A elasticidade do ligamento colateral medial da articulação do cotovelo de cão não advém de elastina

A literatura relata que ligamentos consistem de tecido conjuntivo denso, composto por água, colágeno tipos I e III, diversas proteoglicanas, pouca elastina e várias outras substâncias. Além disso, os ligamentos, quando testados in vitro com tensão longitudinal e unidirecional, apresentam um comportamento mecânico não-linear, ou seja, as fibras colágenas são alongadas aos poucos, perdendo seu padrão ondulado, até que todas estejam no limite máximo de tração e iniciem o rompimento. Portanto, no presente estudo avaliou-se a presença de fibras elásticas (elastina) no ligamento colateral medial do cotovelo de cães adultos para ponderar se a elasticidade do referido ligamento deve-se à presença de fibras elásticas ou às propriedades elásticas do colágeno ou à combinação de ambas. Foram utilizadas quatro articulações, de machos e fêmeas em igual proporção, das quais foram adquiridas as amostras das porções médias dos ligamentos colaterais mediais para a rotina histológica. Os cortes foram corados pela técnica de Weigert, e não foi observada a presença de fibras elásticas, detectável por esta técnica à microscopia de luz. Concluiu-se que a elasticidade do ligamento colateral medial do cotovelo de cão deve-se, principalmente, ao padrão ondulado das fibras colágenas, devido à quantidade ínfima ou até à inexistência de fibras elásticas nesta estrutura.

Características anatômicas e morfométricas do ligamento oblíquo do cotovelo de eqüinos

Neste trabalho, algumas características anatômicas e morfométricas do ligamento oblíquo do cotovelo do eqüino foram descritas em dez animais adultos, sem raça definida, que não apresentavam afecções dos órgãos locomotores. O ligamento oblíquo origina-se dorsal à fossa radial do úmero, atravessa obliquamente a superfície cranial do cotovelo e se divide em uma porção longa, que se insere na tuberosidade radial, e em outra curta, que se une à porção longa do ligamento colateral medial. Foram efetuadas medidas visando a obter o comprimento e a largura máximas entre a origem e a inserção do ligamento oblíquo, não sendo observadas diferenças (P>0,05) nas comparações feitas entre os sexos e os antímeros. O ligamento oblíquo contribui no efeito mola e na manutenção da estabilidade da articulação do cotovelo do eqüino. Pela particularidade de sua localização, cranial à articulação, o ligamento oblíquo possui ação frenadora, impedindo a extensão completa da referida articulação.

Oportunidades de melhoria ergonômica das exigências físicas da atividade jangadeira em Ponta Negra Natal-RN

The fishing is an activity with rafts marked by unpredictability, poor tools, physical stress, awkward postures, risk of accidents and incidents, which contribute to insecurity in the context of activity. This study aimed to contribute to reducing of physical effort and the biomechanical impacts in jangadeiro activity of artisanal fishing using jangadas on the beach of Ponta Negra, Natal-RN. To achieve this purpose the methodology of the Work Ergonomic Analysis - WEA became a reference using techniques such as observational and interactional observation notes, photographs, videos, action conversational and listening verbalizations. The resulting activity in health jangadeiro, discussed in this research were: static postural assessment, flexibility of movement of shoulder flexion-extension, flexibility of the hamstrings and lower back, grip and musculoskeletal pain. It was found from observations, interactions and activity analysis, that in carrying out fishing rafts are frequent awkward postures associated with demand for power and many are already feeling the jangadeiros reflections of years of life dedicated to this work. These have already adopted some measures to manage the activity, such as job rotation during the expedition of capture. Therefore, there is a need to expand these measures of activity management, as well as design and capabilities of the raft, seeking positive changes in the activity and consequently the quality of life jangadeiro

Fibras de licuri: um reforço vegetal alternativo de compósitos poliméricos

This research is based, at first, on the seeking of alternatives naturals reinforced in place of polymeric composites, also named reinforced plastics. Therein, this work starts with a whole licuri fiber micro structural characterization, as alternative proposal to polymeric composites. Licuri fiber is abundant on the Bahia state flora, native from a palm tree called Syagrus Coronata (Martius) Beccari. After, it was done only licuri fiber laminar composite developing studies, in order to know its behavior when impregnated with thermofix resin. The composite was developed in laminar structure shape (plate with a single layer of reinforcement) and produced industrially. The layer of reinforcement is a fabric-fiber unidirectional of licuri up in a manual loom. Their structure was made of polyester resin ortofitálica (unsaturated) only reinforced with licuri fibers. Fiber characterization studies were based on physical chemistry properties and their constitution. It was made by tension, scanning electron microscopy (SEM), x-ray diffraction (RDX) and thermal analyses (TG and DTA) tests, besides fiber chemistry analyses. Relating their mechanical properties of strength and hardness testing, they were determined through unit axial tension test and flexion in three points. A study in order to know fiber/matrix interface effects, in the final composites results, was required. To better understand the mechanical behavior of the composite, macroscopic and microscopic optical analysis of the fracture was performed

Efeito da introdução de resíduo de cinza de forno cerâmico em massa para cerâmica estrutural

The red ceramics and structural ceramics, as they are known, include ceramic materials made by blocks of seals and structures, bricks, tiles, smail flagstones manacles, rustic floors and ornamental materials. Their fabrication uses raw material such as clay and clay sites, with some content of impurity. It has good durability and mechanical strength to compression, low cost, making it one of the mainly used materials in civil engineering. The incorporation of many industrial activities residue to ceramic products is a technological alternative for reducing the environmental impact caused by its carefree disposal. This incorporation can promote chemical change and inertness of metals from residue, by fixation in the glassy phase of ceramic during the burning stage. The main aim of this project is to study the technical feasibility of the addition of ceramic oven ash into formulations of mass for structural ceramics. In this project two kinds of clay (plastic and non-plastic) were used, as well as the ash from firewood used in the process of burning of structural ceramics. A group of experiments was outlined, which permitted the evaluation of the influence of the burning cycle in different temperatures of the ash content in formulations for ceramic blocks through technological properties, mechanical behavior and microstructure. Five samples were processed of each one of the masses of plastic and non-plastic clay without addition of ash and with addition of ash on the percentages of 10 % and 20 %, for temperatures of 850 °C, 950 °C, 1050 °C and 1150 °C, obtained through sinterization process. Among the studied compositions, the one which presented best performance was the mass of clay with 10 % of ash, at temperature of 1150 °C, with the smallest absorption of water, the smallest apparent porosity, specific apparent mass a bit over the others and greatest mechanical resistance to flexion. The composition made confirmed the technical feasibility of the use of ash in the mass for structural ceramics with maintenance of its necessary characteristics for its purposes

Fabricação de malha de trama utilizada como pré-formas na indústria de compósitos e avaliação das propriedades mecânicas

In the manufacture of composite, textile materials are being used as reinforcement. Generally, the combination of the matrix with the textile material in the form of fibres or yarns is used depending on their distribution in the web. In the present work, in place of fibres or yarns, a knitted structure in the form of the final product which is defined as preform. The preform is weft knit manufactured with polyester filaments. In the manufacture of composite, polyester resin was used as matrix. The physical and mechanical properties as well as the formability of the weft knit were analysed. The physical and mechanical properties as well as the formability of the knitted structure were analysed. The results obtained on the analysis show that the courses and wales of the weft knit structure and the tensile properties help the formability of the structure and the impregnation of the resin. It could be clearly observed that composite structure in the direction of the courses support more tension than in the direction of the wales. In relation to the three points flexural tests it was possible to note that there was more flexion in the direction of wales, what was expected. It was also possible to note that there are other advantages such as reduction in the loss of materials used, homogeneity in the distribution of the knitted structure in the mould, reduction in the preparation time and also in the reduction in the cost of manufacture

Estudo das propriedades mecânicas de biocompósitos de polipropileno reforçados com fibras naturais

This research presents an approach to the addition of curauá fibers and licuri fibers in a polypropylene resin matrix, such as an alternative proposal to reinforce the polymeric composites. Fiber content of 0 %, 5 %, 10 %, and 20% were analyzed for verification of their mechanical properties comparing them, inclusive with the properties of polypropylene. The grainulated biocomposites had been prepared in an extrusora. The test bodies had been molded by injection and submitted to the mechanical essays uniaxial traction, flexion on three points, impact, in addition to thermal tests (HDT). These biocomposites had been also subjected the essay physicist-chemistry index of fluidity (IF). It was observed that the biocomposites of PP with 20% curauá, obtained bigger increase in the modulus of elasticity and a bigger reduction in the resistance to the impact. In the mechanical behavior, for all the biocomposites, these were increases in values of the limit of drainage and tension of rupture, when tested by uniaxial traction, as they added the fibers. Another important point was the increase of the resistance the flexion. It was also noted that the addition of fibers reduced the thermal degradation of the mixture natural fibers / polypropylene.

Compósito reforçado com sisal para aplicação na moda

The objective of this research is the fabrication of a composite reinforced with dyed sisal fiber and polyester matrix for application in the fields such as, fashion, clothing, interior textiles; fashion accessories are some of the examples. For the fabrication of the composite, the sisal fibers were subjected to processes such as: chemical treatment with sodium hydroxide (NaOH) in the removal of impurities; bleaching for removing the yellowish color of the natural fiber and dyeing with direct dyes to confer the colors blue, green and orange. The search for new technologies ecologically correct has become a major concern in recent decades. Studies show that composite polymer reinforced by natural fibers is suitable for a large number of applications, and its use is advantageous in terms of economic and ecological. The dyed fibers were cut to a length of 30 mm, is used in the confection of webs. For this purpose, a web preparer by immersion, developed in the Laboratory of Chemical Textile of UFRN. The composite sheets measuring 300 x 300 x3 mm were molded by compression, with unsaturated orthophthalic polyester as matrix, and the samples in sizes 150 x 25 x 3 mm were cut with the aid of a laser machine, to be subjected to traction and flexion. The mechanical properties of traction and flexion in three points were performed in the Laboratory of metal and mechanical tests of Materials Engineering of UFRN. The resulting samples from the tests were evaluated in scanning electron microscope (SEM) at CTGas RN. On the basis of the analysis of the results from the mechanical tests, it was observed that the composite had good mechanical behavior, both in traction as in flexion. Furthermore, it was observed that in the water absorption test, the samples had a different percentage among themselves, this occurred due to the variation of density found in the fibre webs. The images of the SEM showed the failures from the manufacturing process and the adhesion of fibre/matrix. When the samples were prepared with the dyed fibers to be applied in fashion, the results were positive, and it can be concluded that the main objective of this work was achieved

Envelhecimento ambiental em compósitos poliméricos à base de tecidos de reforços híbridos

The utilization of synthetic fibers for plastic reinforcement is more and more frequent and this growing interest requires that their mechanic behavior under the most variable conditions of structural applications be known. The use of such materials in the open and exposed to the elements is one of them. In this case, it becomes extremely necessary to study their mechanical properties (strength, stiffness) and the mechanism of fracture by which the environment aging them out. In order to do that, the material must be submitted to hot steam and ultraviolet radiation exposure cycles, according to periods of time determined by the norms. This study proposal deals with the investigation of accelerated environmental aging in two laminated polymeric composites reinforced by hybrid woven made up of synthetic fibers. The configurations of the laminated composites are defined as: one laminate reinforced with hybrid woven of glass fibers/E and Kevlar fibers/49 (LHVK) and the other laminate is reinforced with hybrid tissue of glass fibers/E and of carbon fibers AS4 (LHVC). The woven are plane and bidirectional. Both laminates are impregnated with a thermofix resin called Derakane 470-300 Epoxy Vinyl-Ester and they form a total of four layers. The laminates were industrially manufactured and were made through the process of hand-lay-up. Comparative analyses were carried out between their mechanical properties by submitting specimen to uniaxial loading tractions and three-point flexion. The specimen were tested both from their original state, that is, without being environmentally aging out, and after environmental aging. This last state was reached by using the environmental aging chamber

Propriedades cerâmicas e imobilização do manganês em cerâmica estrutural

In this work is the addition of a metallic ion, of the metal Manganese, in a clay of Rio Grande do Norte state for structural ceramics use, the objective this study was to assess the evolution of ceramic properties. The clay was characterized by Chemical and Thermal analysis and Xray difraction. The metallic ion was added in the clay as aqueous solutions at concentrations of 100, 150 and 200 mg / L. The molded by extrusion and the burned were temperatures at 850, 950, 1050 and 1150 º C. Was made Chemical Analysis and investigated the following parameters environmental and ceramic: Solubility, Colour, Linear Retraction (%), Water Absorption (%), Gresification Curves, Apparent Porosity (%), Apparent Specific Mass (g/cm3) and Flexion Rupture Module (kgf/cm2). The results showed that increasing the concentration of metallic ion, properties such as Apparent Porosity (%), Water Absorption (%) decreases and the Flexion Rupture Module (kgf/cm2) increases with increasing temperature independent of the concentration of the ion. The gresification curves showed that the optimum firing temperatures were in the range between 950 and 1050 ° C. The evaluation of the properties showed that the ceramic material can be studied its use in solid brick and ceramic materials with structural function of filling. The results of solubility showed that the addition of ion offers no risk to the environment

The surface electromyography analysis of the non-plegic upper limb of hemiplegic subjects

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeito da adição de lodo de estação de tratamento de água (ETA) nas propriedades de material cerâmico estrutural

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

As sentenças com é ruim que no português brasileiro

Based on studies on the structure of copulates sentences in Brazilian Portuguese (PB), according to grammar theory, it s analyzed on this dissertation, the complex copulate sentences what, in the PB, initiated by the formation é ruim que in the PB, bringing the hypothesis that they can have one predicacional reading (PRED) and other especificacional reading (ESP). It s revealed what, though they are similar slightly, that makes the different that are triggered is structural configuration of sentence and the form as come emerged the its constituents: that of PRED interpretation, that we defined as Common Copulate Sentence (or SCC), it s checked that the constituent ruim, and only it, is predicate of a Small Clause, and appears in the structure on even position wherein is pronounced, not passing by the method of movement, from where introduce wide predication on all subject, that is the CP built-in; those sentences é ruim que understanding ESP, that denominate of Negative Copulate Sentence (or SCN), whereas the fixed expression contradict or right what is asserted in built-in, it s perceived what the ruim is a part of this fixed expression, and surely crystallized, which appears in structure per movement, germinated as adjunct of Inflexional Phrase (IP) and being elevation to specifier to FocP (or SpecFocP), where acquires discursive interpretation of focus. Besides the mode as the ruim or the fixed expression emerge in that sentences, the relation between the copula and main verb likewise contribute to distinguish the sentences: 1) regarding flexion of mode, when is a SCC, the copula must be in the mode indicative, and the main verb, in the subjunctive; when is a SCN, copula and main verb must be always on indicative; 2) regarding flexion of temp, both the copula as main verb of the SCC can be flexed, whereas at the SCN, the main verb can vary in present, past and future, but the copula should appear, necessarily, in third persona of present of indicative, what confirms our hypothesis that there is an fixed expression at the copulate sentences with é ruim que ESP. Other two evidences are pointed as characteristics that distinguish the sentence with é ruim que PRED of sentence with é ruim que ESP: 1) in semantics, the constituent ruim equals not good, that has appreciation, when the reading will PRED; already the pair é ruim equals not, at the ESP; 2) in prosody, there discrete sound elevation the ruim on the other constituents of SCC, PRED, while there is accentuated acoustic elevation on the ruim of SCN, ESP. Our search it is grounded in authors as Zanfeliz (2000), Modesto (2001), Mioto (2003), Kato & Ribeiro (2006), Lobo (2006), Quarezemin (2006, 2009, 2011, 2012) e Resenes (2009), researchers that devoted their attention on studies the formation and organization of the constituents of cleaved sentences and focalization of constituent, basing itself in approach generative of linguistic

Força muscular respiratória e capacidade funcional em idosas hipertensas com sonolência diurna excessiva

The restriction of physical fitness is directly related with hypertension and sleep disorders, while the respiratory muscle strength is associated with hypertension, but the literature is scarce regarding its relationship with sleep disorders and particularly with excessive daytime sleepiness. Objectives: To compare physical fitness and strength of respiratory muscles between people with hypertension with excessive daytime sleepiness (EDS) and non EDS people, those who do not feel excessive daytime sleepiness, in addition to relate aerobics resistance and functional mobility of patients. Methods: An observational, analytical and transversal study, evaluated 32 elderly with hypertension, divided into two groups (EDS and non EDS), in which the following topics were measured; respiratory muscular strength, functional fitness, level of physical activity, level of excessive daytime sleepiness, quality of sleep and intensity of the patients snoring. Results: There was a significant difference in the level of EDS (P=0,00) and quality of sleep (p=0,03), however, the data related to snoring intensity (p=0,18), maximum inspiratory pressure PImax (p=0,39) and maximum expiratory pressure PEmax (p=0,98) did not show any difference. Also, no significant difference was observed concerning physical fitness, presenting p=0,08 for the sitting and getting up test on the chair in 30 ; p=0,54 for the extension and flexing of the elbow test in 30 ; p=0,38 for the walking test 6 ; p=0,38 for the parking gear test 2 , p=0,08 for the sitting and reaching test; p=0,42 for the scratching the back test; p=0,49 for the getting up and walking test; and p=0,62 for the global rate of activity limitation. There was moderate positive correlation between 6MWT and 2MST, r=0,54 (p=0,01) and negative moderate correlation between 6MWT and TUG, r=-0,61 (p=0,000) and between 2MST and TUG, r=-0,60 (p=0,000). Conclusion: The presence of EDS in the hypertension people studied, showed a bad quality of sleep, however this sleepiness did not influence the strength of the respiratory muscles. The physical fitness came out diminished in all hypertension people, regardless of the presence or non presence of sleep disturbance; and there is a close relationship between cardiovascular resistance and physical mobility, since when there is less cardiovascular resistance, there is precarious physical mobility and vice-versa

Estudo comparativo da marcha de indivíduos hemiparéticos no solo e na esteira

The purpose of the study was to compare hemiparetic gait overground and on the treadmill. Seventeen chronic stroke patients were included in the study. They walked overground and on a treadmill level at the same speed. The Qualisys Medical AB motion analysis system was used to quantify the joint kinematic of the paretic lower limb and the spatio-temporal parameters on the two conditions: overground walking and treadmill walking on three samples of 5-minutes. During the first sample, the subjects walked on the treadmill with greater cadence, shorter stride length, shorter step time on the lower paretic limb, greater range of motion in the hip and knee, greater knee flexion at the initial contact, more extension of the knee and lower dorsiflexion of the ankle at the stance phase. It is important to emphasize that the maximal knee flexion and ankle dorsiflexion just occurred later on the treadmill. Comparisons between each walking sample on the treadmill hadn t revealed any changes on the gait parameters over time. Nonetheless, when analyzing the third walking sample on the treadmill and overground, some variables showed equivalence as such as the total range of motion of the hip, the knee angle at the initial contact and its maximal extension at the stance phase. In summary, walking on a treadmill, even thought having some influence on the familiarization process, haven t demonstrated a complete change in its characteristics of hemiparetic chronic patients