Factors Affecting Filterability

In this thesis the factors affecting lime mud filterability were studied. In the literature part there is information about recausticizing process, lime mud properties and filterability, and general filtration theory. In the experimental part the properties of lime mud particles and the properties of lime mud filter cake were investigated and the behavior of lime mud precoat was studied. The experiments were also carried out with R-PCC (rhombohedral precipitated calcium carbonate). The filtration and precoat studies were performed with a laboratory scale pressure filter. The pressure differences used were between 0.25-1.50 bars. Six different lime mud samples with varying amount of impurities and two R-PCC samples were used in the experiments. The average specific cake resistance of different lime mud samples varied quite extensively. The most influential factor affecting the lime mud filterability and dry solids content was found to be silica content. As the lime mud contained silica, the average specific cake resistance was high and the lime mud dryness was low. If the lime mud samples containing silica were not taken into account, the smaller the mean particle size, the higher the average specific cake resistance of the lime mud. The R-PCC had also a high average specific cake resistance, which was because of small particle size. In addition, the pressure difference affected the average specific cake resistance of some lime mud samples. In those cases lime mud was compressible material. During the precoat experiments the lime mud samples having the largest mean particle sizes, compressed. However, the average specific cake resistances of the filtration and precoat part were approximately the same magnitude. A brief displacement by air did not affect the behavior of the precoat. Instead, vibration and a brief but relatively great change in pressure difference had a slight influence.

Designing a new type of support for rotary kilns

Lime kiln is used as a part of the modern kraft pulp process in order to produce burnt lime from lime mud. This rotating kiln is supported by support rollers, which are traditionally supported by journal bearings. Since the continuous growth in the production of pulp mills requires larger lime kilns, the traditional bearing construction has become unreliable. The main problem especially involves the running-in phase of the bearings. In the present thesis, a new type of support roller was developed by using the systematic approach of machine design. Structural analysis was conducted on the critical parts of the selected structure by the finite element method. The operation of hydrodynamic bearings was examined by analytical methods. As a result of this work, a new type of support for rotating kilns was designed, which is more reliable and easier to service. A new support roller geometry is described, which pro¬vides for significant cost savings.

Ilmaan johdettavien päästöjen tarkkailun luotettavuus sellutehtaalla

Suomen ympäristönsuojelulaki (86/200) velvoittaa toiminnanharjoittajia olemaan selvillä päästöistään ja hakemaan ympäristöluvan ympäristön pilaantumisen vaaraa aiheuttavalle toiminnalle. Sellutehtaat tuottavat tietoa merkittävimmistä ilmaan johdettavista päästöistään mittaamalla niitä jatkuvatoimisesti. Tuloksia käytetään tiedottamisessa ja päätöksenteossa. Yksi tärkeimmistä käyttökohteista on ympäristöluvan ehtojen täyttymisen seuranta. Mittaustulosten on oltava luotettavia. Luotettavuutta voidaan arvioida vertailumittauksien ja mittausepävarmuustarkastelujen avulla. Tässä työssä määritettiin mittausepävarmuudet Imatran tehtaiden kuorikattilan (LCP-kattila) NOX-mittaukselle sekä sellutehtaan meesauunien ja soodakattiloiden mittauksille. Tämän jälkeen tarkasteltiin, kuinka mittausepävarmuus huomioidaan ympäristö¬luparajaseurannassa. Lopuksi arviointiin, kuinka jatkuvatoimisten mittalaitteiden laadunvarmistusstandardia SFS-EN 141481 voidaan soveltaa Imatran tehtailla. Tarkastellut jatkuvatoimiset mittaukset todettiin varsin luotettaviksi. Etenkin NOx¬mittaukset ovat luotettavia. Kuorikattila 2:lla luotettavuutta heikentää mittauspaikan epä¬edustavuus. Rikin yhdisteiden (SO2 ja TRS) mittausten luotettavuus on alhaisempi, koska mitattavat pitoisuudet ovat pieniä. Mittausten luotettavuus on kuin vertailumittausten. Kuorikattila 2:lla Mittausepävarmuus huomioidaan NOX-pitoisuuden lupaseurannassa LCP-asetuksen mukaisesti. Sellutehtaan TRS-päästöillä mittausepävarmuus voidaan huomioida joko LCP-asetuksen mukaisesti tai tilastomatemaattisesti. Kummallakin tavalla saadaan negatiivisia luparajaan verrattavia keskiarvoja. Standardia SFS-EN 141481 voidaan soveltaa kuorikattilalla mutta sellutehtaalla se voi olla epäkäytännöllistä, eikä välittömästi paranna mittausten luotettavuutta

Determinação condutométria de carbonato residual do calcário aplicado no solo por análise em fluxo

The objective of this study was to evaluate a flow injection system for determination of residual CO3(2-) in soil amended with lime material. It was used a closed system were the CO2 released from soil sample acidified with 0.5 mol L-1 HCl was capted in a 0.2 mol L-1 NaOH solution. After 16h the capted CO2 was determined by conductivimetry using a flow injection system. The results obtained by the proposed method were significantly correlated with those reported in soil samples used by the International Soil Analytical Exchange Programe. The regression equation was: y = 0.987x -- 0.075 r = 0.996, P > 0.01. For acid soils amended with CaCO3 the method showed a deviation error of 2.7%, detection limit was 0.077 mmol kg-1 of CO3(2-), and a recovery of 99.7% of the total CO3(2-) added in soil sample. The method was easily adapted for routine determination of residual CO3(2-) in soil samples with an analytical frequency of 40 samples per hour.

Determinação em fluxo do carbonatoresidual do solo empregando pervaporação

The objective of this study was to develop a method for the direct determination of residual CO3(2-) in acid soil using a flow system coupled with pervaporation. The gas released from the acidified sample was separated though a hydrophobic membrane and detected by conductivimetry. The detection limit was 0.054 mmol c kg-1 for CO2/CO3(2-) with relative error of 3.1%. The analytical frequency was 20 samples per hour. The method is recommended for studying the reactions and kinetics of lime applied in acid soils.

Incorporação de CuSO4 residual em argamassa, como método de disposição final

Residual CuSO4 was incorporated into the mass utilized for cement preparation. To a cement mass with 1:0.5:5 of cement, lime and sand to 0.25, 0.50, 0.75 and 1.00% of residual CuSO4 were added. The sulfate was mixed separately with lime and water to induce metal precipitation. The hardened test bodies were submerged in Milli-Q water for three months. No Cu was detected in the water by Atomic Absorption Spectrometry. The best proportion for mechanical resistance and porosity is 0.50%. The cement is adequate for non-structural objects.

Kalkin sammutus kalsiumkarbonaatin saostuksessa

Tässä työssä tutkittiin sammutetun kalkin vaikutusta kalsiumkarbonaatin saostamiseen ja saostetun kalsiumkarbonaatin ominaisuuksiin. Työn kirjallisuusosa käsittelee mm. kalkin sammutusta yleisesti, sammutuslaitteita, sammutetun kalkin ominaisuuksiin ja agglomeroitumiseen vaikuttavia tekijöitä sekä partikkelikoon analyysimenetelmiä. Kirjallisuusosan mukaan sammutusolosuhteilla sekä sammutuslaitteilla on vaikutusta sammutetun kalkin ominaisuuksiin. Työn kokeellisessa osassa tutkittiin kalkin sammutuksen vaikutusta kalsiumkarbonaatin saostamiseen sekä saostetun kalsiumkarbonaatin ominaisuuksiin. Sammutuskokeet tehtiin neljällä eri sammutuslaitteella ja sammutettavina kalkkeina käytettiin neljää ominaisuuksiltaan erilaista poltettua kalkkia. Karbonoinnit suoritettiin sekä laboratorio- että pilot-laitteilla. Lisäksi tutkittiin neljän lisäaineen; natriumdodekyylisulfaatin, trietanoliamiinin, lignosulfonaatin sekä sakkaroosin vaikutusta kalkin sammuttamiseen sekä miten lisäaineen käyttäminen sammutuksessa vaikuttaa kalsiumkarbonaatin saostamiseen. Tulosten perusteella kalkin sammutuksella on vaikutusta kalsiumkarbonaatin saostamiseen ja saostetun kalsiumkarbonaatin ominaisuuksiin. Eri sammutusmenetelmillä sammutetuilla kalkeilla on mm. erilainen vaikutus karbonointiaikaan. Myös lisäaineet vaikuttavat mm. sammutetun kalkin ominaispinta-alaan ja partikkelin muotoon. Lisäaineet lisäksi pidentävät karbonointiaikaa ja vaikuttavat saostettujen kalsiumkarbonaattipartikkeleiden agglomeroitumiseen.

Descrições de técnicas da química na produção de bens de acordo com os relatos dos naturalistas viajantes no Brasil colonial e imperial

European naturalists explored Brazil in long scientific expeditions and published accounts that make up a rich and still largely untapped historiographic source for the understanding of the history of chemistry. The production of indigo dye, the manufacture of limestone, extraction and purification of saltpeter and the production of salt are discussed. Lime was used to whitewash walls and, mixed with whale oil, as cement to glue stones in buildings of the colonial period. It was prepared by burning seashells in specifically designed ovens. Saltpeter was produced by reacting naturally occurring calcium and magnesium nitrate with potassium-rich wood ashes to yield KNO3. NaCl was obtained by evaporating seawater under the sun. Indigo, a native plant, was cultivated and processed to produce the renowned dye, which was exported to Europe.

Arsenic mobilization from sulfidic materials from gold mines in Minas Gerais State

Acid drainage results from exposition of sulfides to the atmosphere. Arsenopyrite is a sulfide that releases arsenic (As) to the environment when oxidized. This work evaluated the As mobility in six sulfidic geomaterials from gold mining areas in Minas Gerais State, Brazil. Grained samples (<2 mm) were periodically leached with distilled water, during 70 days. Results suggested As sorption onto (hydr)oxides formed by oxidation of arsenopyrite. Low pH accelerated the acid generation, dissolving Fe oxihydroxides and releasing As. Presence of carbonates decreased oxidation rates and As release. On the other hand, lime added to a partially oxidized sample increased As mobilization.

Óleo essencial de limão no ensino da cromatografia em camada delgada

This paper describes a simple experiment employing the essential oil of limes which can be applied in undergraduate organic chemistry laboratory classes for the teaching of thin layer chromatography (TLC). The experiment consists in submit lime peel oil to TLC separation employing hexane and dichloromethane as the eluents and five different systems for visualization of the chromatogram. In one experiment it is possible to teach the different variables of the TLC technique. This experiment may also be performed following vapor distillation and liquid-liquid extraction technique in experimental classes.

Efecto del secado térmico y el tratamiento alcalino en las características microbiológicas y químicas de biosólidos de plantas de tratamiento de aguas residuales domésticas

We evaluated the effect of thermal drying (60 to 75 ºC and times from 0 to 12.58 h) and alkaline treatment (Ca(OH)2 and CaO at doses from 8 to 10%.) on the microbiological and chemical characteristics of biosolids from the Cañaveralejo WWTP. The results showed that in thermal drying all temperatures studied were sufficient to achieve the sanitation of biosolids. In the alkaline treatment the two types of lime showed the total elimination of fecal coliforms, E. coli and helminth eggs, however, the process of alkalization of biosolids had significant influences on organic carbon and calcium.

Woody Gall symptoms in different citrus species and varieties artificially colonized by the citrus brown aphid Toxoptera citricidus

Seedlings of 41 different citrus species and varieties were massively colonized with the citrus brown aphid Toxoptera citricidus, obtained from Pêra sweet orange (Citrus sinensis) trees, presenting symptoms of the "Capão Bonito" complex of the Citrus tristeza virus (CTV). The objective was to evaluate resistance or tolerance of the varieties to that virus complex, but even after eight months of inoculation no stem pitting was observed in the plants. Otherwise, the presence of galls similar to those induced by the vein enation-woody gall disease was observed in 73% of the plants of Volkamer Palermo (Citrus volkameriana), 60% of the Volkamer Catania 2, 2% of the Rangpur Lime D.22.30 (Citrus limonia), 13% of the Volkamer Australian Red, the Rangpur Lime hybrid, the Orlando tangelo (Citrus reticulata x Citrus paradisi) and the Florida Rough lemon (C. jambhiri), and 7% of the Carrizo citrange (Poncirus trifoliata x Citrus sinensis). The highest incidence and the largest gall size were observed in the Palermo Volkamer showing that this clone would be the most suitable to be used as an indicator plant in biological indexing tests for the disease. There are no previous reports in the literature about the occurrence of woody galls in Orlando tangelo and Carrizo citrange.

Biokaasulaitoksen rejektivesien vaikutus jätevedenpuhdistamon toimintaan ja rejektivesien esikäsittelyn tarpeellisuus

Diplomityön tavoitteena oli tutkia biokaasulaitoksen rejektivesien ominaisuuksiin vaikuttavia tekijöitä ja rejektiveden esikäsittelyn tarpeellisuutta. Lisäksi tavoitteena oli tarkastella Kouvolaan suunnitteilla olevan Kymen Bioenergia Oy:n biokaasulaitoksen rejektivesien vaikutusta Kouvolan Veden Mäkikylän jätevedenpuhdistamolla. Biokaasulaitoksen rejektivedet ovat yhdyskuntajätevesiin verrattuna selvästi konsentroituneempia. Jätevedenpuhdistamoilla erityisesti rejektiveden korkea typpipitoisuus aiheuttaa lisäkuormitusta. Suomessa toiminnassa oleville biokaasulaitoksille tehdyn kyselytutkimuksen tulosten perusteella rejektiveden typpipitoisuuteen vaikuttaa syötteen typpipitoisuus sekä mädätysjäännöksen kuivauksen tehokkuus. Rejektiveden kiintoainepitoisuudella on puolestaan vaikutusta biologiseen hapenkulutukseen ja välillisesti myös rejektiveden kemialliseen hapenkulutukseen. Rejektivesien jätevedenpuhdistamoilla aiheuttamaa kuormitusta on mahdollista vähentää esikäsittelemällä rejektivedet joko biologisella tai fysikaalis-kemiallisella puhdistusmenetelmällä. Kyselytutkimus kuitenkin osoitti, että rejektivesien esikäsittelyssä ei aina päästä puhdistustavoitteeseen. Jätevedenkäsittelyn sijaan rejektivesiä on mahdollista käyttää lannoitteena, mikäli biokaasulaitoksen syöte ei sisällä jätevedenpuhdistamon lietteitä. Myös Kouvolan Veden Mäkikylän puhdistamolla biokaasulaitoksen rejektivedet tulevat lisäämään merkittävästi tulovirtaaman typpikuormaa. Typpikuorman lisäys edellyttää ilmastusaltaassa ilmastuksen tehostamista sekä kalkin syöttömäärän lisäämistä, jotta jäteveden happipitoisuus ja pH pysyvät typenpoistoreaktioille suotuisina. Lisäksi tulovirtaamasta puolet tullaan ohjaamaan esiselkeyttimen ohi, jotta ilmastusaltaassa on orgaanista ainetta typenpoistoon riittävästi. Mäkikylän puhdistamon typenpoistokapasiteettia on mahdollista kasvattaa lisähiilen syötöllä. Mikäli biokaasulaitoksen kapasiteettilisäyksen jälkeen rejektivesien typpikuoma ylittää lisähiilellä saavutetun lisäkapasiteetin, on rejektivedet esikäsiteltävä.

Characterization of Citrus tristeza virus isolates from grapefruit (Citrus paradisi Macf.) accessions of Citrus Active Germplasm Bank

Citrus tristeza virus (CTV) isolates from 35 grapefruit accessions belonging to Citrus Active Germplasm Bank of the "Instituto Agronômico de Campinas" located at the "Centro APTA Citros Sylvio Moreira", Cordeirópolis, São Paulo state, Brazil, were characterized and evaluated through symptoms in the trees, biological indexing, immunological diagnosis with different monoclonal antibodies and SSCP analysis (single-strand conformation polymorphism) of the coat protein gene. Symptomatology indicated that, in general, the group of plants with smaller canopy volume and severe stem pitting differed significantly from the group that presented greater vegetative development and mild to moderate stem pitting. However, the isolates from most of the accessions induced mild reaction on Mexican lime. The serological evaluation through the DAS-ELISA using monoclonal antibodies did not reveal any association between virus titer in the plant tissue and symptoms. The reaction with different monoclonal antibodies and the distinct electrophoresis patterns obtained through SSCP showed that there is a high degree of diversity among the isolates that infect these grapefruit accessions. High complexity within the same isolate was also observed in the SSCP profiles. This finding indicates that the CTV isolates from these plants are a complex mixture of CTV haplotypes. Similar SSCP banding patterns were observed among some plants with strong stem pitting symptoms, and among some plants with weak or moderate stem pitting symptoms.

Operational characteristics of four metering systems for agricultural fertilizers and amendments

The use of fertilizers and solid amendments in agriculture generates special interest for their effect on crop productivity, as well as for their environmental impact. The efficient use of these products demands knowing their physical and mechanical properties, the storing conditions effect and the operational characteristics of the metering systems used in the fertilizing equipment. In this context, the present study was developed with the purpose of evaluating the operational characteristics of different fertilizing metering systems and to determine the adequate metering system-product operational parameters, using powder lime, powder gypsum, granular 10-30-10 (N-P-K), and granular urea. Operational differences were established among four types of commercial fertilizer metering systems, including wire auger, star-shaped feed wheel, feed screw and ridged traction wheel. The study found that the unloading rate depends directly on the fertilizer metering system's rotating speed and is affected by particle size, repose angle, bulk density and moisture content of the applied product. The wire auger and star-shaped feed wheel metering systems were adequate for the distribution of powder products and the feed screw for granulated fertilizers. Furthermore, theoretical and experimental characteristic equations were established, defining curves for calibration and handling of the products plus the rotating speed range in which a better distributing behavior was achieved.