The application of 3D printing to study microfluidic architecture for 'on-chip' mixing systems for SRCD and UV spectroscopy

This paper details methodologies that have been explored for the fast proofing of on-chip architectures for Circular Dichroism techniques. Flow-cell devices fabricated from UV transparent Quartz are used for these experiments. The complexity of flow-cell production typically results in lead times of six months from order to delivery. Only at that point can the on-chip architecture be tested empirically and any required modifications determined ready for the next six month iteration phase. By using the proposed 3D printing and PDMS moulding techniques for fast proofing on-chip architectures the optimum design can be determined within a matter of hours prior to commitment to quartz chip production.

Advanced Applications of 3D Dosimetry and 3D Printing in Radiation Therapy

As complex radiotherapy techniques become more readily-practiced, comprehensive 3D dosimetry is a growing necessity for advanced quality assurance. However, clinical implementation has been impeded by a wide variety of factors, including the expense of dedicated optical dosimeter readout tools, high operational costs, and the overall difficulty of use. To address these issues, a novel dry-tank optical CT scanner was designed for PRESAGE 3D dosimeter readout, relying on 3D printed components and omitting costly parts from preceding optical scanners. This work details the design, prototyping, and basic commissioning of the Duke Integrated-lens Optical Scanner (DIOS).

The convex scanning geometry was designed in ScanSim, an in-house Monte Carlo optical ray-tracing simulation. ScanSim parameters were used to build a 3D rendering of a convex ‘solid tank’ for optical-CT, which is capable of collimating a point light source into telecentric geometry without significant quantities of refractive-index matched fluid. The model was 3D printed, processed, and converted into a negative mold via rubber casting to produce a transparent polyurethane scanning tank. The DIOS was assembled with the solid tank, a 3W red LED light source, a computer-controlled rotation stage, and a 12-bit CCD camera. Initial optical phantom studies show negligible spatial inaccuracies in 2D projection images and 3D tomographic reconstructions. A PRESAGE 3D dose measurement for a 4-field box treatment plan from Eclipse shows 95% of voxels passing gamma analysis at 3%/3mm criteria. Gamma analysis between tomographic images of the same dosimeter in the DIOS and DLOS systems show 93.1% agreement at 5%/1mm criteria. From this initial study, the DIOS has demonstrated promise as an economically-viable optical-CT scanner. However, further improvements will be necessary to fully develop this system into an accurate and reliable tool for advanced QA.

Pre-clinical animal studies are used as a conventional means of translational research, as a midpoint between in-vitro cell studies and clinical implementation. However, modern small animal radiotherapy platforms are primitive in comparison with conventional linear accelerators. This work also investigates a series of 3D printed tools to expand the treatment capabilities of the X-RAD 225Cx orthovoltage irradiator, and applies them to a feasibility study of hippocampal avoidance in rodent whole-brain radiotherapy.

As an alternative material to lead, a novel 3D-printable tungsten-composite ABS plastic, GMASS, was tested to create precisely-shaped blocks. Film studies show virtually all primary radiation at 225 kVp can be attenuated by GMASS blocks of 0.5cm thickness. A state-of-the-art software, BlockGen, was used to create custom hippocampus-shaped blocks from medical image data, for any possible axial treatment field arrangement. A custom 3D printed bite block was developed to immobilize and position a supine rat for optimal hippocampal conformity. An immobilized rat CT with digitally-inserted blocks was imported into the SmART-Plan Monte-Carlo simulation software to determine the optimal beam arrangement. Protocols with 4 and 7 equally-spaced fields were considered as viable treatment options, featuring improved hippocampal conformity and whole-brain coverage when compared to prior lateral-opposed protocols. Custom rodent-morphic PRESAGE dosimeters were developed to accurately reflect these treatment scenarios, and a 3D dosimetry study was performed to confirm the SmART-Plan simulations. Measured doses indicate significant hippocampal sparing and moderate whole-brain coverage.

Commentary on Henrician Proclamation 1538:A Proclamation Prohibiting Unlicensed Printing of Scripture (1538)

Royal Proclamation prohibiting the printing and publishing of ecclesiastical and other books without prior licence, as well as the importation, sale and publication of English language texts printed on the continent. This Proclamation established the precedent for the pre-publication licensing of literary works in England.
The commentary describes the background to the Proclamation, in particular the significance of the English Reformation, and Henry VIII's increasing interest in regulating and censuring the press. The commentary suggests that while this early instance of press intervention influenced governmental attitudes to censorship throughout the next 150 years, one of the crucial differences between this and later models of ideological control was that the 1538 Proclamation sought to censure print materials in a manner that was decoupled from the economic ownership and exploitation of such works.

Commentary on early Tudor printing privileges 1553: Totell's Printing Patent (1553)

One of the earliest examples of work printed by Richard Pynson, the King's Printer between 1508 and 1530, to make reference to the fact that the work in question was printed under the protection of the King. The royal printing privilege provided one of two different models for preventing the unauthorised reproduction of works after publication which prefigured the introduction of statutory copyright in the early eighteenth century.
The commentary describes the early attitudes of the monarchy towards the regulation of the printing trade within England, and the exercise of the royal prerogative in granting printing privileges not just to the royal printer, but to other favoured subjects both in relation to individual works as well as to entire classes of work (with the latter more often referred to as printing patents).

Commentary on early Tudor printing privileges 1559: Day's privilege for The Cosmographical Glass

An early example of a printing privilege granted to protect the printing of an individual work, in this case William Conningham's The Cosmographical Glass. The commentary describes the early attitudes of the monarchy towards the regulation of the printing trade within England, and the exercise of the royal prerogative in granting printing privileges not just to the royal printer, but to other favoured subjects both in relation to individual works as well as to entire classes of work (with the latter more often referred to as printing patents).

Expanding the Design Space: Forging the Transition from 3D Printing to Additive Manufacturing

Thesis (Master's)--University of Washington, 2016-08

A computational fluid dynamics study of the stencil printing process

Abstract not available

Extracting reusable document components for variable data printing

Variable Data Printing (VDP) has brought new flexibility and dynamism to the printed page. Each printed instance of a specific class of document can now have different degrees of customized content within the document template. This flexibility comes at a cost. If every printed page is potentially different from all others it must be rasterized separately, which is a time-consuming process. Technologies such as PPML (Personalized Print Markup Language) attempt to address this problem by dividing the bitmapped page into components that can be cached at the raster level, thereby speeding up the generation of page instances. A large number of documents are stored in Page Description Languages at a higher level of abstraction than the bitmapped page. Much of this content could be reused within a VDP environment provided that separable document components can be identified and extracted. These components then need to be individually rasterisable so that each high-level component can be related to its low-level (bitmap) equivalent. Unfortunately, the unstructured nature of most Page Description Languages makes it difficult to extract content easily. This paper outlines the problems encountered in extracting component-based content from existing page description formats, such as PostScript, PDF and SVG, and how the differences between the formats affects the ease with which content can be extracted. The techniques are illustrated with reference to a tool called COG Extractor, which extracts content from PDF and SVG and prepares it for reuse.

Eighteenth-century type in the roal printing office

Tese apresentada na Faculdade de Arquitetura da Universidade de Lisboa, para obtenção do grau de Doutor em Design

Electrical characterization of electronic circuits produced by inkjet printing

Dissertação de Mestrado, Engenharia Electrónica e Telecomunicações, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2014

A MARKET-BASED APPROACH TO 3D PRINTING FOR ECONOMIC DEVELOPMENT IN GHANA

The purpose of this report is to create the foundation for further study of a market-based approach to 3D printing as an instrument for economic development in Ghana. The delivery of improved products and services to the most underserved markets is needed to spur economic activity and improve standards of living. The relationship between economic development and the advancement of technology is considered within the context of Ghana. An opportunity for market entry exists within both the bottom of the economic pyramid and the mid-segment market. 3D printing (additive manufacturing) has proven to be a disruptive technology that has demonstrated an ability to expedite the speed of innovations and create products that were previously not possible. An investigation of how 3D printers can be used to create improved products for the most underserved markets within Ghana is presented. Questions are asked to elucidate how and when adoption of 3D printers and 3D printed products may occur in the future. Based upon the existing barriers to adoption, 3D printing technology must improve before widespread adoption will occur in Ghana.

Source location of acoustic emission waves for structural health monitoring of bridges

The process of structural health monitoring (SHM) involves monitoring a structure over a period of time using appropriate sensors, extracting damage sensitive features from the measurements made by the sensors and analysing these features to determine the current state of the structure. Various techniques are available for structural health monitoring of structures and acoustic emission (AE) is one technique that is finding an increasing use. Acoustic emission waves are the stress waves generated by the mechanical deformation of materials. AE waves produced inside a structure can be recorded by means of sensors attached on the surface. Analysis of these recorded signals can locate and assess the extent of damage. This paper describes preliminary studies on the application of AE technique for health monitoring of bridge structures. Crack initiation or structural damage will result in wave propagation in solid and this can take place in various forms. Propagation of these waves is likely to be affected by the dimensions, surface properties and shape of the specimen. This, in turn, will affect source localization. Various laboratory test results will be presented on source localization, using pencil lead break tests. The results from the tests can be expected to aid in enhancement of knowledge of acoustic emission process and development of effective bridge structure diagnostics system.