HTML5 no contexto de desenvolvimento e implementação de plataformas móveis com interfaces tácteis

Dissertação apresentada ao Instituto Politécnico de Castelo Branco para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Desenvolvimento de Software e Sistemas Interativos, realizada sob a orientação científica do Doutor Pedro Nuno Moreira da Silva, Professor Adjunto da Unidade Técnico-Científica de Informática do Departamento da Escola Superior de Tecnologia do Instituto Politécnico de Castelo Branco.

Desenvolvimento de plataforma digital para análise da satisfação dos utentes de unidades de saúde

Este documento descreve o trabalho realizado em conjunto com a empresa MedSUPPORT[1] no desenvolvimento de uma plataforma digital para análise da satisfação dos utentes de unidades de saúde. Atualmente a avaliação de satisfação junto dos seus clientes é um procedimento importante e que deve ser utilizado pelas empresas como mais uma ferramenta de avaliação dos seus produtos ou serviços. Para as unidades de saúde a avaliação da satisfação do utente é atualmente considerada como um objetivo fundamental dos serviços de saúde e tem vindo a ocupar um lugar progressivamente mais importante na avaliação da qualidade dos mesmos. Neste âmbito idealizou-se desenvolver uma plataforma digital para análise da satisfação dos utentes de unidades de saúde. O estudo inicial sobre o conceito da satisfação de consumidores e utentes permitiu consolidar os conceitos associados à temática em estudo. Conhecer as oito dimensões que, de acordo com os investigadores englobam a satisfação do utente é um dos pontos relevantes do estudo inicial. Para avaliar junto do utente a sua satisfação é necessário questiona-lo diretamente. Para efeito desenvolveu-se um inquérito de satisfação estudando cuidadosamente cada um dos elementos que deste fazem parte. No desenvolvimento do inquérito de satisfação foram seguidas as seguintes etapas: Planeamento do questionário, partindo das oito dimensões da satisfação do utente até às métricas que serão avaliadas junto do utente; Análise dos dados a recolher, definindo-se, para cada métrica, se os dados serão nominais, ordinais ou provenientes de escalas balanceadas; Por último a formulação das perguntas do inquérito de satisfação foi alvo de estudo cuidado para garantir que o utente percecione da melhor forma o objetivo da questão. A definição das especificações da plataforma e do questionário passou por diferentes estudos, entre eles uma análise de benchmarking[2], que permitiram definir que o inquérito iv estará localizado numa zona acessível da unidade de saúde, será respondido com recurso a um ecrã táctil (tablet) e que estará alojado na web. As aplicações web desenvolvidas atualmente apresentam um design apelativo e intuitivo. Foi fundamental levar a cabo um estudo do design da aplicação web, como garantia que as cores utilizadas, o tipo de letra, e o local onde a informação são os mais adequados. Para desenvolver a aplicação web foi utilizada a linguagem de programação Ruby, com recurso à framework Ruby on Rails. Para a implementação da aplicação foram estudadas as diferentes tecnologias disponíveis, com enfoque no estudo do sistema de gestão de base de dados a utilizar. O desenvolvimento da aplicação web teve também como objetivo melhorar a gestão da informação gerada pelas respostas ao inquérito de satisfação. O colaborador da MedSUPPORT é o responsável pela gestão da informação pelo que as suas necessidades foram atendidas. Um menu para a gestão da informação é disponibilizado ao administrador da aplicação, colaborador MedSUPPORT. O menu de gestão da informação permitirá uma análise simplificada do estado atual com recurso a um painel do tipo dashboard e, a fim de melhorar a análise interna dos dados terá uma função de exportação dos dados para folha de cálculo. Para validação do estudo efetuado foram realizados os testes de funcionamento à plataforma, tanto à sua funcionalidade como à sua utilização em contexto real pelos utentes inquiridos nas unidades de saúde. Os testes em contexto real objetivaram validar o conceito junto dos utentes inquiridos.

Document engineering approaches toward scalable and structured multimedia, web and printable documents

Document engineering is the computer science discipline that investigates systems for documents in any form and in all media. As with the relationship between software engineering and software, document engineering is concerned with principles, tools and processes that improve our ability to create, manage, and maintain documents (http://www.documentengineering.org). The ACM Symposium on Document Engineering is an annual meeting of researchers active in document engineering: it is sponsored by ACM by means of the ACM SIGWEB Special Interest Group. In this editorial, we first point to work carried out in the context of document engineering, which are directly related to multimedia tools and applications. We conclude with a summary of the papers presented in this special issue.

Engineering Concurrent and Event-driven Web Apps: An Agent-Oriented Approach based on the simpAL Language

Web is constantly evolving, thanks to the 2.0 transition, HTML5 new features and the coming of cloud-computing, the gap between Web and traditional desktop applications is tailing off. Web-apps are more and more widespread and bring several benefits compared to traditional ones. On the other hand reference technologies, JavaScript primarly, are not keeping pace, so a paradim shift is taking place in Web programming, and so many new languages and technologies are coming out. First objective of this thesis is to survey the reference and state-of-art technologies for client-side Web programming focusing in particular on what concerns concurrency and asynchronous programming. Taking into account the problems that affect existing technologies, we finally design simpAL-web, an innovative approach to tackle Web-apps development, based on the Agent-oriented programming abstraction and the simpAL language. == Versione in italiano: Il Web è in continua evoluzione, grazie alla transizione verso il 2.0, alle nuove funzionalità introdotte con HTML5 ed all’avvento del cloud-computing, il divario tra le applicazioni Web e quelle desktop tradizionali va assottigliandosi. Le Web-apps sono sempre più diffuse e presentano diversi vantaggi rispetto a quelle tradizionali. D’altra parte le tecnologie di riferimento, JavaScript in primis, non stanno tenendo il passo, motivo per cui la programmazione Web sta andando incontro ad un cambio di paradigma e nuovi linguaggi e tecnologie stanno spuntando sempre più numerosi. Primo obiettivo di questa tesi è di passare al vaglio le tecnologie di riferimento ed allo stato dell’arte per quel che riguarda la programmmazione Web client-side, porgendo particolare attenzione agli aspetti inerenti la concorrenza e la programmazione asincrona. Considerando i principali problemi di cui soffrono le attuali tecnologie passeremo infine alla progettazione di simpAL-web, un approccio innovativo con cui affrontare lo sviluppo di Web-apps basato sulla programmazione orientata agli Agenti e sul linguaggio simpAL.

Design of a dynamic e-commerce system with engineering applications

The primary purpose of this thesis was to design and develop a prototype e-commerce system where dynamic parameters are included in the decision-making process and execution of an online transaction. The system developed and implemented takes into account previous usage history, priority and associated engineering capabilities. The system was developed using three-tiered client server architecture. The interface was the Internet browser. The middle tiered web server was implemented using Active Server Pages, which form a link between the client system and other servers. A relational database management system formed the data component of the three-tiered architecture. It includes a capability for data warehousing which extracts needed information from the stored data of the customers as well as their orders. The system organizes and analyzes the data that is generated during a transaction to formulate a client's behavior model during and after a transaction. This is used for making decisions like pricing, order rescheduling during a client's forthcoming transaction. The system helps among other things to bring about predictability to a transaction execution process, which could be highly desirable in the current competitive scenario.

Electrospun silk-elastin-like fiber mats for tissue engineering applications

Protein-based polymers are present in a wide variety of organisms fulfilling structural and mechanical roles. Advances in protein engineering and recombinant DNA technology allow the design and production of recombinant protein-based polymers (rPBPs) with an absolute control of its composition. Although the application of recombinant proteins as biomaterials is still an emerging technology, the possibilities are limitless and far superior to natural or synthetic materials, as the complexity of the structural design can be fully customized. In this work, we report the electrospinning of two new genetically engineered silk-elastin-like proteins (SELPs) consisting of alternate silk- and elastin-like blocks. Electrospinning was performed with formic acid and aqueous solutions at different concentrations without addition of further agents. The size and morphology of the electrospun structures was characterized by scanning electron microscopy showing to be dependent of concentration and solvent used. Treatment with air saturated with methanol was employed to stabilize the structure and promote water insolubility through a time-dependent conversion of random coils into β-sheets (FTIR). The resultant methanol-treated electrospun mats were characterized for swelling degree (570-720%), water vapour transmission rate (1083 g/m2/day) and mechanical properties (modulus of elasticity of ~126 MPa). Furthermore, the methanol-treated SELP fiber mats showed no cytotoxicity and were able to support adhesion and proliferation of normal human skin fibroblasts. Adhesion was characterized by a filopodia-mediated mechanism. These results demonstrate that SELP fiber mats can provide promising solutions for the development of novel biomaterials suitable for tissue engineering applications.

Combining Formal Methods and Functional Strategies Regarding the Reverse Engineering of Interactive Applications

Abstract. Graphical user interfaces (GUIs) make software easy to use by providing the user with visual controls. Therefore, correctness of GUI’s code is essential to the correct execution of the overall software. Models can help in the evaluation of interactive applications by allowing designers to concentrate on its more important aspects. This paper describes our approach to reverse engineer an abstract model of a user interface directly from the GUI’s legacy code. We also present results from a case study. These results are encouraging and give evidence that the goal of reverse engineering user interfaces can be met with more work on this technique.

Models for the Reverse Engineering of Java/Swing Applications

Abstract. Interest in design and development of graphical user interface (GUIs) is growing in the last few years. However, correctness of GUI's code is essential to the correct execution of the overall software. Models can help in the evaluation of interactive applications by allowing designers to concentrate on its more important aspects. This paper describes our approach to reverse engineering abstract GUI models directly from the Java/Swing code.

Engineering real-time applications with WorldFIP: tools and analysis

WorldFIP is standardised as European Norm EN 50170 - General Purpose Field Communication System. Field communication systems (fieldbuses) started to be widely used as the communication support for distributed computer-controlled systems (DCCS), and are being used in all sorts of process control and manufacturing applications within different types of industries. There are several advantages in using fieldbuses as a replacement of for the traditional point-to-point links between sensors/actuators and computer-based control systems. Indeed they concern economical ones (cable savings) but, importantly, fieldbuses allow an increased decentralisation and distribution of the processing power over the field. Typically DCCS have real-time requirements that must be fulfilled. By this, we mean that process data must be transferred between network computing nodes within a maximum admissible time span. WorldFIP has very interesting mechanisms to schedule data transfers. It explicit distinguishes to types of traffic: periodic and aperiodic. In this paper we describe how WorldFIP handles these two types of traffic, and more importantly, we provide a comprehensive analysis for guaranteeing the real-time requirements of both types of traffic. A major contribution is made in the analysis of worst-case response time of aperiodic transfer requests.

A web-based tool to evaluate the iterative processes of direct search methods

Constrained and unconstrained Nonlinear Optimization Problems often appear in many engineering areas. In some of these cases it is not possible to use derivative based optimization methods because the objective function is not known or it is too complex or the objective function is non-smooth. In these cases derivative based methods cannot be used and Direct Search Methods might be the most suitable optimization methods. An Application Programming Interface (API) including some of these methods was implemented using Java Technology. This API can be accessed either by applications running in the same computer where it is installed or, it can be remotely accessed through a LAN or the Internet, using webservices. From the engineering point of view, the information needed from the API is the solution for the provided problem. On the other hand, from the optimization methods researchers’ point of view, not only the solution for the problem is needed. Also additional information about the iterative process is useful, such as: the number of iterations; the value of the solution at each iteration; the stopping criteria, etc. In this paper are presented the features added to the API to allow users to access to the iterative process data.

Web-based application programming interface to solve nonlinear optimization problems

Nonlinear Optimization Problems are usual in many engineering fields. Due to its characteristics the objective function of some problems might not be differentiable or its derivatives have complex expressions. There are even cases where an analytical expression of the objective function might not be possible to determine either due to its complexity or its cost (monetary, computational, time, ...). In these cases Nonlinear Optimization methods must be used. An API, including several methods and algorithms to solve constrained and unconstrained optimization problems was implemented. This API can be accessed not only as traditionally, by installing it on the developer and/or user computer, but it can also be accessed remotely using Web Services. As long as there is a network connection to the server where the API is installed, applications always access to the latest API version. Also an Web-based application, using the proposed API, was developed. This application is to be used by users that do not want to integrate methods in applications, and simply want to have a tool to solve Nonlinear Optimization Problems.

Fractional order calculus: basic concepts and engineering applications

The fractional order calculus (FOC) is as old as the integer one although up to recently its application was exclusively in mathematics. Many real systems are better described with FOC differential equations as it is a well-suited tool to analyze problems of fractal dimension, with long-term “memory” and chaotic behavior. Those characteristics have attracted the engineers' interest in the latter years, and now it is a tool used in almost every area of science. This paper introduces the fundamentals of the FOC and some applications in systems' identification, control, mechatronics, and robotics, where it is a promissory research field.

Some applications of fractional calculus in engineering

Fractional Calculus FC goes back to the beginning of the theory of differential calculus. Nevertheless, the application of FC just emerged in the last two decades, due to the progress in the area of chaos that revealed subtle relationships with the FC concepts. In the field of dynamical systems theory some work has been carried out but the proposed models and algorithms are still in a preliminary stage of establishment. Having these ideas in mind, the paper discusses FC in the study of system dynamics and control. In this perspective, this paper investigates the use of FC in the fields of controller tuning, legged robots, redundant robots, heat diffusion, and digital circuit synthesis.

Personal learning environments: integration of Web 2.0 applications and content management systems

This paper presents an ongoing project that implements a platform for creating personal learning environments controlled by students, integrating Web 2.0 applications and content management systems, enabling the safe use of content created in Web 2.0 applications, allowing its publication in the infrastructure controlled by the HEI. Using this platform, students can develop their personal learning environment (PLE) integrated with the Learning Management System (LMS) of the HEI, enabling the management of their learning and, simultaneously, creating their e-portfolio with digital content developed for Course Units (CU). All this can be maintained after the student completes his academic studies, since the platform will remain accessible to students even after they leave the HEI and lose access to its infrastructure. The platform will enable the safe use of content created in Web 2.0 applications, allowing its protected publication in the infrastructure controlled by HEI, thus contributing to the adaptation of the L&T paradigm to the Bologna process.

Teaching and learning with social software in higher education: content management systems integrated with Web-based applications as a key factor for success

The change of paradigm imposed by the Bologna process, in which the student will be responsible for their own learning, and the presence of a new generation of students with higher technological skills, represent a huge challenge for higher education institutions. The use of new Web Social concepts in teaching process, supported by applications commonly called Web 2.0, with which these new students feel at ease, can bring benefits in terms of motivation and the frequency and quality of students' involvement in academic activities. An e-learning platform with web-based applications as a complement can significantly contribute to the development of different skills in higher education students, covering areas which are usually in deficit.