Development of semicrystalline morphology of poly(L-lactic acid) during processing of a vascular scaffold

New and promising treatments for coronary heart disease are enabled by vascular scaffolds made of poly(L-lactic acid) (PLLA), as demonstrated by Abbott Vascular’s bioresorbable vascular scaffold. PLLA is a semicrystalline polymer whose degree of crystallinity and crystalline microstructure depend on the thermal and deformation history during processing. In turn, the semicrystalline morphology determines scaffold strength and biodegradation time. However, spatially-resolved information about the resulting material structure (crystallinity and crystal orientation) is needed to interpret in vivo observations.

The first manufacturing step of the scaffold is tube expansion in a process similar to injection blow molding. Spatial uniformity of the tube microstructure is essential for the consistent production and performance of the final scaffold. For implantation into the artery, solid-state deformation below the glass transition temperature is imposed on a laser-cut subassembly to crimp it into a small diameter. Regions of localized strain during crimping are implicated in deployment behavior.

To examine the semicrystalline microstructure development of the scaffold, we employed complementary techniques of scanning electron and polarized light microscopy, wide-angle X-ray scattering, and X-ray microdiffraction. These techniques enabled us to assess the microstructure at the micro and nano length scale. The results show that the expanded tube is very uniform in the azimuthal and axial directions and that radial variations are more pronounced. The crimping step dramatically changes the microstructure of the subassembly by imposing extreme elongation and compression. Spatial information on the degree and direction of chain orientation from X-ray microdiffraction data gives insight into the mechanism by which the PLLA dissipates the stresses during crimping, without fracture. Finally, analysis of the microstructure after deployment shows that it is inherited from the crimping step and contributes to the scaffold’s successful implantation in vivo.

Influence of the metal center on the morphology of coordination compounds thin films

Thin film morphology of tris-(8-hydroxyquinolate) aluminium (III) (Alq3) and bis-(8-hydroxyquinolate) oxovanadium (IV) (VOq2) are compared. Alq3 films deposited onto mica at 300K look almost featureless, but dendrimers or randomly distributed needle-shaped crystallites appear as a consequence of crystallization in time. We show that a possible origin of this process is exposure to solvent vapors. On the other hand, VOq2 films retain their textured morphology as thickness increases because of stabilizing intermolecular interactions between vanadyl groups.

Orientation and external morphology of burrows of the mangrove crab Ucides cordatus (Crustacea: Brachyura: Ucididae)

The aim of the present study was to characterize the external morphology and the orientation of burrows constructed by the mangrove crab Ucides cordatus. Data were obtained from two mangrove forests of similar vegetation dominance (Laguncularia racemosa) but differing in flooding heights. These mangroves were located near Barra de Icapara, Iguape City (SP), Brazil, (24 degrees 50'36 '' S-47 degrees 59'53'W). A total of 221 burrows were examined (120 on the high mangrove and 101 on the low mangrove). External morphology of the burrows was recorded by photographs for categorization and description. The directions of the burrow openings were recorded using a geological compass and the declivities of the ducts were measured with a clinometer. Females constructed 70.8% at Site A and 69.4% at Site B of the occupied burrows with the opening facing the margin of the river (P < 0.001), whilst males showed no significant difference in the burrow orientation (P > 0.05) at either site. In females, the tendency for burrow orientation possibly has a reproductive connotation as larval dispersal may be favoured and enhanced by the tides. Four groups of distinct tracks related to the morphotypes and developmental stages of U. cordatus were observed, No sediment constructions associated with the burrows were recorded for this species. Declivity of the burrows from juveniles was lower than from adults (P < 0.05), probably caused by the differential growth of the chelipeds in this species.

Influence of the metal center on the morphology of coordination compounds thin films

Thin film morphology of tris-(8-hydroxyquinolate) aluminium (III) (Alq3) and bis-(8-hydroxyquinolate) oxovanadium (IV) (VOq2) are compared. Alq3 films deposited onto mica at 300K look almost featureless, but dendrimers or randomly distributed needle-shaped crystallites appear as a consequence of crystallization in time. We show that a possible origin of this process is exposure to solvent vapors. On the other hand, VOq2 films retain their textured morphology as thickness increases because of stabilizing intermolecular interactions between vanadyl groups.

Revisão do gênero Mecocephala Dallas, 1851 (Heteroptera, Pentatomidae)

Revision of the genus Mecocephala Dallas, 1851 (Heteroptera, Pentatomidae). The genus Mecocephala Dallas, 1851 is revised, and some taxonomic and geographical distribution data are evaluated. The following species are considered to belong to this genus: M. acuminata Dallas, 1851 = M. holmbergi Pirán, 1969 syn. nov., M. curculionoides Pirán, 1959, M. bonariensis sp. nov., M. magna sp. nov., M. maldonadensis sp. nov., and M. zikani sp. nov.; their distribution is restricted to southern Neotropical Region. Other species, formerly placed in Mecocephala, are considered, respectively: M. rubripes Berg, 1894 incertae sedis, M. darwini Kirkaldy, 1909 incertae sedis, M. atra Bergroth, 1914 incertae sedis, Paramecocephala uruguayensis (Pirán, 1970) comb. nov., Paramecocephala fusca (Haglund, 1868) comb. nov. A key to the species is presented.

Revisão do gênero Paramecocephala Benvegnú, 1968 (Heteroptera, Pentatomidae)

Revision of the genus Paramecocephala Benvegnú, 1968 (Heteroptera, Pentatomidae). The Neotropical genus Paramecocephala Benvegnú, 1968 is revised based on morphological characters, particularly of the genitalia of both sexes. Formerly monobasic with P. foveata Benvegnú, 1968, type species, the genus received two species recently transferred from Mecocephala Dallas, 1851: M. fusca Haglund, 1868 and M. uruguayensis Pirán, 1970. Five new species are herein described: P. australis Frey-da-Silva & Grazia sp. nov., P. bachmanni Frey-da-Silva & Grazia sp. nov., P. bergrothi Frey-da-Silva & Grazia sp. nov., P. guianensis Frey-da-Silva & Grazia sp. nov. and P. subsolana Frey-da-Silva & Grazia sp. nov. Illustrations of the genitalia, a key to the species and a distribution map are provided.

New Neotropical species of Hygronemobius Hebard, 1913 (Orthoptera: Grylloidea: Nemobiinae), including a brief discussion of male genitalia morphology and preliminary biogeographic considerations of the genus

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

The status of Petalocotyle Ozaki, 1934 (Digenea : Gyliauchenidae), including the description of two new species from acanthurid fishes in Queensland, Australia

The status of Petalocotyle Ozaki, 1934 within the Gyliauchenidae Goto & Matsudaira, 1918 is reviewed. Two new species, P. adenometra from Prionurus microlepidotus (Amity Point, Queensland, Australia) and P. diverticulata from Acanthurus nigrofuscus and A. lineatus (Heron Island, Queensland, Australia), are described. The body plan of Petalocotyle conforms to that of members of the Gyliauchenidae (oral sucker absent, well-developed pharynx, complex oesophagus and characteristic male terminal genitalia), indicating justifiable inclusion in this family. A new diagnosis is given for the genus, such that Petalocotyle is now identified by the presence of an anterior, protuberant ventral sucker, long caeca, a large, sigmoid cirrus-sac containing a coiled ejaculatory duct, and an extensive vitellarium. We suggest that, of all the known genera of gyliauchenids, Petalocotyle may most closely resemble the 'archaetypal gyliauchenid', that is, it may be placed basally within the radiation of the Gyliauchenidae. However, derived characters, like diverticula in the reproductive system, indicate that some characters of individual members of Petalocotyle may be considered advanced and do not reflect an archaetypal condition. Parallels in the structure of the male and female genitalia of Robphildollfusium Paggi & Orecchia, 1963 and Petalocotyle, along with the shared morphology of the digestive tract, indicate possible phylogenetic links between the two genera. This affinity is difficult to infer using morphology alone and recommend that Robphildollfusium remain detached from the Gyliauchenidae.

Incubation of eggs of the Australian broad-shelled turtle, Chelodina expansa (Testudinata : Chelidae), at different temperatures: effects on pattern of oxygen consumption and hatchling morphology

Incubation temperature influences embryonic development and the morphology of resultant hatchlings in many species of turtle but few studies have addressed its effect on oxygen consumption and total embryonic energy expenditure. Eggs of the Australian broad-shelled river turtle, Chelodina expansa, were incubated at constant temperatures of 24 degrees C and 28 degrees C to determine the effect of temperature on oxygen consumption, embryonic energy expenditure and hatchling morphology. All embryos at both incubation temperatures experienced a period of developmental diapause immediately after oviposition. Once this initial diapause was broken, embryos underwent a further period of developmental arrest when the embryo was still very small and had minimal oxygen consumption (

Revision of the larval morphology (Zoea I) of the family Hippolytidae (Decapoda, Caridea), with a description of the first stage of the shrimp Hippolyte obliquimanus Dana, 1852

The aim of this study was to summarize the available data on larval morphology of the first zoea of the family Hippolytidae and describe the first zoeal stage of H. obliquimanus from two geographically distinct populations, Brazilian and Caribbean in order to discuss inter- and intraspecific variability. Ovigerous females of Hippolyte obliquimanus were collected at Cahuita (Limon, Costa Rica) and at Ubatuba (Sao Paulo, Brazil). We compiled the published descriptions of all available hippolytid Zoea I (66 spp., 21%), and all zoeae share several characteristics. However, such morphological features cannot be used to distinguish the first zoeae of Hippolytidae from other caridean larvae. Historically, the presence of an exopodal seta at the maxillule and the absence of the anal spine/papilla have been considered as characteristic for the Zoea I of the genus Hippolyte. The results of our revision, however, did not support these conclusions: although H. obliquimanus showed an exopodal seta at the maxillule, four congeners did not bear such structure; moreover, H. obliquimanus as well as one other congener have an anal spine/papilla. All morphological characters observed in the first zoeal stage of H. obliquimanus are shared with others species of the family Hippolytidae. Intraspecific variability in Hippolyte obliquimanus was detected in one morphological aspect: the first zoea had four denticles on the ventral margin of the carapace in the Brazilian population, while specimens from the Costa Rican population had three.

Phylogeny of the Limnophilinae (Limoniidae) and early evolution of the Tipulomorpha (Diptera)

Tipulomorpha (craneflies) comprise one of the largest subgroups of Diptera, but its phylogeny at different levels has been poorly explored. This study presents the most comprehensive cladistic analysis of the group ever made, with emphasis on the genera and subgenera of the subfamily Limnophilinae (Limoniidae), assumed to include some of the earliest lineages of Tipulomorpha sensu stricto and therefore important for the understanding of the early patterns in the evolution of the craneflies. Eighty-eight characters of the male imago were scored for 104 exemplar species. The most parsimonious trees were searched using implied weighting, in the framework of a sensitivity analysis with different values of k (2 to 6). The dataset based on the characters of adult male morphology showed high levels of homoplasy and yielded very incongruent and unstable phylogenetic results, which are very sensitive to changes in analytical parameters. In the preferred and most parsimonious phylogenetic hypothesis, the Pediciidae is the sister-group of all other Tipulomorpha sensu stricto. The results indicate the paraphyly of the Limoniidae with respect to the Cylindrotomidae and Tipulidae, which are considered sister-groups. The Limoniidae subfamilies Limnophilinae, Limoniinae and Chioneinae are considered non-monophyletic. The study allowed a reconstruction of the possible ground plan condition of selected features of the adult male morphology of craneflies. The genera/subgenera Epiphragma (Epiphragma), Acantholimnophila, Shannonomyia, Limnophila (Arctolimnophila), Eloeophila, Conosia, Polymera, Polymera (Polymerodes), Prionolabis, Eutonia, Phylidorea (Phylidorea), Metalimnophila, Gynoplistia (Cerozodia), Gynoplistia (Dirhipis), Nothophila, Pseudolimnophila (Pseudolimnophila), Pilaria and Ulomorpha are considered monophyletic, but in general are defined by combinations of very homoplastic character states. Two Temperate Gondwanan clades, (Tonnoirella + (Edwardsomyia + (Tinemyia + (Rhamphophila + (Nothophila))))) and ((Notholimnophila + Bergrothomyia) + (Mesolimnophila + (Chilelimnophila + Ctenolimnophila))) are recovered. The genera Limnophila, Neolimnomyia, Gynoplistia (sensu lato) and Hexatoma (sensu lato) are considered non-monophyletic. The systematic position and some morphological characters of `problematic` taxa, such as Dactylolabis, Elephantomyia, Helius and Atarba are discussed on the light of the proposed phylogeny and the analysis of the characters. Character states are richly illustrated. A detailed study of the morphology of the male genitalia is made, and several genera and species have the morphology of the male genitalia illustrated for the first time.

The subfamily Aephnidiogeninae Yamaguti, 1934 (Digenea: Lepocreadiidae), its status and that of the genera Aephnidiogenes Nicoll, 1915, Holorchis Stossich, 1901, Austroholorchis n g, Pseudaephnidiogenes Yamaguti, 1971, Pseudoholorchis Yamaguti, 1958 and N

The status of all of the putative member genera of the subfamily Aephnidiogeninae is reconsidered, based mainly on the morphology of the terminal genitalia, Aephnidiogenes Nicoll, 1915 is the only genus retained in the Aaephnidiogeninae. Aephnidiogenes major Yamaguti, 1934 from Diagramma labiosum from the southern Great Barrier Reef is redescribed with particular reference to the terminal genitalia, and is shown to lack a true cirrussac, a condition considered to be diagnostic of the Aephnidiogeninae. Holorchis Stossich, 1901 is placed in the subfamily Lepidapedinae. Holorchis pycnoporus Stossich, 1901 from Pagellus acarne from off Spanish Sahara and from Diplodus vulgaris from off Italy and H. legendrei Dollfus, 1946 from Sparodon durbanensis and D. sargus from off eastern Cape Province, South Africa and from Pagellus erythrinus from the Adriatic Sea and Italy are studied and illustrated. The terminal genitalia of H. pycnoporus are found to be enigmatic, but those of H. legendrei are found to fit clearly into the 'Lepidapedon-like' pattern. A new genus Austroholorchis is erected in the Lepidapedinae, with A. sprenti (Gibson, 1987) n. comb. as the type-species. Its diagnostic features are its ani, infundibuliform oral sucker and the position of the ovary at about mid-level of the uterus. A. sprenti is illustrated, its hosts in Queensland waters being Sillago maculata, S, analis and S. ciliata. A, levis n. sp. is described from Sillago bassensis from south-western Western Australia. The genus Pseudaephnidiogenes Yamaguti, 1971 is placed in the Lepidapedinae. P. rhabdosargi (Prudhoe, 1956) from Rhabdosargus sarba from off Natal, South Africa is illustrated and the terminal genitalia of P. rhabdosargi from R. sarba and from R. holubi from off eastern Cape Province and Pseudaephnidiogenes vossi Bray, 1985 from Caffrogobius nudiceps from off eastern Cape Province, South Africa are illustrated. The genus Pseudoholorchis Yamaguti, 1958 is placed in the subfamily Lepocreadiinae. The terminal genitalia of P. pulcher (Manter, 1954) from Latridopsis ciliaris from New Zealand are illustrated, The genus Neolepocreadium Thomas, 1960 is placed in the Lepocreadiidae.

The influence of erbium:yttrium-aluminum-garnet laser ablation with variable pulse width on morphology and microleakage of composite restorations

The objective of this study was to evaluate the influence of various pulse widths with different energy parameters of erbium:yttrium-aluminum-garnet (Er:YAG) laser (2.94 mu m) on the morphology and microleakage of cavities restored with composite resin. Identically sized class V cavities were prepared on the buccal surfaces of 54 bovine teeth by high-speed drill (n = 6, control, group 1) and prepared by Er:YAG laser (Fidelis 320A, Fotona, Slovenia) with irradiation parameters of 350 mJ/ 4 Hz or 400 mJ/2 Hz and pulse width: group 2, very short pulse (VSP); group 3, short pulse (SP); group 4, long pulse (LP); group 5, very long pulse (VLP). All cavities were filled with composite resin (Z-250-3 M), stored at 37A degrees C in distilled water, polished after 24 h, and thermally stressed (700 cycles/5-55A degrees C). The teeth were impermeabilized, immersed in 50% silver nitrate solution for 8 h, sectioned longitudinally, and exposed to Photoflood light for 10 min to reveal the stain. The leakage was evaluated under stereomicroscope by three different examiners, in a double-blind fashion, and scored (0-3). The results were analyzed by Kruskal-Wallis test (P > 0.05) and showed that there was no significant differences between the groups tested. Under scanning electron microscopy (SEM) the morphology of the cavities prepared by laser showed irregular enamel margins and dentin internal walls, and a more conservative pattern than that of conventional cavities. The different power settings and pulse widths of Er:YAG laser in cavity preparation had no influence on microleakage of composite resin restorations.

Morphology and stability of aggregates of an Oxisol according to tillage system and gypsum application

Morphological characterization and aggregate stability is an important factor in evaluating management systems. The aim of this paper is to evaluate the stability and morphology of the aggregates of a dystrophic Oxisol managed with no-tillage and conventional tillage with and without the residual action of gypsum. The experimental design was randomized blocks arranged in split-split plot, where the treatments were two soil management systems (plots) with 0 and 2000 kg ha-1 of gypsum (subplots) and five depths (0-0.05, 0.05-0.10, 0.10-0.15, 0.15-0.20 and 0.20-0.30 m) as the subsubplots, with four replications. The aggregate morphology was determined through images and later evaluated by the Quantporo software. Stability was determined by the wet method. The results showed that the no-tillage system, with or without gypsum residual effect, provided the aggregates with the largest geometric diameters. The combination of no-tillage system and the gypsum residual effect provided rougher aggregates.

The effect of metal transfer stability (spattering) on fume generation, morphology and composition in short-circuit MAG welding

The main objective of this work was to evaluate the hypothesis that the greater transfer stability leads also to less volume of fumes. Using an Ar + 25%CO2 blend as shielding gas and maintaining constant the average current, wire feed speed and welding speed, bead-on-plate welds were carried out with plain carbon steel solid wire. The welding voltage was scanned to progressively vary the transfer stability. Using two conditions of low stability and one with high stability, fume generation was evaluated by means of the AWS F1.2:2006 standard. The influence of these conditions on fume morphology and composition was also verified. A condition with greater transfer stability does not generate less fume quantity, despite the fact that this condition produces fewer spatters. Other factors such as short-circuit current, arcing time, droplet diameters and arc length are the likely governing factors, but in an interrelated way. Metal transfer stability does not influence either the composition or the size/morphology of fume particulates. (c) 2014 Elsevier B.V. All rights reserved.