Influence of the sea state on Mediterranean heavy precipitation: a case-study from HyMeX SOP1

Sea state can influence the turbulent air–sea exchanges, especially the momentum flux, by modifying the sea-surface roughness. The high-resolution non-hydrostatic convection-permitting model MESO-NH is used here to investigate the impact of a more realistic representation of the waves on heavy precipitation during the Intense Observation Period (IOP) 16a of the first HyMeX Special Observation Period (SOP1). Several quasi-stationary mesoscale convective systems developed over the western Mediterranean region, two of them over the sea, and resulted in heavy precipitation on the French and Italian coasts on 26 October 2012. Three different bulk parametrizations are tested in this study: a reference case (NOWAV) without any wave effect, a parametrization taking into account theoretical wave effects (WAV) and a last one with realistic wave characteristics from the MFWAM analyses (WAM). Using a realistic wave representation in WAM significantly increases the roughness length and the friction velocity with respect to NOWAV and WAV. The three MESO-NH sensitivity experiments of the IOP16a show that this surface-roughness increase in WAM generates higher momentum fluxes and directly impacts the low-level dynamics of the atmosphere, with a slowdown of the 10 m wind, when and where the wind speed exceeds 10 m s−1 and the sea state differs from the idealized one. The turbulent heat fluxes are not significantly influenced by the waves, these fluxes being controlled by the moisture content rather than by the wind speed in the simulations. Although the convective activity is globally well reproduced by all the simulations, the difference in the low-level dynamics of the atmosphere influences the localization of the simulated heavy precipitation. Objective evaluation of the daily rainfall amount and of the 10 m wind speed against the observations confirms the positive impact of the realistic wave representation on this simulation of heavy precipitation.

Seasonal changes of heat and moisture fluxes from the Caspian Sea surface and its effect on synoptic systems with heavy rainfalls in southern shores of the sea during 2005-2010

Caspian Sea with its unique characteristics is a significant source to supply required heat and moisture for passing weather systems over the north of Iran. Investigation of heat and moisture fluxes in the region and their effects on these systems that could lead to floods and major financial and human losses is essential in weather forecasting. Nowadays by improvement of numerical weather and climate prediction models and the increasing need to more accurate forecasting of heavy rainfall, the evaluation and verification of these models has been become much more important. In this study we have used the WRF model as a research-practical one with many valuable characteristics and flexibilities. In this research, the effects of heat and moisture fluxes of Caspian Sea on the synoptic and dynamical structure of 20 selective systems associated with heavy rainfall in the southern shores of Caspian Sea are investigated. These systems are selected based on the rainfall data gathered by three local stations named: Rasht, Babolsar and Gorgan in different seasons during a five-year period (2005-2010) with maximum amount of rainfall through the 24 hours of a day. In addition to synoptic analyses of these systems, the WRF model with and without surface flues was run using the two nested grids with the horizontal resolutions of 12 and 36 km. The results show that there are good consistencies between the predicted distribution of rainfall field, time of beginning and end of rainfall by the model and the observations. But the model underestimates the amounts of rainfall and the maximum difference with the observation is about 69%. Also, no significant changes in the results are seen when the domain and the resolution of computations are changed. The other noticeable point is that the systems are severely weakened by removing heat and moisture fluxes and thereby the amounts of large scale rainfall are decreased up to 77% and the convective rainfalls tend to zero.

Emerging trends in the sea state of the Beaufort and Chukchi seas

The sea state of the Beaufort and Chukchi seas is controlled by the wind forcing and the amount of ice-free water available to generate surface waves. Clear trends in the annual duration of the open water season and in the extent of the seasonal sea ice minimum suggest that the sea state should be increasing, independent of changes in the wind forcing. Wave model hindcasts from four selected years spanning recent conditions are consistent with this expectation. In particular, larger waves are more common in years with less summer sea ice and/or a longer open water season, and peak wave periods are generally longer. The increase in wave energy may affect both the coastal zones and the remaining summer ice pack, as well as delay the autumn ice-edge advance. However, trends in the amount of wave energy impinging on the ice-edge are inconclusive, and the associated processes, especially in the autumn period of new ice formation, have yet to be well-described by in situ observations. There is an implicit trend and evidence for increasing wave energy along the coast of northern Alaska, and this coastal signal is corroborated by satellite altimeter estimates of wave energy.

Asexual origin of brooding in the sea anemones Actinia equina and A. schmidti: Molecular evidence from the portuguese shore

Reproduction by sexual or asexual viviparity is a common phenomenon in some anemone species. In this short communication, the origin of the brooded young of Actinia equina and A. schmidti from the Portuguese shore was investigated. DNA was extracted from 56 brooding adult Actinia sp. and the nuclear gene that codes for the 28S ribosomal subunit was sequenced. Species identity was then assessed using GenBank. In total, 50 individuals were A. schmidti, five were A. equina and one had a hybrid origin. Three adult anemones (the hybrid, one A. equina and one A. schmidti) possessed two different 28S sequences and so their offspring was selected for further analysis using the same molecular procedure. Each brooded polyp was found to possess the exact same sequence as its parent, strongly suggesting the asexual origin of broods in A. equina and A. schmidti.

Molecular biology of prolactin and prolactin receptor in a marine teleost: the sea bream(Sparus aurata)

Tese de dout. em Biologia, especialidade de Biologia Molecular, Unidade de Ciências e Tecnologias dos Recursos Aquáticos, Univ. do Algarve

West versus East Mediterranean Sea: origin and genetic differentiation of the sea cucumber Holothuria polii

We studied the genetic structure of the sea cucumber Holothuria (Roweothuria) polii (Delle Chiaje 1823) by analysing the mitochondrial DNA variation in two fragments of cytochrome oxidase I (COI) and 16S genes. Individuals were collected in seven locations along the Mediterranean Sea, which cover a wide range of the species distribution. We found high haplotype diversity for COI and moderate diversity for 16S, and low nucleotide diversity for both genes. Our results for the COI gene showed many recent and exclusive haplotypes with few mutational changes, suggesting recent or ongoing population expansion. The Western and Eastern Mediterranean populations exhibited slight but significant genetic differentiation (COI gene) with higher genetic diversity in the East. The most ancient haplotype was not present in the westernmost sampling location (SE Spain). The oldest expansion time was observed in Turkey, corresponding to mid-Pleistocene. Turkey had also the highest genetic diversity (number of total and exclusive haplotypes, polymorphisms, haplotype and nucleotide diversity). This suggests that this region could be the origin of the subsequent colonizations through the Mediterranean Sea, a hypothesis that should be assessed with nuclear markers in future research.

Living on the intertidal/subtidal edge: ecology of the stalked barnacle Pollicipes Pollicipes and of the sea urchin Paracentrotus lividus

This thesis contributes to the knowledge of temperate rocky shore ecology, with direct implications in the management and conservation of two important local marine resources that inhabit the very edge of subtidal and intertidal habitats on wave-swept rocky shores: the sessile filter feeding stalked barnacle Pollicipes pollicipes and the mobile keystone herbivore sea urchin Paracentrotus lividus. Research was conducted along gradients of wave exposure on rocky shores of Southern Europe. The abundance of P. lividus was four times higher in SW Portugal than in NW Italy. Most of the variation in urchin abundance occurred at small spatial scales, probably shaped by habitat complexity. In SW Portugal, sea urchin attachment forces while in burrows were measured and related to burrow shape, urchin size and habitat. Burrowing behaviour enhances sea urchin attachment force and might be an adaptive response to hydrodynamic stress. Abundance of P. pollicipes in SW Portugal is highly and positively related to wave exposure at local and regional scales. Predation and recruitment processes seem to be important drivers of these abundance patterns. A distribution model of P. pollicipes abundance in relation to wave exposure was developed for the SW coast of Portugal and might be used for improvement of its management and conservation. Growth of P. pollicipes was studied by applying a novel method using fluorescent calcein for marking and to estimate growth. Growth rate decreased with barnacle size and was highly variable amongst individuals, particularly in smaller barnacles. No effect of shore level on barnacle growth was detected. An assessment of the state of the fishery, conservation and management of the stalked barnacle in different regions of continental Portugal was made, highlighting an overall negative tendency of this state and recommending a change into a co-management system; Resumo: Viver no limite intertidal / subtidal: ecologia do percebe Pollicipes pollicipes e do ouriço-do-mar Paracentrotus lividus Esta tese contribui para o conhecimento da ecologia do litoral rochoso e tem implicações diretas na gestão e conservação de dois recursos marinhos locais que habitam o interface subtidal/intertidal de costas rochosas sujeitas a agitação marinha: o percebe Pollicipes pollicipes, animal séssil e filtrador e o ouriço-do-mar Paracentrotus lividus, animal móvel e herbívoro. Foram realizados vários estudos ao longo de gradientes de hidrodinamismo em costas rochosas do sul da Europa. A abundância de P. lividus foi quatro vezes superior no sudoeste de Portugal relativamente ao noroeste de Itália. Grande parte da variação na abundância de P. lividus ocorreu a pequenas escalas espaciais, provavelmente influenciada pela complexidade do habitat. A força com que o ouriço-do-mar se fixa ao substrato foi medida no terreno no sudoeste de Portugal, tendo esta sido relacionada com a forma da depressão que ocupa, o tamanho individual e o habitat. O comportamento escavador desta espécie aumenta a sua força de fixação ao substrato e poderá ser uma resposta adaptativa ao hidrodinamismo.. A abundância de P. pollicipes na costa sudoeste de Portugal, a diferentes escalas espaciais, está relacionada de forma positiva com a agitação marinha, e é influenciada pela predação e pelo recrutamento desta espécie. Foi desenvolvido um modelo de distribuição e abundância de P. pollicipes para esta costa baseado na relação com a agitação marinha, cujos resultados podem ser usados para melhorar a gestão e conservação deste recurso. Um novo método com recurso a calceina fluorescente foi desenvolvido para marcar percebes e estudar o seu crescimento. A taxa de crescimento diminuiu com o tamanho do animal, sendo altamente variável entre indivíduos, sobretudos nos de menores dimensões. O estado da apanha, conservação e gestão do percebe em diferentes regiões de Portugal Continental apresentou uma tendência global negativa, e recomenda-se uma alteração para um sistema de cogestão deste recurso.

Genetic diversity and population structure of the sea lamprey (Petromyzon marinus L.) across its distributional range

Lampreys are a group of ancient vertebrates with 360 million years of existence. Throughout their evolution, they have acquired local adaptations to the colonized habitats, showing high plasticity and adaptive capacities. The sea lamprey (Petromyzon marinus L.) is a parasitic and anadromous species that occurs in both sides of the North Atlantic. The aims of this study were to analyse, using microsatellite markers, the genetic diversity and population structure of sea lamprey throughout its distributional range. Analyses demonstrated consistent signs of high population differentiation between European and North American samples (two-groups structure), most probably due to isolation by distance, but low differentiation among populations from the same coast. The apparent lack of homing in this species is in line with its high evolutive success, as homing may bring adults back to natal habitats that have changed, or that are intermittently unfavourable. Analyses also demonstrated higher levels of genetic diversity in North American samples; DIVERSIDADE GENÉTICA E ESTRUTURA POPULACIONAL DA LAMPREIA-MARINHA (PETROMYZON MARINUS L.) AO LONGO DA SUA ÁREA DE DISTRIBUIÇÃO Resumo: As lampreias são organismos ancestrais com cerca de 360 milhões de anos de existência. No decorrer da longa escala evolutiva têm vindo a adquirir adaptações aos locais que colonizaram, tendo uma forte capacidade evolutiva e adaptativa. A lampreia-marinha (Petromyzon marinus L.) é uma espécie parasita e anádroma que ocorre em ambas as costas do Atlântico Norte. Este estudo teve como principal objetivo estudar a diversidade genética e a estrutura populacional desta espécie ao longo da sua área de distribuição, através do uso de microssatélites. Os resultados demonstraram forte divergência entre populações das costas Este e Oeste do Atlântico Norte, provavelmente devido à elevada distância entre populações, mas pouca diferenciação entre populações da mesma costa. A ausência de homing nesta espécie terá contribuído para o seu sucesso evolutivo, uma vez que o homing pode levar indivíduos a reproduzirem-se em habitats que se tornaram desfavoráveis ou intermitentemente inapropriados. Os resultados demonstraram também uma maior variabilidade genética nas populações americanas.

Bagasse Fractionation by the Soda Process

The soda process was the first chemical pulping method and was patented in 1845. Soda pulping led to kraft pulping, which involves the combined use of sodium hydroxide and sodium sulfide. Today, kraft pulping dominates the chemical pulping industry. However, about 10% of the total chemical pulp produced in the world is made using non-wood material, such as bagasse and wheat straw. The soda process is the preferred method of chemical pulping of non-wood materials, because it is considered to be economically viable on a small scale and for bagasse is compatible with sugarcane processing. With recent developments, the soda process can be designed to produce minimal effluent discharge and the fouling of evaporators by silica precipitation. The aim of this work is to produce bagasse fibres suitable for papermaking and allied applications and to produce sulfur-free lignin for use in specialty applications. A preliminary economic analysis of the soda process for producing commodity silica, lignin and pulp for papermaking is presented.

Submission to the House of Representatives Standing Committee on Environment and Heritage : Inquiry into a Sustainability Charter by the Cooperative Research Centre for Construction Innovation

The Cooperative Research Centre for Construction Innovation1 (hereafter called Construction Innovation) supports the notion of the establishment of a Sustainability Charter for Australia and is interested in working collaboratively to achieve this outcome. A number of challenges need to be addressed to develop this Charter. This submission outlines these challenges and possible responses to them by a Sustainability Commission.

Enhanced human bone marrow stromal cell affinity for modified poly(L-lactide) surfaces by the upregulation of adhesion molecular genes

To enhance and regulate cell affinity for poly (l-lactic acid) (PLLA) based materials, two hydrophilic ligands, poly (ethylene glycol) (PEG) and poly (l-lysine) (PLL), were used to develop triblock copolymers: methoxy-terminated poly (ethylene glycol)-block-poly (l-lactide)-block-poly (l-lysine) (MPEG-b-PLLA-b-PLL) in order to regulate protein absorption and cell adhesion. Bone marrow stromal cells (BMSCs) were cultured on different composition of MPEG-b-PLLA-b-PLL copolymer films to determine the effect of modified polymer surfaces on BMSC attachment. To understand the molecular mechanism governing the initial cell adhesion on difference polymer surfaces, the mRNA expression of 84 human extracellular matrix (ECM) and adhesion molecules was analysed using quantitative reverse transcriptase polymerase chain reaction (qRT-PCR). It was found that down regulation of adhesion molecules was responsible for the impaired BMSC attachment on PLLA surface. MPEG-b-PLLA-b-PLL copolymer films improved significantly the cell adhesion and cytoskeleton expression by upregulation of relevant molecule genes significantly. Six adhesion genes (CDH1, ITGL, NCAM1, SGCE, COL16A1, and LAMA3) were most significantly influenced by the modified PLLA surfaces. In summary, polymer surfaces altered adhesion molecule gene expression of BMSCs, which consequently regulated cell initial attachment on modified PLLA surfaces.