Punching Shear Behavior of UHPC Flat Slabs

At the Institute of Structural Engineering of the Faculty of Civil Engineering, Kassel University, series tests of slab-column connection were carried out, subjected to concentrated punching load. The effects of steel fiber content, concrete compressive strength, tension reinforcement ratio, size effect, and yield stress of tension reinforcement were studied by testing a total of six UHPC slabs and one normal strength concrete slab. Based on experimental results; all the tested slabs failed in punching shear as a type of failure, except the UHPC slab without steel fiber which failed due to splitting of concrete cover. The post ultimate load-deformation behavior of UHPC slabs subjected to punching load shows harmonic behavior of three stages; first, drop of load-deflection curve after reaching maximum load, second, resistance of both steel fibers and tension reinforcement, and third, pure tension reinforcement resistance. The first shear crack of UHPC slabs starts to open at a load higher than that of normal strength concrete slabs. Typically, the diameter of the punching cone for UHPC slabs on the tension surface is larger than that of NSC slabs and the location of critical shear crack is far away from the face of the column. The angle of punching cone for NSC slabs is larger than that of UHPC slabs. For UHPC slabs, the critical perimeter is proposed and located at 2.5d from the face of the column. The final shape of the punching cone is completed after the tension reinforcement starts to yield and the column stub starts to penetrate through the slab. A numerical model using Finite Element Analysis (FEA) for UHPC slabs is presented. Also some variables effect on punching shear is demonstrated by a parametric study. A design equation for UHPC slabs under punching load is presented and shown to be applicable for a wide range of parametric variations; in the ranges between 40 mm to 300 mm in slab thickness, 0.1 % to 2.9 % in tension reinforcement ratio, 150 MPa to 250 MPa in compressive strength of concrete and 0.1 % to 2 % steel fiber content. The proposed design equation of UHPC slabs is modified to include HSC and NSC slabs without steel fiber, and it is checked with the test results from earlier researches.

Schauder – Zur Dekonstruktion eines Spürens

Zusammenfassung: Ziel der Arbeit ist den Sinn von Schauder philosophisch zu erhellen. An einem Einzelphänomen, wie es so bisher nicht behandelt wurde, wird zugleich das Geflecht von Affekt/Emotion/Gefühl, gestützt auf Hegel, Heidegger, Husserl, Freud und Lacan, in immer neuen Ansätzen kritisch reflektiert und Zug um Zug mit Derrida dekonstruiert. In einem Textverfahren, das sich auch grafisch durch gegenübergestellte Kolumnen auszeichnet, werden heterogene Ansätze zum Sinn von Schauder mit dekonstruktivistischen Einsichten konfrontiert. Die Ansätze, Schauder über Datum, Begriff, Phänomen oder Strukturelement bestimmen zu wollen, durchdringen sich dabei mit denjenigen, die sich einer solchen Bestimmung entziehen (Hegels Negativität, Heideggers Seinsentzug oder Lacans Signifikantenmangel). Am Fokus Schauder, an dem sich das Fiktive einer mit sich selbst identischen Präsenz besonders eindringlich darstellt, werden so spezifische Aporien der Metaphysik der Präsenz entfaltet und die Geschlossenheit logozentristischer Systeme in die Bewegung einer anderen Öffnung und Schließung im Sinn der Schrift bzw. des allgemeinen Textes transformiert. Neben der différance, dem Entzug der Metapher, dem Supplement und dem Gespenstischen stützt sich die Arbeit auf die Iterabilität, bei der im selben Zug die Identität des Sinns gestiftet und zerstreut wird (Dissemination). Im Kapitel Piloerection werden Ambivalenzen und Paradoxien des Schauders am Beispiel von computergestützten empirisch-psychologischen Studien aufgezeigt. Im Kapitel Atopologie des Schauders prädikative, propositionale und topologische Bedingungen zum Sinn von Schauder analysiert und dekonstruiert. Ebenso, im Folgekapitel Etymon, etymologische und technisch-mediale Bedingungen. Im Schlußkapitel Maß, Anmaß, Unmaß der Empfindung des Schauders wird am Beispiel der konkreten Beiträge zum Schauder von Aristoteles, Kant, Fechner, Otto, Klages, Lorenz und Adorno aufgezeigt, dass (1) ein Schauder nicht von einem Außen aus an-gemessen werden kann, (2) sich im Schauder die metaphysische Opposition von Fiktion und Realität in einer Unentscheidbarkeit zerstreut, (3) dass trotz der Heterogenität der Ansätze in diesen Beiträgen eine Komplizenschaft zum Ausdruck kommt: ein Begehren nach Präsenz, das durch den Ausschluß des Anderen zugleich die Gewalt des Einen produziert, (4) dass der Signifikant Schauder, der selbst in Abwesenheit eines Referenten, eines bestimmten Signifikats, einer aktuellen Bedeutungs­intention, eines Sen­ders oder Empfängers funktioniert, als verändertes Zu­rückbleiben eines differenzieller Zeichens betrachtet werden muss, als Effekt von Spuren, die sich nur in ihrem eige­nen Auslöschen ereignen. Die Arbeit schließt mit dem Vorschlag, Spüren jenseits von Arché, Telos oder Eschaton, jenseits eines Phallogozentrismus in der derridaschen Spur zu denken. Nicht zuletzt über diese Pfropfung, wie sie im Französischen [trace] so nicht möglich ist, schließt sie als deutschsprachiger Beitrag an sein Werk an.

New Architectural Models for Visibly Controllable Computing: The Relevance of Dynamic Object Oriented Architectures and Plan Based Computing Models

Traditionally, we've focussed on the question of how to make a system easy to code the first time, or perhaps on how to ease the system's continued evolution. But if we look at life cycle costs, then we must conclude that the important question is how to make a system easy to operate. To do this we need to make it easy for the operators to see what's going on and to then manipulate the system so that it does what it is supposed to. This is a radically different criterion for success. What makes a computer system visible and controllable? This is a difficult question, but it's clear that today's modern operating systems with nearly 50 million source lines of code are neither. Strikingly, the MIT Lisp Machine and its commercial successors provided almost the same functionality as today's mainstream sytsems, but with only 1 Million lines of code. This paper is a retrospective examination of the features of the Lisp Machine hardware and software system. Our key claim is that by building the Object Abstraction into the lowest tiers of the system, great synergy and clarity were obtained. It is our hope that this is a lesson that can impact tomorrow's designs. We also speculate on how the spirit of the Lisp Machine could be extended to include a comprehensive access control model and how new layers of abstraction could further enrich this model.

La incidencia de la violencia religiosa en las relaciones internacionales : conflicto israelí -palestino 1994-1995

La presente monografía de grado relaciona la teoría Constructivista Rule-Oriented y el Triangulo de Violencia de Johan Galtung (violencia estructural, violencia cultural y violencia directa) a la luz del conflicto entre Israelíes y Palestinos. Se busca resaltar aquellos actos de violencia comprendidos entre 1994-1995: la masacre de Baruck Golstein, el asesinato de Isaac Rabin y los atentados suicidas cometidos por Palestinos, miembros de Hamas. Actos que merecen ser recordados, estudiados y analizados para que seamos conscientes del peligro que pueden generar los discursos religiosos extremistas como vehículos de violencia. Este estudio se focaliza en los grupos Hamas, Gush Emunim y Kach; quienes desde su fundación se encargaron de fomentar una violencia cultural entre ambos pueblos. Finalmente los invito a reflexionar sobre este conflicto de tan larga duración y con gran contenido de violencia.

Interacting software-agents to support a kind of expert supervision systems

Expert supervision systems are software applications specially designed to automate process monitoring. The goal is to reduce the dependency on human operators to assure the correct operation of a process including faulty situations. Construction of this kind of application involves an important task of design and development in order to represent and to manipulate process data and behaviour at different degrees of abstraction for interfacing with data acquisition systems connected to the process. This is an open problem that becomes more complex with the number of variables, parameters and relations to account for the complexity of the process. Multiple specialised modules tuned to solve simpler tasks that operate under a co-ordination provide a solution. A modular architecture based on concepts of software agents, taking advantage of the integration of diverse knowledge-based techniques, is proposed for this purpose. The components (software agents, communication mechanisms and perception/action mechanisms) are based on ICa (Intelligent Control architecture), software middleware supporting the build-up of applications with software agent features

La pizarra mágica : marcas olvidadas del conflicto

La pizarra mágica es un juego típico para niños, en el que se puede dibujar y borrar todo. Sin embargo, cada trazo deja una marca, por invisible que parezca. Quién podría imaginar que un juguete como este tiene mucho en común con la historia de tres mujeres desplazadas por la violencia en Colombia: Minellys, María y Yanid. Este documental muestra los diferentes tipos de traumas producidos por el desplazamiento y la forma en que el Estado trabaja para mitigar esas marcas con las que conviven más de 5 millones de colombiano. Esas son las marcas olvidadas del conflicto que si no se atienden, seguirán produciendo consecuencias nefastas en las personas, la sociedad, la cultura y la historia colombiana.

Abstraction: From Transistors to Computers and from Bits to Programs

Takes the Tanenbaum (Structured Computer Organisation) approach to show how application of successive levels of abstraction allow us to understand how computers are made from transitors and how they are programmed.

De aquí a mañana: expectativas a futuro en jóvenes de la Comuna IV de Soacha

Los jóvenes que afrontan un aislamiento social tienen expectativas de movilidad social como cualquier otro sector o clase social, basadas en la educación como vehículo principal para salir de la pobreza. Pese a ello, la valoración de la educación se produce en un nivel discursivo, ya que factores como la violencia barrial, el embarazo adolescente y la necesidad de generar ingresos, entre otros, compiten y a menudo ganan a las expectativas educativas de esos jóvenes.

Señor presidente no creo en vos; señor policía no temo de voz. Represión estatal y paramilitar y prácticas juveniles en los barrios Alameda, Brisas, Anita y Almendros

El estudio sobre la juventud y su relación con prácticas realizadas en los espacios públicos, especialmente la calle, ha tenido un renovado interés durante las últimas décadas. Estos debates se han vuelto relevantes en cuanto que los jóvenes parecen ocupar un lugar primordial en las escenas cotidianas de violencia, en particular los jóvenes de sectores populares. A través de un proceso etnográfico de carácter sistemático y sostenido en el tiempo identifico y explico las distintas interacciones de los jóvenes en los espacios públicos de cuatro barrios populares, centrando el análisis en las distintas formas de negociación con los actores armados, especialmente con la policía y el paramilitarismo. Lo que argumento es que hacer presencia en los espacios públicos, especialmente en la calle, termina por constituir en una opción de vida a través de los cuales fomentan una beligerancia social y política de resistencia pero ante todo como método que les permite proponer alternativas de existencia, por demás no violentas, frente a la violencia generalizada de la policía y el paramilitarismo. El problema radica en que muchas de las expresiones de algunos jóvenes terminan por reproducir los mecanismos de violencia del que son víctimas, aspecto que es identificado, por quienes acuden a la violencia, como una forma de reclamar un lugar en la comunidad, a permitirse ser reconocidos y escuchados y a sobrevivir en medio de una simultaneidad de violencias que cotidianamente los atropella y les vulnera los derechos. La violencia de estos jóvenes es una forma de no permitir que las esperanzas se diluyan, aunque paradójicamente también les puede quitar la vida

Modelling, control and supervision for a class of hybrid systems

The aim of this thesis is to narrow the gap between two different control techniques: the continuous control and the discrete event control techniques DES. This gap can be reduced by the study of Hybrid systems, and by interpreting as Hybrid systems the majority of large-scale systems. In particular, when looking deeply into a process, it is often possible to identify interaction between discrete and continuous signals. Hybrid systems are systems that have both continuous, and discrete signals. Continuous signals are generally supposed continuous and differentiable in time, since discrete signals are neither continuous nor differentiable in time due to their abrupt changes in time. Continuous signals often represent the measure of natural physical magnitudes such as temperature, pressure etc. The discrete signals are normally artificial signals, operated by human artefacts as current, voltage, light etc. Typical processes modelled as Hybrid systems are production systems, chemical process, or continuos production when time and continuous measures interacts with the transport, and stock inventory system. Complex systems as manufacturing lines are hybrid in a global sense. They can be decomposed into several subsystems, and their links. Another motivation for the study of Hybrid systems is the tools developed by other research domains. These tools benefit from the use of temporal logic for the analysis of several properties of Hybrid systems model, and use it to design systems and controllers, which satisfies physical or imposed restrictions. This thesis is focused in particular types of systems with discrete and continuous signals in interaction. That can be modelled hard non-linealities, such as hysteresis, jumps in the state, limit cycles, etc. and their possible non-deterministic future behaviour expressed by an interpretable model description. The Hybrid systems treated in this work are systems with several discrete states, always less than thirty states (it can arrive to NP hard problem), and continuous dynamics evolving with expression: with Ki ¡ Rn constant vectors or matrices for X components vector. In several states the continuous evolution can be several of them Ki = 0. In this formulation, the mathematics can express Time invariant linear system. By the use of this expression for a local part, the combination of several local linear models is possible to represent non-linear systems. And with the interaction with discrete events of the system the model can compose non-linear Hybrid systems. Especially multistage processes with high continuous dynamics are well represented by the proposed methodology. Sate vectors with more than two components, as third order models or higher is well approximated by the proposed approximation. Flexible belt transmission, chemical reactions with initial start-up and mobile robots with important friction are several physical systems, which profits from the benefits of proposed methodology (accuracy). The motivation of this thesis is to obtain a solution that can control and drive the Hybrid systems from the origin or starting point to the goal. How to obtain this solution, and which is the best solution in terms of one cost function subject to the physical restrictions and control actions is analysed. Hybrid systems that have several possible states, different ways to drive the system to the goal and different continuous control signals are problems that motivate this research. The requirements of the system on which we work is: a model that can represent the behaviour of the non-linear systems, and that possibilities the prediction of possible future behaviour for the model, in order to apply an supervisor which decides the optimal and secure action to drive the system toward the goal. Specific problems can be determined by the use of this kind of hybrid models are: - The unity of order. - Control the system along a reachable path. - Control the system in a safe path. - Optimise the cost function. - Modularity of control The proposed model solves the specified problems in the switching models problem, the initial condition calculus and the unity of the order models. Continuous and discrete phenomena are represented in Linear hybrid models, defined with defined eighth-tuple parameters to model different types of hybrid phenomena. Applying a transformation over the state vector : for LTI system we obtain from a two-dimensional SS a single parameter, alpha, which still maintains the dynamical information. Combining this parameter with the system output, a complete description of the system is obtained in a form of a graph in polar representation. Using Tagaki-Sugeno type III is a fuzzy model which include linear time invariant LTI models for each local model, the fuzzyfication of different LTI local model gives as a result a non-linear time invariant model. In our case the output and the alpha measure govern the membership function. Hybrid systems control is a huge task, the processes need to be guided from the Starting point to the desired End point, passing a through of different specific states and points in the trajectory. The system can be structured in different levels of abstraction and the control in three layers for the Hybrid systems from planning the process to produce the actions, these are the planning, the process and control layer. In this case the algorithms will be applied to robotics ¡V a domain where improvements are well accepted ¡V it is expected to find a simple repetitive processes for which the extra effort in complexity can be compensated by some cost reductions. It may be also interesting to implement some control optimisation to processes such as fuel injection, DC-DC converters etc. In order to apply the RW theory of discrete event systems on a Hybrid system, we must abstract the continuous signals and to project the events generated for these signals, to obtain new sets of observable and controllable events. Ramadge & Wonham¡¦s theory along with the TCT software give a Controllable Sublanguage of the legal language generated for a Discrete Event System (DES). Continuous abstraction transforms predicates over continuous variables into controllable or uncontrollable events, and modifies the set of uncontrollable, controllable observable and unobservable events. Continuous signals produce into the system virtual events, when this crosses the bound limits. If this event is deterministic, they can be projected. It is necessary to determine the controllability of this event, in order to assign this to the corresponding set, , controllable, uncontrollable, observable and unobservable set of events. Find optimal trajectories in order to minimise some cost function is the goal of the modelling procedure. Mathematical model for the system allows the user to apply mathematical techniques over this expression. These possibilities are, to minimise a specific cost function, to obtain optimal controllers and to approximate a specific trajectory. The combination of the Dynamic Programming with Bellman Principle of optimality, give us the procedure to solve the minimum time trajectory for Hybrid systems. The problem is greater when there exists interaction between adjacent states. In Hybrid systems the problem is to determine the partial set points to be applied at the local models. Optimal controller can be implemented in each local model in order to assure the minimisation of the local costs. The solution of this problem needs to give us the trajectory to follow the system. Trajectory marked by a set of set points to force the system to passing over them. Several ways are possible to drive the system from the Starting point Xi to the End point Xf. Different ways are interesting in: dynamic sense, minimum states, approximation at set points, etc. These ways need to be safe and viable and RchW. And only one of them must to be applied, normally the best, which minimises the proposed cost function. A Reachable Way, this means the controllable way and safe, will be evaluated in order to obtain which one minimises the cost function. Contribution of this work is a complete framework to work with the majority Hybrid systems, the procedures to model, control and supervise are defined and explained and its use is demonstrated. Also explained is the procedure to model the systems to be analysed for automatic verification. Great improvements were obtained by using this methodology in comparison to using other piecewise linear approximations. It is demonstrated in particular cases this methodology can provide best approximation. The most important contribution of this work, is the Alpha approximation for non-linear systems with high dynamics While this kind of process is not typical, but in this case the Alpha approximation is the best linear approximation to use, and give a compact representation.

La escritura de la historia en Ecuador tiene cuerpo de mujer: a propósito de Baldomera de Alfredo Pareja Diezcanseco (Del Fabulador)

"El lenguaje despojado del realismo le sirve al autor, un sobreviviente al igual que su personaje, para pensar una representación de los hechos cuando los gusanos hayan destruído la materialidad de los cuerpos y sus testimonios." En Baldomera, los referentes locales adquieren universalidad en las cuestiones de género: la historia de esta heroína fracasada puede ser leída como la del país, inscrita en el cuerpo de una mujer pobre, fea y negra, que termina sus días en una cárcel. Aunque es fuerte y resiste (sobrevive sin armas la matanza de noviembre de 1922), en los enfrentamientos con la ley -con la violencia racional de sus armas-, ella pierde, esto agrega un elemento más a las tensiones entre la pequeñez y lo grande, presentes en toda la novela. Un poco como el mismo autor, sobreviviente del Grupo de Guayaquil, cuando testifica sobre el trabajo literario de los Cinco como un Puño, intelectuales modernos con voz crítica ante las realidades sociales y las contradicciones de los años treinta.

El viaje a Camelot de Bartolomé de las Casas (Estudios)

La autora lee la Brevísima, de Bartolomé de las Casas, en el contexto del auge del imaginario caballeresco en el siglo XVI español, propiciado por las empresas de la Conquista y la Colonia, y que alcanzó igualmente a las gestas religiosas. Estudia este reflejo caballeresco –ensombrecido tal vez por el dramatismo y la violencia de lo narrado, entre otras razones–, empezando por la promesa lascasiana de ennoblecer a campesinos pacíficos a cambio de que colonizaran con justicia, resalta el carácter cortés y pacífico de los indios, así como de sus valores de tinte caballeresco («lo mismo los varones que las mujeres, muertas antes que entregar su honra o faltar a sus esposos», destaca su respeto a la jerarquía, natural o adquirida, y a las responsabilidades de cada cual, incluidas las del buen rey, que protege a sus vasallos y defiende los límites de su territorio), incluso distingue su delicadeza corporal como signo de nobleza. El patrón narrativo de la Brevísima es similar al de muchas obras de la tradición caballeresca. Utiliza todos estos elementos en un retrato civilizado de los indios, presentados viviendo en sociedad y según las virtudes cristianas antes de la llegada de los españoles, en un equilibrio que sería amenazado por los afanes desmedidos de los conquistadores.

La seguridad en las relaciones Ecuador-Colombia (Tema Central)

El artículo se ocupa del tema de política exterior ecuatoriana más urgente y sobresaliente en la actualidad, esto es la existencia de un conflicto violento transfronterizo. El autor examina críticamente los supuestos éticos y conceptuales de la actual política exterior ecuatoriana desde la perspectiva de los estudios de paz. Se argumenta que el conflicto colombiano puede ser entendido como una guerra contemporánea en la cual el Estado ecuatoriano estaría implicado por el imperativo ético de proteger la seguridad humana de los ecuatorianos, y de las poblaciones colombianas forzadas a desplazarse.

David Ledesma Vázquez: la conciencia de ser abyecto (Crítica)

Este ensayo examina la obra poética del ecuatoriano David Ledesma Vázquez desde algunos conceptos teóricos propuestos por Kristeva y Butler, que permiten entender cómo se va consolidando una conciencia de ser abyecto ante el otro, y cómo desde ahí, y a partir de un muy cuidado manejo de la palabra poética y de ciertos recursos tipográficos, se construye un universo amatorio que se opone al aparato heteronormativo y se enfoca en los afectos. También se destaca, en esta misma línea de resistencia, cómo en la poesía de Ledesma Vázquez se erige un cuestionamiento a la violencia uniformadora de la vida moderna y al impulso teleológico del capitalismo, en particular, al contraponer la hostilidad de la ciudad real –dibujada en varios textos– con la armonía de Sodoma.

Post-(sustainable)-development?

This paper critically reviews the application of a post-development analysis to sustainable development by employing a defined target for post-development analysis – the Environmental Kuznets Curve (EKC). Data from the 2005 Environmental Sustainability Index (ESI) for 146 countries are used to generate statistically significant EKC models, and the approach is deconstructed by employing post-development theory. While an ESI derived EKC is an easy target for post-development critique, there are foundations upon which both rest, and are not easily dismissed. Neither is the typical post-development 'alternative' of encouraging 'endogenous discourse' and grassroots movements at odds with sustainable development. As a result, this paper argues that sustainable development theory already incorporates much of the critique and alternatives raised by post-developmentalists. Indeed, what is more disconcerting is that sustainable development readily encompasses such apparently divergent ideas represented by the ESI, EKC and post-developmental critique and solutions.