Pilas de combustible de una sola camara, basadas en electrolitos de ceria dopada con gadolinia y operadas con metano y propano

La principal ventaja de las pilas de combustible de óxido sólido (SOFCs) de una sola cámara, frente a las bicamerales convencionales, es que permiten simplificar el diseño del dispositivo y operar con mezclas de hidrocarburos (metano, propano...) y aire, sin necesidad de separar ambos gases, por medio del uso de electrodos selectivos a la oxidación del combustible y reducción del oxidante. En el presente trabajo, se han fabricado monopilas soportadas sobre electrolitos de ceria dopada con gadolinia (GDC), de 200 ¿m de espesor, usando Ni-GDC como ánodo y LSC(La0.5Sr0.5CoO3-¿)-GDC-Ag2O como cátodo. Las propiedades eléctricas de la celda se determinaron en un reactor de una sola cámara, usando mezclas de metano + aire y propano + aire. Se investigó la influencia de la temperatura, de las presiones parciales del combustible y oxígeno, y de la velocidad de flujo total sobre el rendimiento de las pilas preparadas. Así, la densidad de potencia se incrementó fuertemente con el aumento de la temperatura, la velocidad de flujo total y la composición de hidrocarburo. Una vez se optimizaron los parámetros operacionales, la celda presentó unas densidades de potencia máximas de 70 y 320 mW/ cm2, operando con propano a 600ºC y con metano a 795ºC, respectivamente.

Modelling body mass index and endometrial cancer risk in a pooled-analysis of three case-control studies.

OBJECTIVE: To quantify the relation between body mass index (BMI) and endometrial cancer risk, and to describe the shape of such a relation. DESIGN: Pooled analysis of three hospital-based case-control studies. SETTING: Italy and Switzerland. POPULATION: A total of 1449 women with endometrial cancer and 3811 controls. METHODS: Multivariate odds ratios (OR) and 95% confidence intervals (95% CI) were obtained from logistic regression models. The shape of the relation was determined using a class of flexible regression models. MAIN OUTCOME MEASURE: The relation of BMI with endometrial cancer. RESULTS: Compared with women with BMI 18.5 to <25 kg/m(2) , the odds ratio was 5.73 (95% CI 4.28-7.68) for women with a BMI ≥35 kg/m(2) . The odds ratios were 1.10 (95% CI 1.09-1.12) and 1.63 (95% CI 1.52-1.75) respectively for an increment of BMI of 1 and 5 units. The relation was stronger in never-users of oral contraceptives (OR 3.35, 95% CI 2.78-4.03, for BMI ≥30 versus <25 kg/m(2) ) than in users (OR 1.22, 95% CI 0.56-2.67), and in women with diabetes (OR 8.10, 95% CI 4.10-16.01, for BMI ≥30 versus <25 kg/m(2) ) than in those without diabetes (OR 2.95, 95% CI 2.44-3.56). The relation was best fitted by a cubic model, although after the exclusion of the 5% upper and lower tails, it was best fitted by a linear model. CONCLUSIONS: The results of this study confirm a role of elevated BMI in the aetiology of endometrial cancer and suggest that the risk in obese women increases in a cubic nonlinear fashion. The relation was stronger in never-users of oral contraceptives and in women with diabetes. TWEETABLE ABSTRACT: Risk of endometrial cancer increases with elevated body weight in a cubic nonlinear fashion.

Cèl·lules mare i malalties neurodegeneratives

L"augment en l"esperança de vida va associat a un increment significatiu en la incidència de determinades malalties, entre les quals cal destacar les malalties neurodegeneratives per l"alt cost personal, social i econòmic que representen.

On the Use of a Test to Exhaustion Specific to Tennis (TEST) with Ball Hitting by Elite Players

PURPOSE: We aimed to a) introduce a new Test to Exhaustion Specific to Tennis (TEST) and compare performance (test duration) and physiological responses to those obtained during the 20-m multistage shuttle test (MSST), and b) determine to which extent those variables correlate with performance level (tennis competitive ranking) for both test procedures. METHODS: Twenty-seven junior players (8 males, 19 females) members of the national teams of the French Tennis Federation completed MSST and TEST, including elements of the game (ball hitting, intermittent activity, lateral displacement), in a randomized order. Cardiorespiratory responses were compared at submaximal (respiratory compensation point) and maximal loads between the two tests. RESULTS: At the respiratory compensation point oxygen uptake (50.1 +/- 4.7 vs. 47.5 +/- 4.3 mL.min-1.kg-1, p = 0.02), but not minute ventilation and heart rate, was higher for TEST compared to MSST. However, load increment and physiological responses at exhaustion did not differ between the two tests. Players' ranking correlated negatively with oxygen uptake measured at submaximal and maximal loads for both TEST (r = -0.41; p = 0.01 and -0.55; p = 0.004) and MSST (r = -0.38; P = 0.05 and -0.51; p = 0.1). CONCLUSION: Using TEST provides a tennis-specific assessment of aerobic fitness and may be used to prescribe aerobic exercise in a context more appropriate to the game than MSST. Results also indicate that VO2 values both at submaximal and maximal load reached during TEST and MSST are moderate predictors of players competitive ranking.

Avaluació de les emissions de gasos d’ efecte hivernacle a la ciutat de Girona i propostes de reeducació

En els últims 30 anys, la comunitat internacional ha anat agafant consciència dels efectes que pot tenir l’ increment de les emissions de gasos d’ efecte hivernacle (GEH). És per aquest motiu, entre d’ altres que es fan inventaris d’ emissions de GEH a nivell estatal i a gran escala. Aquest projecte té com a principal objectiu determinar i quantificar les emissions de GEH a escala local del municipi de Girona. Per tal de poder dur a terme aquest treball ha calgut buscar metodologies i softwares, que s’ han hagut d’ adaptar a la singularitat que té Girona, sobretot pel que fa al transport. Finalment es fan propostes que s’ adapten a la problemàtica del municipi

Impacto de las proliferaciones de medusas en la valoración económica ambiental de las playas de Denia (Sudoeste Mediterráneo), Alicante, España

El actual incremento de medusas en las costas mediterráneas, percibido como un factor negativo en la calidad de las playas, supone un factor reductor de la demanda turística en las ubicaciones costeras, sobre todo en aquellas más afectadas por éstas proliferaciones. Debido a que la época de mayor presencia de fitoplacton disponible (principal fuente de alimento de las medusas), relacionada a la alta incidencia lumínica, coincide con la temporada alta de turismo en el verano; las notificaciones de incidencias por picaduras de medusa en esta época son frecuentes. Ejemplo de ello, es el caso de Denia (Alicante, España) donde, desde 2008, se ha detectado un considerable aumento de incidencias sanitarias a causa de picaduras de medusa, paralela a la aparición de la especie invasora de cubomedusa Carybdea marsupialis (Bordehore et al, 2011). En este estudio se ha realizado una valoración económica de la playa como un bien ambiental recreativo, mediante encuestas semi-estructuradas elaboradas por Paulo Nunes (CIESM), aplicadas a una muestra inicial de 300 individuos; y evaluado cual sería el impacto social y económico en la valoración ambiental de Denia, si las proliferaciones de medusa no se estabilizaran. Se ha estimado el valor económico del impacto sicial causado por las bioinvasiones marinas en las playas recreacionistas según Nunes and Van den Bergh (2004) y Nunes and Markandya (2008); el método que también ha sido aplicado en el mismo estudio aplicado en Israel (B. Galil, J. Gowdy and P. Nunes 2012) y en Cataluña (2013, Paulo Nunes, M. Loureiro, L. Piñol, S. Sastre, L. Voltaire). En ambos casos los resultados en el impacto económico son considerables pero menores a los esperados, al igual que en los resultados obtenidos en Denia (Alicante).

Voltametria de onda quadrada. Primeira parte: aspectos teóricos

The theoretical aspects of square wave voltammetry were discussed. Reversible, irreversible and quase-reversible electrode reactions were analyzed and the correlations between parameters like frequency, period, square wave potential and amplitude were showed. In this way, diagnostic relationships allow to characterize the electrode process. The analytical applications were discussed in base of the increment in the analytical response (current) due to the characteristics of the developed equations and the unique mode of collecting the electrode response, i.e., the direct and reverse signals. Finally, recent advances in the basic theory, as the applications to the hydrodynamic electrode and the ultramicroelectrode were also analyzed, and the multiple pulses square wave voltammetry was also introduced.

Dimensão fractal de ácidos húmicos em diferentes condições experimentais

The determination of fractal dimension (D) of humic particles was achieved by the turbidimetric technique where diluted suspensions of humic acids, in different experimental conditions, were analyzed by spectrophotometry UV-Vis. The slope of the lines (beta) was taken from the graphics (logtauvs loglambda) to obtain D. The results show that the values of D changed according to pH (3.0, 5.0 and 7.0), temperature (25 and 5 ºC) and shaking (magnetic and horizontal). In general, the value of D decreased with the increment of pH, increase of shaking and decrease of temperature.

Estudo eletroanalítico do herbicida paraquat em soluções aquosas por voltametria de onda quadrada utilizando ultramicroeletrodos

The electrochemical behavior of paraquat on Pt, Au and carbon fiber ultramicroelectrodes were studied in laboratory samples by square wave voltammetry at high frequencies. The results showed two reversible peaks for paraquat reduction, in agreement to the literature data. The first peak was associated to the reduction of paraquat molecule in solution, with the further adsorption of the intermediate on the electrode surface. This adsorbed species undergoes to electroreduction in a reaction associated to the second voltammetric peak. The variation in pH and square wave parameters showed the best conditions to reduce paraquat as pH 5.0, frequency as high as 1000 s-1, scan increment of 2 mV and square wave amplitude of 50 mV. At such conditions, a variation of paraquat concentrations from 4.3 x 10-6 to 1.66 x 10-4 mol L-1 presented values for the detection limit equal to 3.9, 6.2 and 20.3 ppb on Pt, Au and carbon, respectively, at 1000 s-1. These values are quite below17 the allowed limit of paraquat in drinking water.

Innovació oberta per sortir de la crisi econòmica

L'increment del nombre de llocs de treball no pot estar només associat a fer-ne aparèixer de nous basant-nos en les noves empreses derivades dels resultats de la recerca. Crear petites empreses basades en productes de les TIC o de disseny de molècules, per citar-ne dos jaciments típics, està molt bé, però des de qualsevol punt de vista, no permetria una disminució substancial del nombre de desocupats. Amb prou feines servirien per donar sortida als joves que surten d'escoles i universitats, més ben formats que una gran proporció dels desocupats

La competitivitat també requereix talent

L'informe Innovation Union Competitiveness Report 2011 indica que l'Estat espanyol està en condicions d'arribar al 3% de despesa en R+D respecte al PIB, objectiu fixat per la Unió Europea per al 2020, però per fer-ho caldria un increment notable de la mitjana de la despesa anual respecte als anys anteriors, especialment en l'àmbit empresarial. Un dels grans dèficits de l'economia espanyola rau en la gran distància entre la inversió empresarial en R+D espanyola i l'europea. La tendència actual fa pensar que Espanya, sense un fort impuls, es quedarà en un 2,2% o per sota a causa de la crisi econòmica.

Proyecto Vive la vida : Propuesta de intervención basada en un programa de psicología positiva y motivacional para mejorar la autoestima y disminuir el aislamiento social en mayores jubilados

La jubilación y la vejez implican la necesidad de una reorganización de los roles sociales, personales y familiares, y una adaptación al nuevo estatus social. Es una etapa crítica en la que puede aparecer un deterioro de la autoestima y el incremento del aislamiento social. Por ello, los objetivos de la presente intervención son incrementar la autoestima y disminuir el aislamiento social en el mayor jubilado.

La promoció de vendes de les marques d'aigües minerals en la distribució organitzada: el cas de Mercadona

La popularització de productes naturals i d’hàbits de vida saludables, ha contribuït a estimular la demanda de tota mena de d’articles vinculats a la salut com l’aigua mineral natural, que els últims anys, ha passat de ser una “commodity" a un producte de valor afegit. La conjuntura social i econòmica dels últims anys, també ha condicionat els hàbits de consum de les famílies. En alguns casos, la reducció del poder adquisitiu ha motivat l’estalvi en tota mena de productes i serveis fet que ha beneficiat les marques privades o de distribuïdor, sovint considerades inferiors en qualitat però també en preu, i que d’ara en endavant anomenarem (MDD). Els distribuïdors han recolzat els productes MDD millorant-ne la qualitat, la presentació i han invertit en estratègies de comunicació, fet que, ha suposat un increment de la quota de mercat en totes les categories de bens de consum favorable a les MDD. El present treball, pretén dur a terme un anàlisi comparatiu dels preus de venda al públic de les aigües minerals naturals a la cadena Mercadona, i de les estratègies promocionals seguides per tal d’afavorir la MDD vers les marques de fabricant (MDF).

Óxido nítrico: propriedades e potenciais usos terapêuticos

Nitric oxide (•NO) is a substance that acts as a second-messenger and is associated with a number of important physiological functions such as regulation of the vascular tonus, immune modulation and neurotransmission. As a physiological mediator, alteration of its concentration level may cause pathophysiological disfunctions such as hypertension, septic shock and impotence. Possible therapeutic approaches are being developed to control NO levels in vivo. We review herein the main physical and chemical properties of •NO, its biological functions and available chemical interventions to reduce and increment its physiological concentration levels. Recent developments in the field are also highlighted.

A Practical Micro Mechanical Model Based Local Approach Methodology for the Analysis of Ductile Fracture of Welded T-Joints

This thesis concentrates on developing a practical local approach methodology based on micro mechanical models for the analysis of ductile fracture of welded joints. Two major problems involved in the local approach, namely the dilational constitutive relation reflecting the softening behaviour of material, and the failure criterion associated with the constitutive equation, have been studied in detail. Firstly, considerable efforts were made on the numerical integration and computer implementation for the non trivial dilational Gurson Tvergaard model. Considering the weaknesses of the widely used Euler forward integration algorithms, a family of generalized mid point algorithms is proposed for the Gurson Tvergaard model. Correspondingly, based on the decomposition of stresses into hydrostatic and deviatoric parts, an explicit seven parameter expression for the consistent tangent moduli of the algorithms is presented. This explicit formula avoids any matrix inversion during numerical iteration and thus greatly facilitates the computer implementation of the algorithms and increase the efficiency of the code. The accuracy of the proposed algorithms and other conventional algorithms has been assessed in a systematic manner in order to highlight the best algorithm for this study. The accurate and efficient performance of present finite element implementation of the proposed algorithms has been demonstrated by various numerical examples. It has been found that the true mid point algorithm (a = 0.5) is the most accurate one when the deviatoric strain increment is radial to the yield surface and it is very important to use the consistent tangent moduli in the Newton iteration procedure. Secondly, an assessment of the consistency of current local failure criteria for ductile fracture, the critical void growth criterion, the constant critical void volume fraction criterion and Thomason's plastic limit load failure criterion, has been made. Significant differences in the predictions of ductility by the three criteria were found. By assuming the void grows spherically and using the void volume fraction from the Gurson Tvergaard model to calculate the current void matrix geometry, Thomason's failure criterion has been modified and a new failure criterion for the Gurson Tvergaard model is presented. Comparison with Koplik and Needleman's finite element results shows that the new failure criterion is fairly accurate indeed. A novel feature of the new failure criterion is that a mechanism for void coalescence is incorporated into the constitutive model. Hence the material failure is a natural result of the development of macroscopic plastic flow and the microscopic internal necking mechanism. By the new failure criterion, the critical void volume fraction is not a material constant and the initial void volume fraction and/or void nucleation parameters essentially control the material failure. This feature is very desirable and makes the numerical calibration of void nucleation parameters(s) possible and physically sound. Thirdly, a local approach methodology based on the above two major contributions has been built up in ABAQUS via the user material subroutine UMAT and applied to welded T joints. By using the void nucleation parameters calibrated from simple smooth and notched specimens, it was found that the fracture behaviour of the welded T joints can be well predicted using present methodology. This application has shown how the damage parameters of both base material and heat affected zone (HAZ) material can be obtained in a step by step manner and how useful and capable the local approach methodology is in the analysis of fracture behaviour and crack development as well as structural integrity assessment of practical problems where non homogeneous materials are involved. Finally, a procedure for the possible engineering application of the present methodology is suggested and discussed.