Effects of ethanol intake on retinol concentration in the milk of lactating rats

The effect of the consumption of ethanol (5%) on retinol concentration in milk was studied in the rat on day 12 after delivery, together with the evolution of dam body weight and pup growth rate. Female Wistar rats receiving alcohol (5%) in drinking water during lactation (N = 7) were compared to normal controls fed ad libitum (N = 6). The mean maternal alcohol intake was 3.96 ± 0.23 g/kg body weight per day. To determine retinol levels in milk we used the Bessey and Lowry method, modified by Araújo and Flores ((1978) Clinical Chemistry, 24: 386-392). The pups were separated from dams for a 2-4-h period, after which the dams were injected intraperitoneally with anesthetic and oxytocin. The concentration of retinol in milk was 162.88 ± 10.60 µg/dl in the control group and 60.02 ± 8.22 µg/dl in the ethanol group (P<0.05). The ethanol group consumed less food than the controls and lost a significant amount of weight during lactation. On days 8, 10 and 12, the body weight of the pups from rats given ethanol (13.46 ± 0.43, 16.12 ± 0.48 and 18.60 ± 0.91 g, respectively) were significantly lower (P<0.05) than the weight of pups from controls (15.2 ± 0.44, 18.36 ± 0.54, 20.77 ± 0.81 g). These data show that ethanol intake during the suckling period, even at low concentrations, decreases the amount of retinol in milk and, therefore, the amount available to the pups.

Energy and raw material consumption analysis of powder bed fusion: case study: CNC machining and laser additive manufacturing

Laser additive manufacturing (LAM), known also as 3D printing, is a powder bed fusion (PBF) type of additive manufacturing (AM) technology used to manufacture metal parts layer by layer by assist of laser beam. The development of the technology from building just prototype parts to functional parts is due to design flexibility. And also possibility to manufacture tailored and optimised components in terms of performance and strength to weight ratio of final parts. The study of energy and raw material consumption in LAM is essential as it might facilitate the adoption and usage of the technique in manufacturing industries. The objective this thesis was find the impact of LAM on environmental and economic aspects and to conduct life cycle inventory of CNC machining and LAM in terms of energy and raw material consumption at production phases. Literature overview in this thesis include sustainability issues in manufacturing industries with focus on environmental and economic aspects. Also life cycle assessment and its applicability in manufacturing industry were studied. UPLCI-CO2PE! Initiative was identified as mostly applied exiting methodology to conduct LCI analysis in discrete manufacturing process like LAM. Many of the reviewed literature had focused to PBF of polymeric material and only few had considered metallic materials. The studies that had included metallic materials had only measured input and output energy or materials of the process and compared to different AM systems without comparing to any competitive process. Neither did any include effect of process variation when building metallic parts with LAM. Experimental testing were carried out to make dissimilar samples with CNC machining and LAM in this thesis. Test samples were designed to include part complexity and weight reductions. PUMA 2500Y lathe machine was used in the CNC machining whereas a modified research machine representing EOSINT M-series was used for the LAM. The raw material used for making the test pieces were stainless steel 316L bar (CNC machined parts) and stainless steel 316L powder (LAM built parts). An analysis of power, time, and the energy consumed in each of the manufacturing processes on production phase showed that LAM utilises more energy than CNC machining. The high energy consumption was as result of duration of production. Energy consumption profiles in CNC machining showed fluctuations with high and low power ranges. LAM energy usage within specific mode (standby, heating, process, sawing) remained relatively constant through the production. CNC machining was limited in terms of manufacturing freedom as it was not possible to manufacture all the designed sample by machining. And the one which was possible was aided with large amount of material removed as waste. Planning phase in LAM was shorter than in CNC machining as the latter required many preparation steps. Specific energy consumption (SEC) were estimated in LAM based on the practical results and assumed platform utilisation. The estimated platform utilisation showed SEC could reduce when more parts were placed in one build than it was in with the empirical results in this thesis (six parts).

Preclinical evaluation of the antidiabetic effect of Eugenia jambolana seed powder in streptozotocin-diabetic rats

The world is facing an explosive increase in the incidence of diabetes mellitus and cost-effective complementary therapies are needed. The effects of Eugenia jambolana, a household remedy for diabetes, were studied. Streptozotocin diabetic female albino Wistar rats weighing 150-200 g (N = 6) were fed E. jambolana seed powder (250, 500 or 1000 mg/kg) for 15 days. Diabetic rats fed 500 and 1000 mg/kg seed powder showed an increase in body weight on day 20 in relation to day 5 (6 ± 4.7, 9 ± 7.8 vs diabetic control -16 ± 7.1 g, P < 0.001), a decrease in fasting blood glucose (75 ± 11.9, 123 ± 14.4 vs diabetic control -34 ± 12.1 mg/dl, P < 0.001), a difference in post-treatment fasting and peak blood glucose (38 ± 11.9, 36 ± 14.2 vs diabetic control 78 ± 11.9 mg/dl, P < 0.001), and a difference in liver glycogen (50 ± 6.8, 52 ± 7.5 vs normal control 90 ± 6.6 µg/g of liver tissue, P < 0.001). Tri-terpenoids, tannins, gallic acid, and oxalic acid were the chemical constituents detected in E. jambolana seed. The best results were obtained with an oral dose of 500 mg/kg. Subacute toxicity studies with a single administration of 2.5 and 5.0 g/kg seed powder showed no mortality or abnormality. These data on the antidiabetic effect of E. jambolana seed are adequate for approval of phase 2 clinical trials to evaluate this seed powder as complementary therapy in type 2 and type 1 diabetes.

Metal additive manufacturing of internal flow channels with powder bed fusion processes

This thesis studies the advantages, disadvantages and possibilities of additive manufacturing in making components with internal flow channels. These include hydraulic components, components with cooling channels and heat exchangers. Processes studied in this work are selective laser sintering and selective laser melting of metallic materials. The basic principles of processes and parameters involved in the process are presented and different possibilities of internal channel manufacturing and flow improvement are introduced

Comparison of methods by TLC and HPTLC for determination of aflatoxin M1 in milk and B1 in eggs

Milk and egg matrixes were assayed for aflatoxin M1 (AFM1) and B1 (AFB1) respectively, by AOAC official and modified methods with detection and quantification by thin layer chromatography (TLC) and high performance thin layer chromatography (HPTLC). The modified methods: Blanc followed by Romer, showed to be most appropriate for AFM1 analysis in milk. Both methods reduced emulsion formation, produced cleaner extracts, no streaking spots, precision and accuracy improved, especially when quantification was performed by HPTLC. The use of ternary mixture in the Blanc Method was advantageous as the solvent could extract AFM1 directly from the first stage (extraction), leaving other compounds in the binary mixture layer, avoiding emulsion formation, thus reducing toxin loss. The relative standard deviation (RSD%) values were low, 16 and 7% when TLC and HPTLC were used, with a mean recovery of 94 and 97%, respectively. As far as egg matrix and final extract are concerned, both methods evaluated for AFB1 need further studies. Although that matrix leads to emulsion with consequent loss of toxin, the Romer modified presented a reasonable clean extract (mean recovery of 92 and 96% for TLC and HPTLC, respectively). Most of the methods studied did not performed as expected mainly due to the matrixes high content of triglicerides (rich on saturated fatty acids), cholesterol, carotene and proteins. Although nowadays most methodology for AFM1 is based on HPLC, TLC determination (Blanc and Romer modified) for AFM1 and AFB1 is particularly recommended to those, inexperienced in food and feed mycotoxins analysis and especially who cannot afford to purchase sophisticated (HPLC,HPTLC) instrumentation.

Free and total GMP (glycomacropeptide) contents of milk during bovine lactation

Individual milk samples taken every two weeks from parturition to the end of lactation from 34 animals of three different herds and breeds were analyzed for free-GMP. A milk pool of each herd was analyzed for free and total GMP (released from k-casein by the action of rennin) and the data were correlated with sanitary conditions of animal and udder, phase of lactation and milk production. Most udder problems were concentrated near parturition, with few and spaced occurrences of clinical mastitis. The Californian Mastitis Test (CMT) results showed oscillations compatible with the phases of lactation period and environmental conditions. The widest variations in free-GMP occurred as a function of lactation period and as a consequence of clinical or subclinical mastitis. Higher levels were observed at the beginning of lactation (5.87mg L-1 of sialic acid), becoming normal with mean values of about 3.30mg L-1 at the end of the second month, and increasing again during the final third of lactation. On average, the same trends were observed for total GMP released by commercial rennet, beginning with slightly high values (35.59mg L-1), becoming normal by the sixth month with values close to 27.15mg L-1, and rising gradually up to the end of lactation, with 58.35mg L-1 of sialic acid. These results prove to be useful for the correct interpretation of tests applied to milk selection with respect to proteolytic status or even to restrain frauds by the addition of whey to milk.

Natural radiation levels in powdered milk samples

The control and monitoring of radioactive elements in foodstuffs is fundamental for human health maintenance. This work presents procedures to measure radioactivity levels in powdered milk samples and also a brief discussion of radionuclide transference from the environment to mankind. The measurements were performed utilizing a high-resolution gamma-ray spectrometer using an HPGe detector. The results allowed the quantification of 40K, 137Cs and 208Tl radionuclides. For 40K the average activity was 482 ± 37 Bq/kg and for 137Cs and 208Tl the lower level of detection was, respectively, 3.7 ± 1.1 and 0.5 ± 0.2 (Bq/kg). The results obtained for the milk samples were compared to data found in the literature and to the limits established by the Brazilian National Commission of Nuclear Energy (CNEN) to assure its safety to human consuption.

Antinutrients in the cassava (Manihot esculenta Crantz) leaf powder at three ages of the plant

In Brazil, the cassava leaf meal (CLM) has been used to strive against undernourishment because it is a high source of vitamins and minerals. However, the wide variation in the chemical composition of the different cultivars, as well as their antinutritional substances may be a restriction to their uses. The levels of some antinutrients in CLM from five cultivars at three ages of the plant (TAP) were investigated, in order to select the cultivars and plant ages that would be more appropriate for human consumption. The lowest contents of antinutrients were observed in the 12-month old plants, except for nitrate and hemagglutinin from which the lowest contents were found for the 17 month old ones. The cultivar IAC 289-70 had the lowest antinutrient levels, except for saponin and oxalate. Thus, the cultivar IAC 289-70 at 12 months is the most appropriate for human consumption.

Weldability of powder bed fusion fabricated stainless steel 316L sheets to cold rolled sheet metal

Weldability of powder bed fusion (PBF) fabricated components has come to discussion in past two years due to resent developments in the PBF technology and limited size of the machines used in the fabrication process. This study concentrated on effects of energy input of welding on mechanical properties and microstructural features of welds between PBF fabricated stainless steel 316L sheets and cold rolled sheet metal of same composition by the means of destructive testing and microscopic analysis. Optical fiber diameter, laser power and welding speed were varied during the experiments that were executed following one variable at a time (OVAT) method. One of the problems of welded PBF fabricated components has been lower elongations at break comparing to conventionally manufactured components. Decreasing energy input of the laser keyhole welding decreased elongations at break of the welded specimens. Ultimate tensile strengths were not affected significantly by the energy input of the welding, but fracturing of the specimens welded using high energy input occurred from the weld metal. Fracturing of the lower energy input welds occurred from the PBF fabricated base metal. Energy input was found to be critical factor for mechanical properties of the welds. Multioriented grain growth and formation of neck at fusion zone boundary on the cold rolled side of the weld was detected and suspected to be result from weld pool flows caused by differences in molten weld pool behaviour between the PBF fabricated and cold rolled sides of the welds.

Antibiotic residues in Brazilian UHT milk: a screening study

The aim of this research was to carry out a screening study to check the incidence of antimicrobial residues in Brazilian UHT milk according to rapid yoghurt method. Of the 100 (100%) samples analysed, 96 (96%) showed no traces of antibiotic residues while 4 (4%) indicated probable presence of antibiotic residues. The results suggest that the Brazilian Sanitary Surveillance Agency should apply continuous monitoring programs in order to obtain a safe product offering no health risks to consumers.

Comparison of total phenolic content and antiradical capacity of powders and "chocolates" from cocoa and cupuassu

Polyphenolic compounds seem to be related to the health benefits produced by the cocoa due to their antioxidant properties. Cupuassu powder, prepared from Theobroma grandiflorum seeds, is a very promising cocoa powder substitute. In order to assess the potential health benefits of the cupuassu powder, a comparison was performed between cocoa, chocolate, and cupuassu powders in relation to the content of total phenolic compounds, flavonoids and DPPH scavenging capacity of methanolic extracts. Cupuassu "chocolates" (milk, dark, and white) were also analyzed. Mineral, lipid, protein, and moisture determinations were made in cocoa and cupuassu powders and in cupuassu "chocolates". Results showed that the phenolic contents of cocoa and chocolate powders are more than three times higher than those of cupuassu powder; however, flavonoid contents were significantly lower. The DPPH scavenging capacity varied hugely among the different samples, from 0.5 (white cupuassu "chocolate") to 120 (cocoa powder) μg of Trolox equivalent per 100 g (FW), and presented a significant correlation (r = 0.977) with the total phenolic contents but not with the flavonoid contents (r = -0.035).

Effect of drying method on the adsorption isotherms and isosteric heat of passion fruit pulp powder

The sorption behavior of dry products is generally affected by the drying method. The sorption isotherms are useful to determine and compare thermodynamic properties of passion fruit pulp powder processed by different drying methods. The objective of this study is to analyze the effects of different drying methods on the sorption properties of passion fruit pulp powder. Passion fruit pulp powder was dehydrated using different dryers: vacuum, spray dryer, vibro-fluidized, and freeze dryer. The moisture equilibrium data of Passion Fruit Pulp (PFP) powders with 55% of maltodextrin (MD) were determined at 20, 30, 40 and 50 ºC. The behavior of the curves was type III, according to Brunauer's classification, and the GAB model was fitted to the experimental equilibrium data. The equilibrium moisture contents of the samples were little affected by temperature variation. The spray dryer provides a dry product with higher adsorption capacity than that of the other methods. The vibro-fluidized bed drying showed higher adsorption capacity than that of vacuum and freeze drying. The vacuum and freeze drying presented the same adsorption capacity. The isosteric heats of sorption were found to decrease with increasing moisture content. Considering the effect of drying methods, the highest isosteric heat of sorption was observed for powders produced by spray drying, whereas powders obtained by vacuum and freeze drying showed the lowest isosteric heats of sorption.

Application of mathematical models for the prediction of adsorption isotherms in solid mixture for mango powder refreshment

Solid mixtures for refreshment are already totally integrated to the Brazilian consumers' daily routine, because of their quick preparation method, yield and reasonable price - quite lower if compared to 'ready-to-drink' products or products for prompt consumption, what makes them economically more accessible to low-income populations. Within such a context, the aim of this work was to evaluate the physicochemical and mineral composition, as well as the hygroscopic behavior of four different brands of solid mixture for mango refreshment. The BET, GAB, Oswim and Henderson mathematical models were built through the adjustment of experimental data to the isotherms of adsorption. Results from the physiochemical evaluation showed that the solid mixtures for refreshments are considerable sources of ascorbic acid and reductor sugar; and regarding mineral compounds, they are significant sources of calcium, sodium and potassium. It was also verified that the solid mixtures for refreshments of the four studied brands are considered highly hygroscopic.

Mathematical modeling of microbial growth in milk

A mathematical model to predict microbial growth in milk was developed and analyzed. The model consists of a system of two differential equations of first order. The equations are based on physical hypotheses of population growth. The model was applied to five different sets of data of microbial growth in dairy products selected from Combase, which is the most important database in the area with thousands of datasets from around the world, and the results showed a good fit. In addition, the model provides equations for the evaluation of the maximum specific growth rate and the duration of the lag phase which may provide useful information about microbial growth.

Partial chemical and functional characterization of milk whey products obtained by different processes

Whey protein samples (S-1 to S-5) were tested in vivo and in vitro for nutritional properties and selected bioactivities. Weanling male Wistar rats fed modified AIN-93G (12 g protein.100 g-1) diets for 21 days were used the in vivo studies. The nutritional parameters did not differ among the protein diets tested. Erythrocyte glutathione content was considered high and was higher for S-3, but liver glutathione was the same for all dietary groups. For S-3, cytokine secretion (IL-10 and TNF-α) by human peripheral blood mononuclear cells (in RPMI-1640 medium) was higher in the absence of antigen than in the presence of BCG antigen. Interleukin-4 secretion was repressed in all treatments. The IC50, whey protein concentration required to inhibit 50% of the melanoma cell proliferation, was 2.68 mg.mL-1 of culture medium for the S-3 sample and 3.66 mg.mL-1 for the S-2 sample. Based on these results, it was concluded that S-3 (whey protein concentrate enriched with TGF-β and lactoferrin) produced better nutritional and immunological responses than the other products tested.