Population structure of Eschweilera coriacea (DC.) S. A. Mori in forest fragments in eastern Brazilian Amazonia

The population structure of a common canopy tree was examined in three sites to investigate the possible effects of forest fragmentation in eastern Amazonia. Evidence for the escape hypothesis of differential seed/seedling survival was evaluated. Two 1 ha plots were established at each site and all individuals of Eschweilera coriacea (DC.) S. A. Mori over 1 m tall were tagged, measured and mapped. Smaller individuals were recorded in the same way within subplots. Mature individuals were abundant at all sites with densities of 32-52 ha-1. The species exhibited substantial regeneration, although total population density varied fourfold among sites (1,256-4,805 individuals ha-1). Overall, juveniles were clumped while adults were randomly distributed. The difference between the dispersion pattern of adults and juveniles supported the escape hypothesis. However, no difference in population structure among sites could be related to the forest fragmentation.

Spatial variation in the structure and floristic composition of "restinga" vegetation in southeastern Brazil

We examined large-scale spatial variation of structural parameters and floristic composition in open Clusia scrub, a vegetation type of the Brazilian "restingas" (sandy coastal plain vegetation). This vegetation is organized in islands separated by sandy stretches with sparse herbaceous vegetation. We located 12 sample areas on three consecutive beach ridges, lying parallel to the coastline and at different distances from the ocean, in close proximity to two lagoons (Cabiúnas and Comprida). Each sample area was divided into three strips. We used the line intercept method to sample all woody plants ³ 50 cm tall. We used nested ANOVA to verify structural variation between different sampling scales. TWINSPAN analysis was performed to examine the variation in floristic composition between areas. The overall diversity index was 3.07. Six species are repeatedly dominant throughout the entire sampling area. There was homogeneity in relation to diversity and species richness between beach ridges but not within beach ridges. Floristic composition and structural parameters did not vary in relation to distance from the sea but floristic composition did vary as a function of proximity to Cabiúnas or Comprida lagoon. Differences in plant cover between sample areas may be related to the paleoformation of this sandy coastal plain.

Deoxygenation of fatty acids for production of fuels and chemicals

The decreasing fossil fuel resources combined with an increasing world energy demand has raised an interest in renewable energy sources. The alternatives can be solar, wind and geothermal energies, but only biomass can be a substitute for the carbon–based feedstock, which is suitable for the production of transportation fuels and chemicals. However, a high oxygen content of the biomass creates challenges for the future chemical industry, forcing the development of new processes which allow a complete or selective oxygen removal without any significant carbon loss. Therefore, understanding and optimization of biomass deoxygenation processes are crucial for the future bio–based chemical industry. In this work, deoxygenation of fatty acids and their derivatives was studied over Pd/C and TiO2 supported noble metal catalysts (Pt, Pt–Re, Re and Ru) to obtain future fuel components. The 5 % Pd/C catalyst was investigated in semibatch and fixed bed reactors at 300 °C and 1.7–2 MPa of inert and hydrogen–containing atmospheres. Based on extensive kinetic studies, plausible reaction mechanisms and pathways were proposed. The influence of the unsaturation in the deoxygenation of model compounds and industrial feedstock – tall oil fatty acids – over a Pd/C catalyst was demonstrated. The optimization of the reaction conditions suppressed the formation of by–products, hence high yields and selectivities towards linear hydrocarbons and catalyst stability were achieved. Experiments in a fixed bed reactor filled with a 2 % Pd/C catalyst were performed with stearic acid as a model compound at different hydrogen–containing gas atmospheres to understand the catalyst stability under various conditions. Moreover, prolonged experiments were carried out with concentrated model compounds to reveal the catalyst deactivation. New materials were proposed for the selective deoxygenation process at lower temperatures (~200 °C) with a tunable selectivity to hydrodeoxygenation by using 4 % Pt/TiO2 or decarboxylation/decarbonylation over 4 % Ru/TiO2 catalysts. A new method for selective hydrogenation of fatty acids to fatty alcohols was demonstrated with a 4 % Re/TiO2 catalyst. A reaction pathway and mechanism for TiO2 supported metal catalysts was proposed and an optimization of the process conditions led to an increase in the formation of the desired products.

Sellutehtaan TRS-hajapäästöjen hallinta

Diplomityön tavoitteena on selvittää TRS-hajapäästöjen muodostumista sekä päästöjen määrää UPM Kymmene Oyj:n Kaukaan sellu- ja paperitehtaalla. Työssä laaditaan TRS-hajapäästöjen mittausohjelma, minkä päivitetty massa- ja paperiteollisuuden BAT-vertailuasiakirja vaatii. Mittausohjelma täydentää tehdasintegraatin ilmapäästöjen valvontaohjelmaa. Hajapäästöjen lisäksi tavoitteena on selvittää häiriötilanteiden aiheuttamia TRS-päästömääriä. Kirjallisuusosassa selvitetään hajujen muodostumista sellun ja paperin valmistuksessa ja niiden käsittelyä ympäristövaikutusten minimoimiseksi. Lisäksi esitellään mittausmenetelmiä. Kokeellisessa osassa valituista kohteista mitataan TRS-pitoisuudet ja hajukaasujen virtaama, joiden perusteella lasketaan TRS-kuormitus. Kuormitus suhteutetaan sellutonnille. Osa kohteista on hajapäästökohteita ja osa kohteita, joista hajukaasut häiriötilanteissa johdetaan käsittelemättä ulos. Tulosten perusteella TRS-hajapäästöjä muodostuu sellun valmistuksessa noin 0,04 kgS/ADt ja jätevedenkäsittelyssä, pääasiassa lietteenkäsittelyssä 0,04 kgS/ADt. Hajapäästöjä syntyy eniten kohteissa, missä keräily on toteutettu kevyemmin tai sitä ei ole. Merkittävimmät kohteet Kaukaalla ovat lietteenkäsittely, koivukuitulinja ja mäntyöljylaitos. Havulinjan ja talteenotto-osaston hajapäästöt ovat muita osastoja vähäisemmät. Yhteensä sellutehtaan ja lietteenkäsittelyn TRS-hajapäästömäärä on 0,08 kgS/ADt, mikä on BAT vaihteluvälin (0,05-0,2 kgS/ADt) sisällä. TRS-häiriöpäästöjen osuus tehtaan TRS päästöistä voi häiriötilanteiden toistuessa nousta merkittäviksi. Tähän vaikuttaa merkittävästi häiriintyvä kohde.

Identification of a protein kinase activity that phosphorylates connexin43 in a pH-dependent manner

The carboxyl-terminal (CT) domain of connexin43 (Cx43) has been implicated in both hormonal and pH-dependent gating of the gap junction channel. An in vitro assay was utilized to determine whether the acidification of cell extracts results in the activation of a protein kinase that can phosphorylate the CT domain. A glutathione S-transferase (GST)-fusion protein was bound to Sephadex beads and used as a target for protein kinase phosphorylation. A protein extract produced from sheep heart was allowed to bind to the fusion protein-coated beads. The bound proteins were washed and then incubated with 32P-ATP. Phosphorylation was assessed after the proteins were resolved by SDS-PAGE. Incubation at pH 7.5 resulted in a minimal amount of phosphorylation while incubation at pH 6.5 resulted in significant phosphorylation reaction. Maximal activity was achieved when both the binding and kinase reactions were performed at pH 6.5. The protein kinase activity was stronger when the incubations were performed with manganese rather than magnesium. Mutants of Cx43 which lack the serines between amino acids 364-374 could not be phosphorylated in the in vitro kinase reaction, indicating that this is a likely target of this reaction. These results indicate that there is a protein kinase activity in cells that becomes more active at lower pH and can phosphorylate Cx43.

Selvitys erilaisten mäntyöljynkeittoprosessien toiminnasta

Työn tavoitteena oli tutustua eri mäntyöljyprosessien toimintaan. Sulfaattisellun valmistuksessa syntyy sivutuotteena mäntyöljyä. Se tuo lisätuottoa sellutehtaalle. Nykypäivänä mäntyöljyn valmistukseen on kiinnitetty yhä enemmän huomiota uusien jalostusmahdollisuuksien vuoksi. Mäntyöljyä syntyy, kun mustalipeän pinnalta kuorittu suopa palstoitetaan sopivalla hapolla. Suopa koostuu puun uuteaineista eli hartsi- ja rasvahapoista sekä saippuattomista aineista. Suopa pitää erottaa mustalipeästä mahdollisimman hyvin, jotta se ei aiheuttaisi ongelmia sellutehtaan eri prosessin vaiheissa. Suopaa voidaan erottaa mustalipeästä säiliöerotuksena, sentrifugeilla tai hydrosykloneilla. Suovan palstoitusprosessi voi olla erä- tai jatkuvatoiminen prosessi. Jatkuvatoimisia prosesseja ovat: sentrifugi-, säiliödekantointi- ja HDS-prosessi. Mäntyöljyä voidaan käyttää kemianteollisuuden raaka-aineena tai siitä voidaan jalostaa biodieseliä. Tämä biodiesel on niin sanottua toisen polven biopolttoainetta eli se ei sisällä ravinnoksi kelpaavaa raaka-ainetta. Nykypäivänä markkinoilla on sekä eräkeitto- sekä jatkuvatoimisia prosesseja. Suovan erotussäiliöiden rinnalle on tullut uusi sentrifugeilla tapahtuva suovan erotussysteemi.

Avaliação do potencial fisiológica de sementes de beterraba

As informações disponíveis na literatura nacional sobre a avaliação do vigor de sementes de beterraba são escassas, embora essa cultura seja de grande importância. O objetivo do trabalho foi definir metodologia para avaliar o potencial fisiológico das sementes, comparando resultados obtidos em laboratório com a emergência de plântulas em campo. Sementes de beterraba, cultivar Top Tall Early Wonder, representadas por cinco lotes adquiridos no comércio, foram avaliadas quanto à viabilidade (teste de germinação) e ao vigor (testes de primeira contagem, velocidade de germinação, envelhecimento acelerado tradicional e com solução saturada de NaCl e emergência de plântulas em campo). O teste de envelhecimento acelerado com solução salina saturada manteve baixo o teor de água e não reduziu a intensidade de deterioração das sementes. Os testes de envelhecimento acelerado tradicional e com solução de NaCl, ambos a 42ºC, mostraram-se adequados para identificar diferenças no potencial fisiológico de sementes de beterraba.

Deterioração controlada em sementes de beterraba

O uso de testes de vigor é fundamental na avaliação do potencial fisiológico de sementes produzidas e comercializadas. O trabalho foi realizado com o objetivo de estudar o uso do teste de deterioração controlada na avaliação do potencial fisiológico de sementes de beterraba. Após lavagem dos frutos contendo as sementes em água corrente, oito lotes da cultivar Top Tall Early Wonder foram previamente avaliados pelos testes de germinação e de emergência de plântulas (EP). Para o ajuste do teor de água (TA) foram estudados os métodos de atmosfera úmida (AU) e substrato úmido (SU). O teste de deterioração controlada (DC) foi conduzido com 22 e 24% de água e exposição durante 12, 24 e 36 horas à temperatura de 45 ºC. Usou-se o delineamento experimental inteiramente casualizado, com oito repetições de 25 sementes, exceto o de EP, conduzido com quatro repetições de 50 sementes. Os dados foram analisados separadamente para cada combinação TA x períodos de deterioração e as médias comparadas usando-se o teste de Tukey (P<0,05). Análises de correlação simples foram estabelecidas entre os resultados dos testes de laboratório e a EP. O ajuste do TA de semente deve ser feito pelo método do SU. O teste de DC pode ser utilizado para avaliar o potencial fisiológico de sementes de beterraba, sendo indicada a combinação TA de 22%, a 45ºC, durante 24 horas.

Mäntyöljyn tislauksen esikäsittely

Raakamäntyöljy on selluteollisuuden sivutuote. Suopa erotetaan mustalipeästä ja palstoitetaan tuottaen siten raakamäntyöljyä. Raakamäntyöljy tislataan tavanomaisesti viiteen pääjakeeseen: rasvahapot, hartsihapot, mäntyöljytisle, esiöljy ja mäntyöljypiki. Näiden jakeiden lisäksi raakamäntyöljyssä on erityisesti mustalipeästä siihen erottuneita epäpuhtauksia, jotka haittaavat raakamäntyöljyn prosessointia. Epäpuhtauksia ovat orgaaniset ja epäorgaaniset yhdisteet, kuten metallit, suolat ja ligniini. Nämä epäpuhtaudet aiheuttavat haitallisia reaktioita prosessissa huonontaen siten lopputuotejakeiden laatua. Tämän lisäksi epäpuhtaudet aiheuttavat saostumia prosessilaitteissa alentaen siten prosessointitehokkuutta. Raakamäntyöljyn esikäsittelyllä tehostetaan tislauksen toimintaa. Työssä esitetään esikäsittelymenetelmistä mm. degumming-menetelmä, laimea happopesu, hiilidioksidikäsittely, valkaisu ja lämpökäsittely. Menetelmien pohjalta valitaan tätä työtä varten yksi menetelmä, jonka pohjalta suunnitellaan kokeellisessa osassa suoritettavat kokeet. Kokeellinen osuus koostuu esikokeista, varsinaisista kokeista ja lisäkokeista. Menetelmän tarkoituksena on saavuttaa epäpuhtauksille 90–95 % reduktioaste. Kokeiden onnistumista tutkitaan analysoimalla alkuperäinen raakamäntyöljy, sekä jokaisen kokeen jälkeen erotetut faasit. Työssä saavutettiin hyvä erotustehokkuus. Alkuperäisen tavoitteen mukaista reduktioastetta ei pystytty määrittämään eri analyysimenetelmien ja niiden analyysituloksissa ilmenneiden eroavaisuuksien vuoksi, mutta lisäkokeiden ansiosta pystyttiin vahvistamaan kyseisen koejärjestelmän optimaalinen poistoaste. Lisäksi työssä havaittiin että esikäsittelytulos on hyvin riippuvainen käsiteltävän raaka-aineen koostumuksesta.

Grass-endophyte coevolution and ploidy levels in fescues

ABSTRACT Fescues consist of wild and cultivated grasses that have adapted to a wide range of environmental conditions. They are an excellent model species for evolutionary ecology studies that investigate symbiosis and polyploidization and their effects on plant performance. First, they are frequently infected with symbiotic endophytic fungi known to affect a plant’s ability to cope with biotic and abiotic environmental factors. Second, fescue species have been reported to have substantial intraspecific variation in their ploidy level and morphology. In my thesis, I examined large-scale generalizations for frequency of polyploidy and endophyte infections and their effects on plant morphology. As a model species, I selected red (Festuca rubra) and viviparous sheep’s (F. vivipara) fescues. They are closely related, but they differ in terms of distribution and endophyte infection frequency. I investigated the biogeographic pattern and population biology of 29 red and 12 viviparous sheep’s fescue populations across ≈300 latitudes in Europe (400-690 N). To examine plant ploidy levels, I implemented time- and cost-efficient plate-based high throughput flow cytometric analysis. This efficient procedure enabled me to analyze over 1000 red fescue individuals. I found three ploidy levels among them: overall 84 %, 9 % and 7 % of the red fescue plants were hexaploid, tetraploid and octoploid, respectively. However, all viviparous sheep’s fescue plants were tetraploid. Ploidy level of red fescue appeared to some extent follow gradients in latitude and primary production as suggested by previous studies, but these results could be explained better by taking the sampling design and local adaptation into account. Three Spanish populations were mostly tetraploids and one high elevation population in northernmost Finland (Halti) was octoploid, while most other populations (25 sites) were dominated by hexaploids. Endophyte infection frequencies of wild fescue populations varied from 0 to 81 % in red fescue populations and from 0 to 30 % in viviparous sheep’s fescue populations. No gradients with latitude or primary production of the sites were detected. As taxonomy of red fescues is somewhat unclear, I also studied morphology, ploidy variation and endophyte status of proposed subspecies of European red fescues. Contrary to previous literature, different ploidy levels occurred in the same subspecies. In addition to wild fescues, I also used two agronomically important cultivars of meadow and tall fescue (Schedonorus phoenix and S. pratensis). As grass-legume mixtures have an agronomic advantage over monocultures in meadows, I carried out a mixture/competition experiment with fescues and red clover to find that species composition, nutrient availability and endophyte status together determined the total biomass yield that was higher in mixtures compared to monocultures. The results of this thesis demonstrate the importance of local biotic and abiotic factors such as grazing gradients and habitat types, rather than suggested general global geographical or environmental factors on grass polyploidization or its association with symbiotic endophytic fungi. I conclude that variation in endophyte infection frequencies and ploidy levels of wild fescues support the geographic mosaic theory of coevolution. Historical incidents, e.g., glaciation and present local factors, rather than ploidy or endophyte status, determine fescue morphology.

Concordia Statue

The 8-foot tall Concordia statue made of bronze was unveiled in July of 1969. It was created by Canadian sculptress Eza Mayhew and weighs over 2500 lbs. Originally commissioned for Expo 67, it was later donated to Brock by Seagram's Distilling Company. The statue was placed just southeast of the Brock Tower, and still stands there today - between the Thistle Complex, Taro Hall, and Mackenzie Chown A Block. View facing northwest.

SchmonTower and Thistle East

The Schmon Tower can be seen here behind several tall trees located on the eastern edge of the Thistle Complex. This view is taken from approximately where Taro Hall stands.

Prevalence of overweight and obesity in children from urban and rural Niagara

Purpose: The influence of environment in the development of overweight and obesity is an ongoing concern. This investigation examined the influence of urbanization on the rates of childhood overweight and obesity. Method: 2167 (1090M, 1077F) grade four children from 75 schools in Ontario's Niagara Region were sampled. A sophisticated algorithm overlaying electoral boundaries, population densities, and the knowledge of community members was used to classify schools into one of three location categories: urban {N= 1588), urban fringe {N= 379), and rural (A^= 234). Each subject was measured for: height, weight, and aerobic performance (Leger). Physical activity was evaluated with the self-report Participation Questionnaire (free-time and organized sport activities), and teacher's evaluations of student activity. Overweight (overweight and obesity combined) was measured both as a continuous (BMI) and categorical variable (BMI category), to evaluate the prevalence by location. A multivariate analysis was used to test for a suppression effect. Results: BMI and BMI category did not differ significantly by location or gender, and no evidence of a gender interaction existed. According to both a linear and logistic regression, physical activity or fitness levels did not suppress the influence of location on BMI and BMI category. Age, gender, free-time activity, organized sports, fitness level, and number of siblings, were all found to significantly influence overweight. Conclusions: It is plausible that the prevalence of overweight does not differ in urban and rural children from the Niagara Region. Further investigation is recommended, examining subjects by individual location of residence, in multiple regions throughout Ontario.

Acquisition and transfer of experiential learning from rock climbing to the corporate workplace

There were three purposes to this study. The first purpose was to determine how learning can be influenced by various factors i~ the rock climbing experience. The second purpose was to examine what people can learn from the rock climbing experience. The third purpose was to investigate whether that learning can transfer from the rock climbing experience to the subjects' real life in the workplace. Ninety employees from a financial corporation in the Niagara Region volunteered for this study. All subjects were surveyed throughout a one-day treatment. Ten were purposefully selected one month later for interviews. Ten themes emerged from the subjects in terms of what was learned. Inspiration, motivation, and determination, preparation, goals and limitations, perceptions and expectations, confidence and risk taking, trust and support, teamwork, feedback and encouragement, learning from failure, and finally, skills and flow. All participants were able to transfer what was learned back to the workplace. The results of this study suggested that subjects' learning was influenced by their ability to: take risks in a safe environment, fail without penalty, support each other, plan without time constraints, and enjoy the company of fellow workers that they wouldn't normally associate with. Future directions for research should include different types of treatments such as white water rafting, sky diving, tall ship sailing, or caving.

Arsenic speciation by ion-exchange chromatography with on- line determination by hydride generation: electronic modification of the D.C. plasma by photon counting

A method using L-cysteine for the determination of arsenous acid (As(III)), arsenic acid (As(V)), monomethylarsonic acid (MMAA), and dimethylarsinic acid (DMAA) by hydride generation was demonstrated. The instrument used was a d.c. plasma atomic emission spectrometer (OCP-AES). Complete recovery was reported for As(III), As(V), and DMAA while 86% recovery was reported for MMAA. Detection limits were determined, as arsenic for the species listed previously, to be 1.2, 0.8, 1.1, and 1.0 ngemL-l, respectively. Precision values, at 50 ngemL-1 arsenic concentration, were f.80/0, 2.50/0, 2.6% and 2.6% relative standard deviation, respectively. The L-cysteine reagent was compared directly with the conventional hydride generation technique which uses a potassium iodide-hydrochloric acid medium. Recoveries using L-cysteine when compared with the conventional method provided the following results: similar recoveries were obtained for As(III), slightly better recoveries were obtained for As(V) and MMAA, and significantly better recoveries for DMAA. In addition, tall and sharp peak shapes were observed for all four species when using L-cysteine. The arsenic speciation method involved separation by ion exchange .. high perfonnance liquid chromatography (HPLC) with on-line hydride generation using the L.. cysteine reagent and measurement byOCP-AES. Total analysis time per sample was 12 min while the time between the start of subsequent runs was approximately 20 min. A binary . gradient elution program, which incorporated the following two eluents: 0.01 and 0.5 mM tri.. sodium citrate both containing 5% methanol (v/v) and both at a pH of approximately 9, was used during the separation by HPLC. Recoveries of the four species which were measured as peak area, and were normalized against As(III), were 880/0, 290/0, and 40% for DMAA, MMAA and As(V), respectively. Resolution factors between adjacent analyte peaks of As(III) and DMAA was 1.1; DMAA and MMAA was 1.3; and MMAA and As(V) was 8.6. During the arsenic speciation study, signals from the d.c. plasma optical system were measured using a new photon-signal integrating device. The_new photon integrator developed and built in this laboratory was based on a previously published design which was further modified to reflect current available hardware. This photon integrator was interfaced to a personal computer through an AID convertor. The .photon integrator has adjustable threshold settings and an adjustable post-gain device.