917 resultados para Production of Subjectivity
Resumo:
Preliminary studies on the long-term effects of prenatal and early postnatal irradiation on the immune response to arsonate were performed using A/J mice. Pregnant mice were irradiated (0·5 Gy, X-rays) or sham-irradiated on a single occasion during gestation (between day 5 and 18 post-conception). Alternatively, newborn mice received the same treatment between day 2 and 7 after birth. Mice were immunized with keyhole limpet haemocyanin-arsonate (KLH-Ars) in adjuvant from 2 months after birth. The levels of specific antibodies to arsonate (anti-Ars) were measured by radioimmunoassay. In addition, the Ars-related cross-reactive idiotype (CRIA) was measured by the haemagglutination technique. In the primary response the titre of anti-Ars was reduced in animals that had been irradiated between day 12 and 15 of gestation. In the second response, in contrast, they had increased levels of anti-Ars. After immunization with KLH-Ars, high levels of CRIA were observed in all groups. However, in mice irradiated 18-20 days after conception the level of CRIA was often much higher than the level of anti-Ars, indicating that a large proportion of the CRIA-positive molecules were not specific for Ars. Thus, in this particular case, some specificity of the immune response was lost after irradiation. The expression of recurrent idiotypes may be a sensitive indicator of immunological perturbations after irradiation. © 1988 Informa UK Ltd All rights reserved: reproduction in whole or part not permitted.
Resumo:
A study of proton-proton collisions in which two b hadrons are produced in association with a Z boson is reported. The collisions were recorded at a centre-of-mass energy of 7TeV with the CMS detector at the LHC, for an integrated luminosity of 5:2 fb-1. The b hadrons are identified by means of displaced secondary vertices, without the use of reconstructed jets, permitting the study of b-hadron pair production at small angular separation. Differential cross sections are presented as a function of the angular separation of the b hadrons and the Z boson. In addition, inclusive measurements are presented. For both the inclusive and differential studies, different ranges of Z boson momentum are considered, and each measurement is compared to the predictions from different event generators at leading-order and next-to-leading-order accuracy. Copyright CERN.
Resumo:
Nano-imprint forming (NIF) as manufacturing technology is ideally placed to enable high resolution, low-cost and high-throughput fabrication of three-dimensional fine structures and the packaging of heterogeneous micro-systems (S.Y. Chou and P.R. Krauss, 1997). This paper details a thermo-mechanical modelling methodology for optimising this process for different materials used in components such as mini-fluidics and bio-chemical systems, optoelectronics, photonics and health usage monitoring systems (HUMS). This work is part of a major UK Grand Challenge project - 3D-Mintegration - which is aiming to develop modelling and design technologies for the next generation of fabrication, assembly and test processes for 3D-miniaturised systems.
Resumo:
The concomitant recycling of waste and carbon dioxide emissions is the subject of developing technology designed to close the industrial process loop and facilitate the bulk-re-use of waste in, for example, construction. The present work discusses a treatment step that employs accelerated carbonation to convert gaseous carbon dioxide into solid calcium carbonate through a reaction with industrial thermal residues. Treatment by accelerated carbonation enabled a synthetic aggregate to be made from thermal residues and waste quarry fines. The aggregates produced had a bulk density below 1000 kg/m3 and a high water absorption capacity. Aggregate crushing strengths were between 30% and 90% stronger than the proprietary lightweight expanded clay aggregate available in the UK. Cast concrete blocks containing the carbonated aggregate achieve compressive strengths of 24 MPa, making them suitable for use with concrete exposed to non-aggressive service environments. The energy intensive firing and sintering processes traditionally required to produce lightweight aggregates can now be augmented by a cold-bonding, low energy method that contributes to the reduction of green house gases to the atmosphere.
Resumo:
Seasonal changes in the abundance, size and occurrence of furciliae of Euphausia krohni (Brandt), Nematoscelis megalops (G. O. Sars) and Thysanoessa gregaria G. O. Sars are described from samples taken at 10 m depth with the Continuous Plankton Recorder (CPR) over a period of 2 yr (January 1966 to December 1967) in the North Atlantic Ocean. E. krohni and T. gregaria were found to breed through most of the year but N. megalops bred only in spring and summer. Annual mean biomass was calculated directly from the data and production was estimated from published P:B ratios. The seasonal occurrences of E. brevis Hansen, E. hemigibba Hansen, E. mutica Hansen, E. tenera Hansen, Stylocheiron longicorne G. O. Sars, S. maximum Hansen, Thysanopoda acutifrons Holt and Tattershall and T. aequalis Hansen in the samples are described.
Resumo:
Geographical variations in the numbers, biomass and production of euphausiids and the contribution of common species to the total are described from samples taken during 1966 and 1967 in the North Atlantic Ocean and the North Sea by the Continuous Plankton Recorder at 10 m depth. Euphausiids were most abundant in the central and western North Atlantic Ocean and the Norwegian Sea. Thysanoessa longicaudata (Krøyer) was numerically dominant. Biomass was greatest in the Norwegian Sea and the north-eastern North Sea where Meganyctiphanes norvegica (M. Sars) accounted for 81 and 59%, respectively, of the total biomass. Production was highest off Nova Scotia and in Iberian coastal waters; the dominant species were T. raschi (M. Sars) in the former area and Nyctiphanes couchi (Bell) in the latter. The mean P:B ratios were correlated with temperature.
Resumo:
Seasonal changes in abundance, size and aspects of the population structure of Meganyctiphanes norvegica (M. Sars) and Nyctiphanes couchi (Bell) are described from samples taken with the “Continuous Plankton Recorder” at 10 m depth over a 2 yr period (1966 and 1967) in the North Atlantic Ocean and the North Sea. M. norvegica lived for a maximum of just over 2 yr, and adults of both year-classes spawned during a limited breeding season in the spring or summer. N. couchi spawned over a prolonged breeding season, giving rise to a complex of cohorts with overlapping size ranges. It was concluded that 3 or 4 cohorts were spawned in each year and that the maximum life span was probably greater than 1 yr, although maturity may be attained in less than a year. Estimated annual production at 10 m depth for M. norvegica ranged from 0.80 to 18.74 mg m-3yr-1 and for N. couchi from 0.67 to 8.23 mg m-3yr-1. P:B ratios ranged from 1.3:1 to 6.3:1 for M. norvegica and 4.0:1 to 5.5:1 for N. couchi.
Resumo:
Samples taken in the northern North Sea with the Continuous Plankton Recorder (CPR), the Undulating Oceanographic Recorder (UOR), the Longhurst Hardy Plankton Recorder (LHPR) and by our colleagues from other participating Institutes during the Fladen Ground Experiment (FLEX 76) were used to describe the vertical distribution and population dynamics of Calanus finmarchicus (Gunnerus) and to provide estimates of the production and carbon budget of the population from 19 March to 3 June, 1976. Total production of the 19 March to 3 June, 1976. Total production of the nauplii and copepodite stages (including adults), during the exponential growth phase in May, was estimated to be in the range of 0.49 to 0.91 g C m-2 d-1 or 29.0 to 55 g dry wt m-2 (14.5 to 27.8 g C m-2) for the three successive 10 d periods in May. Two gross growth efficiencies (K 1) (20 and 34%), together with the lower value of C. finmarchicus production, were used to calculate the gross ingestion levels of algae as 2.45 and 1.44 g C m-2 d-1 (73.5 and 43.2 g C m-2 over the May period). These ingestion levels, together with the algae ingested by other zooplankton species, are greater than the estimated total phytoplankton production of 45.9 g C m-2 over the FLEX period. A number of factors are discussed which could explain the discrepancies between the production estimates. One suggestion is that the vertical distribution of the development stages of this herbivorous copepod and their diel and ontogenetic migration patterns enable it to efficiently exploit its food source. Data from the FLEX experiment indicated that the depletion of nutrients limited the size of the spring bloom, but that it was the grazing pressure exerted by C. finmarchicus which was responsible for the control and depletion of the phytoplankton in the spring of 1976 in the northern North Sea.
Resumo:
Results from the Continuous Plankton Recorder (CPR) survey for 1966 and 1967 are used to describe seasonal changes in abundance, size and aspects of the population structure of Thysanoessa inermis (Krøyer) and T. raschi (M. Sars) at a depth of 10 m in the North Sea and in American coastal waters from the Grand Banks to the Gulf of Maine. Production and dry weight were estimated from these data. Two year-groups were usually present in the breeding population, the proportion surviving into a second year being higher in American waters than in the North Sea. Annual production for each species was within the range 0.69 to 4.66 mg m-3 and the ratio between production and biomass (P:B) was between 1.3 and 4.2; values outside these ranges were obtained only for American coastal waters in 1967, when the frequency of sampling was low.