Monitoramento da condição da ferramenta de dressagem usando sinais de vibração e modelos neurais

Pós-graduação em Engenharia Elétrica - FEB

Estudo de tempos e temperaturas de sinterização na obtenção da liga NiTi por metalurgia do pó

The nickel-titanium alloys are very attractive and so it is widely used in industry, engineering applications in general and also in biomedical and dental applications. Besides showing the shape of memory effect, biocompatibility and superelastic, the alloy commercially known as Nitinol, has excellent mechanical properties. Most devices used in Brazil have been produced nationally, but using imported material is also necessary, which shows the need of produce the alloy nationally. In this study we have investigated the influence of sintering temperatures and times to obtain nickel-titanium alloys by powder metallurgy alloys and the characterization of the precipitated intermetallic phases by using the post-mix of elemental nickel and titanium in proportion of 49.5% Ti - 50.5% Ni. The samples were sintered at 930ºC for periods of 30, 40 and 50 hours and were characterized by optical microscopy using metallography and x-ray diffraction. The results of the study show that the 50 hours sintering time was the most suitable time for obtaining the alloy, observing a low volume of precipitated intermetallic phases and absence of Ni and Ti residuals

Produção e caracterização das Tanases do fungo filamentoso Aspergillus carbonarius

Pós-graduação em Biotecnologia - IQ

Utilização de lama vermelha para oxidação eletrolítica assistida por plasma de liga de alumínio

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise do pré-mix de breu esterificado e policloreto de alumínio como agente de colagem interna em sistemas alcalinos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Study of the feasibility of mix of species from sawmill waste and limiting for particleboard

This study aims to determine physical properties of particleboard made of sawmill waste, as a mix of several wood species, and two adhesives: urea-formaldehyde, usually employed in industry (even with drawbacks or formaldehyde emission during pressing) and FASTBOND®, water based resin, still poorly referenced in literature. Sixteen panels have been produced, in four experimental conditions, defined by using two adhesives and a 12 mm thick limiter (or not). Variance analysis was adopted to evaluate influence of experimental conditions on physical properties of produced panels, manufactured in nominal dimensions 350x350mm; 10% resin related to particles mass (at 5% moisture); 3.5 MPa compaction pressure, temperature 130°C, in a 10 min cycle. Tests to determine density, moisture content, swelling and water absorption were carried out based on normative parameters of ABNT NBR 14810:2006. Results have been satisfactory to panels produced with urea-formaldehyde but those manufactured with polychloroprene based resin (FASTBOND®) not meet regulatory requirements. Best results have been obtained without limiter.

Flutter analysis including structural uncertainties

The common practice in industry is to perform flutter analyses considering the generalized stiffness and mass matrices obtained from finite element method (FEM) and aerodynamic generalized force matrices obtained from a panel method, as the doublet lattice method. These analyses are often reperformed if significant differences are found in structural frequencies and damping ratios determined from ground vibration tests compared to FEM. This unavoidable rework can result in a lengthy and costly process of analysis during the aircraft development. In this context, this paper presents an approach to perform flutter analysis including uncertainties in natural frequencies and damping ratios. The main goal is to assure the nominal system’s stability considering these modal parameters varying in a limited range. The aeroelastic system is written as an affine parameter model and the robust stability is verified solving a Lyapunov function through linear matrix inequalities and convex optimization

Fungos endofíticos: prospecção de atividade biocatalítica e aplicação biotecnológica

Pós-graduação em Biotecnologia - IQ

Influência do aporte térmico da soldagem GTAW no balanço de fases Ferrita/Austenita do Aço Inoxidável Duplex UNS S32205

Pós-graduação em Engenharia Mecânica - FEIS

Freio eletrodinamométrico usando um inversor de frequência e um motor de indução trifásico

Considering that the Brazilian energy source is based on hydroelectric power plants, every moment that it does not rain enough, we are likely to suffer power outage. Making the rational use of energy not only is wise, but also important for financial issues. The industrial sector is of great importance to Brazilian economic context, because it is one that creates more wealth and jobs. It should be noted that it is one of the sectors that consume more electricity. One of the most used equipment in industry is the three phase induction motor, which ends up providing significant waste of energy. For that reasons, studying three phase induction motors is important. One of the ways to evaluate the parameter of the three phase induction motor is using a dynamometer mechanic or electric. This work aims at further studies (and development) of electrodynamometer brake, a type of electrical dynamometer, that is the only one with reversible use. This means, it is possible to measure both the torque and the power transmitted by the electric motors, by the direct method and the indirect. Besides it allows greater stability in the imposition of charges, due to its nature of being able to regenerate the energy imparted by the engines being tested

Freio eletrodinamométrico usando um inversor de frequência e um motor de indução trifásico

Considering that the Brazilian energy source is based on hydroelectric power plants, every moment that it does not rain enough, we are likely to suffer power outage. Making the rational use of energy not only is wise, but also important for financial issues. The industrial sector is of great importance to Brazilian economic context, because it is one that creates more wealth and jobs. It should be noted that it is one of the sectors that consume more electricity. One of the most used equipment in industry is the three phase induction motor, which ends up providing significant waste of energy. For that reasons, studying three phase induction motors is important. One of the ways to evaluate the parameter of the three phase induction motor is using a dynamometer mechanic or electric. This work aims at further studies (and development) of electrodynamometer brake, a type of electrical dynamometer, that is the only one with reversible use. This means, it is possible to measure both the torque and the power transmitted by the electric motors, by the direct method and the indirect. Besides it allows greater stability in the imposition of charges, due to its nature of being able to regenerate the energy imparted by the engines being tested

Semantic information extraction from images of complex documents

Even though the digital processing of documents is increasingly widespread in industry, printed documents are still largely in use. In order to process electronically the contents of printed documents, information must be extracted from digital images of documents. When dealing with complex documents, in which the contents of different regions and fields can be highly heterogeneous with respect to layout, printing quality and the utilization of fonts and typing standards, the reconstruction of the contents of documents from digital images can be a difficult problem. In the present article we present an efficient solution for this problem, in which the semantic contents of fields in a complex document are extracted from a digital image.

Insights into Phosphate Cooperativity and Influence of Substrate Modifications on Binding and Catalysis of Hexameric Purine Nucleoside Phosphorylases

The hexameric purine nucleoside phosphorylase from Bacillus subtilis (BsPNP233) displays great potential to produce nucleoside analogues in industry and can be exploited in the development of new anti-tumor gene therapies. In order to provide structural basis for enzyme and substrates rational optimization, aiming at those applications, the present work shows a thorough and detailed structural description of the binding mode of substrates and nucleoside analogues to the active site of the hexameric BsPNP233. Here we report the crystal structure of BsPNP233 in the apo form and in complex with 11 ligands, including clinically relevant compounds. The crystal structure of six ligands (adenine, 2'deoxyguanosine, aciclovir, ganciclovir, 8-bromoguanosine, 6-chloroguanosine) in complex with a hexameric PNP are presented for the first time. Our data showed that free bases adopt alternative conformations in the BsPNP233 active site and indicated that binding of the co-substrate (2'deoxy) ribose 1-phosphate might contribute for stabilizing the bases in a favorable orientation for catalysis. The BsPNP233-adenosine complex revealed that a hydrogen bond between the 5' hydroxyl group of adenosine and Arg(43*) side chain contributes for the ribosyl radical to adopt an unusual C3'-endo conformation. The structures with 6-chloroguanosine and 8-bromoguanosine pointed out that the Cl-6 and Br-8 substrate modifications seem to be detrimental for catalysis and can be explored in the design of inhibitors for hexameric PNPs from pathogens. Our data also corroborated the competitive inhibition mechanism of hexameric PNPs by tubercidin and suggested that the acyclic nucleoside ganciclovir is a better inhibitor for hexameric PNPs than aciclovir. Furthermore, comparative structural analyses indicated that the replacement of Ser(90) by a threonine in the B. cereus hexameric adenosine phosphorylase (Thr(91)) is responsible for the lack of negative cooperativity of phosphate binding in this enzyme.

Fatores críticos de sucesso em projetos colaborativos na indústria de máquinas agrícolas

Os projetos colaborativos de novos produtos são fundamentais para que empresas aumentem o grau de inovação em seus produtos. Bons resultados dependem da identificação de fatores críticos de sucesso (FCS) e não há tais estudos na Indústria de Máquinas Agrícolas (IMA). O artigo verifica se os FCS identificados na literatura poderiam ser utilizados em levantamentos do setor e se há outros a considerar. Apresenta revisão bibliográfica e levantamento em empresa com elevado nível de maturidade em PDP frente às empresas da IMA. Empregou-se o método de estudo de caso único, do tipo incorporado. A unidade de análise são projetos do tipo colaborativo e de sucesso: dois deles no total. Identificam-se fatores que podem não ser críticos, apesar de apontados pela literatura; indica-se a existência de novos FCS e reforça-se a importância dos fatores ligados à garantia de igualdade e fatores universais de sucesso.

Facets of Gender : Analyses of the Family and the Labour Market

This thesis contains four different studies on the dynamics of gender in households and workplaces. The relationship between family life and work life is in focus, particularly in the paper on labour market outcomes after divorce. In the introductory chapter, the Swedish context is briefly described. The description focuses on gender differences in the labour market and in the home. Theories concerning the division of work in the household are discussed, as are two theories on labour market discrimination, viz. taste discrimination and statistical discrimination. The theory part is concluded with a discussion of social closure processes and gendered organizational structures. The Reproduction of Gender. Housework and Attitudes Towards Gender Equality in the Home Among Swedish Boys and Girls. The housework boys and girls age 10 to 18 do, and their attitudes towards gender equality in the home are studied. One aim is to see whether the work children do is gendered and if so, whether they follow their parents’, often gendered, pattern in housework. A second aim is to see whether parents’ division of work is related to the children’s attitude towards gender equality in the home. The data used are taken from the Swedish Child Level of Living Survey (Child-LNU) 2000. Results indicate that girls and boys in two-parent families are more prone to engage in gender-atypical work the more their parent of the same sex engages in this kind of work. The fact that girls still do more housework than boys indicates that housework is gendered work also among children. No relation between parents’ division of work and the child’s attitude towards gender equality in the home was found. Dependence within Families and the Household Division of Labor – A Comparison between Sweden and the United States. This paper assesses the relative explanatory value of the resource-bargaining perspective and the doing-gender approach in analysing the division of housework in the United States and Sweden from the mid-1970s to 2000. Data from the Swedish Level of Living Survey (LNU) and the Panel Study of Income Dynamics (PSID) were used. Overall results indicate that housework is truly gendered work in both countries during the entire period. Even so, the results also indicate that gender deviance neutralization is more pronounced in the United States than in Sweden. Unlike Swedish women, American women seem to increase their time spent in housework when their husbands are to some extent economically dependent on them, as if to neutralize the presumed gender deviance. Divorce and Labour Market Outcomes. Do Women Suffer or Gain? In this paper, the interconnected nature of work and family is studied by looking at labour market outcomes after divorce. The data used are retrospective work and family histories collected in LNU 1991. A hazard regression model with competing risks reveals that women’s chances of improving their occupational prestige appear to be better after divorce compared to before. Increased working hours and perhaps also increased energy invested in the job may pay off in better occupational opportunities. Worth noting, however, is that the outcome among women with a less firm labour market attachment is more often to a job of lower prestige than one of higher prestige. Hence, the labour market outcome for women after divorce is to some extent conditioned by their labour market attachment at the time of divorce. Men, on the other hand, in most cases seem to suffer occupationally from divorce. For separated men the risk of negative changes in occupational prestige is greater than for cohabiting men. Formal On-the-job Training. A Gender-Typed Experience and Wage- Related Advantage? Formal on-the-job training (FOJT) can have a positive impact on wages and on promotion opportunities. According to theory and earlier research, a two-step model of gender inequality in FOJT is predicted: First, women are less likely than men to take part in FOJT and, second, once women do get the more remunerative training, they are not rewarded for their new skills to the same extent as men are. Pooled cross-sectional data from the Swedish Survey of Living Conditions (ULF) in the mid-nineties were used. Results show that women are significantly less likely than men to take part in FOJT. Among those who do receive training, women are more likely to take part in industry-specific training, whereas men are more likely to participate in general training and training that increases promotion opportunities. The two latter forms of training significantly raise a man’s annual earnings but not a woman’s. Hence, the theoretical model is supported and it is argued that this gender inequality is partly due to employers’ discriminatory practices.