The stock structure of grey mackerel Scomberomorus semifasciatus in Australia as inferred from its parasite fauna

The scombrid Scomberomorus semifasciatus is an important component of inshore fisheries in tropical Australia. Data on the parasite fauna of 593 fish from areas off northern and eastern Australia were examined for evidence of discrete fish populations. The parasites used were juveniles of Pterobothrium pearsoni, Callitetrarhynchus gracilis, Anisakis simplex (sensu latu) and Terranova sp. Tukey Kramer pairwise comparisons gave significant differences in the abundances of two or more parasites between fish from the east coast, the eastern Gulf of Carpentaria and the remainder of northern Australia. Multivariate analysis gave further evidence of differences and the results suggest that at least 4 populations or stocks of grey mackerel occur along the northern and eastern coastline of Australia.

Chloris gayana, Rhodes Grass 'KP4'

‘KP4’ is based on selected F4 progeny of 8 plants showing a low, creeping, tight-matted, late flowering growth habit. The original parental breeding population was selected from among 1600 diploid Rhodes grass seedlings grown as spaced plants; seven of the selected parental plants were from ‘Katambora’ and the eighth (which did not contribute as a maternal parent beyond the F1 generation) was a seedling from an unreleased accession. Four (4) cycles of mass selection were conducted, in which the selected plants from the previous generation were allowed to inter-cross in isolation in the field, and the resultant progeny later grown as spaced plants in the field for the next cycle of selection. Selection was for the following attributes: prostrate creeping early growth habit with short stolon internodes resulting in a dense stolon mat; leafy appearance; fine leaf and stem; and late flowering (i.e. a long period of vegetative growth before flowering). ‘KP4’ is a synthetic Rhodes grass cultivar multiplied from the selected fourth-generation plants produced by this line of breeding. Breeder: Donald S. Loch, Cleveland, QLD. PBR Certificate Number 3661, Application Number 2006/189, granted 16 December 2008

Läksi puut ylenemähän : Metsien hoidon historia Suomessa keskiajalta metsäteollisuuden läpimurtoon 1870-luvulla

Tutkimuksen tavoitteena on historiantutkimuksen menetelmiä käyttäen selvittää metsänhoidon teorian sekä käytännön metsänhoidon kehitysvaiheet ja näihin vaikuttaneet tekijät, keskiajalta lähtien 1870-luvulla tapahtuneeseen metsäteollisuuden läpimurtoon saakka. Tutkimus tarkastelee Suomen metsiä, niiden käyttöä ja metsänhoidon alkuvaiheita Ruotsin ja Venäjän vallan aikoina. Vastauksia haetaan erityisesti seuraaviin pääkysymyksiin: - miten eri metsänkäyttömuodot ja -käyttäjät vaikuttivat metsiin ja metsänhoidon edistymiseen? - millä tavoin maanomistuksen kehitys vaikutti metsien käyttöön ja hoitoon? - millaisiin päämääriin ja yhteiskunnallisiin taustatekijöihin metsien käytön julkinen ohjaus perustui? - mitä käytännön vaikutuksia valtion metsäpolitiikalla ja ohjauksella oli metsänhoidon kehitykseen? - missä ja miten kehittyivät Suomessa sovellettu metsänhoidon teoria ja käytännön menetelmät? - mitkä tekijät säätelivät metsänhoidon teorioiden soveltamista käytäntöön? - mikä oli naapurimaiden metsänhoidon sekä kansainvälisten yhteyksien merkitys metsänhoidon kehitykselle Suomessa? - miten vuosisatainen pelko metsien ja puun loppumisesta vaikutti metsänhoidon kehitykseen? - millainen merkitys puun arvon kehityksellä oli metsänhoidon alkuun saattamiselle ja edistymiselle? Suomessa harjoitettiin 1870-luvulle saakka pääasiassa talonpoikaista metsänkäyttöä. Maaseudun väestö hankki toimeentulonsa metsistä eränkäynnin, kaskiviljelyn, laiduntamisen, rakennushirsien valmistamisen, tervantuotannon ja paikoin myös potaskan tai sysien valmistamisen avulla. Erityisesti rannikkoseuduilla tuotettiin "isorakennuksen puita", lehtereitä, mastopuita ja muuta erikoispuutavaraa. Lautojen ja lankkujen sahaus laajeni vähitellen, saavuttaen 1800-luvun lopulla hallitsevan aseman myyntiin tarkoitettujen metsäntuotteiden tuotannossa. Polttopuun sekä muun kotitarvepuun kulutus säilyi suurimpana puunkäytön ryhmänä pitkälle 1900-luvulle saakka. Mainituista metsänkäyttömuodoista erityisesti kaskeaminen ja sitä seuraava laiduntamisvaihe sekä tervaspuiden koloaminen "autioittivat" laajoja metsäalueita. Tiheimmin asutuilla seuduilla esiintyi pulaa poltto- ja rakennuspuusta myöhäiskeskiajalta alkaen. Nämä ongelmat sekä laivanrakennuksen ja vuoriteollisuuden puunsaannin turvaamisen tarve johtivat 1600-luvun puolivälissä pysyvään metsänkäytön julkiseen ohjaukseen. Tuolloin Ruotsin valtakunnan metsälainsäädännön kivijalaksi tuli kestävyyden periaate, josta kruunu kylläkin joutui tinkimään moneen otteeseen. Valtion jatkuva rahantarve oli käytännössä metsäpolitiikan tärkein taustavoima sekä Ruotsin vallan että autonomian aikana. Jo 1600-luvulla ruvettiin vaatimaan talonpoikien yhteismaiden jakamista omistajilleen vastuullisemman metsänkäytön nimissä. Isoajakoa saatiin Suomessa odottaa 1770-luvulle saakka. Etelä-Suomessa se valmistui melko nopeasti, 1800-luvun puoliväliin mennessä. Sillä olikin myönteinen, metsien säästävämpään käsittelyyn johtava vaikutus. Valtiosta tuli isonjaon myötä erityisesti Pohjois-Suomessa merkittävä metsänomistaja 1800-luvun jälkipuoliskolla. Valtion metsähallinto, jota maaherrat ja sivistyneistö vaativat perustettavaksi jo 1700-luvun puolivälissä, aloitti toimintansa maanlaajuisesti 1860-luvulla. Se oli ensimmäinen merkittävä metsänhoidon organisaatio, ja vasta sen myötä metsänkäyttöä ohjaavilla säädöksillä ja ohjeilla alkoi olla käytännön merkitystä. Yksityismetsiä varten ei tällaista organisaatiota vielä perustettu, niitä rasittivat pahoin nousevan sahateollisuuden määrämittahakkuut pitkälle 1900-luvun puolelle. Turun Akatemiassa tehtiin mittavaa metsänhoidon menetelmiä koskevaa sekä myös metsäpoliittista tutkimustyötä 1700-luvun jälkipuoliskolla. Tulokset eivät vielä sanottavasti siirtyneet käytäntöön, lähinnä puun alhaisen arvon ja tarvittavien organisaatioiden puuttumisen takia. Kun valtion metsähallintoa ja Suomen omaa metsäopetusta ryhdyttiin perustamaan 1800-luvun puolivälissä, haettiin metsänhoidon mallia alan johtavaksi maaksi kehittyneestä Saksasta. Tultaessa 1870-luvulle, oli Evolla jo käynnissä voimakas kehitystyö maamme olosuhteisiin soveltuvien menetelmien luomiseksi saksalaisen teorian pohjalta. Metsänhoidon tiedot ja taidot olisivat jo tässä vaiheessa riittäneet kestävän metsätalouden harjoittamiseen kaikkien omistajaryhmien metsissä, jos tarvittavat organisaatiot olisi kyetty perustamaan ja metsäammattilaisia olisi koulutettu tarpeeksi. Metsänhoidon kehitystä hidastivat 1800-luvun lopulla lähinnä valtion heikko talous ja poliittiset näkemyserot. Metsäteollisuuden 1870-luvulta alkanut voimakas kasvu ja lisääntyvä puuntarve pakottivat kuitenkin valtiovallan pitämään huolta puuntuotannon jatkuvuudesta. Metsäteollisuuden kasvavan viennin kautta lisääntyvät verotulot ja kan-santalouden myönteinen kehitys antoivat vähitellen mahdollisuuden metsänhoidon edistämiseen ammattilaisten koulutuksen, kansalaisten neuvonnan, lainsäädännön ja viranomaisten toiminnan kautta. Tämä tutkimus lähestyy aihettaan metsähistorian, taloushistorian, yhteiskuntahistorian ja ympäristöhistorian näkökulmista. Ajankohtaista merkitystä sillä on kehitysmaiden sekä Itä-Euroopan siirtymätalouksien metsänhoidon edistämiselle, missä suomalaiset metsäammattilaiset ovat mukana lukuisten kehityshankkeiden asiantuntijoina. Kymmenissä maissa metsätalous kamppailee samanlaisten ongelmien kanssa kuin Suomessa ja naapurimaissa 100 - 300 vuotta sitten. Meidän kokemuksistamme on näille kansantalouksille hyötyä valtion- ja yksityismetsätalouden metsänhoito-organisaatioita sekä metsälainsäädäntöä kehitettäessä.

Effect of LHRH agonists and antagonists in male and female bonnet monkeys (Macaca Radiata)

A few analogues of LHRH have been tested in the adult bonnet monkeys using change in serum testosterone following LHRH injection as a parameter of response to LHRH. Of the four analogues tested in male monkeys, Buserelin was found to be the most potent one in increasing serum testosterone levels. Injection of the LHRH antagonist at 1600 h resulted in the abolition of the characteristic nocturnal surge of testosterone observed in adult bonnet monkeys maintained under regulated light conditions. Following administration of LHRH a/s during early pregnancy, serum chorionic gonadotropin levels decreased though the course of pregnancy was not affected. These results suggest that bonnet monkey can be successfully employed to test LHRH analogues.

The great errand 1939-1955

The novel was written in 2001. Description of post-war Germany from the viewpoint of a German, Fritz Meyer, who was a member of a local Nazi Youth organization in Sonneborn. He fought as a soldier and fell into the hands of the English in Northern France. He was taken to Canada as a prisoner of war. He escaped the camp and found refuge at a German family. Description of erotic encounters. Reflection on Nazi ideology. At the request of the family he returns to Germany for something subscribed as "the great errand", taking up the identity of a former American G.I. Desolation of post-war Germany. Confrontation with British emigre soldiers. Identifying with the anger of his German countrymen. Reflection on the Bible and the denial of the Jewish roots of Christianity. Creating an underground network of conspiracy with former Nazi leaders and high members of the Catholic church in order to continue the ideals of National Socialism. Donations from secret supporters abroad. Connections with the political leaders in the newly established German Republic. Revisionist history.

Cattle herd inspections and fly trapping for the detection of the Old World screw-worm fly (Chrysomya bezziana)

ObjectivesTo compare the sensitivity of inspections of cattle herds and adult fly trapping for detection of the Old World screw-worm fly (OWS). ProceduresThe incidence of myiases on animals and the number of OWS trapped with LuciTrap (R)/Bezzilure were measured concurrently on cattle farms on Sumba Island (Indonesia) and in peninsular Malaysia (two separate periods for the latter). The numbers of animal inspections and traps required to achieve OWS detection at the prevalent fly densities were calculated. ResultsOn Sumba Island, with low-density OWS populations, the sensitivity of herd inspections and of trapping for OWS detection was 0.30 and 0.85, respectively. For 95% confidence of detecting OWS, either 45 inspections of 74 animals or trapping with 5 sets of 4 LuciTraps for 14 days are required. In Malaysia, at higher OWS density, herd inspections of 600 animals (twice weekly, period 1) or 1600 animals (weekly, period 2) always detected myiases (sensitivity = 1), while trapping had sensitivities of 0.89 and 0.64 during periods 1 and 2, respectively. For OWS detection with 95% confidence, fewer than 600 and 1600 animals or 2 and 6 LuciTraps are required in periods 1 and 2, respectively. ConclusionsInspections of cattle herds and trapping with LuciTrap and Bezzilure can detect OWS populations. As a preliminary guide for OWS detection in Australia, the numbers of animals and traps derived from the Sumba Island trial should be used because the prevailing conditions better match those of northern Australia.

Magmatic evolution of topaz-bearing granite stocks within the Wiborg rapakivi granite batholith

This study brings new insights into the magmatic evolution of natural F-enriched peraluminous granitic systems. The Artjärvi, Sääskjärvi and Kymi granite stocks within the 1.64 Ga Wiborg rapakivi granite batholith have been investigated by petrographic, geochemical, experimental and melt inclusion methods. These stocks represent late-stage leucocratic and weakly peraluminous intrusive phases typical of rapakivi granites worldwide. The Artjärvi and Sääskjärvi stocks are multiphase intrusions in which the most evolved phase is topaz granite. The Kymi stock contains topaz throughout and has a well-developed zoned structure, from the rim to the center: stockscheider pegmatite equigranular topaz granite porphyritic topaz granite. Geochemically the topaz granites are enriched in F, Li, Be, Ga, Rb, Sn and Nb and depleted in Mg, Fe, Ti, Ba, Sr, Zr and Eu. The anomalous geochemistry and mineralogy of the topaz granites are essentially magmatic in origin; postmagmatic reactions have only slightly modified the compositions. The Kymi equigranular topaz granite shows the most evolved character, and the topaz granites at Artjärvi and Sääskjärvi resemble the less evolved porphyritic topaz granite of the Kymi stock. Stockscheiders are found at the roof contacts of the Artjärvi and Kymi stocks. The stockscheider at Artjärvi is composed of biotite-rich schlieren and pegmatite layers parallel to the contact. The schlieren layering is considered to have formed by velocity-gradient sorting mechanism parallel to the flow, which led to the accumulation of mafic minerals along the upper contact of the topaz granite. Cooling and contraction of the topaz granite formed fractures parallel to the roof contact and residual pegmatite magmas were injected along the fractures and formed the pegmatite layers. The zoned structure of the Kymi stock is the result of intrusion of highly evolved residual melt from deeper parts of the magma chamber along the fractured contact between the porphyritic granite crystal mush and country rock. The equigranular topaz granite and marginal pegmatite (stockscheider) crystallized from this evolved melt. Phase relations of the Kymi equigranular topaz granite have been investigated utilizing crystallization experiments at 100 to 500 MPa as a function of water activity and F content. Fluorite and topaz can crystallize as liquidus phases in F-rich peraluminous systems, but the F content of the melt should exceed 2.5 - 3.0 wt % to facilitate crystallization of topaz. In peraluminous F-bearing melts containing more than 1 wt % F, topaz and muscovite are expected to be the first F-bearing phases to crystallize at high pressure, whereas fluorite and topaz should crystallize first at low pressure. Overall, the saturation of fluorite and topaz follows the reaction: CaAl2Si2O8 (plagioclase) + 2[AlF3]melt = CaF2 (fluorite) + 2Al2SiO4F2 (topaz). The obtained partition coefficient for F between biotite and glass D(F)Bt/glass is 1.89 to 0.80 (average 1.29) and can be used as an empirical fluormeter to determine the F content of coexisting melts. In order to study the magmatic evolution of the Kymi stock, crystallized melt inclusions in quartz and topaz grains in the porphyritic and the equigranular topaz granites and the marginal pegmatite were rehomogenized and analyzed. The homogenization conditions for the melt inclusions from the granites were 700 °C, 300 MPa, and 24 h, and for melt inclusions from the pegmatite, 700 °C, 100 MPa, and 24/96 h. The majority of the melt inclusions is chemically similar to the bulk rocks (excluding H2O content), but a few melt inclusions in the equigranular granite show clearly higher F and low K2O contents (on average 11.6 wt % F, 0.65 wt % K2O). The melt inclusion compositions indicate coexistence of two melt fractions, a prevailing peraluminous and a very volatile-rich, possibly peralkaline. Combined petrological, experimental and melt inclusion studies of the Kymi equigranular topaz granite indicate that plagioclase was the liquidus phase at nearly water-saturated (fluid-saturated) conditions and that the F content of the melt was at least 2 wt %. The early crystallization of biotite and the presence of muscovite in crystallization experiments at 200 MPa contrasts with the late-stage crystallization of biotite and the absence of muscovite in the equigranular granite, indicating that crystallization pressure may have been lower than 200 MPa for the granite.

Environmental change and anthropogenic impact on lake sediments during the Holocene in the Finnish - Karelian inland area

This thesis discusses the prehistoric human disturbance during the Holocene by means of case studies using detailed high-resolution pollen analysis from lake sediment. The four lakes studied are situated between 61o 40' and 61o 50' latitudes in the Finnish Karelian inland area and vary between 2.4 and 28.8 ha in size. The existence of Early Metal Age population was one important question. Another study question concerned the development of grazing, and the relationship between slash-and-burn cultivation and permanent field cultivation. The results were presented as pollen percentages and pollen concentrations (grains cm 3). Accumulation values (grains cm 2 yr 1) were calculated for Lake Nautajärvi and Lake Orijärvi sediment, where the sediment accumulation rate was precisely determined. Sediment properties were determined using loss-on-ignition (LOI) and magnetic susceptibility (k). Dating methods used include both conventional and AMS 14C determinations, paleomagnetic dating and varve choronology. The isolation of Lake Kirjavalampi on the northern shore of Lake Ladoga took place ca. 1460 1300 BC. The long sediment cores from Finland, Lake Kirkkolampi and Lake Orijärvi in southeastern Finland and Lake Nautajärvi in south central Finland all extended back to the Early Holocene and were isolated from the Baltic basin ca. 9600 BC, 8600 BC and 7675 BC, respectively. In the long sediment cores, the expansion of Alnus was visible between 7200 - 6840 BC. The spread of Tilia was dated in Lake Kirkkolampi to 6600 BC, in Lake Orijärvi to 5000 BC and at Lake Nautajärvi to 4600 BC. Picea is present locally in Lake Kirkkolampi from 4340 BC, in Lake Orijärvi from 6520 BC and in Lake Nautajärvi from 3500 BC onwards. The first modifications in the pollen data, apparently connected to anthropogenic impacts, were dated to the beginning of the Early Metal Period, 1880 1600 BC. Anthropogenic activity became clear in all the study sites by the end of the Early Metal Period, between 500 BC AD 300. According to Secale pollen, slash-and-burn cultivation was practised around the eastern study lakes from AD 300 600 onwards, and at the study site in central Finland from AD 880 onwards. The overall human impact, however, remained low in the studied sites until the Late Iron Age. Increasing human activity, including an increase in fire frequency was detected from AD 800 900 onwards in the study sites in eastern Finland. In Lake Kirkkolampi, this included cultivation on permanent fields, but in Lake Orijärvi, permanent field cultivation became visible as late as AD 1220, even when the macrofossil data demonstrated the onset of cultivation on permanent fields as early as the 7th century AD. On the northern shore of Lake Ladoga, local activity became visible from ca. AD 1260 onwards and at Lake Nautajärvi, sediment the local occupation was traceable from 1420 AD onwards. The highest values of Secale pollen were recorded both in Lake Orijärvi and Lake Kirjavalampi between ca. AD 1700 1900, and could be associated with the most intensive period of slash-and-burn from AD 1750 to 1850 in eastern Finland.

Catalyzed air oxidation for treatment of thiosalt effulents

Continuous slurry reactor runs of two to four weeks duration were carried out for catalyzed air oxidation of thiosalts under a variety of conditions using poly (4-vinylpyridine) - Cu (II) and quaternized poly (4-vinylpyridine) - Cu (II) catalysts. Results obtained indicate that these catalysts have high activity and relatively long-term catalyst stability for thiosalt waste streams of < 1000 ppm thiosalt level. Using 2% (w/w) slurries of the poly (4-vinylpyridine) Cu (II) catalyst, effective oxidation of 700 ppm S2O32− influent to an effluent of < 100 ppm total thio-salts can be carried out continuously for at least one month when operating at 20 to 30°C with solution flow rates of$˜1l/h and aeration of 1300 XXX/h using a two-stage reactor system comprised of 12 l reactors. At higher thiosalt influent levels (i.e. > 1600 ppm) increased reaction temperatures enable depletion to < 100 ppm thiosalt effluent levels for up to one week of continuous operation. The catalysts deactivate much more readily at these higher influent levels as a result of greater copper losses and appreciable adsorption of S2O32− and S4O62−. The behaviour of continuous slurry reactors employed in the experimental studies, by use of batch reaction data for the poly (4-vinylpyridine) Cu (II) catalyzed oxidation of thiosalts, can be modelled successfully. Quaternized poly (4-vinylpyridine) Cu (II) catalyst has good long-term stability and copper losses are very low. The poly (4-vinylpyridine) Cu (II) catalyst, however, is susceptible to appreciable oxidation of the polymer matrix on long-term usage. This oxidation of the polymer matrix results in a substantial loss in the activity of the regenerated catalyst.

Oath of allegiance to George II by Jews in American colonies

Digital image

Salaisen evankelistan salaliitto : Uusin keskustelu Klemens Aleksandrialaisen kirjeestä Theodorokselle

This thesis is an assessment of the hoax hypothesis, mainly propagated in Stephen C. Carlson's 2005 monograph "The Gospel Hoax: Morton Smith's Invention of Secret Mark", which suggests that professor Morton Smith (1915-1991) forged Clement of Alexandria's letter to Theodore. This letter Smith claimed to have discovered as an 18th century copy in the monastery of Mar Saba in 1958. The Introduction narrates the discovery story of Morton Smith and traces the manuscript's whereabouts up to its apparent disappearance in 1990 following with a brief history of scholarship of the MS and some methodological considerations. Chapters 2 and 3 deal with the arguments for the hoax (mainly by Stephen C. Carlson) and against it (mainly Scott G. Brown). Chapter 2 looks at the MS in its physical aspects, and chapter 3 assesses its subject matter. I conclude that some of the details fit reasonably well with the hoax hypothesis, but on the whole the arguments against it are more persuasive. Especially Carlson's use of QDE-analysis (Questioned Document Examination) has many problems. Comparing the handwriting of Clement's letter to Morton Smith's handwriting I conclude that there are some "repeated differences" between them suggesting that Smith is not the writer of the disputed letter. Clement's letter to Theodore derives most likely from antiquity though the exact details of its character are not discussed in length in this thesis. In Chapter 4 I take a special look at Stephen C. Carlson's arguments which propose that Morton Smith hid clues of his identity to the MS and the materials surrounding it. Comparing these alleged clues to known pseudoscientific works I conclude that Carlson utilizes here methods normally reserved for building a conspiracy theory; thus Carlson's hoax hypothesis has serious methodological flaws in respect to these hidden clues. I construct a model of these questionable methods titled "a boisterous pseudohistorical method" that contains three parts: 1) beginning with a question that from the beginning implicitly contains the answer, 2) considering everything will do as evidence for the conspiracy theory, and 3) abandoning probability and thinking literally that everything is connected. I propose that Stephen C. Carlson utilizes these pseudoscientific methods in his unearthing of Morton Smith's "clues". Chapter 5 looks briefly at the literary genre I title "textual puzzle -thriller". Because even biblical scholarship follows the signs of the times, I propose Carlson's hoax hypothesis has its literary equivalents in fiction in titles like Dan Brown's "Da Vinci Code" and in academic works in titles like John Dart's "Decoding Mark". All of these are interested in solving textual puzzles, even though the methodological choices are not acceptable for scholarship. Thus the hoax hypothesis as a whole is alternatively either unpersuasive or plain bad science.

Fabrication and mechanisms of densification of ZrB2-based ultra high temperature ceramics by reactive hot pressing

Dense ZrB2-SiC (25-30 vol%) composites have been produced by reactive hot pressing using stoichiometric Zr, B4C, C and Si powder mixtures with and without Ni addition at 40 MPa, 1600 degrees C for 60 min. Nickel, a common additive to promote densification, is shown not to be essential; the presence of an ultra-fine microstructure containing a transient plastic ZrC phase is suggested to play a key role at low temperatures, while a transient liquid phase may be responsible at temperatures above 1350 degrees C. Hot Pressing of non-stoichiometric mixture of Zr, B4C and Si at 40 MPa, 1600 degrees C for 30 min resulted in ZrB2-ZrCx-SiC (15 vol%) composites of similar to 98% RD.

High lithium storage in micrometre sized mesoporous spherical self-assembly of anatase titania nanospheres and carbon

Composite of anatase titania (TiO2) nanospheres and carbon grown and self-assembled into micron-sized mesoporous spheres via a solvothermal synthesis route are discussed here in the context of rechargeable lithium-ion battery. The morphology and carbon content and hence the electrochemical performance are observed to be significantly influenced by the synthesis parameters. Synthesis conditions resulting in a mesoporous arrangement of an optimized amount carbon and TiO2 exhibited the best lithium battery performance. The first discharge cycle capacity of carbon-titania mesoporous spheres (solvothermal reaction at 150 degrees C at 6 h, calcination at 500 degrees C under air, BET surface area 80 m(2)g(-1)) was 334 mAhg(-1) (approximately 1 Li) at current rate of 0.066 Ag-1. High storage capacity and good cyclability is attributed to the nanostructuring of TiO2 (mesoporosity) as well as due to formation of a percolation network of carbon around the TiO2 nanoparticles. The micron-sized mesoporous spheres of carbon-titania composite nanoparticles also show good rate cyclability in the range (0.066-6.67) Ag-1.

In-situ one-step hydrothermal synthesis of a lead germanate-graphene composite as a novel anode material for lithium-ion batteries

Lead germanate-graphene nanosheets (PbGeO3-GNS) composites have been prepared by an efficient one-step, in-situ hydrothermal method and were used as anode materials for Li-ion batteries (LIBs). The PbGeO3 nanowires, around 100–200 nm in diameter, are highly encapsulated in a graphene matrix. The lithiation and de-lithiation reaction mechanisms of the PbGeO3 anode during the charge-discharge processes have been investigated by X-ray diffraction and electrochemical characterization. Compared with pure PbGeO3 anode, dramatic improvements in the electrochemical performance of the composite anodes have been obtained. In the voltage window of 0.01–1.50 V, the composite anode with 20 wt.% GNS delivers a discharge capacity of 607 mAh g−1 at 100 mA g−1 after 50 cycles. Even at a high current density of 1600 mA g−1, a capacity of 406 mAh g−1 can be achieved. Therefore, the PbGeO3-GNS composite can be considered as a potential anode material for lithium ion batteries.

Sinteractivity, proton conductivity and chemical stability of BaZr 0.7In0.3O3-δ for solid oxide fuel cells (SOFCs)

In3+ was used as dopant for BaZrO3 proton conductor and 30 at%-doped BaZrO3 samples (BaZr0.7In 0.3O3-δ, BZI) were prepared as electrolyte materials for proton-conducting solid oxide fuel cells (SOFCs). The BZI material showed a much improved sinteractivity compared with the conventional Y-doped BaZrO 3. The BZI pellets reached almost full density after sintering at 1600 °C for 10 h, whereas the Y-doped BaZrO3 samples still remained porous under the same sintering conditions. The conductivity measurements indicated that BZI pellets showed smaller bulk but improved grain boundary proton conductivity, when compared with Y-doped BaZrO3 samples. A total proton conductivity of 1.7 × 10-3 S cm -1 was obtained for the BZI sample at 700 °C in wet 10% H 2 atmosphere. The BZI electrolyte material also showed adequate chemical stability against CO2 and H2O, which is promising for application in fuel cells.