Apical access and closure devices for transapical transcatheter heart valve procedures.

The majority of transcatheter aortic valve implantations, structural heart procedures and the newly developed transcatheter mitral valve repair and replacement are traditionally performed either through a transfemoral or a transapical access site, depending on the presence of severe peripheral vascular disease or anatomic limitations. The transapical approach, which carries specific advantages related to its antegrade nature and the short distance between the introduction site and the cardiac target, is traditionally performed through a left anterolateral mini-thoracotomy and requires rib retractors, soft tissue retractors and reinforced apical sutures to secure, at first, the left ventricular apex for the introduction of the stent-valve delivery systems and then to seal the access site at the end of the procedure. However, despite the advent of low-profile apical sheaths and newly designed delivery systems, the apical approach represents a challenge for the surgeon, as it has the risk of apical tear, life-threatening apical bleeding, myocardial damage, coronary damage and infections. Last but not least, the use of large-calibre stent-valve delivery systems and devices through standard mini-thoracotomies compromises any attempt to perform transapical transcatheter structural heart procedures entirely percutaneously, as happens with the transfemoral access site, or via a thoracoscopic or a miniaturised video-assisted percutaneous technique. During the past few years, prototypes of apical access and closure devices for transapical heart valve procedures have been developed and tested to make this standardised successful procedure easier. Some of them represent an important step towards the development of truly percutaneous transcatheter transapical heart valve procedures in the clinical setting.

Barn owl feathers as biomonitors of mercury: sources of variation in sampling procedures.

Given their central role in mercury (Hg) excretion and suitability as reservoirs, bird feathers are useful Hg biomonitors. Nevertheless, the interpretation of Hg concentrations is still questioned as a result of a poor knowledge of feather physiology and mechanisms affecting Hg deposition. Given the constraints of feather availability to ecotoxicological studies, we tested the effect of intra-individual differences in Hg concentrations according to feather type (body vs. flight feathers), position in the wing and size (mass and length) in order to understand how these factors could affect Hg estimates. We measured Hg concentration of 154 feathers from 28 un-moulted barn owls (Tyto alba), collected dead on roadsides. Median Hg concentration was 0.45 (0.076-4.5) mg kg(-1) in body feathers, 0.44 (0.040-4.9) mg kg(-1) in primary and 0.60 (0.042-4.7) mg kg(-1) in secondary feathers, and we found a poor effect of feather type on intra-individual Hg levels. We also found a negative effect of wing feather mass on Hg concentration but not of feather length and of its position in the wing. We hypothesize that differences in feather growth rate may be the main driver of between-feather differences in Hg concentrations, which can have implications in the interpretation of Hg concentrations in feathers. Finally, we recommend that, whenever possible, several feathers from the same individual should be analysed. The five innermost primaries have lowest mean deviations to both between-feather and intra-individual mean Hg concentration and thus should be selected under restrictive sampling scenarios.

Evaluation of occupational and patient dose in cerebral angiography procedures

Objective The present study was aimed at estimating the doses received by physicians and patients during cerebral angiography procedures in a public hospital of Recife, PE, Brazil. Materials and Methods The study sample included 158 adult patients, and during the procedures the following parameters were evaluated: exposure parameters (kV, mAs), number of acquired images, reference air kerma value (Ka,r) and air kerma-area product (PKA). Additionally, the physicians involved in the procedures were evaluated as for absorbed dose in the eyes, thyroid, chest, hands and feet. Results The results demonstrated that the doses to the patients' eyes region were relatively close to the threshold for cataract occurrence. As regards the physicians, the average effective dose was 2.6 µSv, and the highest effective dose recorded was 16 µSv. Conclusion Depending on the number of procedures, the doses received by the physicians may exceed the annual dose limit for the crystalline lenses (20 mSv) established by national and international standards. It is important to note that the high doses received by the physicians are due to the lack of radiation protection equipment and accessories, such as leaded curtains, screens and protective goggles.

Analytical procedures for determining Pb and Sr isotopic compositions in water samples by ID-TIMS

Few articles deal with lead and strontium isotopic analysis of water samples. The aim of this study was to define the chemical procedures for Pb and Sr isotopic analyses of groundwater samples from an urban sedimentary aquifer. Thirty lead and fourteen strontium isotopic analyses were performed to test different analytical procedures. Pb and Sr isotopic ratios as well as Sr concentration did not vary using different chemical procedures. However, the Pb concentrations were very dependent on the different procedures. Therefore, the choice of the best analytical procedure was based on the Pb results, which indicated a higher reproducibility from samples that had been filtered and acidified before the evaporation, had their residues totally dissolved, and were purified by ion chromatography using the Biorad® column. Our results showed no changes in Pb ratios with the storage time.

Synthesis of quinoxaline 1,4-di-N-oxide derivatives on solid support using room temperature and microwave-assisted solvent-free procedures

We describe the synthesis of 12 new ethyl and methyl quinoxaline-7-carboxylate 1,4-di-N-oxide derivatives on solid supports with room temperature and microwave-assisted solvent-free procedures. Results show that solid supports have good catalytic activity in the formation of quinoxaline 1,4-di-N-oxide derivatives. We found that florisil and montmorillonite KSF and K10 could be used as new, easily available, inexpensive alternatives of catalysts. Additionally, room temperature and microwave-irradiation solvent-free synthesis was more efficient than a conventional procedure (Beirut reaction), reducing reaction time and increasing yield.

BIOMATERIAIS: TIPOS, APLICAÇÕES E MERCADO

AbstractThe types of compounds used in the production of biomaterials, namely metals, ceramics, synthetic and natural polymers, as well as composite materials, are discussed in the present work, together with details of their application and evolution from biocompatible to bioactive, biodegradable, and biomimetic clinical products. The chemical structure, the three-dimensional structure, and the molecular organization of compounds frequently used in the manufacture of relevant classes of biomaterials are discussed, along with their advantages and some of their major limitations in specific clinical applications. The main chemical, physical, mechanical, and biological requirements of biomaterials categories are presented, as well as typical tissular responses to implanted biomaterials. Reasons for the recent economic growth of the biomaterials market segment are addressed, and the most successful biomaterial categories are discussed, emphasizing areas such as orthopedic and cardiovascular implants, regenerative medicine, tissue engineering, and controlled drug release devices. Finally, the need for the development of innovative and more accessible biomaterials, due to the expected increase in the number of elderly people and the growing trend of personalized medical procedures, is pointed out.

Flavonoids extraction from Alpinia zerumbet (Pers.) Burtt et Smith leaves using different procedures

The current study aims to verify the best method for a rapid and efficient extraction of flavonoids from Alpinia zerumbet. Dried leaves were extracted using distillated water and ethanol 70% by extraction methods of shaking maceration, ultrasonic, microwave and stirring. By the application of TLC and reversed-phase HPLC techniques the rutin and kaempferol-3-O-glucuronide were detected. Ethanol 70% was more efficient for flavonoids extraction than water. No significant yielding variation was verified for ultrasonic, microwave and stirring methods using ethanol 70% (11 to 14%). Relative concentration of rutin and kaempferol-3-O-glucuronide, respectively, was higher by ultrasonic (1.5 and 5.62 mg g-1 dried leaves) and by microwave (1.0 and 6.64 mg g-1 dried leaves) methods using 70% ethanol. Rapid and simplified extraction proceeding optimize phytochemical work and acquisition of secondary metabolites.

Development of Calculation Procedures for Wastewater Treatment Technologies for a Training System

Efficient designs and operations of water and wastewater treatment systems are largely based on mathematical calculations. This even applies to training in the treatment systems. Therefore, it is necessary that calculation procedures are developed and computerised a priori for such applications to ensure effectiveness. This work was aimed at developing calculation procedures for gas stripping, depth filtration, ion exchange, chemical precipitation, and ozonation wastewater treatment technologies to include them in ED-WAVE, a portable computer based tool used in design, operations and training in wastewater treatment. The work involved a comprehensive online and offline study of research work and literature, and application of practical case studies to generate ED-WAVE compatible representations of the treatment technologies which were then uploaded into the tool.

COMPARISON OF PROCEDURES FOR IMMEDIATE CHEMICAL ANALYSIS OF CHARCOAL

ABSTRACT The climate change, the quest for sustainability and the strong environmental pressures for alternatives to traditional fossil fuels have increased the interest in the search and use of renewable energy sources. Among them stands out the biomass of charcoal coming from renewable forests, widely used as a thermal reductant in the steel industry in the detriment of the use of mineral coal coke. This study aimed to compare different operating procedures of immediate chemical analysis of charcoal. Seven essays to immediate chemical analysis were compared, spread between procedures performed by Brazilian companies and laboratories, the test described by NBR 8112 and one realized with a thermogravimetric analyzer (TGA) using the parameters of the NBR 8112. There were significant differences in the volatiles matter content and consequently in the fixed carbon contents found. The differences between the procedures and the NBR 8112 were caused by an excess burning time, a mass sample above or below the standard or inappropriate container used for burning. It observed that the TGA appraisal of the volatiles content must be carried out with a burning time equal to 2 minutes to obtain results similar to those of the NBR 8112 norm. Moreover, the ash content values were statistically identical and the particles size did not influence the differences between means.

Effects of maintenance management procedures in sugarcane mechanic harvesting system equipment

ABSTRACT The aim of this study was to evaluate the effects of modifying the maintenance programming of equipment used in sugarcane mechanical harvesting, by transferring actions that can be planned to periods when machines are inactive due to meal breaks and other working shift transitions stoppages. A simulation model was developed to represent the maintenance procedures of combines, haulouts, and other vehicles used by a harvest team. Scenarios were tested using alternatives for interventions such as refueling, lubrication and harvester blade replacement, enabling strategies to be focused towards better utilization of cutting, loading, and transport (CLT) system equipment. As a result, it was possible to remove one combine and two haulouts, while maintaining current daily production. The maintenance time for harvesters, which refers to corrective maintenance and the transfer of remaining interventions for periods of inactivity, was reduced from 10.0% to 3.5% over the useful period. This study indicates that maintenance management in the sugarcane sector enables the expanded use of equipment, leading to the greater productivity of the CLT system.

Incidence of deep vein thrombosis and quality of venous thromboembolism prophylaxis

OBJECTIVE: to determine the incidence of deep vein thrombosis and prophylaxis quality in hospitalized patients undergoing vascular and orthopedic surgical procedures. METHODS: we evaluated 296 patients, whose incidence of deep venous thrombosis was studied by vascular ultrasonography. Risk factors for venous thrombosis were stratified according the Caprini model. To assess the quality of prophylaxis we compared the adopted measures with the prophylaxis guidelines of the American College of Chest Physicians. RESULTS: the overall incidence of deep venous thrombosis was 7.5%. As for the risk groups, 10.8% were considered low risk, 14.9%moderate risk, 24.3% high risk and 50.5% very high risk. Prophylaxis of deep venous thrombosis was correct in 57.7%. In groups of high and very high risk, adequate prophylaxis rates were 72.2% and 71.6%, respectively. Excessive use of chemoprophylaxis was seen in 68.7% and 61.4% in the low and moderate-risk groups, respectively. CONCLUSION: although most patients are deemed to be at high and very high risk for deep vein thrombosis, deficiency in the application of prophylaxis persists in medical practice.

Implementation of a perioperative management protocol for patients undergoing orthopedic surgery

OBJECTIVE: To evaluate the initial results after the implementation of perioperative protocol in patients over 60 years of age undergoing surgical treatment for femur fractures.METHODS: We conducted a prospective study of patients older than 60 years who were hospitalized with femur fracture. They were operated under spinal anesthesia and analgesia by lumbar plexus blockade. Data evaluation was performed before arrival in the operating room during surgery, in the post-anesthesia recovery room and in the ward the next morning of the operation.RESULTS: 105 patients underwent various types of surgical corrections of the femur. The hospital stay ranged from three to 86 days. Fasting ranged from 9h15min to 19h30mn. Hypotension occurred in 5.7%. The duration of motor blockade ranged from 1h45min to 5h30imn. Maltodextrin feeding ranged from 50min to 3h45min and the time spent in the post-anesthetic care unit ranged from 50 minutes to 4 hours. Onset of oral intake in the ward ranged from 4hto 8h15min. The duration of anesthesia ranged from 14 to 33 hours. No patient required a urinary catheter, nor was transferred to the ICU. All patients were able to be discharged on the first postoperative day.CONCLUSION: The use of a protocol to accelerate the postoperative period may reduce the fasting time, length of hospital stay and provide faster i discharge n elderly patients with femur fractures.

Unintentionally retained foreign bodies after surgical procedures. Analysis of 4547 cases

Objective: this study aims to explore the experience of Brazilian surgeons on Unintentionally Retained Foreign Bodies (RFB) after surgical procedures. Methods: A questionnaire was sent to surgeons by electronic mail, between March and July 2012. The questions analyzed their experience with foreign bodies (FB), foreign bodies' types, clinical manifestations, diagnoses, risk factors and legal implications. Results: in the 2872 eligible questionnaires, 43% of the surgeons asserted that they had already left FB and 73% had removed FB in one or more occasions, totalizing 4547. Of these foreign bodies, 90% were textiles, 78% were discovered in the first year and 14% remained asymptomatic. Among doctors with less than five years after graduation, 36% had already left a FB. The most frequently surgical procedures mentioned were the elective (57%) and routine (85%) ones. Emergency (26%), lack of counting (25%) and inadequate conditions of work contributed (12.5%) to the occurrence. In 46% of the cases patients were alerted about the FB, and 26% of them sued the doctors or the institution. Conclusions: challenging medical situations, omission of security protocols and inadequate work conditions contributed to RFB. However, RFB occurs mostly in routine procedures such as cesarean or cholecystectomy, and at the beginning of the professional career, highlighting, particularly in poorest countries, the need for primary prevention. Textiles predominated causing clinical repercussions and they were diagnosed in the first postoperative months. Surgeons were sued in 11.3% of the RFB cases.