From the Lisbon strategy to EU2020: illusion or progress for european economies?

To be published at Krings, Bettina-J. ed. (2011), Brain Drain or Brain Gain? Changes of Work in Knowledge-based Societies, Berlin, Ed. Sigma. The author wants to thanks the comments and suggestions from Bettina Krings and Sylke Wintzer. They are not, however, responsible for the final result.

Technology market transfer plan launch of DELIVES to E.U. Market©

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Biotecnologia

Backside-surface imprinting as a new strategy to generate specific plastic antibody materials

A backside protein-surface imprinting process is presented herein as a novel way to generate specific synthetic antibody materials. The template is covalently bonded to a carboxylated-PVC supporting film previously cast on gold, let to interact with charged monomers and surrounded next by another thick polymer. This polymer is then covalently attached to a transducing element and the backside of this structure (supporting film plus template) is removed as a regular “tape”. The new sensing layer is exposed after the full template removal, showing a high density of re-binding positions, as evidenced by SEM. To ensure that the templates have been efficiently removed, this re-binding layer was cleaned further with a proteolytic enzyme and solution washout. The final material was named MAPS, as in the back-side reading of SPAM, because it acts as a back-side imprinting of this recent approach. It was able to generate, for the first time, a specific response to a complex biomolecule from a synthetic material. Non-imprinted materials (NIMs) were also produced as blank and were used as a control of the imprinting process. All chemical modifications were followed by electrochemical techniques. This was done on a supporting film and transducing element of both MAPS and NIM. Only the MAPS-based device responded to oxLDL and the sensing layer was insensitive to other serum proteins, such as myoglobin and haemoglobin. Linear behaviour between log(C, μg mL−1) versus charged tranfer resistance (RCT, Ω) was observed by electrochemical impedance spectroscopy (EIS). Calibrations made in Fetal Calf Serum (FCS) were linear from 2.5 to 12.5 μg mL−1 (RCT = 946.12 × log C + 1590.7) with an R-squared of 0.9966. Overall, these were promising results towards the design of materials acting close to the natural antibodies and applied to practical use of clinical interest.

Voltammetric analysis of mancozeb and its degradation product ethylenethiourea

The purpose of this work was to develop a reliable alternative method for the determination of the dithiocarbamate pesticide mancozeb (MCZ) in formulations. Furthermore, a method for the analysis of MCZ's major degradation product, ethylenethiourea (ETU), was also proposed. Cyclic voltammetry was used to characterize the electrochemical behavior of MCZ and ETU, and square-wave adsorptive stripping voltammetry (SWAdSV) was employed for MCZ quantification in commercial formulations. It was found that both MCZ and ETU are irreversibly reduced (− 0.6 V and − 0.5 V vs Ag/AgCl, respectively) at the surface of a glassy carbon electrode in a mainly diffusion-controlled process, presenting maximum peak current intensities at pH 7.0 (in phosphate buffered saline electrolyte). Several parameters of the SWAdSV technique were optimized and linear relationships between concentration and peak current intensity were established between 10–90 μmol L− 1 and 10–110 μmol L− 1 for MCZ and ETU, respectively. The limits of detection were 7.0 μmol L− 1 for MCZ and 7.8 μmol L− 1 for ETU. The optimized method for MCZ was successfully applied to the quantification of this pesticide in two commercial formulations. The developed procedures provided accurate and precise results and could be interesting alternatives to the established methods for quality control of the studied products, as well as for analysis of MCZ and ETU in environmental samples.

Is mental practice an effective adjunct therapeutic strategy for upper limb motor restoration after stroke? A systematic review and meta- analysis

Stroke is one of the most common conditions requiring rehabilitation, and its motor impairments are a major cause of permanent disability. Hemiparesis is observed by 80% of the patients after acute stroke. Neuroimaging studies showed that real and imagined movements have similarities regarding brain activation, supplying evidence that those similarities are based on the same process. Within this context, the combination of mental practice (MP) with physical and occupational therapy appears to be a natural complement based on neurorehabilitation concepts. Our study seeks to investigate if MP for stroke rehabilitation of upper limbs is an effective adjunct therapy. PubMed (Medline), ISI knowledge (Institute for Scientific Information) and SciELO (Scientific Electronic Library) were terminated on 20 February 2015. Data were collected on variables as follows: sample size, type of supervision, configuration of mental practice, setting the physical practice (intensity, number of sets and repetitions, duration of contractions, rest interval between sets, weekly and total duration), measures of sensorimotor deficits used in the main studies and significant results. Random effects models were used that take into account the variance within and between studies. Seven articles were selected. As there was no statistically significant difference between the two groups (MP vs control), showed a - 0.6 (95% CI: -1.27 to 0.04), for upper limb motor restoration after stroke. The present meta-analysis concluded that MP is not effective as adjunct therapeutic strategy for upper limb motor restoration after stroke.

PIASA: A power and interference aware resource management strategy for heterogeneous workloads in cloud data centers

Cloud data centers have been progressively adopted in different scenarios, as reflected in the execution of heterogeneous applications with diverse workloads and diverse quality of service (QoS) requirements. Virtual machine (VM) technology eases resource management in physical servers and helps cloud providers achieve goals such as optimization of energy consumption. However, the performance of an application running inside a VM is not guaranteed due to the interference among co-hosted workloads sharing the same physical resources. Moreover, the different types of co-hosted applications with diverse QoS requirements as well as the dynamic behavior of the cloud makes efficient provisioning of resources even more difficult and a challenging problem in cloud data centers. In this paper, we address the problem of resource allocation within a data center that runs different types of application workloads, particularly CPU- and network-intensive applications. To address these challenges, we propose an interference- and power-aware management mechanism that combines a performance deviation estimator and a scheduling algorithm to guide the resource allocation in virtualized environments. We conduct simulations by injecting synthetic workloads whose characteristics follow the last version of the Google Cloud tracelogs. The results indicate that our performance-enforcing strategy is able to fulfill contracted SLAs of real-world environments while reducing energy costs by as much as 21%.

Crowdsourcing innovation: a strategy to leverage enterprise innovation

Innovation is recognized by academics and practitioners as an essential competitive enabler for any company to survive, to remain competitive and to grow. Investments in tasks of R&D have not always brought the expected results. But that doesn't mean that the outcomes would not be useful to other companies of the same business area or even from another area. Thus, there is much knowledge already available in the market that can be helpful to some and profitable to others. So, the ideas and expertise can be found outside a company's boundaries and also exported from within. Information, knowledge, experience, wisdom is already available in the millions of the human beings of this planet, the challenge is to use them through a network to produce new ideas and tips that can be useful to a company with less costs. This was the reason for the emergence of the area of crowdsourcing innovation. Crowdsourcing innovation is a way of using the Web 2.0 tools to generate new ideas through the heterogeneous knowledge available in the global network of individuals highly qualified and with easy access to information and technology. So, a crowdsourcing innovation broker is an organization that mediates the communication and relationship between the seekers - companies that aspire to solve some problem or to take advantage of any business opportunity - with a crowd that is prone to give ideas based on their knowledge, experience and wisdom. This paper makes a literature review on models of open innovation, crowdsourcing innovation, and technology and knowledge intermediaries, and discusses this new phenomenon as a way to leverage the innovation capacity of enterprises. Finally, the paper outlines a research design agendafor explaining crowdsourcing innovation brokering phenomenon, exploiting its players, main functions, value creation process, and knowledge creation in order to define a knowledge metamodel of such intermediaries.

A internacionalização do setor bancário português

O processo de globalização, na esfera dos mercados financeiros, exigiu às instituições bancárias opções de investimento estratégico na plataforma internacional. O movimento de implantação dos bancos portugueses no estrangeiro acompanhou esse processo, permitindo a oferta de serviços bancários de captação e financiamento nos principais mercados de destino das exportações e emigração. A presente dissertação tem como objetivo o estudo do processo de internacionalização do setor bancário português centrado na seguinte questão geral de investigação: “Quais os fatores determinantes das variáveis que caraterizam a evolução do setor bancário português no exterior?” O desenvolvimento desta questão é conduzido através da construção de um modelo explicativo dos impactos de um conjunto de determinantes, selecionados a partir da revisão de literatura, sobre os indicadores que traduzem a dinâmica do negócio bancário no exterior. Neste contexto, pretendeu-se obter evidência empírica desses efeitos através de uma metodologia que consiste na estimação de modelos de dados em painel, utilizando uma amostra de seis bancos com relevância ao nível de investimento no mercado externo relativos ao período compreendido entre 2004 e 2014. Os resultados empíricos sugerem a existência de relações estatisticamente significativas entre as variáveis consideradas nos modelos. Foram encontrados indícios que associam consistentemente as variáveis emigração, Investimento Direto Estrangeiro, Produto Interno Bruto em Portugal e nos países de acolhimento, ativo bancário e inflação, com a evolução da atividade bancária no exterior. Adicionalmente, os resultados revelam que o desemprego e o rácio do crédito em relação ao ativo são estatisticamente significativos na sua influência sobre o indicador da rendibilidade dos bancos. Conclui-se que a significância dos fatores selecionados permite explicar o comportamento dos indicadores de negócio no exterior para os bancos estudados e, consequentemente, a validade do modelo de análise proposto. No entanto, não se exclui que outros elementos explicativos não ponderados no estudo tenham igualmente preponderância explicativa no processo de internacionalização do setor bancário.

Designing a vaccination strategy against dengue

In this work we propose a mathematical approach to estimate the dengue force of infection, the average age of dengue first infection, the optimum age to vaccinate children against dengue in a routine fashion and the optimum age interval to introduce the dengue vaccine in a mass vaccination campaign. The model is based on previously published models for vaccination against other childhood infections, which resulted in actual vaccination programmes in Brazil. The model was applied for three areas of distinct levels of endemicity of the city of Recife in Northeastern State of Pernambuco, Brazil. Our results point to an optimal age to introduce the dengue vaccine in the routine immunization programme at two years of age and an age interval to introduce a mass vaccination between three and 14 years of age.

A go-to-market strategy for green extration and impregnation

Dissertação para obtenção do Grau de Mestre em Biotecnologia

IPTV data reduction strategy to measure real users’ behaviours

Dissertação para obtenção do Grau de Mestre em Engenharia Informática

Análise do processo de desenvolvimento de novos produtos na indústria

No âmbito da unidade curricular Dissertação/Projeto do 2º ano do Mestrado em Engenharia mecânica – Ramo Gestão Industrial do Instituto Superior de Engenharia do Porto, o presente trabalho enquadra-se na análise do processo de desenvolvimento de novos produtos na indústria, como suporte à gestão de projetos. No seguimento da necessidade que as empresas têm cada vez mais presente em investirem na melhoria do processo de desenvolvimento de novos produtos, isso conduz a uma garantia de cumprimento de prazos e qualidade, à redução de custos, aumento de vendas, aumento de receitas, satisfação de clientes, entre outros benefícios. O trabalho foi desenvolvido, na empresa Doureca Produtos Plásticos, Lda, no Departamento de Engenharia. À medida que o projeto de melhoria avançou, foi cativante observar como os resultados obtidos contribuíam para a alteração dos paradigmas de trabalho da empresa e o impacto na melhoria continua, em função do caminho traçado da busca da máxima eficiência e eficácia. As ferramentas de melhoria são o suporte ideal, que ajudam a atingir a meta da sustentabilidade dos negócios, mas o maior obstáculo, continua a ser o fator humano. A implementação destes sistemas de melhoria requer uma maior abertura para a utilização das respetivas ferramentas, e uma mobilização dos diferentes intervenientes com vista à obtenção de resultados. Após uma avaliação da situação inicial, foram identificados pontos a melhorar na organização, de seguida foi definida a visão do que deveria ser implementado tendo em conta a estratégia da empresa, e posteriormente executado um plano de implementação das melhorias. No decurso do trabalho foram implementadas novas ferramentas de auxílio para o desenvolvimento de novos produtos como suporte à gestão de projetos. Estas ferramentas são apoiadas na filosofia LEAN, de forma a eliminar desperdícios e criar valor através da melhor utilização dos recursos.

Derivation and consistency checking of models in early software product line engineering

Dissertação para obtenção do Grau de Doutor em Engenharia Informática

Marketing plan for Snack Books

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics