934 resultados para dc conductivity


Relevância:

20.00% 20.00%

Publicador:

Resumo:

An ion chromatography procedure, employing an IonPac AC15 concentrator column was used to investigate on line preconcentration for the simultaneous determination of inorganic anions and organic acids in river water. Twelve organic acids and nine inorganic anions were separated without any interference from other compounds and carry-over problems between samples. The injection loop was replaced by a Dionex AC15 concentrator column. The proposed procedure employed an auto-sampler that injected 1.5 ml of sample into a KOH mobile phase, generated by an Eluent Generator, at 1.5 mL min-1, which carried the sample to the chromatographic columns (one guard column, model AG-15, and one analytical column, model AS15, with 250 x 4mm i.d.). The gradient elution concentrations consisted of a 10.0 mmol l-1 KOH solution from 0 to 6.5 min, gradually increased to 45.0 mmol l-1 KOH at 21 min., and immediatelly returned and maintained at the initial concentrations until 24 min. of total run. The compounds were eluted and transported to an electro-conductivity detection cell that was attached to an electrochemical detector. The advantage of using concentrator column was the capability of performing routine simultaneous determinations for ions from 0.01 to 1.0 mg l-1 organic acids (acetate, propionic acid, formic acid, butyric acid, glycolic acid, pyruvate, tartaric acid, phthalic acid, methanesulfonic acid, valeric acid, maleic acid, oxalic acid, chlorate and citric acid) and 0.01 to 5.0 mg l-1 inorganic anions (fluoride, chloride, nitrite, nitrate, bromide, sulfate and phosphate), without extensive sample pretreatment and with an analysis time of only 24 minutes.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

As piperáceas brasileiras apresentam propriedades para serem utilizadas, entre outras aplicações, como inseticidas e antifúngicos. Dentre as piperáceas, pode-se citar a Piper hispidinervum C. DC. De suas folhas e dos talos finos extrai-se um óleo essencial rico em safrol, que é utilizado pela indústria como matéria-prima na manufatura, por exemplo, do piperonal. A sequência natural do processo para a obtenção do piperonal é o de submeter o safrol obtido da concentração do óleo essencial à isomerização para seu correspondente isômero estável chamado isosafrol. Apresenta-se neste artigo, por sua vez, a síntese do isosafrol diretamente do óleo essencial de pimenta-longa (Piper hispidinervium C. DC). Este óleo essencial apresenta o safrol como constituinte majoritário, possibilitando a sua isomerização para a produção de isosafrol, que é empregado nas indústrias farmacêuticas e de fragrâncias. O objetivo deste trabalho é o de apresentar a obtenção do isosafrol sem a necessidade da etapa de separação do safrol do óleo essencial de pimenta-longa. Para tanto, foram realizados ensaios de isomerização do óleo essencial, obtendo-se uma solução contendo 79,4 % da mistura cis, trans-isosafrol. Ressalte-se que o óleo essencial continha 86,4 % de safrol, resultando em alto rendimento na sua conversão a cis, trans-isosafrol de 97,1 %.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A pimenta longa (Piper hispidinervium C. DC.) é um arbusto originário da região amazônica, cujo óleo essencial é rico em safrol. O óleo essencial da pimenta longa é comercializado in natura, o que faz o processamento para a obtenção do safrol elemento fundamental de investigação científica e tecnológica. Uma importante etapa para a obtenção do safrol é a definição da estratégia da sua separação do óleo essencial a partir, por exemplo, da destilação. Neste caso, torna-se essencial o conhecimento de parâmetros termodinâmicos, tais como energia de ativação e calor latente de vaporização. Neste trabalho é utilizada a técnica termogravimétrica para a obtenção dos valores da energia de ativação e calor latente de vaporização do óleo essencial de P. hispidinervium. O processo de evaporação do óleo essencial obedece à cinética de ordem zero, resultando para a energia de ativação e calor latente de vaporização os valores 42,11 kJ.mol-1 e 43,73 kJ.mol-1, respectivamente.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Neste trabalho, a espécie Piper hispidinervum (pimenta longa), endêmica do estado do Acre, foi cultivada na região do Vale do Itajaí - SC, e sua adaptação foi avaliada em relação à composição química do óleo essencial obtido pelos processos de hidrodestilação convencional e por micro-ondas. O safrol foi identificado como o constituinte majoritário do óleo essencial desta espécie, o qual foi empregado como parâmetro de avaliação da capacidade de adaptação desta planta à região sul do Brasil, já que a proposta abrange avaliar a utilização desta espécie como fonte alternativa de safrol, em substituição a Canela Sassafrás (Ocotea odorifera), espécie muito explorada até a década de 90 nesta região. As amostras da planta foram obtidas de diferentes regiões do Acre e foram cultivadas na estação experimental da EPAGRI - Itajaí-SC. O óleo essencial das folhas forneceu um teor médio de safrol entre 76,6% e 89,9%. A análise por CG-DIC e CG-EM do óleo com maior concentração de safrol, apresentou os seguintes constituintes: safrol (89,93%), α-terpineno (0,35%), (E)-β-ocimeno (0,54%), terpinoleno (3,10%), valenceno (0,21%), (Z)-β-bisaboleno (1,70%) e guaiol (0,29%).

Relevância:

20.00% 20.00%

Publicador:

Resumo:

O óleo essencial de pimenta longa (Piper hispidinervum C. DC) é rico em safrol, tornando-o suscetível à reação de isomerização para a obtenção de cis, trans-isosafrol. O presente artigo apresenta a etapa de eletroxidação dos isômeros cis, trans-isosafrol advindos da isomerização direta do óleo essencial de pimenta longa, apresentando 99,7% de conversão em isosafrol glicol, o qual é sujeito à oxidação com conversão de 99% em piperonal, este apresentando 84,9% de pureza.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A pimenta-longa (Piper hispidinervum C. DC.) é uma das principais fontes alternativas para a produção de safrol empregado como matéria prima na fabricação de inseticidas naturais e aromatizantes. O objetivo da pesquisa foi avaliar o efeito da omissão dos macronutrientes e micronutrientes, sobre a composição mineral de plantas de pimenta-longa, e caracterizar os sintomas de deficiências decorrentes dessa limitação, utilizando-se da técnica do elemento faltante. O experimento foi conduzido em casa de vegetação, com quatro repetições e doze tratamentos, completo e omissão individual de N, P, K, Ca, Mg, S, B, Cu, Fe, Mn e Zn em delineamento inteiramente ao acaso. Os valores dos teores foliares nos tratamentos com omissão dos nutrientes foram inferiores àqueles obtidos no tratamento completo. As omissões individuais dos nutrientes promoveram alterações na composição mineral de macro e micronutrientes. Os teores de macronutrientes (g kg-1) e micronutrientes (mg kg-1) obtidos nas folhas sem (completo) e com sintomas de deficiências (omissões) foram, respectivamente: N = 18,32; P = 7,02; K = 22,17; Ca = 15,75; Mg = 8,25; S = 5,12; B = 42,25; Fe = 325,00; Mn = 100; Zn = 61,50, com deficiência: N = 8,98; P = 2,52; K = 8,57; Ca = 10,20; Mg = 1,85; S = 0,90; B = 15,50; Fe = 234,00; Mn = 55; Zn = 53.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The computation of the optical conductivity of strained and deformed graphene is discussed within the framework of quantum field theory in curved spaces. The analytical solutions of the Dirac equation in an arbitrary static background geometry for one dimensional periodic deformations are computed, together with the corresponding Dirac propagator. Analytical expressions are given for the optical conductivity of strained and deformed graphene associated with both intra and interbrand transitions. The special case of small deformations is discussed and the result compared to the prediction of the tight-binding model.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Research was conducted to investigate the potential for ecologically engineering a sustainable wetland ecosystem over pyritic mine tailings to prevent the generation of acid mine drainage. Ecological engineering is technology with the primary goal being the creation of self-sustainable ecological systems. Work involved the design and construction of a pilot-scale wetland system comprising three wetland cells, each covering 100 m2. Approximately forty tonnes of pyritic mine tailings were deposited on the base of the first cell above a synthetic liner, covered with peat, flooded and planted with emergent wetland macrophytes Typha latifolia, Phragmites australis, and Juncus effusus. The second cell was constructed as a conventional free water surface wetland, planted identically, and used as a reference wetland/experimental control. Wetland monitoring to determine long-term sustainability focused on indicators of ecosystem health including ecological, hydrological, physico-chemical, geochemical, and biotic metrics. An integrated assessment was conducted that involved field ecology in addition to ecological risk assessment. The objective of the field ecology study was to use vegetative parameters as ecological indicators for documenting wetlands success or degradation. The goal of the risk assessment was to determine if heavy-metal contamination of the wetland sediments occurred through metal mobilisation from the underlying tailings, and to evaluate if subsequent water column chemistry and biotic metal concentrations were significantly correlated with adverse wetland ecosystem impacts. Data were used to assess heavy metal bioavailability within the system as a function of metal speciation in the wetland sediments. Results indicate hydrology is the most important variable in the design and establishment of the tailings wetland and suggest a wetland cover is an ecologically viable alternative for pyritic tailings which are feasible to flood. Ecological data indicate that in terms of species richness and diversity, the tailings-wetland was exhibiting the ecological characteristics of natural wetlands within two years. Ata indicate that pH and conductivity in the tailings-wetland were not adversely impacted by the acid-generating potential or sulphate concentration of the tailings substrate and its porewater. Similarly, no enhanced seasonal impacts from sulphate or metals in the water column, nor adverse impacts on the final water quality of the outflows, were detected. Mean total metal concentrations in the sediments of the tailings-wetland indicate no significant adverse mobilisation of metals into the peat substrate from the tailings. Correlation analyses indicate a general increase in sediment metal concentration in this wetland with increasing water depth and pH, and a corresponding decrease in the metal concentrations of the water column. Sediment extractions also showed enrichment of Cd, Fe, Pb and Zn in the oxidisable fraction (including sulphides and organic matter) of the tailings-wetland sediments. These data suggest that adsorption and coprecipitation of metals is occurring from the water column of the tailings wetland with organic material at increasing depths under reducing conditions. The long-term control of metal bioavailability in the tailings wetland will likely be related to the presence and continual build-up of organic carbon binding sites in the developing wetland above the tailings. Metal speciation including free-metal ion concentration and the impact of physico-chemical parameters particularly pH and organic matter, were investigated to assess ecotoxicological risk. Results indicate that potentially bioavailable metals (the sum of the exchangeable and reducible fractions) within the tailings wetland are similar to values cited for natural wetlands. Estimated free-metal ion concentrations calculated from geochemical regression models indicate lower free-metal ion concentrations of Cd in the tailings wetland than natural wetlands and slightly higher free-metal ion concentrations of Pb and Zn. Increased concentrations of metals in roots, rhizomes and stems of emergent macrophytes did not occur in the tailings wetland. Even though a substantial number of Typha latifolia plants were found rooting directly into tailings, elevated metals were not found in these plant tissues. Phragmites also did not exhibit elevated metal concentrations in any plant tissues. Typha and Phragmites populations appear to be exhibiting metal-tolerant behaviour. The chemistry of the water column and sediments in Silvermines wetland were also investigated and were much more indicative of a wetland system impacted by heavy metal contamination than the tailings-wetland. Mean Dc, Fe, Mn, Pb and Zn concentrations in the water column and sediments of Silvermines wetlands were substantially higher than in the pilot wetlands and closely approximate concentrations in these matrices contaminated with metals from mining. In addition, mean sulphate concentration in Silvermines wetland was substantially higher and is closer to sulphate concentrations in waters associated with mining. Potentially bioavailable metals were substantially elevated in Silvermines wetland in comparison to the pilot wetlands and higher than those calculated for natural rive sediments. However, Fe oxy-hydroxide concentrations in Silvermines sediments are also much higher than in the pilot wetlands and this significantly impacts the concentration of free-metal ions in the sediment porewater. The free-metal ion concentrations for Pb and Zn indicate that Silvermines wetland is retaining metals and acting as a treatment wetland for drainage emanating from Silvermines tailings dam.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Some results of investigations of the connection of the parameters of thunderstorm activity with the air electrical conductivity are represented.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The results of investigations of the influence of aerosol pollution of atmosphere in Tbilisi (the capital of the Georgia, city with the greatest level of air pollution) on the total air electric conductivity in Dusheti (the small city, located in 40-45 km to the north of Tbilisi) are represented.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Inhalt dieser Arbeit ist die Entwicklung, der Aufbau und der Test eines DCDC Wandlers zur Bordnetzversorgung von Elektrofahrzeugen. In Kapitel 1 werden die Beweggründe für diese Bachelorarbeit genannt und die Parameter des Wandlers näher bestimmt. Kapitel 2 gibt einen Überblick über den Stand der Technik und beinhaltet verschiedene Wandler‐Topologien und ihre Wirkungsweise. Als wichtige Komponenten werden der Transformator betrachtet sowie die nötigen Leistungshalbleiter. Abschließend werden mögliche Regelverfahren kurz erläutert. In Kapitel 3 wird eine mögliche Vorgehensweise zur Entwicklung eines DCDC Wandlers dargelegt. Es wird eine Wandler‐Topologie ausgewählt, die Schaltung wird erstellt, die Komponenten werden dimensioniert. Danach werden anhand der Komponenten die Verluste und der Wirkungsgrad bestimmt. Es folgen 2 kurze Abschnitte, die sich mit der Abführung der Wärmeverluste und der Simulation der Schaltung beschäftigen. Zum Schluss erfolgt die Beschreibung eines Testaufbaus, ersten Messungen an der Schaltung. Kapitel 4 gibt eine Zusammenfassung der Bachelorarbeit wieder.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Com a finalidade de se estudar as possíveis propriedades alelopáticas da couve (Brassica oleracea L. var. acephala DC), foi conduzido um bioensaio, em condições de laboratório, na E.S.A."Luiz de Queiroz", em Piracicaba, SP. Foram utilizadas sementes de tomate (Lycopersicon esculentum Mill. cv.Santa Cruz) colocadas para germinar em soluções com diferentes concentrações (0; 25; 50 e 100%) do extrato obtido da parte aérea (folhas) da couve. Constataram-se efeitos pronunciadamente inibitórios de germinação das sementes de tomate nas maiores concentrações do extrato de couve. As plântulas que germinaram, nas parcelas tratadas com o extrato, mostraram-se com o crescimento reduzido, morfo-fisiologicamente anormais, e com maior tempo para o início da germinação. Todas essas características foram mais pronunciadas nas parcelas com maiores concentrações do extrato.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

En aquest treball s’implementa un model analític de les característiques DC del MOSFET de doble porta (DG-MOSFET), basat en la solució de l’equació de Poisson i en la teoria de deriva-difussió[1]. El MOSFET de doble porta asimètric presenta una gran flexibilitat en el disseny de la tensió llindar i del corrent OFF. El model analític reprodueix les característiques DC del DG-MOSFET de canal llarg i és la base per construir models circuitals tipus SPICE.