Environmental and biological drivers of feeding and spatial dynamics in the green sea urchin, Strongylocentrotus droebachiensis

In eastern Canada, the destruction of foundational kelp beds by dense aggregations (fronts) of the omnivorous green sea urchin, Strongylocentrotus droebachiensis, is a key determinant of the structure and dynamics of shallow reef communities. Current knowledge about factors affecting the ability of S. droebachiensis to exert top-down community control is based largely on observational studies of patterns in natural habitats, yielding fragmentary, and sometimes contradictory, results. The present research incorporated laboratory microcosm experiments and surveys of urchins in natural habitats to test the effects of abiotic (wave action, water temperature) and biotic (body size, population density) factors on: (1) individual and aggregative feeding on the winged kelp, Alaria esculenta; and (2) displacement, microhabitat use, distribution, and aggregation in food-depleted habitats. Wave action, water temperature, and body size strongly affected the ability of urchins to consume kelp: individual feeding increased with increasing body size and temperature, while aggregative feeding decreased with increasing wave action. Yet, feeding in large urchins dropped by two orders of magnitude between 12 and 18°C. Increasing wave action triggered shifts in urchin displacement, microhabitat use, distribution, and aggregation: urchins reduced displacement and abandoned flat surfaces in favour of crevices. They increasingly formed two-dimensional aggregations at densities ≥110 individuals m⁻². Collectively, results provide a foundational understanding of some of the drivers of feeding and spatial dynamics of S. droebachiensis and potential impacts on the formation of grazing fronts.

On the eigenvalues of the spatial sign covariance matrix in more than two dimensions

Acknowledgments Alexander Dürre was supported in part by the Collaborative Research Grant 823 of the German Research Foundation. David E. Tyler was supported in part by the National Science Foundation grant DMS-1407751. A visit of Daniel Vogel to David E. Tyler was supported by a travel grant from the Scottish Universities Physics Alliance. The authors are grateful to the editors and referees for their constructive comments.

Increased cognitive demands boost the spatial interference effect in bimanual pointing

Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://crea tivecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.

Spatial association of mud volcano and sandstone intrusions, Boyadag anticline, western Turkmenistan

Acknowledgements The Authors are indebted with Dr. Barbara Cerasetti, scientific coordinator of the Italian Archaeological Program in Turkmenistan (Dipartimento di Storia, Culture, Civiltà – Università di Bologna – Ministero per gli Affari Esteri – MAE), for the logistical help before and during the field activities in Turkmenistan. Our thanks to the administration of the National Institute of Deserts, Flora and Fauna, to the Turkmenistan Government and to Dr Aman Nigarov for the fruitful assistance in the field. We thank Prof. Marco Antonellini for the discussions on sandstone intrusions. The authors are indebted to the reviewers J. Peakall, P. Imbert, A. Hurst and an anonymous reviewer for the very helpful comments to the manuscript. Funding was provided by Prof. G. Gabbianelli for the field survey and by PRIN 2009 grants to Prof. Rossella Capozzi.

Visualisation of spatial patterns of connectivity and runoff ages derived from a traceraided model

We thank the European Research Council ERC (project GA 335910 VEWA) for funding the VeWa project.

Increased cognitive demands boost the spatial interference effect in bimanual pointing

Peer reviewed

Strong inference from transect sign surveys : combining spatial autocorrelation and misclassification occupancy models to quantify the detectability of a recovering carnivore

Funding — Forest Enterprise Scotland and the University of Aberdeen provided funding for the project. The Carnegie Trust supported the lead author, E. McHenry, in this research through the award of a tuition fees bursary.

CUBEs: decoupled, compact, and monolithic spatial translational compliant parallel manipulators

This paper deals with the conceptual design of decoupled, compact, and monolithic XYZ compliant parallel manipulators (CPMs): CUBEs. Position spaces of compliant P (P: prismatic) joints are first discussed, which are represented by circles about the translational directions. A design method of monolithic XYZ CPMs is then proposed in terms of both the kinematic substitution method and the position spaces. Three types of monolithic XYZ CPMs are finally designed using the proposed method with the help of three classes of kinematical decoupled 3-DOF (degree of freedom) translational parallel mechanisms (TPMs). These monolithic XYZ CPMs include a 3-PPP XYZ CPM composed of identical parallelogram modules (a previously reported design), a novel 3-PPPR (R: revolute) XYZ CPM composed of identical compliant four-beam modules, and a novel 3-PPPRR XYZ CPM. The latter two monolithic designs also have extended lives. It is shown that the proposed design method can be used to design other decoupled and compact XYZ CPMs by using the concept of position spaces, and the resulting XYZ CPM is the most compact one when the fixed ends of the three actuated compliant P joints thereof overlap.

Spatial Relationships among Hydroacoustic, Hydrographic and Top Predator Patterns: Cetacean Distributions in the Mid-Atlantic Bight

Effective conservation and management of top predators requires a comprehensive understanding of their distributions and of the underlying biological and physical processes that affect these distributions. The Mid-Atlantic Bight shelf break system is a dynamic and productive region where at least 32 species of cetaceans have been recorded through various systematic and opportunistic marine mammal surveys from the 1970s through 2012. My dissertation characterizes the spatial distribution and habitat of cetaceans in the Mid-Atlantic Bight shelf break system by utilizing marine mammal line-transect survey data, synoptic multi-frequency active acoustic data, and fine-scale hydrographic data collected during the 2011 summer Atlantic Marine Assessment Program for Protected Species (AMAPPS) survey. Although studies describing cetacean habitat and distributions have been previously conducted in the Mid-Atlantic Bight, my research specifically focuses on the shelf break region to elucidate both the physical and biological processes that influence cetacean distribution patterns within this cetacean hotspot.

In Chapter One I review biologically important areas for cetaceans in the Atlantic waters of the United States. I describe the study area, the shelf break region of the Mid-Atlantic Bight, in terms of the general oceanography, productivity and biodiversity. According to recent habitat-based cetacean density models, the shelf break region is an area of high cetacean abundance and density, yet little research is directed at understanding the mechanisms that establish this region as a cetacean hotspot.

In Chapter Two I present the basic physical principles of sound in water and describe the methodology used to categorize opportunistically collected multi-frequency active acoustic data using frequency responses techniques. Frequency response classification methods are usually employed in conjunction with net-tow data, but the logistics of the 2011 AMAPPS survey did not allow for appropriate net-tow data to be collected. Biologically meaningful information can be extracted from acoustic scattering regions by comparing the frequency response curves of acoustic regions to theoretical curves of known scattering models. Using the five frequencies on the EK60 system (18, 38, 70, 120, and 200 kHz), three categories of scatterers were defined: fish-like (with swim bladder), nekton-like (e.g., euphausiids), and plankton-like (e.g., copepods). I also employed a multi-frequency acoustic categorization method using three frequencies (18, 38, and 120 kHz) that has been used in the Gulf of Maine and Georges Bank which is based the presence or absence of volume backscatter above a threshold. This method is more objective than the comparison of frequency response curves because it uses an established backscatter value for the threshold. By removing all data below the threshold, only strong scattering information is retained.

In Chapter Three I analyze the distribution of the categorized acoustic regions of interest during the daytime cross shelf transects. Over all transects, plankton-like acoustic regions of interest were detected most frequently, followed by fish-like acoustic regions and then nekton-like acoustic regions. Plankton-like detections were the only significantly different acoustic detections per kilometer, although nekton-like detections were only slightly not significant. Using the threshold categorization method by Jech and Michaels (2006) provides a more conservative and discrete detection of acoustic scatterers and allows me to retrieve backscatter values along transects in areas that have been categorized. This provides continuous data values that can be integrated at discrete spatial increments for wavelet analysis. Wavelet analysis indicates significant spatial scales of interest for fish-like and nekton-like acoustic backscatter range from one to four kilometers and vary among transects.

In Chapter Four I analyze the fine scale distribution of cetaceans in the shelf break system of the Mid-Atlantic Bight using corrected sightings per trackline region, classification trees, multidimensional scaling, and random forest analysis. I describe habitat for common dolphins, Risso’s dolphins and sperm whales. From the distribution of cetacean sightings, patterns of habitat start to emerge: within the shelf break region of the Mid-Atlantic Bight, common dolphins were sighted more prevalently over the shelf while sperm whales were more frequently found in the deep waters offshore and Risso’s dolphins were most prevalent at the shelf break. Multidimensional scaling presents clear environmental separation among common dolphins and Risso’s dolphins and sperm whales. The sperm whale random forest habitat model had the lowest misclassification error (0.30) and the Risso’s dolphin random forest habitat model had the greatest misclassification error (0.37). Shallow water depth (less than 148 meters) was the primary variable selected in the classification model for common dolphin habitat. Distance to surface density fronts and surface temperature fronts were the primary variables selected in the classification models to describe Risso’s dolphin habitat and sperm whale habitat respectively. When mapped back into geographic space, these three cetacean species occupy different fine-scale habitats within the dynamic Mid-Atlantic Bight shelf break system.

In Chapter Five I present a summary of the previous chapters and present potential analytical steps to address ecological questions pertaining the dynamic shelf break region. Taken together, the results of my dissertation demonstrate the use of opportunistically collected data in ecosystem studies; emphasize the need to incorporate middle trophic level data and oceanographic features into cetacean habitat models; and emphasize the importance of developing more mechanistic understanding of dynamic ecosystems.

Assessment of the Spatial and Temporal Distribution of Functional Connectivity in Resting-State BOLD fMRI

Recent research into resting-state functional magnetic resonance imaging (fMRI) has shown that the brain is very active during rest. This thesis work utilizes blood oxygenation level dependent (BOLD) signals to investigate the spatial and temporal functional network information found within resting-state data, and aims to investigate the feasibility of extracting functional connectivity networks using different methods as well as the dynamic variability within some of the methods. Furthermore, this work looks into producing valid networks using a sparsely-sampled sub-set of the original data.

In this work we utilize four main methods: independent component analysis (ICA), principal component analysis (PCA), correlation, and a point-processing technique. Each method comes with unique assumptions, as well as strengths and limitations into exploring how the resting state components interact in space and time.

Correlation is perhaps the simplest technique. Using this technique, resting-state patterns can be identified based on how similar the time profile is to a seed region’s time profile. However, this method requires a seed region and can only identify one resting state network at a time. This simple correlation technique is able to reproduce the resting state network using subject data from one subject’s scan session as well as with 16 subjects.

Independent component analysis, the second technique, has established software programs that can be used to implement this technique. ICA can extract multiple components from a data set in a single analysis. The disadvantage is that the resting state networks it produces are all independent of each other, making the assumption that the spatial pattern of functional connectivity is the same across all the time points. ICA is successfully able to reproduce resting state connectivity patterns for both one subject and a 16 subject concatenated data set.

Using principal component analysis, the dimensionality of the data is compressed to find the directions in which the variance of the data is most significant. This method utilizes the same basic matrix math as ICA with a few important differences that will be outlined later in this text. Using this method, sometimes different functional connectivity patterns are identifiable but with a large amount of noise and variability.

To begin to investigate the dynamics of the functional connectivity, the correlation technique is used to compare the first and second halves of a scan session. Minor differences are discernable between the correlation results of the scan session halves. Further, a sliding window technique is implemented to study the correlation coefficients through different sizes of correlation windows throughout time. From this technique it is apparent that the correlation level with the seed region is not static throughout the scan length.

The last method introduced, a point processing method, is one of the more novel techniques because it does not require analysis of the continuous time points. Here, network information is extracted based on brief occurrences of high or low amplitude signals within a seed region. Because point processing utilizes less time points from the data, the statistical power of the results is lower. There are also larger variations in DMN patterns between subjects. In addition to boosted computational efficiency, the benefit of using a point-process method is that the patterns produced for different seed regions do not have to be independent of one another.

This work compares four unique methods of identifying functional connectivity patterns. ICA is a technique that is currently used by many scientists studying functional connectivity patterns. The PCA technique is not optimal for the level of noise and the distribution of the data sets. The correlation technique is simple and obtains good results, however a seed region is needed and the method assumes that the DMN regions is correlated throughout the entire scan. Looking at the more dynamic aspects of correlation changing patterns of correlation were evident. The last point-processing method produces a promising results of identifying functional connectivity networks using only low and high amplitude BOLD signals.

Spatial Articulations of Race, Desire, and Belonging in Western North Carolina

The sociocultural mythology of the South homogenizes it as a site of abjection. To counter the regionalist discourse, the dissertation intersects queer sexualities with gender and race and focuses on exploring identity and spatial formation among Black lesbian and queer women. The dissertation seeks to challenge the monolith of the South and place the region into multiple contexts and to map Black geographies through an intentional intersectional account of Black queer women. The dissertation utilizes qualitative research methods to ascertain understandings of lived experiences in the production of space. The dissertation argues that an idea of Progress has been indoctrinated as a synonym for the lgbtq civil rights movement and subsequently provides an analysis of progress discourses and queer sexualities and political campaigns of equality in the South. Analyses revealed different ways to situate progress utilizing the public contributions of three Black women interviewed for the dissertation. Moreover, the dissertation utilizes six Black queer and lesbian women to explain the multifarious nature of identities and their construction in place. Black queer and lesbian women produce spaces that deconstruct the normativity of stasis and physicality, and the dissertation explores the consequential realities of being a body in space. These consequences are particularly highlighted in the dissertation by discussions of the processes of racialization in the bounded and unbounded senses of space and place and the impacts of religious institutions, specifically Christianity. The dissertation concluded that no space is without complication. Other considerations should be made in the advancement of alleviating oppression deeply embedded in United States landscapes. Black women’s geographies offer epistemological and ontological renderings that enrich analyses of space, place, and landscape. The dissertation also concludes that Black women’s bodies represent sites for the production of geographic knowledge through narrating their spaces of material trajectories of interlocking, multiscalar lives.

Housing and Planning in London under the Conservative Government: Spatial impacts, social polarisation, sustainable development and social justice

This paper will be based on my continuing research on planning and housing development in London. It will focus on the proposals in the Government’s Housing and Planning Bill, which are likely to be enacted in Spring 2016. It will review the evidence of potential spatial impacts in terms of the supply of existing affordable homes and the location and affordability of new supply. This will be related to a review of the alternative development options for London’s growth in the context of the Mayor of London’s draft 2050 Infrastructure Plan. The paper will analyse the potential impact of new Government policy and legislation on whether London’s housing requirements can be delivered in accordance with the objectives of sustainable planning and social justice, and will also consider the constraints on the ability of the new Mayor of London, to be elected in May 2016 to achieve manifesto commitments.

UTILIZATION OF GIS AND SPATIAL ANALYSIS TECHNIQUES IN ARTISANAL AND SMALL SCALE MINING TO LOCATE A CENTRALIZED PROCESSING CENTRE

One of the global phenomena with threats to environmental health and safety is artisanal mining. There are ambiguities in the manner in which an ore-processing facility operates which hinders the mining capacity of these miners in Ghana. These problems are reviewed on the basis of current socio-economic, health and safety, environmental, and use of rudimentary technologies which limits fair-trade deals to miners. This research sought to use an established data-driven, geographic information (GIS)-based system employing the spatial analysis approach for locating a centralized processing facility within the Wassa Amenfi-Prestea Mining Area (WAPMA) in the Western region of Ghana. A spatial analysis technique that utilizes ModelBuilder within the ArcGIS geoprocessing environment through suitability modeling will systematically and simultaneously analyze a geographical dataset of selected criteria. The spatial overlay analysis methodology and the multi-criteria decision analysis approach were selected to identify the most preferred locations to site a processing facility. For an optimal site selection, seven major criteria including proximity to settlements, water resources, artisanal mining sites, roads, railways, tectonic zones, and slopes were considered to establish a suitable location for a processing facility. Site characterizations and environmental considerations, incorporating identified constraints such as proximity to large scale mines, forest reserves and state lands to site an appropriate position were selected. The analysis was limited to criteria that were selected and relevant to the area under investigation. Saaty’s analytical hierarchy process was utilized to derive relative importance weights of the criteria and then a weighted linear combination technique was applied to combine the factors for determination of the degree of potential site suitability. The final map output indicates estimated potential sites identified for the establishment of a facility centre. The results obtained provide intuitive areas suitable for consideration

Training proposal in the degree of Master of Early Childhood Education for working the method of historical research in the classroom

Future teachers must be competent in creating educational settings, which provide tools to their students future they can develop a conscious mind, able to interpret their experiences, to make decisions and imagine innovative solutions to help you participate autonomously and responsible in society. This requires an educational system that allows them to integrate the subjective into a broader spatial and temporal context. La patrimonializatión of “Cultural artefacts” and oral history, the basis of which, are found in the active mind and links both the personal and the group experience, don’t only serve as a catalyst to achieving this goal, but rather, they facilitate the implementation of established practice in infant education. To gain this experience we offer the opportunity for students of their degree in Infant Education in the Public University of Navarre, training within the framework of social didactics, allowing students to learn about established practice from iconic, materials and oral sources in the Archive of Intangible Cultural Heritage of Navarra. The vidences points to their effectiveness and presented in a work in progress.