Deconvolution of magnetic acoustic change complex (mACC)

Objective: The aim of this study was to design a novel experimental approach to investigate the morphological characteristics of auditory cortical responses elicited by rapidly changing synthesized speech sounds. Methods: Six sound-evoked magnetoencephalographic (MEG) responses were measured to a synthesized train of speech sounds using the vowels /e/ and /u/ in 17 normal hearing young adults. Responses were measured to: (i) the onset of the speech train, (ii) an F0 increment; (iii) an F0 decrement; (iv) an F2 decrement; (v) an F2 increment; and (vi) the offset of the speech train using short (jittered around 135. ms) and long (1500. ms) stimulus onset asynchronies (SOAs). The least squares (LS) deconvolution technique was used to disentangle the overlapping MEG responses in the short SOA condition only. Results: Comparison between the morphology of the recovered cortical responses in the short and long SOAs conditions showed high similarity, suggesting that the LS deconvolution technique was successful in disentangling the MEG waveforms. Waveform latencies and amplitudes were different for the two SOAs conditions and were influenced by the spectro-temporal properties of the sound sequence. The magnetic acoustic change complex (mACC) for the short SOA condition showed significantly lower amplitudes and shorter latencies compared to the long SOA condition. The F0 transition showed a larger reduction in amplitude from long to short SOA compared to the F2 transition. Lateralization of the cortical responses were observed under some stimulus conditions and appeared to be associated with the spectro-temporal properties of the acoustic stimulus. Conclusions: The LS deconvolution technique provides a new tool to study the properties of the auditory cortical response to rapidly changing sound stimuli. The presence of the cortical auditory evoked responses for rapid transition of synthesized speech stimuli suggests that the temporal code is preserved at the level of the auditory cortex. Further, the reduced amplitudes and shorter latencies might reflect intrinsic properties of the cortical neurons to rapidly presented sounds. Significance: This is the first demonstration of the separation of overlapping cortical responses to rapidly changing speech sounds and offers a potential new biomarker of discrimination of rapid transition of sound.

Implementação em FPGA de módulo de efeito de reverberação

Reverberation is caused by the reflection of the sound in adjacent surfaces close to the sound source during its propagation to the listener. The impulsive response of an environment represents its reverberation characteristics. Being dependent on the environment, reverberation takes to the listener characteristics of the space where the sound is originated and its absence does not commonly sounds like “natural”. When recording sounds, it is not always possible to have the desirable characteristics of reverberation of an environment, therefore methods for artificial reverberation have been developed, always seeking a more efficient implementations and more faithful to the real environments. This work presents an implementation in FPGAs (Field Programmable Gate Arrays ) of a classic digital reverberation audio structure, based on a proposal of Manfred Schroeder, using sets of all-pass and comb filters. The developed system exploits the use of reconfigurable hardware as a platform development and implementation of digital audio effects, focusing on the modularity and reuse characteristics

Uma abordagem para avaliação e tratamento de exceções propagadas no uso de serviços Web em .Net

High dependability, availability and fault-tolerance are open problems in Service-Oriented Architecture (SOA). The possibility of generating software applications by integrating services from heterogeneous domains, in a reliable way, makes worthwhile to face the challenges inherent to this paradigm. In order to ensure quality in service compositions, some research efforts propose the adoption of verification techniques to identify and correct errors. In this context, exception handling is a powerful mechanism to increase SOA quality. Several research works are concerned with mechanisms for exception propagation on web services, implemented in many languages and frameworks. However, to the extent of our knowledge, no works found evaluates these mechanisms in SOA with regard to the .NET framework. The main contribution of this paper is to evaluate and to propose exception propagation mechanisms in SOA to applications developed within the .NET framework. In this direction, this work: (i)extends a previous study, showing the need to propose a solution to the exception propagation in SOA to applications developed in .NET, and (ii) show a solution, based in model obtained from the results found in (i) and that will be applied in real cases through of faults injections and AOP techniques.

SLA-Based Guidelines for Database Transitioning

Component-based Software Engineering (CBSE) and Service-Oriented Architecture (SOA) became popular ways to develop software over the last years. During the life-cycle of a software system, several components and services can be developed, evolved and replaced. In production environments, the replacement of core components, such as databases, is often a risky and delicate operation, where several factors and stakeholders should be considered. Service Level Agreement (SLA), according to ITILv3’s official glossary, is “an agreement between an IT service provider and a customer. The agreement consists on a set of measurable constraints that a service provider must guarantee to its customers.”. In practical terms, SLA is a document that a service provider delivers to its consumers with minimum quality of service (QoS) metrics.This work is intended to assesses and improve the use of SLAs to guide the transitioning process of databases on production environments. In particular, in this work we propose SLA-Based Guidelines/Process to support migrations from a relational database management system (RDBMS) to a NoSQL one. Our study is validated by case studies.

REST SERVER IN JOLIE - Practical Case

The aim of this thesis is to merge two of the emerging paradigms about web programming: RESTful Web Development and Service-Oriented Programming. REST is the main architectural paradigm about web applications, they are characterised by procedural structure which avoid the use of handshaking mechanisms. Even though REST has a standard structure to access the resources of the web applications, the backend side is usually not very modular if not complicated. Service-Oriented Programming, instead, has as one of the fundamental principles, the modularisation of the components. Service-Oriented Applications are characterised by separate modules that allow to simplify the devel- opment of the web applications. There are very few example of integration between these two technologies: it seems therefore reasonable to merge them. In this thesis the methodologies studied to reach this results are explored through an application that helps to handle documents and notes among several users, called MergeFly. The MergeFly practical case, once that all the specifics had been set, will be utilised in order to develop and handle HTTP requests through SOAP. In this document will be first defined the 1) characteristics of the application, 2) SOAP technology, partially introduced the 3) Jolie Language, 4) REST and finally a 5) Jolie-REST implementation will be offered through the MergeFly case. It is indeed implemented a token mechanism for authentication: it has been first discarded sessions and cookies algorithm of authentication in so far not into the pure RESTness theory, even if often used). In the final part the functionality and effectiveness of the results will be evaluated, judging the Jolie-REST duo.

Functionals for TDDFT description of electron transport in nanostructures

La Teoria di Densità Funzionale (DFT) e la sua versione dipendente dal tempo (TDDFT) sono strumenti largamente usati per simulare e calcolare le proprietà statiche e dinamiche di sistemi con elettroni interagenti. La precisione del metodo si basa su una serie di approssimazioni degli effetti di exchange correlation fra gli elettroni, descritti da un funzionale della sola densità di carica. Nella presente tesi viene testata l'affidabilità del funzionale Mixed Localization Potential (MLP), una media pesata fra Single Orbital Approximation (SOA) e un potenziale di riferimento, ad esempio Local Density Approximation (LDA). I risultati mostrano capacità simulative superiori a LDA per i sistemi statici (curando anche un limite di LDA noto in letteratura come fractional dissociation) e dei progressi per sistemi dinamici quando si sviluppano correnti di carica. Il livello di localizzazione del sistema, inteso come la capacità di un elettrone di tenere lontani da sé altri elettroni, è descritto dalla funzione Electron Localization Function (ELF). Viene studiato il suo ruolo come guida nella costruzione e ottimizzazione del funzionale MLP.

Efeitos da internacionalização no desvio da estrutura de capital alvo e na velocidade de ajuste

This dissertation investigates the effects of internationalization in two gaps related to the capital structure that have not been discussed by the Brazilian literature yet. To this, were developed two independent sections. The first examined what the effects of internationalization on the deviation from the target capital structure. The second examined what the effects of internationalization on speed of adjustment (SOA) of the capital structure. It used data from Brazil, multinational and domestic companies, from 2006 to 2014. The results of the first analysis indicate that internationalization helps reduce the difference between the target and the current debt. That is, to the extent that the level of internationalization increases; whether only export or a combination of export, assets and employees abroad, the gap between the current structure and the target structure decreases. This reduction is given as a function of internationalization as a consequence of the upstream effect of the upstream-downstream hypothesis. Thus, as the Market Timing theory, it can be seen as an opportunity for adjustment of the capital structure, and with the reduction of deviation, there is also a reduction in the cost of capital of the firm. The result of the second analysis indicates that internationalization is able to significantly increase the speed adjustment, ensuring for the multinational a faster adjustment of its capital structure. Exports increase the SOA in 9 to 23%. And when also kept active assets and employees abroad the increase is 8 to 20%. In terms of time, while domestic company takes more than three years to reduce half of the deviation that has, while multinacional companies take on average one and a half year to reduce the same proportion of the deviation. The validity of the upstream-downstream hypothesis for the effect of internationalization in SOA was confirmed by comparing the results for US companies. Thus, the phenomenon of internationalization increases SOA when companies are from less stable markets, such as Brazil; and it has a less significcative effect when companies are derived from more stable markets, because they already have a high speed of adjustmennt. In addition, the adequacy analysis of the estimators also showed the model pooled OLS (Ordinary Least Squares) presents the highest quality in predicting the SOA than the system GMM (Generalized Method of Moments). For future studies it is suggested to analyze the effect of international event, by itself, and to validate the hypothesis using samples of different markets and the use of other estimators.

Dark soliton generation from semiconductor optical amplifier gain medium in ring fiber configuration

We have investigated the mode-lock operation from a semiconductor optical amplifier (SOA) gain chip in the ring fibre configuration. At lower pump currents, the laser generates dark soliton pulses both at the fundamental repetition rate of 39 MHz and supports up to the 6th harmonic order corresponding to 234-MHz repetition rate with an output power of ∼2.1 mW. At higher pump currents, the laser can be switched between the bright, dark and concurrent bright and dark soliton generation regimes.

Gas/particle partitioning of carbonyls in the photooxidation of isoprene and 1,3,5-trimethylbenzene

A new denuder-filter sampling technique has been used to investigate the gas/particle partitioning behaviour of the carbonyl products from the photooxidation of isoprene and 1,3,5-trimethylbenzene. A series of experiments was performed in two atmospheric simulation chambers at atmospheric pressure and ambient temperature in the presence of NOx and at a relative humidity of approximately 50%. The denuder and filter were both coated with the derivatizing agent O-(2,3,4,5,6-pentafluorobenzyl)-hydroxylamine (PFBHA) to enable the efficient collection of gas- and particle-phase carbonyls respectively. The tubes and filters were extracted and carbonyls identified as their oxime derivatives by GC-MS. The carbonyl products identified in the experiments accounted for around 5% and 10% of the mass of secondary organic aerosol formed from the photooxidation of isoprene and 1,3,5-trimethylbenzene respectively. Experimental gas/particle partitioning coefficients were determined for a wide range of carbonyl products formed from the photooxidation of isoprene and 1,3,5-trimethylbenzene and compared with the theoretical values based on standard absorptive partitioning theory. Photooxidation products with a single carbonyl moiety were not observed in the particle phase, but dicarbonyls, and in particular, glyoxal and methylglyoxal, exhibited gas/particle partitioning coefficients several orders of magnitude higher than expected theoretically. These findings support the importance of heterogeneous and particle-phase chemical reactions for SOA formation and growth during the atmospheric degradation of anthropogenic and biogenic hydrocarbons.

Investigation into a best practice model for providing an integrated user experience with mobile cloud applications

Mobile Cloud Computing promises to overcome the physical limitations of mobile devices by executing demanding mobile applications on cloud infrastructure. In practice, implementing this paradigm is difficult; network disconnection often occurs, bandwidth may be limited, and a large power draw is required from the battery, resulting in a poor user experience. This thesis presents a mobile cloud middleware solution, Context Aware Mobile Cloud Services (CAMCS), which provides cloudbased services to mobile devices, in a disconnected fashion. An integrated user experience is delivered by designing for anticipated network disconnection, and low data transfer requirements. CAMCS achieves this by means of the Cloud Personal Assistant (CPA); each user of CAMCS is assigned their own CPA, which can complete user-assigned tasks, received as descriptions from the mobile device, by using existing cloud services. Service execution is personalised to the user's situation with contextual data, and task execution results are stored with the CPA until the user can connect with his/her mobile device to obtain the results. Requirements for an integrated user experience are outlined, along with the design and implementation of CAMCS. The operation of CAMCS and CPAs with cloud-based services is presented, specifically in terms of service description, discovery, and task execution. The use of contextual awareness to personalise service discovery and service consumption to the user's situation is also presented. Resource management by CAMCS is also studied, and compared with existing solutions. Additional application models that can be provided by CAMCS are also presented. Evaluation is performed with CAMCS deployed on the Amazon EC2 cloud. The resource usage of the CAMCS Client, running on Android-based mobile devices, is also evaluated. A user study with volunteers using CAMCS on their own mobile devices is also presented. Results show that CAMCS meets the requirements outlined for an integrated user experience.

Enhanced Volatile Organic Compounds emissions and organic aerosol mass increase the oligomer content of atmospheric aerosols

Secondary organic aerosol (SOA) accounts for a dominant fraction of the submicron atmospheric particle mass, but knowledge of the formation, composition and climate effects of SOA is incomplete and limits our understanding of overall aerosol effects in the atmosphere. Organic oligomers were discovered as dominant components in SOA over a decade ago in laboratory experiments and have since been proposed to play a dominant role in many aerosol processes. However, it remains unclear whether oligomers are relevant under ambient atmospheric conditions because they are often not clearly observed in field samples. Here we resolve this long-standing discrepancy by showing that elevated SOA mass is one of the key drivers of oligomer formation in the ambient atmosphere and laboratory experiments. We show for the first time that a specific organic compound class in aerosols, oligomers, is strongly correlated with cloud condensation nuclei (CCN) activities of SOA particles. These findings might have important implications for future climate scenarios where increased temperatures cause higher biogenic volatile organic compound (VOC) emissions, which in turn lead to higher SOA mass formation and significant changes in SOA composition. Such processes would need to be considered in climate models for a realistic representation of future aerosol-climate-biosphere feedbacks.

Intrakavitäts-Absorptionsspektroskopie von Spurengasen mit hoher Sensitivität und Selektivität auf Basis konkurrierender Moden eines Halbleiterlasers

Die Validität des Sensorkonzeptes aus dem Patent von Prof. H. Hillmer wird unter Verwendung einer gasförmigen Testsubstanz gezeigt. Zu diesem Zweck wird ein bestehender Messaufbau durch zahlreiche Verbesserungen optimiert. Die optischen Eigenschaften der verwendeten Komponenten und der resultierenden modifizierten Aufbauten werden dargelegt. Die bisherigen faserbasierter Messaufbauten werden zu einem symmetrischen Messaufbau mit verbesserter spektraler Auflösung und vereinfachter Handhabung erweitert. Die Vorlaufzeiten, die zuvor ein maßgebliches Problem darstellte, wurde deutlich reduziert. Die spektralen Eigenschaften des überarbeiteten Lasersystems werden detailliert erfasst und dargestellt. Der asymmetrische Messaufbau erreicht minimale Halbwertsbreiten von 0,04 ± 0,02 nm, bei einem Seitenmodenunterdrückungsverhältnis von 26,9 ± 0,9 dB und weist einen Schwellstrom von 361,55 mA auf. Der symmetrische Aufbau erreicht Halbwertsbreiten von 0,04 ± 0,02 nm, ein Seitenmodenunterdrückungsverhältnis von 49,45 ± 0,05 nm und weist einen Schwellstrom von 261,25 mA auf. Durch die Erweiterung des Systems zum symmetrischen Messaufbau wird es möglich, die Positionen der Wellenlängen frei zu wählen, wohingegen im asymmetrischen Messaufbau die Wellenlänge der äußeren Kavität immer näher am Maximum der Verstärkungskurve des SOA gewählt werden muss. Mit beiden System werden Messungen mit unterschiedlichen Stoffmengen von Acetylen mit unterschiedlichen Abständen zwischen den Laserlinien durchgeführt. Obwohl eine vergleichsweise schwache Absorptionslinie von Acetylen für die Messungen gewählt wurde, zeigen beide Systeme eine instantane Änderung der Intensitäten der Laserlinien bei einer Änderung der Stoffmenge im Resonator. Die Laserlinie, die von der Absorption von Acetylen betroffen ist, nimmt ab, wohingegen die Intensität der zweiten Laserlinie zunimmt. Es wird erstmals gezeigt, dass eine Leistungsübertragung zwischen den Laserlinien stattfindet. Die Reaktion beider Systeme ist stark vom Abstand der Laserlinien zueinander abhängig, wodurch eine genaue Bestimmung der Sensitivität nicht durchgeführt wird.

Event Monitoring Web Services for Heterogeneous Information Systems

Heterogeneity has to be taken into account when integrating a set of existing information sources into a distributed information system that are nowadays often based on Service- Oriented Architectures (SOA). This is also particularly applicable to distributed services such as event monitoring, which are useful in the context of Event Driven Architectures (EDA) and Complex Event Processing (CEP). Web services deal with this heterogeneity at a technical level, also providing little support for event processing. Our central thesis is that such a fully generic solution cannot provide complete support for event monitoring; instead, source specific semantics such as certain event types or support for certain event monitoring techniques have to be taken into account. Our core result is the design of a configurable event monitoring (Web) service that allows us to trade genericity for the exploitation of source specific characteristics. It thus delivers results for the areas of SOA, Web services, CEP and EDA.

Event Monitoring Based On Web Services for Heterogeneous Event Sources

This article discusses event monitoring options for heterogeneous event sources as they are given in nowadays heterogeneous distributed information systems. It follows the central assumption, that a fully generic event monitoring solution cannot provide complete support for event monitoring; instead, event source specific semantics such as certain event types or support for certain event monitoring techniques have to be taken into account. Following from this, the core result of the work presented here is the extension of a configurable event monitoring (Web) service for a variety of event sources. A service approach allows us to trade genericity for the exploitation of source specific characteristics. It thus delivers results for the areas of SOA, Web services, CEP and EDA.

Techniques en appui des formats de modulation avancés pour les futurs réseaux optiques

Les systèmes de communication optique avec des formats de modulation avancés sont actuellement l’un des sujets de recherche les plus importants dans le domaine de communication optique. Cette recherche est stimulée par les exigences pour des débits de transmission de donnée plus élevés. Dans cette thèse, on examinera les techniques efficaces pour la modulation avancée avec une détection cohérente, et multiplexage par répartition en fréquence orthogonale (OFDM) et multiples tonalités discrètes (DMT) pour la détection directe et la détection cohérente afin d’améliorer la performance de réseaux optiques. Dans la première partie, nous examinons la rétropropagation avec filtre numérique (DFBP) comme une simple technique d’atténuation de nonlinéarité d’amplificateur optique semiconducteur (SOA) dans le système de détection cohérente. Pour la première fois, nous démontrons expérimentalement l’efficacité de DFBP pour compenser les nonlinéarités générées par SOA dans un système de détection cohérente porteur unique 16-QAM. Nous comparons la performance de DFBP avec la méthode de Runge-Kutta quatrième ordre. Nous examinons la sensibilité de performance de DFBP par rapport à ses paramètres. Par la suite, nous proposons une nouvelle méthode d’estimation de paramètre pour DFBP. Finalement, nous démontrons la transmission de signaux de 16-QAM aux taux de 22 Gbaud sur 80km de fibre optique avec la technique d’estimation de paramètre proposée pour DFBP. Dans la deuxième partie, nous nous concentrons sur les techniques afin d’améliorer la performance des systèmes OFDM optiques en examinent OFDM optiques cohérente (CO-OFDM) ainsi que OFDM optiques détection directe (DDO-OFDM). Premièrement, nous proposons une combinaison de coupure et prédistorsion pour compenser les distorsions nonlinéaires d’émetteur de CO-OFDM. Nous utilisons une interpolation linéaire par morceaux (PLI) pour charactériser la nonlinéarité d’émetteur. Dans l’émetteur nous utilisons l’inverse de l’estimation de PLI pour compenser les nonlinéarités induites à l’émetteur de CO-OFDM. Deuxièmement, nous concevons des constellations irrégulières optimisées pour les systèmes DDO-OFDM courte distance en considérant deux modèles de bruit de canal. Nous démontrons expérimentalement 100Gb/s+ OFDM/DMT avec la détection directe en utilisant les constellations QAM optimisées. Dans la troisième partie, nous proposons une architecture réseaux optiques passifs (PON) avec DDO-OFDM pour la liaison descendante et CO-OFDM pour la liaison montante. Nous examinons deux scénarios pour l’allocations de fréquence et le format de modulation des signaux. Nous identifions la détérioration limitante principale du PON bidirectionnelle et offrons des solutions pour minimiser ses effets.