Isolation and quantitative HPLC-PDA analysis of lupeol in phytopharmaceutical intermediate products from Vernonanthura ferruginea (Less.) H. Rob.

Prior to obtain a standardized dried extract from V. ferruginea, lupeol was first time isolated from leaves and used as chemical maker. An analytical method using HPLC-PDA for lupeol determination in V. ferruginea intermediate products was developed using a C8 reverse-phase column, acetonitrile-acetic acid (99.99:0.01, v/v) as mobile phase at 0.8 mL min-1, oven temperature at 23-25 ºC, sample injection volume at 30 µL and detection at 210 nm. The method presented linearity from 10 to 160 µg mL-1, accuracy, precision, robustness and suitable sensitivity proving to be a useful tool to the obtainment process of lupeol standardized dried extracts of V. ferruginea.

Immunolocalisation of secreted-excreted products of Meloidogyne spp. using polyclonal and monoclonal antibodies

Molecules expressed at the surface cuticle (SC) of plant parasitic nematodes represent the primary plant-nematode interface, and together with secreted-excreted (S-E) products are probably the first signals perceived by the host. These molecules, which are released into plant tissue, probably play important roles in the host-parasite interactions. Characterisation of these antigens will help in the identification of nematode targets useful for novel control strategies, which interfere with the nematode infection of plants. Three monoclonal (MAbs) and three polyclonal (PAbs) antibodies produced to S-E products of Meloidogyne spp. and Heterodera avenae were used to examine their reactivity towards M. incognita and/or M. arenaria second stage juveniles and adult females. The three PAbs showed cross-reactivity with M. incognita and M. arenaria. Antibody Roth-PC 373 strongly recognised molecules present in the SC, amphids and intestine, antibody Roth-PC 389 recognised the nematode amphids and metacorpus, while antibody Roth-PC 419 bound to molecules present in the subventral glands. Reactivity of the MAbs was only tested against M. arenaria. Monoclonal antibody Roth-MAb T116C1.1 showed intense reactivity with molecules present in the amphidial and phasmidial glands. Monoclonal antibodies Roth-MAb T46.2 and T42D.2 labeled the nematode amphids and molecules present in the nematode oesophagus (metacorpus), respectively.

Creating carbon footprint calculating tool for plastic packaging products

The environmental challenges of plastic packaging industry have increased remarkably along with climate change debate. The interest to study carbon footprints of packaging has increased in packaging industry to find out the real climate change impacts of packaging. In this thesis the greenhouse gas discharges of plastic packaging during their life cycle is examined. The carbon footprint is calculated for food packaging manufactured from plastic laminate. The structure of the laminate is low density polyethylene (PE-LD) and oriented polypropylene (OPP), which have been joined together with laminating adhesive. The purpose is to find out the possibilities to create a carbon footprint calculating tool for plastic packaging and its usability in a plastic packaging manufacturing company. As a carbon footprint calculating method PAS 2050 standard has been used. In the calculations direct and indirect greenhouse gas discharges as well as avoided discharges are considered. Avoided discharges are born for example in packaging waste utilization as energy. The results of the calculations have been used to create a simple calculating tool to be used for similar laminate structures. Although the utilization of the calculating tool is limited to one manufacturing plant because the primary activity data is dependent of geographical location and for example the discharges of used energy in the plant. The results give an approximation of the climate change potential caused by the laminate. It is although noticed that calculations do not include all environmental impacts of plastic packaging´s life cycle.

Utilization of non-wood pulp in different fibers products

The correct utilization of non-wood raw material allows reducing tree cutting and reduces emissions of carbon dioxide from burning of non-wood plants on farmers fields. Also it allows increasing economical situation in regions that non-wood plants are grown and where they are converted into pulp and paper. Also it gives positive effect on population pressure of work by addition of working place. In the literature survey included an overview of the historical meaning of non-wood pulp on developing paper production and structure of non-wood pulps. Moreover, anatomical and chemical composition of straw, reed and bamboo were studied more detailed. Also, an overview of the utilization of non-wood pulp in papermaking was made. Especially tissue, tree-free and release papers were reviewed. In the experimental part the goal was to investigate suitability of non-wood pulp like wheat straw pulp and bamboo pulp for different fiber products. Finally release and tree-free paper products were selected for experimental studies. It was discovered that wheat straw, especially screened wheat straw, showed good results for release paper. Also utilization of wheat straw and bamboo pulp in tree-free paper showed good results and suitability of these non-wood pulps for tree-free paper production. Also it was noticed that addition of wheat straw pulp gave positive effect on initial wet strength for release and tree-free paper.

Natural and synthetic fibres improving tensile strength and elongation of paper products

The theory part of the Master’s thesis introduces fibres with high tensile strength and elongation used in the production of paper or board. Strong speciality papers are made of bleached softwood long fibre pulp. The aim of the thesis is to find new fibres suitable for paper making to increase either tensile strength, elongation or both properties. The study introduces how fibres bond and what kind of fibres give the strongest bonds into fibre matrix. The fibres that are used the in manufacturing of non-wovens are long and elastic. They are longer than softwood cellulose fibres. The end applications of non-wovens and speciality papers are often the same, for instance, wet napkins or filter media. The study finds out which fibres are used in non-wovens and whether the same fibres could be added to cellulose pulp as armature fibres, what it would require for these fibres to be blended in cellulose, how they would bind with cellulose and whether some binding agents or thermal bonding, such as hot calendaring would be necessary. The following fibres are presented: viscose, polyester, nylon, polyethylene, polypropylene and bicomponent fibres. In the empiric part of the study the most suitable new fibres are selected for making hand sheets in laboratory. Test fibres are blended with long fibre cellulose. The test fibres are viscose (Tencel), polypropylene and polyethylene. Based on the technical values measured in the sheets, the study proposes how to continue trials on paper machine with viscose, polyester, bicomponent and polypropylene fibres.

Cost evaluation process for competitors' products

A company’s capability to map out its cost position compared to other market players is important for competitive decision making. One aspect of cost position is direct product cost that illustrates the cost efficiency of a company’s product designs. If a company can evaluate and compare its own and other market players’ direct product costs, it can implement better decisions in product development and management, manufacturing, sourcing, etc. The main objective of this thesis was to develop a cost evaluation process for competitors’ products. This objective includes a process description and an analysis tool for cost evaluations. Additionally, process implementation is discussed as well. The main result of this thesis was a process description consisting of a sixteen steps process and an Excel based analysis tool. Since literature was quite limited in this field, the solution proposal was combined from many different theoretical concepts. It includes influences from reverse engineering, product cost assessment, benchmarking and cost based decision making. This solution proposal will lead to more systematic and standardized cost position analyses and result in better cost transparency in decision making.

Spatial and Spectral Separability of Grasslands in the inner Turku Archipelago using Landsat Thematic Mapper Satellite Imagery

The present study investigates the spatial and spectral discrimination potential for grassland patches in the inner Turku Archipelago using Landsat Thematic Mapper satellite imagery. The spatial discrimination potential was computed through overlay analysis using official grassland parcel data and a hypothetical 30 m resolution satellite image capturing the site. It found that Landsat TM imagery’s ability to retrieve pure or near-pure pixels (90% purity or more) from grassland patches smaller than 1 hectare was limited to 13% success, compared to 52% success when upscaling the resolution to 10 x 10 m pixel size. Additionally, the perimeter/area patch metric is proposed as a predictor for the suitability of the spatial resolution of input imagery. Regression analysis showed that there is a strong negative correlation between a patch’s perimeter/area ratio and its pure pixel potential. The study goes on to characterise the spectral response and discrimination potential for the five main grassland types occurring in the study area: recreational grassland, traditional pasture, modern pasture, fodder production grassland and overgrown grassland. This was done through the construction of spectral response curves, a coincident spectral plot and a contingency matrix as well as by calculating the transformed divergence for the spectral signatures, all based on training samples from the TM imagery. Substantial differences in spectral discrimination potential between imagery from the beginning of the growing season and the middle of summer were found. This is because the spectral responses for these five grassland types converge as the peak of the growing season draws nearer. Recreational grassland shows a consistent discrimination advantage over other grassland types, whereas modern pasture is most easily confused. Traditional pasture land, perhaps the most biologically valuable grassland type, can be spectrally discriminated from other grassland types with satisfactory success rates provided early growing season imagery is used.

Leaf-Targeted Ferredoxin-NADP+-Oxidoreductase (FNR): Electron Transfer Properties and Thylakoid Association in Arabidopsis thaliana

Photosynthetic reactions are divided in two parts: light-driven electron transfer reactions and carbon fixation reactions. Electron transfer reactions capture solar energy and split water molecules to form reducing energy (NADPH) and energy-carrying molecules (ATP). These end-products are used for fixation of inorganic carbon dioxide into organic sugar molecules. Ferredoxin-NADP⁺ oxidoreductase (FNR) is an enzyme that acts at the branch point between the electron transfer reactions and reductive metabolism by catalyzing reduction of NADP+ at the last step of the electron transfer chain. In this thesis, two isoforms of FNR from A rabidopsis thaliana, FNR1 and FNR2, were characterized using the reverse genetics approach. The fnr1 and fnr2 mutant plants resembled each other in many respects. Downregulation of photosynthesis protected the single fnr mutant plants from excess formation of reactive oxygen species (ROS), even without significant upregulation of antioxidative mechanisms. Adverse growth conditions, however, resulted in phenotypic differences between fnr1 and fnr2. While fnr2 plants showed downregulation of photosynthetic complexes and upregulation of antioxidative mechanisms under low-temperature growth conditions, fnr1 plants had the wild-type phenotype, indicating that FNR2 may have a specific role in redistribution of electrons under unfavorable conditions. The heterozygotic double mutant (fnr1xfnr2) was severely devoid of chloroplastic FNR, which clearly restricted photosynthesis. The fnr1xfnr2 plants used several photoprotective mechanisms to avoid oxidative stress. In wild-type chloroplasts, both FNR isoforms were found from the stroma, the thylakoid membrane, and the inner envelope membrane. In the absence of the FNR1 isoform, FNR2 was found only in the stroma, suggesting that FNR1 and FNR2 form a dimer, by which FNR1 anchors FNR2 to the thylakoid membrane. Structural modeling predicted formation of an FNR dimer in complex with ferredoxin. In this thesis work, Tic62 was found to be the main protein that binds FNR to the thylakoid membrane, where Tic62 and FNR formed high molecular weight complexes. The formation of such complexes was shown to be regulated by the redox state of the chloroplast. The accumulation of Tic62-FNR complexes in darkness and dissociation of complexes from the membranes in light provide evidence that the complexes may have roles unrelated to photosynthesis. This and the high viability of fnr1 mutant plants lacking thylakoid-bound FNR indicate that the stromal pool of FNR is photosynthetically active.

Biosynthesis of Yersinia enterocolitica serotype O:3 lipopolysaccharide outer core

Lipopolysacharide (LPS) present on the outer leaflet of Gram-negative bacteria is important for the adaptation of the bacteria to the environment. Structurally, LPS can be divided into three parts: lipid A, core and O-polysaccharide (OPS). OPS is the outermost and also the most diverse moiety. When OPS is composed of identical sugar residues it is called homopolymeric and when it is composed of repeating units of oligosaccharides it is called heteropolymeric. Bacteria synthesize LPS at the inner membrane via two separate pathways, Lipid A-core via one and OPS via the other. These are ligated together in the periplasmic space and the completed LPS molecule is translocated to the surface of the bacteria. The genes directing the OPS biosynthesis are often clustered and the clusters directing the biosynthesis of heteropolymeric OPS often contain genes for i) the biosynthesis of required NDP-sugar precursors, ii) glycosyltransferases needed to build up the repeating unit, iii) translocation of the completed O-unit to the periplasmic side of the inner membrane (flippase) and iv) polymerization of the repeating units to complete OPS. The aim of this thesis was to characterize the biosynthesis of the outer core (OC) of Yersinia enterocolitica serotype O:3 (YeO3). Y. enterocolitica is a member of the Gram-negative Yersinia genus and it causes diarrhea followed sometimes by reactive arthritis. The chemical structure of the OC and the nucleotide sequence of the gene cluster directing its biosynthesis were already known; however, no experimental evidence had been provided for the predicted functions of the gene products. The hypothesis was that the OC biosynthesis would follow the pathway described for heteropolymeric OPS, i.e. a Wzy-dependent pathway. In this work the biochemical activities of two enzymes involved in the NDP-sugar biosynthesis was established. Gne was determined to be a UDP-N-acetylglucosamine-4-epimerase catalyzing the conversion of UDP-GlcNAc to UDP-GalNAc and WbcP was shown to be a UDP-GlcNAc- 4,6-dehydratase catalyzing the reaction that converts UDP-GlcNAc to a rare UDP-2-acetamido- 2,6-dideoxy-d-xylo-hex-4-ulopyranose (UDP-Sugp). In this work, the linkage specificities and the order in which the different glycosyltransferases build up the OC onto the lipid carrier were also investigated. In addition, by using a site-directed mutagenesis approach the catalytically important amino acids of Gne and two of the characterized glycosyltranferases were identified. Also evidence to show the enzymes involved in the ligations of OC and OPS to the lipid A inner core was provided. The importance of the OC to the physiology of Y. enterocolitica O:3 was defined by determining the minimum requirements for the OC to be recognized by a bacteriophage, bacteriocin and monoclonal antibody. The biological importance of the rare keto sugar (Sugp) was also shown. As a conclusion this work provides an extensive overview of the biosynthesis of YeO3 OC as it provides a substantial amount of information of the stepwise and coordinated synthesis of the Ye O:3 OC hexasaccharide and detailed information of its properties as a receptor.

Packaging concept development for an assortment of medical device products

Diplomityön tavoitteena oli kehittää Wipak Oy:n valmistamille sterilointipakkauksille tulevaisuuden pakkauskonsepti. Sterilointipakkaukset luokitellaan lääkelaitedirektiivin mukaan lisätarvikkeiksi luokan 1 lääkelaitteille, ja tämä näkökulma oli vahvasti mukana konseptin kehityksessä. Lähtökohtana pakkauskonseptin suunnittelulle oli tuotteiden arvoketjussa, eli pakata tuotteet siten että pakkausten avulla voidaan tuottaa lisäarvoa arvoketjun toimijoille. Tavoitteena oli parantaa pakkausten viestintää, toimivuutta/tehokkuutta toimitusketjussa sekä vahvistaa brändin imagoa myynti- ja kuljetuspakkauksen avulla. Lääkinnälliset laitteet ja tarvikkeet ovat lainsäädännön ja normien avulla tarkasti säädeltyjä. Näiden normien vaatimukset asettavat perusteet myynti- ja kuljetuspakkausten kehittämiselle. Tämän lisäksi suunnittelussa on huomioitu asiakkaiden toiveet ja kehitystarpeet. Kirjallisuusosuudessa on keskitytty lääkinnällisten laitteiden pakkausyksiköiden toimintoihin sekä niiden kehitysnäkymiin. Pääpaino on ollut pakkausmerkintöjen ja jäljitettävyyden kehittämisellä, koska tietojen automaattisen tunnistuksen hyödyntäminen lääkintälaitteiden pakkausten arvoketjussa on kasvava trendi. Manuaalisesti tehtävät tuotevirtojen kirjaukset ketjun eri toimijoiden osalta lisäävät riskejä jäljitettävyyden kannalta ja aiheuttavat lisätyötä ja – kustannuksia ketjun kaikille osapuolille. Ehdotus uudesta pakkauskonseptista on kehitetty näiden tietojen pohjalta. Ehdotuksessa on huomioitu lainsäädännöstä ja ketjun toimijoilta tulevat tarpeet, sekä alan tulevaisuuden kehitysnäkymät. Ehdotetun pakkauskonseptin avulla saadaan lisättyä myynti- ja kuljetuspakkausten tehokkuutta, parannettua jäljitettävyyttä ja helpotettu arvoketjun alavirran toimijoiden työtä lisäämällä erillinen sisäpakkaus myyntiyksikön sisälle. Työssä on lisäksi selvitetty pakkauskonseptin kustannusvaikutukset tuotteiden hintaan. Lopussa on ehdotettu jatkotoimenpiteet suunnitelman implementoimisesta käytäntöön.

Control system for forced-air cooling of horticultural products

This work is a study of the implementation of a classical controller using a tuning method referred to as IMC (Internal Model Control) and aimed at the reduction of electrical energy consumption by the appropriate relation between energy consumption and the cooling time with forced air. The supervisory system installed was able to manipulate the variable of frequency of the signal power of the exhaust fan engine (forced air module), to accelerate or decelerate the loss of heat from the product to be cooled by airflow variation that passes through the mass of the produce. The results demonstrated a reduction in energy consumption from 64% and an increase of only 8% in the cooling time to the system using PI/IMC (Proportional - Integral with IMC) tuning method compared with the system in its operating nominal condition. This PI/IMC control may be implemented directly in a frequency converter, without the need to purchase a computer or PLC (programmable logic controller) to run the dedicated application, increasing its economical viability.

Seasonality of net radiation in two sub-basins of Paracatu by the use of modis sensor products

The net radiation (Rn) represents the main source of energy for physical and chemical processes that occur in the surface-atmosphere interface, and it is used for air and soil heating, water transfer, in the form of vapor from the surface to the atmosphere, and for the metabolism of plants, especially photosynthesis. If there is no record of net radiation in certain areas, the use of information is important to help determine it. Among them we can highlight those provided by remote sensing. In this context, this work aims to estimate the net radiation, with the use of products of MODIS sensor, in the sub-basins of Entre Ribeiros creek and Preto River, located between the Brazilian states of Goiás and Minas Gerais. The SEBAL (Surface Energy Balance Algorithm for Land) was used to obtain the Rn in four different days in the period of July to October, 2007. The Rn results obtained were consistent with others cited in the literature and are important because the orbital information can help determine the Rn in areas where there are not automatic weather stations to record the net radiation.

Mellom tradisjon og spel : didaktikk for tekstil folkekunst

Denne avhandlinga er resultatet av eit behov for å forske på og utvikle ein didaktikk for tekstilfaget ved Folkekunststudiet, Institutt for folkekultur, Høgskolen i Telemark, Noreg. Studiet med folkekunst som fagfelt er eit relativt ungt studium på høgskolen, som vart etablert i 1984. Problemstillinga i denne avhandlinga er korleis ein kan utvikle ein forskingsbasert didaktikk der dei grunnleggjande prinsippa som særmerkjer den tradisjonelle folkekunsten, vert tekne vare på. I arbeidet med avhandlinga har eg prøvd på å klårgjere problemstillinga ut frå ulike perspektiv. Forskingsarbeidet har fokus på kommunikasjon og arbeidsmåtar i ljos av ulike teoriar. Det er ei hermeneutisk tilnærming som er vald for den didaktiske forståinga. Det fyrste drøftingstemaet har søkjeljos på kommunikasjon og dialog ved vidareføring av tekstil folkekunst. Både estetiske, teoretiske, praktiske og sosiale aspekt er nedfelte i læreplanen for studiet og skal utgjere grunnlaget for kommunikasjon og arbeidsmåtar. I den skapande og kopierande prosessen er det utvikla språklege reiskapar for både den sosiale og den estetiske sida der den teoretiske og praktiske faktoren er integrert. Møte med døme på tekstile tradisjonar så vel som praktisk forming av tekstilar har ført til refleksjon og dialog som involverer kontemplasjon, korrespondens og imaginasjon. Det andre temaet som er drøfta, er vidareføring av tradisjonelt visuelt formspråk. Her er merksemda retta mot kva som har skjedd formalt med ei gruppe tradisjonelle formelement i tekstilar i den institusjonelle vidareføringa over eit lengre tidsperspektiv. Resultatet syner at mange tradisjonelle formelement er borte frå den institusjonelle produksjonen. Formelementa kan ha fått ei meir naturalistisk utforming, eller dei er overførte til andre tradisjonelle tekstilteknikkar enn dei som var utgangspunktet. Rombeforma i den institusjonelle produksjonen er utført i færre variasjonar og kombinasjonar enn i den tradisjonelle produksjonen. Konklusjonen på drøftingstemaet er at spelereglar og spatialitet i høve til den formale komponenten i utvalet med tradisjonelle tekstilar ikkje er vidareført i alle gruppene av institusjonelle produkt. Resultatet kan få innverknad og fylgjer for utforming av ein framtidig didaktikk for faget. Arbeidsmåte og erfaring frå vidareføring av tekstile tradisjonar er det tredje temaet som er drøfta i avhandlinga. Kopiering og skapande prosessar er arbeidsmåtar som er brukte ved studiet i dag, og dei utgjer grunnlag for drøftingar i relasjon til vidareføring og erfaring. Konklusjonen er at i den skapande prosessen korrigerer tradisjonen utforminga, medan i kopiprosessen er eigen stilvilje og improvisering resultat av prosessane. Personar som deltek i prosessane, har sett seg sjølve og si historiske forankring inn i spelet, der visuelt og verbalt språk er resultat av integrasjon av tradisjonar. Dei tre drøftingstemaa utgjer grunnlaget for at didaktikk for folkekunst og tekstil kan bli intersubjektiv forståing av kva ein didaktikk for vidareføring av folkekunst med vekt på tekstil kan vere i utdanninga i dag. Indre og ytre dialog i skapande og kopierande prosessar femner om estetiske, materielle og tekniske faktorar sett i høve til spelereglar, spelerom, spatialitet og samspel i møte med tekstile tradisjonar. Samla utgjer det ein forskingsbasert didaktikk for faget der den overordna intensjonen er samtykke mellom tradisjon og spel.

Effects of Country of Origin on Consumer Product Evaluations: Finnish clothing products in the minds of Russian tourists

Companies operating in today’s highly internationalized markets consider product differentiation the key priority in pursue to attain a constant competitive advantage in challenging global environment (Baker and Ballington 2002, 158). The main driver affecting companies’ differentiation actions was described as early as 1912 by one of the marketing pioneers A. W. Shaw (1912, 710) as meeting human wants more accurate than the competition, and thus increasing customers’ perceived value and satisfaction. Dickson and Ginter (1987, 2) point out in their study based on earlier research by Chamberlin (1965) and Porter (1976) that differentiation can be based on either tangible characteristics of a product such as design or intangible characteristics such as a brand name and country of origin (hereafter referred to as COO). The concept of COO and its impact on consumers’ evaluation of a product as an extrinsic product cue has been one of the most noteworthy topics in international marketing, having been voluminously examined by over 780 authors in more than 750 academic publications in the past 40 years (Papadopoulos and Heslop 2002, 294). Many of these studies accentuate the significant effect the COO has on consumers’ product attribute evaluations. People routinely associate country images with products and services in order to judge and categorize them based on perceived quality and risk levels; thereby COO can influence the likelihood of a purchase (Peterson and Jolibert 1995, 883-884; Verlegh and Steenkamp 1999, 523). Based on the vast research related to COO in the field of international business, it is widely recognized that the country associated with a product can act in a similar way as the name of a brand and even become a part of product’s total image. Thereby depending on customer’s values and perceptions, the product-country image can either increase or decrease perceived value.