Reformulation of variational inequalities on a simplex and compactification of complementarity problems

Many variational inequality problems (VIPs) can be reduced, by a compactification procedure, to a VIP on the canonical simplex. Reformulations of this problem are studied, including smooth reformulations with simple constraints and unconstrained reformulations based on the penalized Fischer-Burmeister function. It is proved that bounded level set results hold for these reformulations under quite general assumptions on the operator. Therefore, it can be guaranteed that minimization algorithms generate bounded sequences and, under monotonicity conditions, these algorithms necessarily nd solutions of the original problem. Some numerical experiments are presented.

Are Working Memory Measures Free of Socioeconomic Influence?

Purpose: This study evaluated the impact of socioeconomic factors on children's performance on tests of working memory and vocabulary.Method: Twenty Brazilian children, aged 6 and 7 years, from low-income families, completed tests of working memory ( verbal short-term memory and verbal complex span) and vocabulary ( expressive and receptive). A further group of Brazilian children from families of higher socioeconomic status matched for age, gender, and nonverbal ability also participated in the study.Results: Children from the low socioeconomic group obtained significantly lower scores on measures of expressive and receptive vocabulary than their higher income peers but no significant group differences were found on the working memory measures.Conclusion: Measures of working memory provide assessments of cognitive abilities that appear to be impervious to substantial differences in socioeconomic background. As these measures are highly sensitive to language ability and learning in general, they appear to provide useful methods for diagnosing specific learning difficulties that are independent of environmental opportunity.

Inequalities in access to education and healthcare

The burden of disease is borne by those who suffer as patients but also by society at large, including health service providers. That burden is felt most severely in parts of the world where there is no infrastructure, or foreseeable prospects of any, to change the status quo without external support. Poverty, disease and inequality pervade all the activities of daily living in low-income regions and are inextricably linked. External interventions may not be the most appropriate way to impact on this positively in all circumstances, but targeted programmes to build social capital, within and by countries, are more likely to be sustainable. By these means, basic oral healthcare, underpinned by the primary healthcare approach, can be delivered to more equitably address needs and demands. Education is fundamental to building knowledge-based economies but is often lacking in such regions even at primary and secondary level. Provision of private education at tertiary level may also introduce its own inequities. Access to distance learning and community-based practice opens opportunities and is more likely to encourage graduates to work in similar areas. Recruitment of faculty from minority groups provides role models for students from similar backgrounds but all faculty staff must be involved in supporting and mentoring students from marginalized groups to ensure their retention. The developed world has to act responsibly in two crucial areas: first, not to exacerbate the shortage of skilled educators and healthcare workers in emerging economies by recruiting their staff; second, they must offer educational opportunities at an economic rate. Governments need to lead on developing initiatives to attract, support and retain a competent workforce.

Higher order turän inequalities

The celebrated Turân inequalities P 2 n(x)-P n-x(x)P n+1(x) ≥ 0, x ε[-1,1], n ≥ 1, where P n(x) denotes the Legendre polynomial of degree n, are extended to inequalities for sums of products of four classical orthogonal polynomials. The proof is based on an extension of the inequalities γ 2 n - γ n-1γ n+1 ≥ 0, n ≥ 1, which hold for the Maclaurin coefficients of the real entire function ψ in the Laguerre-Pölya class, ψ(x) = ∑ ∞ n=0 γ nx n / n!. ©1998 American Mathematical Society.

Bell inequalities for entangled pairs of neutral kaons

We extend the use of Bell inequalities to Φ → K0K̄0 decays by exploiting analogies and differences to the well-known and experimentally verified singlet-spin case. Contrasting with other analyses, our Bell inequalities are violated by quantum mechanics and can strictly be derived from local realistic theories. In principle, quantum mechanics could then be tested using unstable, oscillating states governed by a CP-violating Hamiltonian. © 1999 The American Physical Society.

Bound constrained smooth optimization for solving variational inequalities and related problems

Variational inequalities and related problems may be solved via smooth bound constrained optimization. A comprehensive discussion of the important features involved with this strategy is presented. Complementarity problems and mathematical programming problems with equilibrium constraints are included in this report. Numerical experiments are commented. Conclusions and directions of future research are indicated.

Landau and Kolmogoroff type polynomial inequalities II

Let 0 < j < m ≤ n. Kolmogoroff type inequalities of the form ∥f(j)∥2 ≤ A∥f(m)∥ 2 + B∥f∥2 which hold for algebraic polynomials of degree n are established. Here the norm is defined by ∫ f2(x)dμ(x), where dμ(x) is any distribution associated with the Jacobi, Laguerre or Bessel orthogonal polynomials. In particular we characterize completely the positive constants A and B, for which the Landau weighted polynomial inequalities ∥f′∥ 2 ≤ A∥f″∥2 + B∥f∥ 2 hold. © Dynamic Publishers, Inc.

Robust control to parametric uncertainties in smart structures using linear matrix inequalities

The study of algorithms for active vibrations control in flexible structures became an area of enormous interest, mainly due to the countless demands of an optimal performance of mechanical systems as aircraft and aerospace structures. Smart structures, formed by a structure base, coupled with piezoelectric actuators and sensor are capable to guarantee the conditions demanded through the application of several types of controllers. This article shows some steps that should be followed in the design of a smart structure. It is discussed: the optimal placement of actuators, the model reduction and the controller design through techniques involving linear matrix inequalities (LMI). It is considered as constraints in LMI: the decay rate, voltage input limitation in the actuators and bounded output peak (output energy). Two controllers robust to parametric variation are designed: the first one considers the actuator in non-optimal location and the second one the actuator is put in an optimal placement. The performance are compared and discussed. The simulations to illustrate the methodology are made with a cantilever beam with bonded piezoelectric actuators.

Active flutter suppression in a 2-D airfoil using linear matrix inequalities techniques

Flutter is an in-flight vibration of flexible structures caused by energy in the airstream absorbed by the lifting surface. This aeroelastic phenomenon is a problem of considerable interest in the aeronautic industry, because flutter is a potentially destructive instability resulting from an interaction between aerodynamic, inertial, and elastic forces. To overcome this effect, it is possible to use passive or active methodologies, but passive control adds mass to the structure and it is, therefore, undesirable. Thus, in this paper, the goal is to use linear matrix inequalities (LMIs) techniques to design an active state-feedback control to suppress flutter. Due to unmeasurable aerodynamic-lag states, one needs to use a dynamic observer. So, LMIs also were applied to design a state-estimator. The simulated model, consists of a classical flat plate in a two-dimensional flow. Two regulators were designed, the first one is a non-robust design for parametric variation and the second one is a robust control design, both designed by using LMIs. The parametric uncertainties are modeled through polytopic uncertainties. The paper concludes with numerical simulations for each controller. The open-loop and closed-loop responses are also compared and the results show the flutter suppression. The perfomance for both controllers are compared and discussed. Copyright © 2006 by ABCM.

Active control in flexible plates with piezoelectric actuators using linear matrix inequalities

The study of algorithms for active vibrations control in flexible structures became an area of enormous interest, mainly due to the countless demands of an optimal performance of mechanical systems as aircraft, aerospace and automotive structures. Smart structures, formed by a structure base, coupled with piezoelectric actuators and sensor are capable to guarantee the conditions demanded through the application of several types of controllers. The actuator/sensor materials are composed by piezoelectric ceramic (PZT - Lead Zirconate Titanate), commonly used as distributed actuators, and piezoelectric plastic films (PVDF-PolyVinyliDeno Floride), highly indicated for distributed sensors. The design process of such system encompasses three main phases: structural design; optimal placement of sensor/actuator (PVDF and PZT); and controller design. Consequently, for optimal design purposes, the structure, the sensor/actuator placement and the controller have to be considered simultaneously. This article addresses the optimal placement of actuators and sensors for design of controller for vibration attenuation in a flexible plate. Techniques involving linear matrix inequalities (LMI) to solve the Riccati's equation are used. The controller's gain is calculated using the linear quadratic regulator (LQR). The major advantage of LMI design is to enable specifications such as stability degree requirements, decay rate, input force limitation in the actuators and output peak bounder. It is also possible to assume that the model parameters involve uncertainties. LMI is a very useful tool for problems with constraints, where the parameters vary in a range of values. Once formulated in terms of LMI a problem can be solved efficiently by convex optimization algorithms.

Is the prevalence of asthma and related symptoms among Brazilian children related to socioeconomic status?

Objective. To evaluate the relationship between socioeconomic status (SES) and the prevalence of asthma and related symptoms among Brazilian children. Methods. The International Study of Asthma and Allergies in Childhood (ISAAC) written questionnaire was applied to 23,457 six- to seven- year-old schoolchildren (SC) and 58,144 thirteen- to fourteen-year-old adolescents (AD) from 20 Brazilian cities. SES was evaluated by infant mortality index, poverty index, and average nominal income for people older than 10 years of age. Results. Current asthma ranged from 16.5% to 31.2% among SC and from 11.8% to 30.5% among AD and severe asthma from 2.9% to 8.5% (SC) and 2.6% to 9.1% (AD). Higher values were observed in Brazilian-Northern, -Northeastern and -Southeastern centers. No significant association between SES and prevalence of asthma and related symptoms was observed. Conclusions. In Brazil, the prevalence of asthma and related symptoms is quite variable and independent of SES. Copyright © 2008 Informa Healthcare USA, Inc.

Social Panorama of Latin America 2010

Includes bibliography

Active control in rotating machinery using magnetic actuators with linear matrix inequalities (LMI) approach

The recent years have seen the appearance of innovative system for acoustic and vibration attenuation, most of them integrating new actuator technologies. In this sense, the study of algorithms for active vibrations control in rotating machinery became an area of enormous interest, mainly due to countless demands of an optimal performance of mechanical systems in aircraft, aerospace and automotive structures. In this way, this paper presents an approach that is numerically verified for active vibration control in a rotor using Active Magnetic Bearings (AMB). The control design in a discrete state-space formulation is carried out through feedback technique and Linear Matrix Inequalities (LMI) approach. LMI is useful for system with uncertainties. The AMB uses electromagnetic forces to support a rotor without mechanical contact. By monitoring the position of the shaft and changing the dynamics of the system accordingly, the AMB keeps the rotor in a desired position. This unique feature has broadened for the applications of AMB and now they can be considered not only as a main support bearing in a machine but also as dampers for vibration control and force actuators. © 2009 Society for Experimental Mechanics Inc.