to guide the preparation of a checklist with assigning a metric weight for measuring cognitive potential learning in the study sites. From these contents twenty-four questions were prepared and each was assigned a weight that was used in the calculation of the metric; the questions were grouped into skill sets and similar cognitive processes called categories. Were then developed two distinct environments: the first, the prototype features an interactive checklist and your individual results. And, second, a system of data management environment for the configuration and editing of the prototype, and the observation and analysis of the survey results. For prototype validation, were invited to access the virtual checklist and answer it, five professionals linked to Cemig's training area. The results confirmed the validity of this instrument application to assess the possible potential of modeling in 2D and RV as learning objects in power substations, as well as provide feedback to developers of virtual environments to improve the system.

Design and Implementation of a Low Cost Virtual Rugby Decision Making Interactive

The paper describes the design and implementation of a novel low cost virtual rugby decision making interactive for use in a visitor centre. Original laboratory-based experimental work in decision making in rugby, using a virtual reality headset [1] is adapted for use in a public visitor centre, with consideration given to usability, costs, practicality and health and safety. Movement of professional rugby players was captured and animated within a virtually recreated stadium. Users then interact with these virtual representations via use of a lowcost sensor (Microsoft Kinect) to attempt to block them. Retaining the principles of perception and action, egocentric viewpoint, immersion, sense of presence, representative design and game design the system delivers an engaging and effective interactive to illustrate the underlying scientific principles of deceptive movement. User testing highlighted the need for usability, system robustness, fair and accurate scoring, appropriate level of difficulty and enjoyment.

Real-time depth camera tracking with CAD models and ICP

In recent years, depth cameras have been widely utilized in camera tracking for augmented and mixed reality. Many of the studies focus on the methods that generate the reference model simultaneously with the tracking and allow operation in unprepared environments. However, methods that rely on predefined CAD models have their advantages. In such methods, the measurement errors are not accumulated to the model, they are tolerant to inaccurate initialization, and the tracking is always performed directly in reference model's coordinate system. In this paper, we present a method for tracking a depth camera with existing CAD models and the Iterative Closest Point (ICP) algorithm. In our approach, we render the CAD model using the latest pose estimate and construct a point cloud from the corresponding depth map. We construct another point cloud from currently captured depth frame, and find the incremental change in the camera pose by aligning the point clouds. We utilize a GPGPU-based implementation of the ICP which efficiently uses all the depth data in the process. The method runs in real-time, it is robust for outliers, and it does not require any preprocessing of the CAD models. We evaluated the approach using the Kinect depth sensor, and compared the results to a 2D edge-based method, to a depth-based SLAM method, and to the ground truth. The results show that the approach is more stable compared to the edge-based method and it suffers less from drift compared to the depth-based SLAM.

Real, rubber or virtual: The vision of “one’s own” body as a means for pain modulation. A narrative review

In the last few years a branch of pain research has been focussing on the modulatory effects of the vision of the body on pain perception. So, for instance, the vision of one’s own real body has been proven to induce analgesic effects. On the other hand, bodily illusions such as the rubber hand illusion have provided new tools for the study of perceptual processes during altered body ownership states. Recently, new paradigms of body ownership made use of a technology that is going places both in clinical and in experimental settings, i.e. virtual reality. While the vision of one’s own real body has been proven to yield compelling analgesic effects, slightly more controversial are those attributed to the vision of “owned” dummy bodies. This review will discuss the studies that examined the effects on pain perception of the vision of the own body, with or without body ownership illusions.