Lipocortin 1 mediates the inhibition by dexamethasone of the induction by endotoxin of nitric oxide synthase in the rat.

Administration of Escherichia coli lipopolysaccharide (LPS; 10 mg/kg i.v.) to male Wistar rats caused within 240 min (i) a sustained fall (approximately 30 mmHg) in mean arterial blood pressure, (ii) a reduction (> 75%) in the pressor responses to norepinephrine (1 microgram/kg i.v.), and (iii) an induction of nitric oxide synthase (iNOS) as measured in the lung. Dexamethasone (1 mg/kg i.p. at 2 h prior to LPS) attenuated the hypotension and the vascular hyporeactivity to norepinephrine and reduced (by approximately 77%) the expression of iNOS in the lung. These effects of dexamethasone were prevented by pretreatment of LPS-treated rats with a neutralizing antiserum to lipocortin 1 (anti-LC1; 60 mg/kg s.c. at 24 h prior to LPS) but not by a control nonimmune sheep serum. Stimulation of J774.2 macrophages with LPS (1 microgram/ml for 24 h) caused the expression of iNOS and cyclooxygenase 2 (COX-2) protein and significantly increased nitrite generation; this was prevented by dexamethasone (0.1 microM at 1 h prior to LPS), which also increased cell surface lipocortin 1. Pretreatment of J774.2 cells with anti-LC1 (1:60 dilution at 4 h prior to LPS) also abolished the inhibitory effect of dexamethasone on iNOS expression and nitrite accumulation but not that on COX-2 expression. A lipocortin 1 fragment (residues 1-188 of human lipocortin 1; 20 micrograms/ml at 1 h prior to LPS) also blocked iNOS in J774.2 macrophages activated by LPS (approximately 78% inhibition), and this too was prevented by anti-LC1. We conclude that the extracellular release of endogenous lipocortin 1 (i) mediates the inhibition by dexamethasone of the expression of iNOS, but not of COX-2, and (ii) contributes substantially to the beneficial actions of dexamethasone in rats with endotoxic shock.

Oxide Semiconductors For Organic Opto-electronic Devices

Development of transparent oxide semiconductors (TOS) from Earth-abundant materials is of great interest for cost-effective thin film device applications, such as solar cells, light emitting diodes (LEDs), touch-sensitive displays, electronic paper, and transparent thin film transistors. The need of inexpensive or high performance electrode might be even greater for organic photovoltaic (OPV), with the goal to harvest renewable energy with inexpensive, lightweight, and cost competitive materials. The natural abundance of zinc and the wide bandgap ($sim$3.3 eV) of its oxide make it an ideal candidate. In this dissertation, I have introduced various concepts on the modulations of various surface, interface and bulk opto-electronic properties of ZnO based semiconductor for charge transport, charge selectivity and optimal device performance. I have categorized transparent semiconductors into two sub groups depending upon their role in a device. Electrodes, usually 200 to 500 nm thick, optimized for good transparency and transporting the charges to the external circuit. Here, the electrical conductivity in parallel direction to thin film, i.e bulk conductivity is important. And contacts, usually 5 to 50 nm thick, are optimized in case of solar cells for providing charge selectivity and asymmetry to manipulate the built in field inside the device for charge separation and collection. Whereas in Organic LEDs (OLEDs), contacts provide optimum energy level alignment at organic oxide interface for improved charge injections. For an optimal solar cell performance, transparent electrodes are designed with maximum transparency in the region of interest to maximize the light to pass through to the absorber layer for photo-generation, plus they are designed for minimum sheet resistance for efficient charge collection and transport. As such there is need for material with high conductivity and transparency. Doping ZnO with some common elements such as B, Al, Ga, In, Ge, Si, and F result in n-type doping with increase in carriers resulting in high conductivity electrode, with better or comparable opto-electronic properties compared to current industry-standard indium tin oxide (ITO). Furthermore, improvement in mobility due to improvement on crystallographic structure also provide alternative path for high conductivity ZnO TCOs. Implementing these two aspects, various studies were done on gallium doped zinc oxide (GZO) transparent electrode, a very promising indium free electrode. The dynamics of the superimposed RF and DC power sputtering was utilized to improve the microstructure during the thin films growth, resulting in GZO electrode with conductivity greater than 4000 S/cm and transparency greater than 90 %. Similarly, various studies on research and development of Indium Zinc Tin Oxide and Indium Zinc Oxide thin films which can be applied to flexible substrates for next generation solar cells application is presented. In these new TCO systems, understanding the role of crystallographic structure ranging from poly-crystalline to amorphous phase and the influence on the charge transport and optical transparency as well as important surface passivation and surface charge transport properties. Implementation of these electrode based on ZnO on opto-electronics devices such as OLED and OPV is complicated due to chemical interaction over time with the organic layer or with ambient. The problem of inefficient charge collection/injection due to poor understanding of interface and/or bulk property of oxide electrode exists at several oxide-organic interfaces. The surface conductivity, the work function, the formation of dipoles and the band-bending at the interfacial sites can positively or negatively impact the device performance. Detailed characterization of the surface composition both before and after various chemicals treatment of various oxide electrode can therefore provide insight into optimization of device performance. Some of the work related to controlling the interfacial chemistry associated with charge transport of transparent electrodes are discussed. Thus, the role of various pre-treatment on poly-crystalline GZO electrode and amorphous indium zinc oxide (IZO) electrode is compared and contrasted. From the study, we have found that removal of defects and self passivating defects caused by accumulation of hydroxides in the surface of both poly-crystalline GZO and amorphous IZO, are critical for improving the surface conductivity and charge transport. Further insight on how these insulating and self-passivating defects cause charge accumulation and recombination in an device is discussed. With recent rapid development of bulk-heterojunction organic photovoltaics active materials, devices employing ZnO and ZnO based electrode provide air stable and cost-competitive alternatives to traditional inorganic photovoltaics. The organic light emitting diodes (OLEDs) have already been commercialized, thus to follow in the footsteps of this technology, OPV devices need further improvement in power conversion efficiency and stable materials resulting in long device lifetimes. Use of low work function metals such as Ca/Al in standard geometry do provide good electrode for electron collection, but serious problems using low work-function metal electrodes originates from the formation of non-conductive metal oxide due to oxidation resulting in rapid device failure. Hence, using low work-function, air stable, conductive metal oxides such as ZnO as electrons collecting electrode and high work-function, air stable metals such as silver for harvesting holes, has been on the rise. Devices with degenerately doped ZnO functioning as transparent conductive electrode, or as charge selective layer in a polymer/fullerene based heterojunction, present useful device structures for investigating the functional mechanisms within OPV devices and a possible pathway towards improved air-stable high efficiency devices. Furthermore, analysis of the physical properties of the ZnO layers with varying thickness, crystallographic structure, surface chemistry and grain size deposited via various techniques such as atomic layer deposition, sputtering and solution-processed ZnO with their respective OPV device performance is discussed. We find similarity and differences in electrode property for good charge injection in OLEDs and good charge collection in OPV devices very insightful in understanding physics behind device failures and successes. In general, self-passivating surface of amorphous TCOs IZO, ZTO and IZTO forms insulating layer that hinders the charge collection. Similarly, we find modulation of the carrier concentration and the mobility in electron transport layer, namely zinc oxide thin films, very important for optimizing device performance.

Synthesis of palladium nanoparticles over graphite oxide and carbon nanotubes by reduction in ethylene glycol and their catalytic performance on the chemoselective hydrogenation of para-chloronitrobenzene

Pd nanoparticles have been synthesized over carbon nanotubes (CNT) and graphite oxide (GO) by reduction with ethylene glycol and by conventional impregnation method. The catalysts were tested on the chemoselective hydrogenation of p-chloronitrobenzene and the effect of the synthesis method and surface chemistry on their catalytic performance was evaluated. The catalysts were characterized by N2 adsorption/desorption isotherms at 77 K, TEM, powder X-ray diffraction, thermogravimetry, infrared and X-ray photoelectron spectroscopy and ICP-OES. It was observed that the synthesis of Pd nanoparticles employing ethylene glycol resulted in metallic palladium particles of smaller size compared to those prepared by the impregnation method and similar for both supports. The presence of oxygen groups on the support surface favored the activity and diminished the selectivity. It seems that ethylene glycol reacted with the surface groups of GO, this favoring the selectivity. The activity was higher over the CNT-based catalysts and both catalysts prepared by reduction in ethylene glycol were quite stable upon recycling.

Chemical composition of the chalcophanite rich surface of an encrusted rock ashore Lake Macquarie, Australia

Mineralogical interest in the nature of manganese oxide particulates in natural marine water (Suess, 1979), natural lake water (Klaveness, 1977), and simulated lake water (Giovanoli, 1980), prompted a search for such particulates in a large New South Wales coastal lake. The investigated waters did show the existence of manganese oxide replacement phenomena in fragmentary sedimentary rocks near the south margin of Lake Macquarie. The black crusts of manganese oxide discovered on rocks close to the waterline have revealed a three layers structure. Layer A (0-35 micron), adjacent to the rock, is composed essentially of kaolinite of weathering origin, together with low levels of manganese oxide without detectable Zn. Layer B (35-80 micron) follows as a manganese oxide layer containing admixed kaolinite and low amounts of Zn. Layer C (80-130 micron) is the closest to the surface and is made of Chalcophanite containing 10-15% of ZnO.

Geochemistry and microfossil content of surface sediments from the Equatorial Atlantic in samples 207 to 310 from the Meteor expedition in 1925

Als Alfred Merz mich aufforderte, die sedimentpetrographische Bearbeitung der "Meteor"-Expedition zu übernehmen, schwebte mir von vornherein als Ziel vor, die Sedimente nicht nur in größerer Zahl als bisher und im Zusammenhang mit den übrigen Wissenschaften vom Meer nach den bisherigen Untersuchungsmethoden zu beschreiben. Es war mir klar, daß neue Ergebnisse nur zu erwarten waren, wenn die Untersuchung der Sedimente und damit ihre Beschreibung auf Grund vertiefter und neuer Methoden unternommen wurde. Ich erhoffte von einer solchen verfeinerten Beschreibung auch ein klareres Bild der Abhängigkeit der Sedimente von ihrer Umwelt. Wir werden diese Abhängigkeit nur verstehen, wenn wir die allgemeinen Gesetzmäßigkeiten herausarbeiten können. Diese werden dann auch eine Anwendung auf andere Sedimente ermöglichen. Für solche Untersuchungen sind Tiefseesedimente günstig, weil wir bei ihnen relativ einfache Bildungsumstände haben, einfacher jedenfalls, als es in der Flachsee im allgemeinen der Fall ist, ungünstig aber, weil diese Umwelteinflüsse weniger bekannt und schwerer zu erforschen sind und die Auswahl der Untersuchungspunkte nicht nach sedimentpetrographischen Gesichtspunkten erfolgen konnte. Die ersten Jahre nach der Rückkehr von der Expedition wurden deshalb auf methodische Untersuchungen verwandt. Insbesondere kam es mir darauf an herauszubekommen, wie die feinsten Bestandteile der Sedimente zusammengesetzt sind. Diese "tonigen" Bestandteile bilden nicht nur den wesentlichen Anteil der Roten Tone und der Blauschlicke, wir finden sie auch, durch Kalk verdünnt, in den Globigerinenschlämmen wieder. Sie sind von der Wissenschaft bisher recht stiefmütterlich behandelt worden. Die Ausarbeitung der Methoden, die gerade auf diesem Gebiet Neuland betreten mußte, ließ sich nicht rasch erzwingen. Es kam hinzu, daß ich mir in Rostock erst meine Arbeitsmöglichkeiten schaffen mußte. Ich habe hier der Notgemeinschaft der Deutschen Wissenschaft und der Mecklenburgischen Regierung für ihre Unterstützung mit Apparaten und Personal wärmstens zu danken. Ferner mußte als Vorbedingung für die Deutung der Sedimente zunächst festgestellt werden, zu welchen geologischen Zeiten sie gebildet worden sind und wie groß ihre Bildungsgeschwindigkeit überhaupt ist. Diese Untersuchungen hat W. Schott mit Hilfe der Foraminiferenfaunen als Notgemeinschaftsstipendiat durchgeführt. Diese Vorarbeiten, insbesondere der Ausbau der Methoden, hatten den Nachteil, daß die Veröffentlichung der Ergebnisse nicht so rasch erfolgen konnte, wie ich es selbst gewünscht hätte. Bald nachdem die Darstellung der Methoden und die Foraminiferenuntersuchungen als erste Lieferung erschienen waren, stellte es sich als notwendig heraus, eine beträchtliche Kürzung des restlichen Teiles vorzunehmen. Das hat zur Folge, daß die erste Lieferung breiter dargestellt ist als die Ergebnisse. Als die Nachricht von der Kürzung und dem notwendigen raschen Abschluß des Werkes mir bekannt wurde (Januar 1935), mußte eine Reihe von Untersuchungen eingestellt werden, insbesondere mikroskopische Untersuchungen, die besonders viel Zeit und in der Darstellung viel Raum beanspruchen. Deshalb ist systematisch nur das Guinea-Becken durch V. Leinz und das Kapverden-Becken durch O. E. Radczewski untersucht worden.

Long-term in vivo biostability of poly(dimethylsiloxane) / poly(hexamethylene oxide) mixed macrodiol-based polyurethane elastomers

The long-term biostability of a novel thermoplastic polyurethane elastomer (Elast-Eon(TM) 2 80A) synthesized using poly(hexamethylene oxide) (PHMO) and poly(dimethylsiloxane) (PDMS) macrodiols has been studied using an in vivo ovine model. The material's biostability was compared with that of three commercially available control materials, Pellethane(R) 2363-80A, Pellethane(R) 2363-55D and Bionate(R) 55D, after subcutaneous implantation of strained compression moulded flat sheet dumbbells in sheep for periods ranging from 3 to 24 months. Scanning electron microscopy, attenuated total reflectance-Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy were used to assess changes in the surface chemical structure and morphology of the materials. Gel permeation chromatography, differential scanning calorimetry and tensile testing were used to examine changes in bulk characteristics of the materials. The results showed that the biostability of the soft flexible PDMS-based test polyurethane was significantly better than the control material of similar softness, Pellethane(R) 80A, and as good as or better than both of the harder commercially available negative control polyurethanes. Pellethane(R) 55D and Bionate(R) 55D. Changes observed in the surface of the Pellethane(R) materials were consistent with oxidation of the aliphatic polyether soft segment and hydrolysis of the urethane bonds joining hard to soft segment with degradation in Pellethane(R) 80A significantly more severe than that observed in Pellethane(R) 55D. Very minor changes were seen on the surfaces of the Elast-Eon(TM) 2 80A and Bionate(R) 55D materials. There was a general trend of molecular weight decreasing with time across all polymers and the molecular weights of all materials decreased at a similar relative rate. The polydispersity ratio, M-w/M-n, increased with time for all materials. Tensile tests indicated that UTS increased in Elast-Eon(TM) 2 80A and Bionate(R) 55D following implantation under strained conditions. However, ultimate strain decreased and elastic modulus increased in the explanted specimens of all three materials when compared with their unimplanted unstrained counterparts. The results indicate that a soft, flexible PDMS-based polyurethane synthesized using 20% PHMO and 80% PDMS macrodiols has excellent long-term biostability compared with commercially available polyurethanes. (C) 2004 Elsevier Ltd. All rights reserved.

Synthesis and electrochemical properties of mesoporous nickel oxide

Mesoporous Ni(OH)(2) is synthesized using sodium dodecyl sulfate as a template and urea as a hydrolysis-controlling agent. Mesoporous NiO with a centralized pore-size distribution is obtained by calcining Ni(OH)(2) at different temperatures. The BET specific surface area reaches 477.7 m(2) g(-1) for NiO calcined at 250 degreesC. Structure characterizations indicate a good mesoporous structure for the nickel oxide samples. Cyclic voltammetry shows the NiO to have good capacitive behaviour due to its unique mesoporous structure when using a large amount of NiO to fabricate the electrode. Compared with NiO prepared by dip-coating and cathodic precipitation methods, mesoporous NiO with a controlled pore structure can be used in much larger amounts to fabricate electrodes and still maintain a high specific capacitance and good capacitive behaviour. (C) 2004 Elsevier B.V. All rights reserved.

Synthesis of wormlike nanoporous nickel oxide with nanocrystalline framework for electrochemical energy storage

In this work, nanoporous nickel oxide was synthesized using anionic surfactant assembly method. Structure characterizations show that this nickel oxide possesses partly-ordered mesoporous structure with nanocrystalline pore wall. The formation mechanism of wormlike nanoporous structure is ascribed to the quasi-reverse micelle system formed by ternary phases of SDS (sodium dodecyl sulfate)/urea/water. Cyclic voltammetry shows that these nickel oxide samples possess both good capacitive behavior due to its unique nanoporous structure and very high specific capacitance due to its high surface area with electrochemical activity.

Synthesis and characterization of mesoporous nickel oxide and its application to electrochemical capacitor

Mesoporous Ni(OH)(2) was synthesized using cationic surfactant as template and urea as hydrolysis-controlling agent. Mesoporous NiO with centralized pore size distribution was obtained by calcining Ni(OH)(2) at different temperatures. The BET specific surface area reaches 477.7 m(2).g(-1) for NiO calcined at 523 K. Structure characterizations indicate the polycrystalline pore wall of mesoporous nickel oxide. The pore-formation mechanism is also deduced to be quasi-reverse micelle mechanism. Cyclic voltammetry shows the good capacitive behavior of these NiO samples due to its unique mesoporous structure when using large amount of NiO to fabricate electrode. Compared with NiO prepared by dip-coating and cathodic precipitation methods, this mesoporous NiO with controlled pore structure can be used in much larger amount to fabricate the electrode and still maintains high specific capacitance and good capacitive behavior.

Synthesis and structure characterization of chromium oxide prepared by solid thermal decomposition reaction

Mesoporous chromium oxide (Cr2O3) nanocrystals were first synthesized by the thermal decomposition reaction of Cr(NO3)(3)(circle)9H(2)O using citric acid monohydrate (CA) as the mesoporous template agent. The texture and chemistry of chromium oxide nanocrystals were characterized by N-2 adsorption-desorption isotherms, FTIR, X-ray diffraction (XRD), UV-vis, and thermoanalytical methods. It was shown that the hydrate water and CA are the crucial factors in influencing the formation of mesoporous Cr2O3 nanocrystals in the mixture system. The decomposition of CA results in the formation of a mesoporous structure with wormlike pores. The hydrate water of the mixture provides surface hydroxyls that act as binders, making the nanocrystals aggregate. The pore structures and phases of chromium oxide are affected by the ratio of precursor-to-CA, thermal temperature, and time.