Prenatal exposures to persistent organic pollutants as measured in cord blood and meconium from three localities of Zhejiang, China

Prenatal exposures to persistent organic pollutants were assessed using the levels of PCBs and organochlorine pesticides (OCPs) measured in cord blood and meconium samples from Luqiao and two other localities of the Zhejiang province in China. Luqiao is a town with the largest site for disassembly of PCB-containing obsolete transformers and electrical waste in China. The other two localities Pingqiao (100 km NW of Luqiao) and Lin'an (500 km NW of Luqiao) are towns without known electronic or electrical waste sites. A total of 23 PCB congeners (including 12 dioxin-like) and 6 OCPs were measured using the traditional GC-mu ECD technique. Micro-EROD bioassay was additionally used to measure TCDD-based TEQ levels of the 12 dioxin-like PCBs. Significant correlations were found between the TEQs measured by the two methods, supporting the application of micro-EROD as a practical toot for complementing the chemical analysis. The data showed that beta-HCH, p,p'-DDE, and 6 PCB congeners (101, 138 153, 180, 183, and 187) were the predominant pollutants, with PCB 138 being the best indicator (predictor) for total PCB levels. Cord blood and meconium from Luqiao have higher levels of PCBs than those from the other two localities, suggesting that a disassembly site for electronic and electric waste would provide an environment for greater exposure to these chemicals. The cord blood or meconium levels of beta-HCH, though likewise considerably high, were comparable in the three localities. Similar findings were observed for p,p'-DDE. Pollution by these OCPs might have come from past use of agricultural pesticides in the three localities. (c) 2007 Published by Elsevier B.V.

土地资源动态监测信息系统——以延安/安塞七乡镇为例

土地资源动态监测信息系统是在计算机软硬件支持下 ,对土地资源采集、输入、编辑、存储和综合分析应用的技术系统 ,它是土地资源动态监测、土地评价、土地利用规划和管理的有力工具。本文以延安 /安塞七乡镇为例 ,启用 ARC/INFO和 Arcview软件 ,建立土地资源动态监测系统 ,并对监测结果初步分析 ,为区域土地资源管理和合理利用提供服务

黄土丘陵第Ⅱ副区坝地资源潜力与坝系建造模式

在分析延安市宝塔区、安塞县南部 7乡镇的沟壑密度、布坝密度、现有坝地面积占耕地面积比重的基础上 ,提出了该区今后发展坝地的规模及淤地坝建设模式

STUDY ON THE SPATIAL PATTERNS OF LAND-USE CHANGE AND ANALYSES OF DRIVING FORCES IN NORTHEASTERN CHINA DURING 1990-2000

Land-use change is an important aspect of global environment change. It is, in a sense, the direct result of human activities influencing our physical environment. Supported by the dynamic serving system of national resources, including both the environment database and GIS technology, this paper analyzed the land-use change in northeastern China in the past ten years (1990 - 2000). It divides northeastern China into five land-use zones based on the dynamic degree (DD) of land-use: woodland/grassland - arable land conversion zone, dry land - paddy field conversion zone, urban expansion zone, interlocked zone of farming and pasturing, and reclamation and abandoned zone. In the past ten years, land-use change of northeastern China can be generalized as follows: increase of cropland area was obvious, paddy field and dry land increased by 74. 9 and 276. 0 thousand ha respectively; urban area expanded rapidly, area of town and rural residence increased by 76. 8 thousand ha; area of forest and grassland decreased sharply with the amount of 1399. 0 and 1521. 3 thousand ha respectively; area of water body and unused land increased by 148. 4 and 513. 9 thousand ha respectively. Besides a comprehensive analysis of the spatial patterns of land use, this paper also discusses the driving forces in each land-use dynamic zones. The study shows that some key biophysical factors affect conspicuously the conversion of different land- use types. In this paper, the relationships between land- use conversion and DEM, accnmlated temperature(>= 10 degrees C) and precipitation were analysed and represented. We conclude that the land- use changes in northeast China resulted from the change of macro social and economic factors and local physical elements. Rapid population growth and management changes, in some sense, can explain the shaping of woodland/grassland - cropland conversion zone. The conversion from dry land to paddy field in the dry land - paddy field conversion zone, apart from the physical elements change promoting the expansion of paddy field, results from two reasons: one is that the implementation of market-economy in China has given farmers the right to decide what they plant and how they plant their crops, the other factor is originated partially from the change of dietary habit with the social and economic development. The conversion from paddy field to dry land is caused primarily by the shortfall of irrigation water, which in turn is caused by poor water allocation managed by local governments. The shaping of the reclamation and abandoned zone is partially due to the lack of environment protection consciousness among pioneer settlers. The reason for the conversion from grassland to cropland is the relatively higher profits of fanning than that of pasturing in the interlocked zone of farming and pasturing. In northeastern China, the rapid expansion of built-up areas results from two factors: the first is its small number of towns; the second comes from the huge potential for expansion of existing towns and cities. It is noticeable that urban expansion in the northeastern China is characterized by gentle topographic relief and low population density. Physiognomy, transportation and economy exert great influences on the urban expansion.

地震P-S波时差耦合作用的斜坡崩滑效应研究

China locates between the circum-Pacific and the Mediterranean-Himalayan seismic belt. The seismic activities in our country are very frequent and so are the collapses and slides of slope triggered by earthquakes. Many collapses and slides of slope take place mainly in the west of China with many earthquakes and mountains, especially in Sichuan and Yunnan Provinces. When a strong earthquake happening, the damage especially in mountains area caused by geological hazards it triggered such as rock collapses, landslides and debris flows is heavier than that it caused directly. A conclusion which the number of lives lost caused by geological hazards triggered by a strong earthquake in mountains area often accounts for a half even more of the total one induced by the strong earthquake can be made by consulting the statistical loss of several representative earthquakes. As a result, geological hazards such as collapses and slides of slope triggered by strong earthquakes attract wide attention for their great costs. Based on field geological investigation, engineering geological exploration and material data analysis, chief conclusions have been drawn after systematic research on formation mechanism, key inducing factors, dynamic characteristics of geological hazards such as collapses and slides of slope triggered by strong earthquakes by means of engineering geomechanics comprehensive analysis, finite difference numerical simulation test, in-lab dynamic triaxial shear test of rock, discrete element numerical simulation. Based on research on a great number of collapses and landslides triggered by Wenchuan and Xiaonanhai Earthquake, two-set methods, i.e. the method for original topography recovering based on factors such as lithology and elevation comparing and the method for reconstructing collapsing and sliding process of slope based on characteristics of seism tectonic zone, structural fissure, diameter spatial distribution of slope debris mass, propagation direction and mechanical property of seismic wave, have been gotten. What is more, types, formation mechanism and dynamic characteristics of collapses and slides of slope induced by strong earthquakes are discussed comprehensively. Firstly, collapsed and slided accumulative mass is in a state of heavily even more broken. Secondly, dynamic process of slope collapsing and sliding consists of almost four stages, i.e. broken, thrown, crushed and river blocked. Thirdly, classified according to failure forms, there are usually four types which are made up of collapsing, land sliding, land sliding-debris flowing and vibrating liquefaction. Finally, as for key inducing factors in slope collapsing and sliding, they often include characteristics of seism tectonic belts, structure and construction of rock mass, terrain and physiognomy, weathering degree of rock mass and mechanical functions of seismic waves. Based on microscopic study on initial fracturing of slope caused by seismic effect, combined with two change trends which include ratio of vertical vs. horizontal peak ground acceleration corresponding to epicentral distance and enlarging effect of peak ground acceleration along slope, key inducing factor of initial slope fracturing in various area with different epicentral distance is obtained. In near-field area, i.e. epicentral distance being less than 30 km, tensile strength of rock mass is a key intrinsic factor inducing initial fracturing of slope undergoing seismic effect whereas shear strength of rock mass is the one when epicentral distance is more than 30 km. In the latter circumstance, research by means of finite difference numerical simulation test and in-lab dynamic triaxial shear test of rock shows that initial fracture begins always in the place of slope shoulder. The fact that fracture strain and shear strength which are proportional to buried depth of rock mass in the place of slope shoulder are less than other place and peak ground acceleration is enlarged in the place causes prior failure at slope shoulder. Key extrinsic factors inducing dynamic fracture of slope at different distances to epicenter have been obtained through discrete element numerical simulation on the total process of collapsing and sliding of slope triggered by Wenchuan Earthquake. Research shows that combined action of P and S seismic waves is the key factor inducing collapsing and sliding of slope at a distance less than 64 km to initial epicenter along earthquake-triggering structure. What is more, vertical tensile action of P seismic wave plays a leading role near epicenter, whereas vertical shear action of S seismic wave plays a leading role gradually with epicentral distance increasing in this range. On the other hand, single action of P seismic wave becomes the key factor inducing collapsing and sliding of slope at a distance between 64 km and 216 km to initial epicenter. Horizontal tensile action of P seismic wave becomes the key factor gradually from combined action between vertical and horizontal tensile action of P seismic wave with epicentral distance increasing in this distance range. In addition, initial failure triggered by strong earthquakes begins almost in the place of slope shoulder. However, initial failure beginning from toe of slope relates probably with gradient and rock occurrence. Finally, starting time of initial failure in slope increases usually with epicentral distance. It is perhaps that the starting time increasing is a result of attenuating of seismic wave from epicenter along earthquake-triggering structure. It is of great theoretical and practical significance for us to construct towns and infrastructure in fragile geological environment along seism tectonic belts and conduct risk management on earthquake-triggered geological hazards by referring to above conclusions.

乡镇级人口统计数据空间化研究

Population data which collected and saved according to administrative region is a kind of statistical data. As a traditional method of spatial data expression, average distribution in every administrative region brings population data on a low spatial and temporal precision. Now, an accurate population data with high spatial resolution is becoming more and more important in regional planning, environment protection, policy making and rural-urban development. Spatial distribution of population data is becoming more important in GIS study area. In this article, the author reviewed the progress of research on spatial distribution of population. Under the support of GIS, correlative geographical theories and Grid data model, Remote Sensing data, terrain data, traffic data, river data, resident data, and social economic statistic were applied to calculate the spatial distribution of population in Fujian province, which includes following parts: (1) Simulating of boundary at township level. Based on access cost index, land use data, traffic data, river data, DEM, and correlative social economic statistic data, the access cost surface in study area was constructed. Supported by the lowest cost path query and weighted Voronoi diagram, DVT model (Demarcation of Villages and Towns) was established to simulate the boundary at township level in Fujian province. (2) Modeling of population spatial distribution. Based on the knowledge in geography, seven impact factors, such as land use, altitude, slope, residential area, railway, road, and river were chosen as the parameters in this study. Under the support of GIS, the relations of population distribution to these impact factors were analyzed quantificationally, and the coefficients of population density on pixel scale were calculated. Last, the model of population spatial distribution at township level was established through multiplicative fusion of population density coefficients and simulated boundary of towns. (3) Error test and analysis of population spatial distribution base on modeling. The author not only analyzed the numerical character of modeling error, but also its spatial distribution. The reasons of error were discussed.

农村留守儿童心理行为现状及其影响因素研究

To investigate the psychological and behavioral status and their influencing factors of children left behind in rural areas in China, 604 students were chosen from primary fifth grade, junior second grade and senior first grade in high schools in local villages and towns of Chongqing and Guizhou to complete some investegations. The results showed that children left behind actually had some internalizing problems including depression, state-trait anxiety, social anxiety, low self-esteem and some social problems in campus; however, they had no delinquency or aggression behaviors. Low parents’ educational level, low life standards, no-good parent-child relationship, the long years parent spent outside, the long time parent spent outside every year, the young age of child when his parent left him, the low contact frequency between parent and child when parent went out for work, all can be the influencing factors made child behave some psychological or behavioral problems. Children left behind need some appropriate psychological intervention, to improve parent-child relationship, to help release internalizing problems and amend interpersonal relationship at school. Several advices may be useful to improve psychological and behavioral problems of children left behind, which are for parents who work outside home not to work long to 10 years, or stay out for work more than 10 months per year, or left child to work when he is younger than two years old, or contact child more than one month after the last contact when work outside home, and you’d better contact child once a day. All of these could be helpful for children left behind to overcome some psychological or behavioral problems.

Training for professional librarians in Slovakia by distance-learning methods: an overview of the PROLIB and EDULIB projects

Tedd, L.A., Dahl, K., Francis, S.,Tet?evov?, M.& ?ihlavn?kov?, E.(2002).Training for professional librarians in Slovakia by distance-learning methods: an overview of the PROLIB and EDULIB projects. Library Hi Tech, 20(3), 340-351. Sponsorship: European Union and the Open Society Institute

The role of late medieval English monasteries as expressions of patronal authority : Some case studies

St?ber, Karen. 'The role of late medieval English monasteries as expressions of patronal authority: some case studies', in: 'The Use and Abuse of Sacred Places in Late Medieval Towns, Medievalia Lovaniensia, Series I, Studia XXXVIII', (Leuven: Leuven University Press), pp.189-207, 2006 RAE2008

Podstawy ekonomiczne powstawania średniowiecznych ośrodków miejskich na Pomorzu w świetle badań archeologicznych

Wydział Historyczny: Instytut Prahistorii

Transformation from natural (thermal contraction) to anthropogenic (resource exploitation) depressions in the Krotoszyn-Koźmin-Raszków area (Polish Lowland)

An exceptional concentration of almost identical depressions exist near the small towns of Krotoszyn, Koźmin and Raszków (southern Wielkopolska). Their origin is, however, different from that of the typical post glacial-relief: they are Man-made enlarged thermal-contraction structures that developed at the very end of the Middle Polish (Warthian) glaciation and during the North Polish (Weichselian) glaciation, most probably under periglacial conditions.

Polskie tradycje muzyczne na południowo-wschodniej Syberii i ich rola w kształtowaniu tożsamości narodowo-etnicznej

Wydział Historyczny: Katedra Muzykologii

The Retail Market for Bednets in Kenya: How Well Is It Working?

Background Achieving the goals set by Roll Back Malaria and the Government of Kenya for use of insecticide treated bednets (ITNs) will require that the private retail market for nets and insecticide treatments grow substantially. This paper applies some basic concepts of market structure and pricing to a set of recently-collected retail price data from Kenya in order to answer the question, “How well are Kenyan retail markets for ITNs working?” Methods Data on the availability and prices of ITNs at a wide range of retail outlets throughout Kenya were collected in January 2002, and vendors and manufacturers were interviewed regarding market structure. Findings Untreated nets are manufactured in Kenya by a number of companies and are widely available in large and medium-sized towns. Availability in smaller villages is limited. There is relatively little geographic price variation, and nets can be found at competitive prices in towns and cities. Marketing margins on prices appear to be within normal ranges. No finished nets are imported. Few pre-treated nets or net+treatment combinations are available, with the exception of the subsidized Supanet/Power Tab combination marketed by a donor-funded social marketing project. Conclusions Retail markets for untreated nets in Kenya are well established and appear to be competitive. Markets for treated nets and insecticide treatment kits are not well established. The role of subsidized ITN marketing projects should be monitored to ensure that these projects support, rather than hinder, the development of retail markets.

Structural carpentry in medieval Ireland: continuity and change

The study of medieval carpentry is probably one of the most neglected aspects of archaeological research in Ireland. The principal difficulty is the nature of the evidence, in that timber, unless the conditions are right, rarely leaves a trace above ground. The problem is further exacerbated by the fact that not a single medieval timber-framed building has survived in Ireland. Nevertheless, in recent years, in addition to the medieval roof of Dunsoghley, which up to quite recently was thought to be the only surviving roof structure in Ireland, a further eight medieval roof structures have been identified. Furthermore, an extensive corpus of early medieval mills, with evidence for advanced Roman carpentry techniques, has been excavated, while evidence for Viking houses, on what is probably the largest extant Viking settlement in Europe, have also been recovered. Although post and wattle structures dominate the archaeological record of the Viking period, nevertheless, it will be shown that the Roman tradition of carpentry, evidenced in the early medieval mills from the early seventh century, continued in use in the wider Gaelic community. And it is one of the pivotal points of this study, that with the takeover of Dublin by the Gaelic Irish in the late tenth century, this Roman carpentry tradition was gradually assimilated into the carpentry tradition of the Viking towns, which were now largely inhabited by a mixed population of Hiberno-Norse. Evidence for this Gaelic influence can be seen not only in the gradual replacement of the Viking post and wattle house by timber houses with load-bearing walls, but more importantly by the evidence for waterfront structures founded on baseplates with mortise and tenoned uprights on the pre-Norman waterfront in Cork. Furthermore, it will be shown, that the carpentry techniques used to build the Wood Quay revetments, shortly after the Anglo-Norman conquest in AD 1170, supports this contention.

Ironworking in late medieval Ireland, c. AD. 1200 to 1600

The landscape of late medieval Ireland, like most places in Europe, was characterized by intensified agricultural exploitation, the growth and founding of towns and cities and the construction of large stone edifices, such as castles and monasteries. None of these could have taken place without iron. Axes were needed for clearing woodland, ploughs for turning the soil, saws for wooden buildings and hammers and chisels for the stone ones, all of which could not realistically have been made from any other material. The many battles, waged with ever increasingly sophisticated weaponry, needed a steady supply of iron and steel. During the same period, the European iron industry itself underwent its most fundamental transformation since its inception; at the beginning of the period it was almost exclusively based on small furnaces producing solid blooms and by the turn of the seventeenth century it was largely based on liquid-iron production in blast-furnaces the size of a house. One of the great advantages of studying the archaeology of ironworking is that its main residue, slag, is often produced in copious amounts both during smelting and smithing, is virtually indestructible and has very little secondary use. This means that most sites where ironworking was carried out are readily recognizable as such by the occurrence of this slag. Moreover, visual examination can distinguish between various types of slag, which are often characteristic for the activity from which they derive. The ubiquity of ironworking in the period under study further means that we have large amounts of residues available for study, allowing us to distinguish patterns both inside assemblages and between sites. Disadvantages of the nature of the remains related to ironworking include the poor preservation of the installations used, especially the furnaces, which were often built out of clay and located above ground. Added to this are the many parameters contributing to the formation of the above-mentioned slag, making its composition difficult to connect to a certain technology or activity. Ironworking technology in late medieval Ireland has thus far not been studied in detail. Much of the archaeological literature on the subject is still tainted by the erroneous attribution of the main type of slag, bun-shaped cakes, to smelting activities. The large-scale infrastructure works of the first decade of the twenty-first century have led to an exponential increase in the amount of sites available for study. At the same time, much of the material related to metalworking recovered during these boom-years was subjected to specialist analysis. This has led to a near-complete overhaul of our knowledge of early ironworking in Ireland. Although many of these new insights are quickly seeping into the general literature, no concise overviews on the current understanding of the early Irish ironworking technology have been published to date. The above then presented a unique opportunity to apply these new insights to the extensive body of archaeological data we now possess. The resulting archaeological information was supplemented with, and compared to, that contained in the historical sources relating to Ireland for the same period. This added insights into aspects of the industry often difficult to grasp solely through the archaeological sources, such as the people involved and the trade in iron. Additionally, overviews on several other topics, such as a new distribution map of Irish iron ores and a first analysis of the information on iron smelting and smithing in late medieval western Europe, were compiled to allow this new knowledge on late medieval Irish ironworking to be put into a wider context. Contrary to current views, it appears that it is not smelting technology which differentiates Irish ironworking from the rest of Europe in the late medieval period, but its smithing technology and organisation. The Irish iron-smelting furnaces are generally of the slag-tapping variety, like their other European counterparts. Smithing, on the other hand, is carried out at ground-level until at least the sixteenth century in Ireland, whereas waist-level hearths become the norm further afield from the fourteenth century onwards. Ceramic tuyeres continue to be used as bellows protectors, whereas these are unknown elsewhere on the continent. Moreover, the lack of market centres at different times in late medieval Ireland, led to the appearance of isolated rural forges, a type of site unencountered in other European countries during that period. When these market centres are present, they appear to be the settings where bloom smithing is carried out. In summary, the research below not only offered us the opportunity to give late medieval ironworking the place it deserves in the broader knowledge of Ireland's past, but it also provided both a base for future research within the discipline, as well as a research model applicable to different time periods, geographical areas and, perhaps, different industries..