Manejo químico de plantas adultas de Digitaria insularis com glyphosate isolado e em mistura com chlorimuronethyl ou quizalofop-p-tefuril em área de plantio direto

O objetivo deste trabalho foi avaliar a eficácia do herbicida glyphosate, isolado e em mistura com chlorimuron-ethyl ou quizalofop-p-tefuril, e o efeito da adição de óleo mineral à calda de glyphosate e chlorimuron-ethy no controle de plantas adultas de Digitaria insularis, em área sob sistema de plantio direto. Foram desenvolvidos dois experimentos, em condições de campo, um de novembro de 2005 a fevereiro de 2006 e outro de novembro de 2006 a janeiro de 2007, em Jaboticabal (SP). O delineamento experimental foi o de blocos ao acaso, em esquema fatorial, com quatro repetições. No primeiro experimento, foram avaliadas oito combinações (Fator A) entre o glyphosate (0,72; 1,44; 2,16 e 2,88 kg ha-1) e o chlorimuron-ethyl (0 e 10 g ha-1), três doses (Fator B) de óleo mineral (0; 0,5 e 1,0 L ha-1) e uma testemunha mantida infestada sem a aplicação de herbicida. No segundo, foram estudadas seis associações (Fator A) entre o glyphosate (1,44; 2,16 e 2,88 kg ha-1) e o quizalofop-p-tefuril (0 e 120 g ha-1) e um tratamento de quizalofop-p-tefuril (120 g ha-1) isolado, combinados com aplicações sequenciais (Fator B) de glyphosate (0; 0,72 e 1,44 kg ha-1), pulverizado 15 dias após a primeira a aplicação, além de uma testemunha infestada sem a aplicação de herbicida. Nas avaliações iniciais, no experimento de 2005/ 2006, em plantas pulverizadas com as maiores doses de glyphosate, isolado ou em mistura ao chlorimuron, havia injúrias visuais severas, com classificação do controle de bom (71% a 80%) a muito bom (81% a 90%). Com o decorrer do tempo, as plantas rebrotaram revelando seu potencial de recuperação e a ineficácia dos herbicidas no controle definitivo desta espécie. A adição de óleo mineral à calda de glyphosate e chlorimuron não contribuiu para o controle de D. insularis. No outro experimento, o quizalofop isolado e a sua associação ao glyphosate, combinados à aplicação sequencial de 1,44 kg ha-1 de glyphosate, resultaram em melhor controle da planta daninha.

Respostas fisiológicas de estresse no matrinxã (Brycon amazonicus) após exercício físico intenso durante a captura

Para determinar as respostas de estresse do matrinxã após perseguição com puçá, juvenis (26,7±6,7 g) foram aclimatados em caixas plásticas e submetidos aos tratamentos: Controle (sem perseguição), Perseguição por 2 minutos, Perseguição por 5 minutos, Perseguição por 10 minutos (quatro repetições, N=8/tratamento). Amostras de sangue foram coletadas 15, 30 e 60 minutos após a perseguição para determinação do cortisol, glicose, sódio, cloreto, potássio, hematócrito, hemoglobina, número total de eritrócitos e osmolaridade. O perfil das respostas após o exercício físico dos peixes não mostrou as alterações típicas do estresse. Até 60 minutos após o estímulo, não ocorreram alterações nos níveis sanguíneos de cortisol, glicose e potássio nos peixes dos diferentes tratamentos. Os níveis de cloreto foram reduzidos 15 minutos após a natação forçada, enquanto os níveis do sódio mais baixos foram registrados 60 minutos depois. Houve redução da osmolaridade a partir dos 30 minutos após o estímulo, independente do tempo de perseguição. A natação forçada não interferiu nos indicadores hematológicos, corroborando os outros indicadores usados. Dessa forma, o exercício intenso dos peixes por até 10 minutos não foi estímulo suficiente para gerar respostas de estresse, sugerindo que o matrinxã é bastante resistente ao manejo de criação.

Uso de agentes microbianos e químico para o controle de Meloidogyne incognita em soja

Nematoides de galhas constituem importante grupo de patógenos da cultura da soja e o manejo integrado é uma das principais medidas de controle que visam à redução de perdas econômicas. Neste trabalho foi avaliada a eficácia dos fungos Paecilomyces lilacinus (Thom.) Samsom e Pochonia chlamydosporia (Goddard) Zare & Gams (sinonímia Verticillium chlamydosporium), de um produto comercial à base de Bacillus sp. (Nemix) e do nematicida químico Aldicarb no controle de Meloidogyne incognita em soja, variedade M-SOY 6101. O experimento foi realizado em casa-de-vegetação no delineamento experimental de blocos casualizados com nove tratamentos (três produtos biológicos usados no tratamento de sementes com ou sem a aplicação em pós-emergência, Aldicarb aplicado apenas em pós-emergência e duas testemunhas) e quatro repetições. Aldicarb reduziu o número de ovos e de juvenis do nematoide. P. lilacinus foi o mais atuante dos agentes biológicos, favorecendo a manutenção da quantidade de matéria seca da raiz de soja e reduzindo o número de ovos. O produto Nemix e P. chlamydosporia somente tiveram ação efetiva na redução do número de ovos do nematoide. Com base nos resultados, foi possível concluir que o agente químico e os agentes biológicos avaliados neste trabalho tiveram moderada atividade no controle de M. incognita em soja.

Eficiência e custo do controle químico da mancha de alternaria em tangor murcote

A mancha de alternaria, causada por Alternaria alternata f. sp. citri, afeta tangelos Minneola, tangerinas Dancy, tangores Murcote e, menos freqüentemente, tangelos Orlando, tangerinas Novas, Lees e Sunburst. Esta doença causa desfolha grave, queda de frutos e manchas nas frutas. O objetivo deste trabalho foi estabelecer o melhor fungicida e a melhor dose para o controle da mancha marrom de alternaria. O delineamento experimental foi de parcelas subdivididas em blocos, com 10 tratamentos principais e 3 doses (subparcelas), com 5 repetições. Foram feitas 5 aplicações, com intervalo de 15 dias. Os tratamentos foram: azoxystrobin, pyraclostrobin, trifloxystrobin, trifloxystrobin + tebuconazole (2 aplicações) seguido de 3 aplicações de mancozeb, difenoconazole, trifloxystrobin + propiconazole, iprodione, trifloxystrobin + propineb (2 aplicações) seguido de 3 aplicações de oxicloreto de cobre, oxicloreto de cobre + óleo e testemunha. Simultaneamente foram feitas avaliações de incidência e número de lesões por folha. Ao surgimento dos frutos foram avaliadas a incidência em frutos e a produtividade em Kg/ha. Todos os tratamentos foram superiores à testemunha quanto a produtividade. Entre os produtos utilizados o tratamento com trifloxystrobin + propiconazole foi rentável comparando-se custo e produtividade.

Modificação superficial do tecido de malha de ácido polilatico (PLA) por tratamento plasma

Some fibrous materials, for having properties such as biocompatibility, strength and flexibility, are of great interest for medical and pharmaceutical applications. Among these materials, the fabric made from polylactic acid (PLA) has received special attention, and beside to present these features, is derived from biological source, antimicrobial and bioabsorbable. One of the limitations of PLA is its low wettability and capillarity. Due to this, it is necessary to perform surface modification of the knitted fabric, increasing its hydrophilicity. This work aims to realize the plasma treatment at low pressure in order to increase the surface energy of the polymer. The work was divided into three steps: i) Influence of the gas ratio (oxygen and nitrogen) in the surface modification of PLA fabric after the plasma treatment, ii) physical characterization and physicochemical surface tissue; iii) Evaluation of the effect from current and gas ratio in the capillary rise of tissues and iv) Study of capillarity in yarns and fabrics. The results showed that better gas ratios were the atmospheres: 100% oxygen; 100% nitrogen and 50% oxygen and 50% nitrogen. The surface characterization showed changes in topography and introduction of polar groups which increased the wettability of the fabric. In another part of this study, it was found that the atmosphere containing only nitrogen gas showed the most capillary rise to a current of 0.15 A. The results in capillary yarns and fabrics showed that the thread reached equilibrium in a time much less than the fabric to an atmosphere of 100% nitrogen and 0.15 A. Current Plasma technology was effective to increase the hydrophilicity of PLA fabric, providing surface characteristics favorable for future application in the biomedical field

Velocidade do fluxo de ar em barra de pulverização no controle químico de Anticarsia gemmatalis, Hübner e percevejos na cultura da soja

A lagarta Anticarsia gemmatalis (Hübner) e os percevejos fitófagos são pragas importantes na cultura da soja no Brasil. Este trabalho objetivou avaliar o controle desses insetos após o tratamento com inseticidas, sob diferentes velocidades do fluxo de ar junto à barra de pulverização nessa cultura. O experimento foi desenvolvido em Botucatu, na cultura da soja [Glycine max (L.) Merrill], var. Conquista (safra 2007/08), no delineamento experimental de blocos ao acaso (quatro velocidades do fluxo de ar: 0, 9, 11 e 29 km h-1), mais testemunha, totalizando cinco tratamentos e quatro repetições. No estádio de desenvolvimento vegetativo (V10) realizou uma aplicação do inseticida deltametrina na dosagem de 6,5 g do i.a. ha-1 para o controle de lagartas e no estádio de desenvolvimento reprodutivo (R6) aplicou o inseticida tiametoxam associado com lambda-cialotrina na dosagem de 25,38 + 19,08 g do i.a. ha-1 para o controle de percevejos. A aplicação foi feita com um pulverizador Advanced Vortex 2000, com pontas de pulverização jato cônico JA2, conferindo um volume de calda de 200 L ha-1. As avaliações antes e após a aplicação foram realizadas pelo método de batidas no pano. Avaliaram-se os danos causados por percevejos, considerando-se a porcentagem de danos às sementes, ao poder germinativo e à produtividade. No geral, o número médio de lagartas e percevejos foram significativamente menores nas parcelas tratadas em relação ao obtido na testemunha. Não houve diferença de produtividade entre os tratamentos. A porcentagem de emergência e sementes picadas por percevejos foram significativamente menores nos tratamentos que receberam o controle em comparação à testemunha.

Controle químico de plantas daninhas aquáticas em condições controladas - caixa d'água

Durante o ano de 1998 foram conduzidos quatro experimentos em Botucatu, Estado de São Paulo, Brasil, em condições de caixas d'água, com o objetivo de estudar o efeito de alguns herbicidas sobre Eicchornia crassipes, Pistia stratiotes, Thypha subulata e Salvinia molesta. Os herbicidas e doses utilizadas foram: imazapyr a 125, 250, 500, 1.000, 1.500 e 2.000 g e.a./ha; 2,4 D a 1.200 g e.a./ha; glyphosate a 3.360 g e.a./ha. Houve, ainda, uma testemunha sem aplicação de herbicidas. Os experimentos foram instalados no delineamento experimental em blocos ao acaso, com quatro repetições. As parcelas experimentais foram constituídas pelas caixas d'água com dimensões de 60x60x60 cm e colocadas a pleno sol no campo. Utilizou-se 3, 12, 25 e 60 plantas/caixa de T. subulata, P. stratiotes, E. crassipes e S. molesta, respectivamente. Os herbicidas foram aplicados com pulverizador costal a pressão constante de CO2 de 1,75 Bar, munido de barra com bicos Teejet 110.02 VS e com um consumo de calda de 200 l/ha. Foram efetuadas avaliações visuais de controle de sete em sete dias por 35 a 49 dias, dependendo da espécie. Todos os herbicidas testados foram eficientes no controle de E. crassipes e o imazapyr foi o único herbicida a promover morte total das plantas, independente da dose utilizada. Os herbicidas 2,4 D e glyphosate não foram eficientes no controle de P. stratiotes. O herbicida imazapyr foi eficiente no controle de P. stratiotes, exceto na dose de 125 g e.a./ha. Todos os herbicidas foram eficientes no controle de T. subulata, exceção ao imazapyr na dose de125 g e.a./ha. Houve rebrota de T. subulata nas parcelas aplicadas com 2,4 D. Nenhum tratamento químico foi eficiente no controle de S. molesta.

Desenvolvimento de um destilador solar para tratamento de águas de produção de petróleo com vistas a sua utilização na agricultura e geração de vapor

The production of petroleum is frequently accomplished with great volumes of water, that it is carried of the underground with the oil. It is a challenge of the present century the development of technologies that allow the use of waste water for purposes that consume great amounts of water and don't demand as rigid as the one of the drinking water requirements. The solar distillation has been configuring as an alternative of clean technology for desalination of brine and saline. Besides causing the minimum possible damage to the environment, it takes advantage of an abundant and free energy source: the solar energy. That study aims to develop a Solar Distillator for treatment of the produced water of the oil wells, to obtain an efluent to use in agriculture and vapor generation. The methodology for collection, conservation and analysis of the physical-chemical parameters obeyed the norms in APHA (1995). The sampling was of the composed type. Experiments were accomplished in the solar distillation pilot and simulation in thermostatic bathing. The operation was in batch system and for periods of 4, 6 and 12 h. The developed Distillator is of the type simple effect of two waters. It was still tested two inclination angles for covering; 20º and 45º. The Distillator presented minimum of 2,85 L/m2d revenues and maximum of 7,14 L/m2d. The removals of salts were great than 98%. The removal of TOC in the simulation was great than 90%. In agreement with the data of energy and mass balance, it was verified that the developed solar Distillator presented compatible revenues with those found in literature for similar types. It can be inferred that the obtained distilled water assists to the requirements CONAMA in almost all the points and could be used for irrigation of cultures such as cotton and mamona. As the distilled water has characteristics of fresh water it can be used in the generation of vapor

Estudo da desidratação de tomates em pedaços com pré-tratamento osmótico

Vegetables drying plays an important role in the field of food dehydration, being a very old practice that was originated from sun drying items of food in order to preserve them to be consumed during the periods of scarcity. One of these vegetables is the tomato, that was originally grown in South America. Tomatoes are easily perishable after being picked up from the tree and this makes the process of tomato dehydration a challenge due to the high amount of water (95%) contained in them. The present research work was mainly intended to develop alternative processes for tomato conservation, by drying slices of skinned and unskinned tomatoes in the in natura form or in the osmotically pre-dehydrated form. Firstly, the best conditions of the osmotic pre-dehydration process were defined including temperature, immersion time and concentration of the osmotic solution, based on the results of water loss, solids gain and weigh reduction of the pre-dehydration tomatoes at different processing conditions. The osmotic solution used was made up of NaCl (5 and 10%) and sucrose (25 and 35%) at different combinations. For a fixed conditions of osmotic pre-dehydration, the drying tests of the pre-processed and in natura tomatoes were carried out in a stove with air circulation and a convective dryer with trays, at two levels of temperature. The sensorial analysis of the osmotically pre-treated and unskinned dehydrated tomatoes was carried out as well as a study on the their shelf-live. The results obtained showed that the drying of the tomatoes took place as a result of the internal control of the water transport, and did not show a constant rate, while two distinct periods of the decreasing phase were observed. The osmotic pre treatment substancially reduced the initial amount of humidity in the tomatoes, thus reducing the necessary time for the product to attain levels of intermediate humidity. The impermeability of the tomato skin was identified as well as the unfavorable influence of the pre-treatment on the unskinned tomatoes, whose solid gain brought about a decrease in the water activity with subsequent reduction of the drying rate. Despite the various simplifications carried out during the development of this study, the proposed diffusive model adjusted to the experimental data satisfactorily, thus making it possible to determine the effective coefficients of diffusion, whose results were consistent and compatible with those found in the current literature. Concerning the higher rates of evaporation and the lowest processing time, the best results were obtained in the drying of the unskinned, in natura tomatoes and of the skinned, pre-dehydrated tomatoes, at 60ºC, both processed in the convective drier. The results of the sensorial analysis of the unskinned and pre-treated product did not prove to be satisfactory. Regarding the shelf-live of the tomatoes, for a period of 45 days, no physicochemical or microbiological alteration of the product was noted

Desenvolvimento de sorvete probiótico a base de leite de cabra: estudo da formulação, características físico químicas, sensoriais e viabilidade das bactérias probióticas

This work targetet the caprine ice cream production added with probiotic bacteria Bifidobacterium animalis subsp. lactis. It is divided into two parts. In the first one, four caprine ice cream formulations were evaluated, in which it was used hydrogenated fat (F1 and F3) or fat substitute (F2 and F4) in two different flavors (F1 and F2, passion fruit, F3 and F4, guava). Statistical differences (p<0.05) were detected for their physical-chemical properties, mainly for total solids and fat, but no differences were observed for melting test results. When it went to sensory acceptance, all four ice cream formulations reached high acceptance indexes, mostly formulation F4, which was selected for further studies. In the second part, F4 formulation was prepared with the addition of probiotic bacteria Bifidobacterium animalis subsp. lactis. The growth kinetics was studied and it was observed that the cellular concentration peak was reached after four fermentation hours (10.14 log UFC/g). This time was selected for pre-fermentation procedure and posterior addition at ice cream syrup. In this part of the study, two experimental groups were evaluated: group G1, in which the probiotic addition occurred before the maturation step and group G2, which included a pre-fermentation step and probiotic addition after ice cream maturation. The physical-chemical properties of these two ice cream groups were similar, except for pH, which was higher for group G2 (p<0.05). G1 samples had superior melting rate (3.566 mL/min) and both groups presented microbiological and sanitary results in accordance to current Brazilian legislation. Also, G1 and G2 were considered sensory accepted due to their acceptance indexes higher than 70%. G1 and G2 sensory profiles were similar (p>0.05), and both ice cream samples exhibited high creaminess (6.76 to 6.91) and mouth melting sensation (6.53 to 6.67) scores, while low sandiness scores (0.85 to 0.86) were observed, positive characteristics for this kind of food product. During the first 24 hours after ice cream production, the population of B. animalis subsp. lactis decreased, reaching 7.15 e 6.92 log CFU/g for G1 and G2, respectively. Probiotic bacteria counts fluctuated in ice cream samples during the first 108 days at frozen storage, especially for G2 group. Decreased probiotic viability was observed for G1 samples during the first 35 days of frozen storage, mild variation between 35 and 63 days and stabilized counts were observed after this time. After 21 days at frozen storage, ice cream samples of G1 and G2 groups reached 1.2 x 109 and 1.3 x 109 CFU/portion, respectively. After 108 days under these storage conditions, the survival rate of B. animalis subsp. lactis was 94.26% and 81.10% for G1 and G2 samples, respectively. After simulation of gastroenteric conditions, G2 group reached 9.72 x 105 CFU/portion. Considering the current requirements of Brazilian legislation, which stipulates that functional foods must have minimum probiotic count between 108 and 109 CFU/portion and detectable probiotic bacteria after being submitted to gastroenteric conditions, it is concluded that the ice cream with the addition of Bifidobacterium animalis subsp. lactis made as shown in this work, can be considered as a dairy functional food

Caracterização dos resíduos esgotados de sistemas de tratamento individual de esgotos de Natal

In Natal still dominates the use of individual disposal systems for domestic sewage, once only 29% of the city has a sewarage system. Wastes that are accumulated in these individual treatment systems should be exhausted periodically, service provided by collector entrepreneurs. Some of these companies causing major damage to the environment. In Natal, only two companies have their own septage (RESTI) treatment system, which were designed with parameters from domestic sewage generating strain and inefficient systems. Therefore, the characterization becomes essential as a source of parameters for their design. Thus, this work presents the physical-chemical and microbiological characterization of waste pumped from individual sewage treatment systems. Samples collections were made weekly from 5 different trucks at the reception point on the treatment plant on the point of the preliminary treatment. From each truck it was taken 5 samples during the discharge in order to make a composite sample. Afterwards, samples were carried out to laboratory and analyses for determination of temperature, pH, conductivity, BOD, COD, nitrogen (ammonia e organic), alkalinity, oils, phosphorus, solids, faecal coliforms and helminth egg. The results were treated as a single database, and ranked according to its generating source (multi and single house, lodging, health, services and / or food), area of origin (metropolitan, south and north) and type of system (cesspits, septic tank and / or sink). Through these data it was possible to verify that the type of system adopted by most in Natal and the metropolitan region is cesspit, besides to confirm the difference between the septage of areas with a population have different social and economical characteristics. It was found that the septage have higher concentrations than domestic sewage, except for thermotolerant coliforms that showed concentrations of 1,38E+07. Among the parameters studied, is the median values identified for COD (3,549 mg / L), BOD (973mg / L) and total solids (3.557mg / L). The volatile fraction constitutes about 70% of the total solids of the septage. For helminths has been a median of 7 eggs/L. In general, the characteristics of the waste followed the variability found in the literature reviewed for all variables, showing high amplitudes

Efeito do exercício físico e estatinas na função muscular em animais com dislipidemia

As estatinas são utilizadas no tratamento das dislipidemias, com grande tolerância; no entanto, vários efeitos colaterais podem surgir, destacando-se miopatia. A prática regular do exercício físico (EF) produz modificações favoráveis no perfil lipídico; entretanto, pode gerar lesões musculares. OBJETIVO: Avaliar o efeito da associação entre exercício físico e estatinas na função muscular, pela análise histológica, em modelo experimental animal com dislipidemia. MÉTODOS: Foram utilizados 80 ratos machos Wistar, distribuídos em oito grupos, incluindo animais submetidos à dieta hipercolesterolêmica (DH), sinvastatina com (G1) e sem (G2) EF; DH e fluvastatina, com (G3) e sem EF (G4); alimentados com ração comercial (RC) na presença (G5) e ausência de (G6) EF; DH submetidos (G7) ou não (G8) a EF. A DH foi administrada por 90 dias, as estatinas e prática de EF em esteira rolante por oito semanas. Os animais foram sacrificados, e o músculo sóleo retirado para análise histológica. Aplicaram-se os testes t de Student pareado e análise multivariada, com nível significante para p < 0,05. RESULTADOS: As principais alterações histológicas encontradas foram fibras de diferentes diâmetros, atróficas, em degeneração, splitting, edema, infiltrado inflamatório. Essas alterações foram observadas em 90% dos animais do grupo G1, 80% do G2, 70% do G3, 30% do G4, 40% do G5 e 30% do G7. Nos grupos G6 e G8 identificaram-se fibras musculares com morfologia preservada. CONCLUSÕES: Na avaliação histológica muscular, a associação entre fluvastatina, sinvastatina e exercício físico acarreta alterações morfológicas com predomínio no uso da sinvastatina, variando de grau leve a grave, no músculo sóleo de ratos, induzidos pelos inibidores da HMG-CoA redutase.

Análise dos Processos de Flotação e Oxidação Avançada para o Tratamento de Efluente Modelo da Indústria do Petróleo

The generation of wastes in most industrial process is inevitable. In the petroleum industry, one of the greatest problems for the environment is the huge amount of produced water generated in the oil fields. This wastewater is a complex mixture and present great amounts. These effluents can be hazardous to the environmental without adequate treatment. This research is focused in the analysis of the efficiencies of the flotation and photo-oxidation processes to remove and decompose the organic compounds present in the produced water. A series of surfactants derivated from the laurilic alcohol was utilized in the flotation to promote the separation. The experiments have been performed with a synthetic wastewater, carefully prepared with xylene. The experimental data obtained using flotation presented a first order kinetic, identified by the quality of the linear data fitting. The best conditions were found at 0.029 g.L-1 for the surfactant EO 7, 0.05 g.L-1 for EO 8, 0.07 g.L-1 for EO 9, 0.045 g.L-1 for EO 10 and 0.08 g.L-1 for EO 23 with the following estimated kinetic constants: 0.1765, 0.1325, 0.1210, 0.1531 and 0.1699 min-1, respectively. For the series studied, the most suitablesurfactant was the EO 7 due to the lower reagent consumption, higher separation rate constant and higher removal efficiency of xylene in the aqueous phase (98%). Similarly to the flotation, the photo-Fenton process shows to be efficient for degradation of xylene and promoting the mineralization of the organic charge around 90% and 100% in 90 min

Tratamento eletroquímico de água produzida sintética para remoção de hidrocarbonetos policíclicos aromáticos

The aim of this work is the treatment of produced water from oil by using electrochemical technology. Produced water is a major waste generated during the process of exploration and production in the oil industry. Several approaches are being studied aiming at the treatment of this effluent; among them can be cited the biological process and chemical treatments such as advanced oxidation process and electrochemical treatments (electrooxidation, electroflotation, electrocoagulation, electrocoagulation). This work studies the application of electrochemical technology in the treatment of the synthetic produced water effluent through the action of the electron, in order to remove or transform the toxic and harmful substances from the environment by redox reactions in less toxic substances. For this reason, we used a synthetic wastewater, containing a mixture H2SO4 0,5M and 16 HPAs, which are: naphthalene, acenaphthylene, acenaphthene, fluorene, phenanthrene, anthracene, fluoranthene, pyrene, benzo (a) anthracene, chrysene, benzo(b)fluoranthene, benzo(k) fluoranthene, benzo(a)pyrene, indeno(1,2,3-cd)pyrene, dibenzo(a, h)anthracene, benzo(g, h, i)perylene. Bulk electrochemical oxidation experiments were performed using a batch electrochemical reactor containing a pair of parallel electrodes, coupled with a power supply using a magnetic stirrer for favoring the transfer mass control. As anodic material was used, a Dimensionally Stable Anode (DSA) of Ti/Pt, while as cathode was used a Ti electrode. Several samples were collected at specific times and after that, the analysis of these samples were carried out by using Gas Chromatography Coupled to Mass Spectrometry (GC - MS) in order to determine the percentage of removal. The results showed that it was possible to achieve the removal of HPAs about 80% (in some cases, more than 80%). In addition, as an indicator of the economic feasibility of electrochemical treatment the energy consumption was analyzed for each hour of electrolysis, and based on the value kWh charged by ANEEL, the costs were estimated. Thus, the treatment costs of this research were quite attractive

Tecnologia eletroquímica como tratamento alternativo de efluentes têxteis sintéticos utilizando ânodos de platina e diamante

In this work, the treatment of synthetic wastewaters containing Remazol Red BR (RRB) and Novacron Blue C-D (NB) by anodic oxidation using boron doped diamond anodes (BDD) and Novacron Yellow (YN) using BDD and Platinum (Pt) anodes was investigated. Galvanostatic electrolyses of RRB and NB synthetic wastewaters have led to the complete decolorization removal at different operating conditions (current density, pH and temperature). The influence of these parameters was investigated in order to find the best conditions for dyestuff colour removal. According to the experimental results obtained, the electrochemical oxidation process is suitable for decolorizing wastewaters containing these textile dyes, due to the electrocatalytic properties of BDD and Pt anode. Energy requirements for removing colour during galvanostatic electrolyses of RRB, NB and YN synthetic solutions depends mainly on the operating conditions; for example for RRB, it passes from 3.30 kWh m-3 at 20 mA cm-2 to 4.28 kWh m-3 at 60 mA cm-2 (pH = 1); 15.23 kWh m-3 at 20 mA cm-2 to 24.75 kWh m-3 at 60 mA cm-2 (pH = 4.5); 10.80 kWh m-3 at 20 mA cm-2 to 31.5 kWh m-3 at 60 mA cm-2 (pH = 8) (data estimated per volume of treated effluent). In order to verify the Brazilian law regulations of NB and RRB synthetic solutions after electrochemical decolourisation treatment, Hazen Units values were determined and the total colour removal was achieved; remaining into the regulations. Finally, electrical energy cost for removing colour was estimated