Origin and possible roles of the Sox8 transcription factor gene during sexual development

Sox8 is a member of the Sox family of developmental transcription factor genes and is closely related to Sox9, a critical gene involved in mammalian sex determination and differentiation. Both genes encode proteins with the ability to bind similar DNA target sequences, and to activate transcription in in vitro assays. Expression studies indicate that the two genes have largely overlapping patterns of activity during mammalian embryonic development. A knockout of Sox8 in mice has no obvious developmental phenotype, suggesting that the two genes are able to act redundantly in a variety of developmental contexts. In particular, both genes are expressed in the developing Sertoli cell lineage of the developing testes in mice, and both proteins are able to activate transcription of the gene encoding anti-Mullerian hormone (AMH), through synergistic action with steroidogenic factor I (SF1). We have hypothesized that Sox8 may substitute for Sox9 in species where Sox9 is expressed too late to be involved in sex determination or regulation of Amh expression. However, our studies involving the red-eared slider turtle indicate that Sox8 is expressed at similar levels in males and females throughout the sex-determining period, suggesting that Sox8 is neither a transcriptional regulator for Amh, nor responsible for sex determination or gonad differentiation in that species. Similarly, Sox8 is not expressed in a sexually dimorphic pattern during gonadogenesis in the chicken. Since a functional role(s) for Sox8 is implied by its conservation during evolution, the significance of Sox8 for sexual and other aspects of development will need to be uncovered through more directed lines of experimentation. Copyright (C) 2003 S. Karger AG, Basel.

Experimental and theoretical characterisation of tunable fibre gratings

This thesis presents details on both theoretical and experimental aspects of UV written fibre gratings. The main body of the thesis deals with the design, fabrication and testing of telecommunication optical fibre grating devices, but also an accurate theoretical analysis of intra-core fibre gratings is presented. Since more than a decade, fibre gratings have been extensively used in the telecommunication field (as filters, dispersion compensators, and add/drop multiplexers for instance). Gratings for telecommunication should conform to very high fabrication standards as the presence of any imperfection raises the noise level in the transmission system compromising its ability of transmitting intelligible sequence of bits to the receiver. Strong side lobes suppression and high and sharp reflection profile are then necessary characteristics. A fundamental part of the theoretical and experimental work reported in this thesis is about apodisation. The physical principle of apodisation is introduced and a number of apodisation techniques, experimental results and numerical optimisation of the shading functions and all the practical parameters involved in the fabrication are detailed. The measurement of chromatic dispersion in fibres and FBGs is detailed and an estimation of its accuracy is given. An overview on the possible methods that can be implemented for the fabrication of tunable fibre gratings is given before detailing a new dispersion compensator device based on the action of a distributed strain onto a linearly chirped FBG. It is shown that tuning of second and third order dispersion of the grating can be obtained by the use of a specially designed multipoint bending rig. Experiments on the recompression of optical pulses travelling long distances are detailed for 10 Gb/s and 40 Gb/s. The characterisation of a new kind of double section LPG fabricated on a metal-clad coated fibre is reported. The fabrication of the device is made easier by directly writing the grating through the metal coating. This device may be used to overcome the recoating problems associated with standard LPGs written in step-index fibre. Also, it can be used as a sensor for simultaneous measurements of temperature and surrounding medium refractive index.

Innovation in teams : a qualitative and quantitative study of team behaviours

This thesis explores the processes of team innovation. It utilises two studies, an organisationally based pilot and an experimental study, to examine and identify aspects of teams' behaviours that are important for successful innovative outcome. The pilot study, based in two automotive manufacturers, involved the collection of team members' experiences through semi-structured interviews, and identified a number of factors that affected teams' innovative performance. These included: the application of ideative & dissemination processes; the importance of good team relationships, especially those of a more informal nature, in facilitating information and ideative processes; the role of external linkages in enhancing quality and radicality of innovations; and the potential attenuation of innovative ideas by time deadlines. This study revealed a number key team behaviours that may be important in successful innovation outcomes. These included; goal setting, idea generation and development, external contact, task and personal information exchange, leadership, positive feedback and resource deployment. These behaviours formed the basis of a coding system used in the second part of the research. Building on the results from the field based research, an experimental study was undertaken to examine the behavioural differences between three groups of sixteen teams undertaking innovative an task to produce an anti-drugs poster. They were randomly assigned to one of three innovation category conditions suggested by King and Anderson (1990), emergent, imported and imposed. These conditions determined the teams level of access to additional information on previously successful campaigns and the degree of freedom they had with regarding to the design of the poster. In addition, a further experimental condition was imposed on half of the teams per category which involved a formal time deadline for task completion. The teams were video taped for the duration of their innovation and their behaviours analysed and coded in five main aspects including; ideation, external focus, goal setting, interpersonal, directive and resource related activities. A panel of experts, utilising five scales developed from West and Anderson's (1996) innovation outcome measures, assessed the teams' outputs. ANOVAs and repeated measure ANOVAs were deployed to identify whether there were significant differences between the different conditions. The results indicated that there were some behavioural differences between the categories and that over the duration of the task behavioural changes were identified. The results, however, revealed a complex picture and suggested limited support for three distinctive innovation categories. There were many differences in behaviours, but rarely between more than two of the categories. A main finding was the impact that different levels of constraint had in changing teams' focus of attention. For example, emergent teams were found to use both their own team and external resources, whilst those who could import information about other successful campaigns were likely to concentrate outside the team and pay limited attention to the internal resources available within the team. In contrast, those operating under task constraints with aspects of the task imposed onto them were more likely to attend to internal team resources and pay limited attention to the external world. As indicated by the earlier field study, time deadlines did significantly change teams' behaviour, reducing ideative and information exchange behaviours. The model shows an important behavioural progression related to innovate teams. This progression involved the teams' openness initially to external sources, and then to the intra-team environment. Premature closure on the final idea before their mid-point was found to have a detrimental impact on team's innovation. Ideative behaviour per se was not significant for innovation outcome, instead the development of intra-team support and trust emerged as crucial. Analysis of variance revealed some limited differentiation between the behaviours of teams operating under the aforementioned three innovation categories. There were also distinct detrimental differences in the behaviour of those operating under a time deadline. Overall, the study identified the complex interrelationships of team behaviours and outcomes, and between teams and their context.

Deliberate and spontaneous sensations of disembodiment:capacity or flaw?

Introduction: Hallucinations that involve shifts in the subjectively experienced location of the self, have been termed “out-of-body experiences” (OBEs). Early psychiatric accounts cast OBEs as a specific instance of depersonalisation and derealisation disorder (DPD-DR). However, during feelings of alienation and lack of body realism in DPD-DR the self is experienced within the physical body. Deliberate forms of “disembodiment” enable humans to imagine another’s visuo-spatial perspective taking (VPT), thus, if a strong relationship between deliberate and spontaneous forms of disembodiment could be revealed, then uncontrolled OBEs could be “the other side of the coin” of a uniquely human capacity. Methods: We present a narrative review of behavioural and neuroimaging work emphasising methodological and theoretical aspects of OBE and VPT research and a potential relationship. Results: Results regarding a direct behavioural relationship between VPT and OBE are mixed and we discuss reasons by pointing out the importance of using realistic tasks and recruiting genuine OBEers instead of general DPD-DR patients. Furthermore, we review neuroimaging evidence showing overlapping neural substrates between VPT and OBE, providing a strong argument for a relationship between the two processes. Conclusions: We conclude that OBE should be regarded as a necessary implication of VPT ability in humans, or even as a necessary and potentially sufficient condition for the evolution of VPT.

THE IMPACT OF UPPER-LEVEL PROCESSES ON THE INTENSITY AND STRUCTURAL CHANGES OF HURRICANE SANDY (2012)

The first part of this study examines the relative roles of frontogenesis and tropopause undulation in determining the intensity and structural changes of Hurricane Sandy (2012) using a high-resolution cloud-resolving model. A 138-h simulation reproduces Sandy’s four distinct development stages: (i) rapid intensification, (ii) weakening, (iii) steady maximum surface wind but with large continued sea-level pressure (SLP) falls, and (iv) re-intensification. Results show typical correlations between intensity changes, sea-surface temperature and vertical wind shear during the first two stages. The large SLP falls during the last two stages are mostly caused by Sandy’s moving northward into lower-tropopause regions associated with an eastward-propagating midlatitude trough, where the associated lower-stratospheric warm air wraps into the storm and its surrounding areas. The steady maximum surface wind occurs because of the widespread SLP falls with weak pressure gradients lacking significant inward advection of absolute angular momentum (AAM). Meanwhile, there is a continuous frontogenesis in the outer region during the last three stages. Cyclonic inward advection of AAM along each frontal rainband accounts for the continued expansion of the tropical-storm-force wind and structural changes, while deep convection in the eyewall and merging of the final two survived frontal rainbands generate a spiraling jet in Sandy’s northwestern quadrant, leading to its re-intensification prior to landfall. The physical, kinematic and dynamic aspects of an upper-level outflow layer and its possible impact on the re-intensification of Sandy are examined in the second part of this study. Above the outflow layer isentropes are tilted downward with radius as a result of the development of deep convection and an approaching upper-level trough, causing weak subsidence. Its maximum outward radial velocity is located above the cloud top, so the outflow channel experiences cloud-induced long-wave cooling. Because Sandy has two distinct convective regions (an eyewall and a frontal rainband), it has multiple outflow layers, with the eyewall’s outflow layer located above that of the frontal rainband. During the re-intensification stage, the eyewall’s outflow layer interacts with a jet stream ahead of the upper-level trough axis. Because of the presence of inertial instability on the anticyclonic side of the jet stream and symmetric instability in the inner region of the outflow layer, Sandy’s secondary circulation intensifies. Its re-intensification ceases when these instabilities disappear. The relationship between the intensity of the secondary circulation and dynamic instabilities of the outflow layer suggests that the re-intensification occurs in response to these instabilities. Additionally, it is verified that the long-wave cooling in the outflow layer helps induce symmetric instability by reducing static stability.

WATER RESOURCES, HEALTH, AND THE SUSTAINABILITY OF INTERVENTIONS TO ACHIEVE WATER AND SANITATION TARGETS OF THE MILLENNIUM DEVELOPMENT GOALS IN A CHANGING WORLD

This dissertation addresses sustainability of rapid provision of safe water and sanitation required to meet the Millennium Development Goals. Review of health-related literature and global statistics demonstrates engineers' role in achieving the MDGs. This review is followed by analyses relating to social, environmental, and health aspects of meeting MDG targets. Analysis of national indicators showed that inadequate investment, poor or nonexistent policies and governance are challenges to global sanitation coverage in addition to lack of financial resources and gender disparity. Although water availability was not found to be a challenge globally, geospatial analysis demonstrated that water availability is a potentially significant barrier for up to 46 million people living in urban areas and relying on already degraded water resources for environmental income. A daily water balance model incorporating the National Resources Conservation Services curve number method in Bolivian watersheds showed that local water stress is linked to climate change because of reduced recharge. Agricultural expansion in the region slightly exacerbates recharge reductions. Although runoff changes will range from -17% to 14%, recharge rates will decrease under all climate scenarios evaluated (-14% to -27%). Increasing sewer coverage may place stress on the readily accessible natural springs, but increased demand can be sustained if other sources of water supply are developed. This analysis provides a method for hydrological analysis in data scarce regions. Data required for the model were either obtained from publicly available data products or by conducting field work using low-cost methods feasible for local participants. Lastly, a methodology was developed to evaluate public health impacts of increased household water access resulting from domestic rainwater harvesting, incorporating knowledge of water requirements of sanitation and hygiene technologies. In 37 West African cities, domestic rainwater harvesting has the potential to reduce diarrheal disease burden by 9%, if implemented alone with 400 L storage. If implemented in conjunction with point of use treatment, this reduction could increase to 16%. The methodology will contribute to cost-effectiveness evaluations of interventions as well as evaluations of potential disease burden resulting from reduced water supply, such as reductions observed in the Bolivian communities.

Development of methodologies supporting the sustainable and safe integration of offshore conventional and renewable energy production

Against a backdrop of rapidly increasing worldwide population and growing energy demand, the development of renewable energy technologies has become of primary importance in the effort to reduce greenhouse gas emissions. However, it is often technically and economically infeasible to transport discontinuous renewable electricity for long distances to the shore. Another shortcoming of non-programmable renewable power is its integration into the onshore grid without affecting the dispatching process. On the other hand, the offshore oil & gas industry is striving to reduce overall carbon footprint from onsite power generators and limiting large expenses associated to carrying electricity from remote offshore facilities. Furthermore, the increased complexity and expansion towards challenging areas of offshore hydrocarbons operations call for higher attention to safety and environmental protection issues from major accident hazards. Innovative hybrid energy systems, as Power-to-Gas (P2G), Power-to-Liquid (P2L) and Gas-to-Power (G2P) options, implemented at offshore locations, would offer the opportunity to overcome challenges of both renewable and oil & gas sectors. This study aims at the development of systematic methodologies based on proper sustainability and safety performance indicators supporting the choice of P2G, P2L and G2P hybrid energy options for offshore green projects in early design phases. An in-depth analysis of the different offshore hybrid strategies was performed. The literature reviews on existing methods proposing metrics to assess sustainability of hybrid energy systems, inherent safety of process routes in conceptual design stage and environmental protection of installations from oil and chemical accidental spills were carried out. To fill the gaps, a suite of specific decision-making methodologies was developed, based on representative multi-criteria indicators addressing technical, economic, environmental and societal aspects of alternative options. A set of five case-studies was defined, covering different offshore scenarios of concern, to provide an assessment of the effectiveness and value of the developed tools.

Development and Detailed Characterization of Innovative, High-Performance Membrane Materials for CO2 Capture Processes

The scope of this dissertation is to study the transport phenomena of small molecules in polymers and membranes for gas separation applications, with particular attention to energy efficiency and environmental sustainability. This work seeks to contribute to the development of new competitive selective materials through the characterization of novel organic polymers such as CANALs and ROMPs, as well as through the combination of selective materials obtaining mixed matrix membranes (MMMs), to make membrane technologies competitive with the traditional ones. Kinetic and thermodynamic aspects of the transport properties were investigated in ideal and non-ideal scenarios, such as mixed-gas experiments. The information we gathered contributed to the development of the fundamental understanding related to phenomenon like CO2-induced plasticization and physical aging. Among the most significant results, ZIF-8/PPO MMMs provided materials whose permeability and selectivity were higher than those of the pure materials for He/CO2 separation. The CANALs featured norbornyl benzocyclobutene backbone and thereby introduced a third typology of ladder polymers in the gas separation field, expanding the structural diversity of microporous materials. CANALs have a completely hydrocarbon-based and non-polar rigid backbone, which makes them an ideal model system to investigate structure-property correlations. ROMPs were synthesized by means of the ring opening metathesis living polymerization, which allowed the formation of bottlebrush polymers. CF3-ROMP reveled to be ultrapermeable to CO2, with unprecedented plasticization resistance properties. Mixed-gas experiments in glassy polymer showed that solubility-selectivity controls the separation efficiency of materials in multicomponent conditions. Finally, it was determined that plasticization pressure in not an intrinsic property of a material and does not represent a state of the system, but rather comes from the contribution of solubility coefficient and diffusivity coefficient in the framework of the solution-diffusion model.

Learning from errors: Psychological, relational, and cultural aspects

Although errors might foster learning, they can also be perceived as something to avoid if they are associated with negative consequences (e.g., receiving a bad grade or being mocked by classmates). Such adverse perceptions may trigger negative emotions and error-avoidance attitudes, limiting the possibility to use errors for learning. These students’ reactions may be influenced by relational and cultural aspects of errors that characterise the learning environment. Accordingly, the main aim of this research was to investigate whether relational and cultural characteristics associated with errors affect psychological mechanisms triggered by making mistakes. In the theoretical part, we described the role of errors in learning using an integrated multilevel (i.e., psychological, relational, and cultural levels of analysis) approach. Then, we presented three studies that analysed how cultural and relational error-related variables affect psychological aspects. The studies adopted a specific empirical methodology (i.e., qualitative, experimental, and correlational) and investigated different samples (i.e., teachers, primary school pupils and middle school students). Findings of study one (cultural level) highlighted errors acquire different meanings that are associated with different teachers’ error-handling strategies (e.g., supporting or penalising errors). Study two (relational level) demonstrated that teachers’ supportive error-handling strategies promote students’ perceptions of being in a positive error climate. Findings of study three (relational and psychological level) showed that positive error climate foster students’ adaptive reactions towards errors and learning outcomes. Overall, our findings indicated that different variables influence students’ learning from errors process and teachers play an important role in conveying specific meanings of errors during learning activities, dealing with students’ mistakes supportively, and establishing an error-friendly classroom environment.

It's a matter of culture: analyzing worldbuilding in Avatar: The Last Airbender.

This dissertation is going to analyze culture in media and the role it plays in worldbuilding, taking into account one of the most-loved franchises in western animation, Avatar: The Last Airbender. Moreover, it wants to provide a different perspective on culture, posing the focus on the products consumed by many on a daily basis. First of all, this dissertation will start by trying to give “culture��� itself a definition, focusing on two works of literature from which it will draw its analysis related to worldbuilding: Agar’s cultures in comparison and Hofstede’s model of culture. Then, it will move on to the concept of worldbuilding – what we define as worldbuilding, and how it mixes with culture. We will comment on how worldbuilding has gotten more attention with growing online communities and how it could make or break a franchise, with the example of the Divergent saga. Finally, it will move on to the main case study, Avatar: The Last Airbender, which will be analyzed from a cultural standpoint, underlining the role worldbuilding plays in it, and there will be a focus on nonverbal communication in animated media.

Educação escolar Tupinikim e Guarani : experiências de interculturalidade em aldeias de Aracruz, no Estado do Espírito Santo

A pesquisa analisa as relações entre interculturalidade, práxis e educação escolar indígena Tupinikim e Guarani do município de Aracruz, Espírito Santo, Brasil. Investiga a práxis da educação intercultural no espaço da educação escolar indígena como meio de revitalização das culturas Tupinikim e Guarani. Objetiva problematizar a formação inicial e continuada dos professores indígenas; discutir a práxis da interculturalidade no contexto da educação escolar indígena; e, identificar outros espaços educativos da cultura e educação indígena. Analisa aspectos teóricos e práticos sobre cultura (WILLIAMS, 2008; BRANDÃO, 1989; FORQUIN, 1993; CANDAU, 2011; GEERTZ, 1989), interculturalidade (D‘AMBROSIO,1996; FLEURI, 2002; 2003; SCANDIUZZI, 2009;), identidade e alteridade (MELIÁ, 2000; FREIRE, 1981; 1987; LITAIFF, 2004) e práxis (FREIRE, 1989; VÁSQUEZ, 2011; SEMERARO, 2006) e educação (escolar) indígena de acordo com a legislação vigente. Realiza pesquisa interpretativa (GEERTZ, 1989) na educação escolar indígena junto aos professores indígenas Guarani das Aldeias de Boa Esperança e Três Palmeiras (2009-2010) e professores indígenas Tupinikim da Aldeia de Comboios (2011-2013) na perspectiva de um diálogo intercultural. Contribuem nos processos investigativos para produção, sistematização e análise de dados a realização de observações, entrevistas semiestruturadas, registros no caderno de campo, fotografias, gravações em áudio e em vídeo e análise documental sobre a educação escolar indígena de Aracruz. (ANDRÉ, 2007; GIL, 1999; 2004). Os resultados deste trabalho levantam questões relativas a duas realidades de educação escolar nas comunidades indígenas pesquisadas que se constituem em aspectos de sobrevivência e desencadeia formas para interagir e reagir em defesa de sua identidade e dignidade. Nesse sentido, a escola é um local de vivências e de encontro, vista e sentida pelas lideranças e pela comunidade como uma possibilidade real para desenvolver um elo entre as formas tradicionais de vida e as formas contemporâneas. O desafio de garantir uma escola nestes termos significa concretizar a proposta de um projeto de educação escolar para os povos indígenas, constituído por especificidades de como trabalhar a terra, pelo reconhecimento de suas tradições, das línguas e da memória coletiva. Distante de apresentar respostas conclusivas propõe uma educação escolar, coletiva e participativa, que critica e dialoga com todos os envolvidos no processo educativo.

Competing priorities: Singapore teachers’ perspectives on critical literacy

This paper explores a group of Singaporean English language teachers’ knowledge and beliefs about critical literacy as well as their perspectives on how best to teach literacy and critical literacy in Singapore schools. A face-to-face survey was conducted among 58 English language teachers by using open-ended questions. The survey covered various topics related to literacy instruction including text decoding, meaning construction, and critical analysis of texts. The participating teachers believed strongly that reading and writing are transactional and interactional practices. However, they were less certain in their beliefs about teaching critical literacy including the critical, analytical and evaluative aspects of text reading. Some teachers saw a conflict between using time on teaching critical literacy and preparing students to pass their exams. As critical literacy is not a requirement at exams, they found it difficult to justify using time teaching it. The results suggest that the teachers’ belief systems are strongly influenced by the broad macrostructure of the educational system in Singapore and their own educational experiences.

Global Trade Governance and ASEAN: Studies of Trade-Related Aspects of Labor, Environment and Culture in Southeast Asia

Thesis (Ph.D.)--University of Washington, 2016-08

Normative, systemic and procedural aspects: a review of indicator‐based sustainability assessments in agriculture

Several methods for assessing the sustainability of agricultural systems have been developed. These methods do not fully: (i) take into account the multi‐functionality of agriculture; (ii) include multidimensionality; (iii) utilize and implement the assessment knowledge; and (iv) identify conflicting goals and trade‐offs. This paper reviews seven recently developed multidisciplinary indicator‐based assessment methods with respect to their contribution to these shortcomings. All approaches include (1) normative aspects such as goal setting, (2) systemic aspects such as a specification of scale of analysis, (3) a reproducible structure of the approach. The approaches can be categorized into three typologies. The top‐down farm assessments focus on field or farm assessment. They have a clear procedure for measuring the indicators and assessing the sustainability of the system, which allows for benchmarking across farms. The degree of participation is low, potentially affecting the implementation of the results negatively. The top‐down regional assessment assesses the on‐farm and the regional effects. They include some participation to increase acceptance of the results. However, they miss the analysis of potential trade‐offs. The bottom‐up, integrated participatory or transdisciplinary approaches focus on a regional scale. Stakeholders are included throughout the whole process assuring the acceptance of the results and increasing the probability of implementation of developed measures. As they include the interaction between the indicators in their system representation, they allow for performing a trade‐off analysis. The bottom‐up, integrated participatory or transdisciplinary approaches seem to better overcome the four shortcomings mentioned above.