Isentropic Exergy and Pressure of the Shock Wave Caused by the Explosion of a Pressure Vessel

An accidental burst of a pressure vessel is an uncontrollable and explosion-like batch process. In this study it is called an explosion. The destructive effectof a pressure vessel explosion is relative to the amount of energy released in it. However, in the field of pressure vessel safety, a mutual understanding concerning the definition of explosion energy has not yet been achieved. In this study the definition of isentropic exergy is presented. Isentropic exergy is the greatest possible destructive energy which can be obtained from a pressure vessel explosion when its state changes in an isentropic way from the initial to the final state. Finally, after the change process, the gas has similar pressure and flow velocity as the environment. Isentropic exergy differs from common exergy inthat the process is assumed to be isentropic and the final gas temperature usually differs from the ambient temperature. The explosion process is so fast that there is no time for the significant heat exchange needed for the common exergy.Therefore an explosion is better characterized by isentropic exergy. Isentropicexergy is a characteristic of a pressure vessel and it is simple to calculate. Isentropic exergy can be defined also for any thermodynamic system, such as the shock wave system developing around an exploding pressure vessel. At the beginning of the explosion process the shock wave system has the same isentropic exergyas the pressure vessel. When the system expands to the environment, its isentropic exergy decreases because of the increase of entropy in the shock wave. The shock wave system contains the pressure vessel gas and a growing amount of ambient gas. The destructive effect of the shock wave on the ambient structures decreases when its distance from the starting point increases. This arises firstly from the fact that the shock wave system is distributed to a larger space. Secondly, the increase of entropy in the shock waves reduces the amount of isentropic exergy. Equations concerning the change of isentropic exergy in shock waves are derived. By means of isentropic exergy and the known flow theories, equations illustrating the pressure of the shock wave as a function of distance are derived. Amethod is proposed as an application of the equations. The method is applicablefor all shapes of pressure vessels in general use, such as spheres, cylinders and tubes. The results of this method are compared to measurements made by various researchers and to accident reports on pressure vessel explosions. The test measurements are found to be analogous with the proposed method and the findings in the accident reports are not controversial to it.

Effect of Noncondensable Gases on Circulation of Primary Coolant in Nuclear Power Plants in Abnormal Situations

The present study focuses on two effects of the presence of a noncondensable gas on the thermal-hydraulic behavior of thecoolant of the primary circuit of a nuclear reactor in the VVER-440 geometry inabnormal situations. First, steam condensation with the presence of air was studied in the horizontal tubes of the steam generator (SG) of the PACTEL test facility. The French thermal-hydraulic CATHARE code was used to study the heat transfer between the primary and secondary side in conditions derived from preliminary experiments performed by VTT using PACTEL. In natural circulation and single-phase vapor conditions, the injection of a volume of air, equivalent to the totalvolume of the primary side of the SG at the entrance of the hot collector, did not stop the heat transfer from the primary to the secondary side. The calculated results indicate that air is located in the second half-length (from the mid-length of the tubes to the cold collector) in all the tubes of the steam generator The hot collector remained full of steam during the transient. Secondly, the potential release of the nitrogen gas dissolved in the water of the accumulators of the emergency core coolant system of the Loviisa nuclear power plant (NPP) was investigated. The author implemented a model of the dissolution and release ofnitrogen gas in the CATHARE code; the model created by the CATHARE developers. In collaboration with VTT, an analytical experiment was performed with some components of PACTEL to determine, in particular, the value of the release time constant of the nitrogen gas in the depressurization conditions representative of the small and intermediate break transients postulated for the Loviisa NPP. Such transients, with simplified operating procedures, were calculated using the modified CATHARE code for various values of the release time constant used in the dissolution and release model. For the small breaks, nitrogen gas is trapped in thecollectors of the SGs in rather large proportions. There, the levels oscillate until the actuation of the low-pressure injection pumps (LPIS) that refill the primary circuit. In the case of the intermediate breaks, most of the nitrogen gas is expelled at the break and almost no nitrogen gas is trapped in the SGs. In comparison with the cases calculated without taking into account the release of nitrogen gas, the start of the LPIS is delayed by between 1 and 1.75 h. Applicability of the obtained results to the real safety conditions must take into accountthe real operating procedures used in the nuclear power plant.

Ash Particle Erosion on Steam Boiler Convective Section

In this study, equations for the calculation of erosion wear caused by ash particles on convective heat exchanger tubes of steam boilers are presented. Anew, three-dimensional test arrangement was used in the testing of the erosion wear of convective heat exchanger tubes of steam boilers. When using the sleeve-method, three different tube materials and three tube constructions could be tested. New results were obtained from the analyses. The main mechanisms of erosionwear phenomena and erosion wear as a function of collision conditions and material properties have been studied. Properties of fossil fuels have also been presented. When burning solid fuels, such as pulverized coal and peat in steam boilers, most of the ash is entrained by the flue gas in the furnace. In bubbling andcirculating fluidized bed boilers, particle concentration in the flue gas is high because of bed material entrained in the flue gas. Hard particles, such as sharp edged quartz crystals, cause erosion wear when colliding on convective heat exchanger tubes and on the rear wall of the steam boiler. The most important ways to reduce erosion wear in steam boilers is to keep the velocity of the flue gas moderate and prevent channelling of the ash flow in a certain part of the cross section of the flue gas channel, especially near the back wall. One can do this by constructing the boiler with the following components. Screen plates can beused to make the velocity and ash flow distributions more even at the cross-section of the channel. Shield plates and plate type constructions in superheaters can also be used. Erosion testing was conducted with three types of tube constructions: a one tube row, an inline tube bank with six tube rows, and a staggered tube bank with six tube rows. Three flow velocities and two particle concentrations were used in the tests, which were carried out at room temperature. Three particle materials were used: quartz, coal ash and peat ash particles. Mass loss, diameter loss and wall thickness loss measurements of the test sleeves were taken. Erosion wear as a function of flow conditions, tube material and tube construction was analyzed by single-variable linear regression analysis. In developing the erosion wear calculation equations, multi-variable linear regression analysis was used. In the staggered tube bank, erosion wear had a maximum value in a tube row 2 and a local maximum in row 5. In rows 3, 4 and 6, the erosion rate was low. On the other hand, in the in-line tube bank the minimum erosion rate occurred in tube row 2 and in further rows the erosion had an increasing value, so that in a six row tube bank, the maximum value occurred in row 6.

Morphological and functional variability in the root system of Quercus ilex L. subject to confinement: consequences for afforestation

We examined root morphological and functional differences caused by restrictions imposed to vertical growth in the root system of holm oak (Quercus ilex L.) seedlings to assess the consequences of using nursery containers in the development of a confined root system for this species. Thus, root morphological, topological and functional parameters, including hydraulic conductance per leaf unit surface area (K $_{\rm RL})$, were investigated in one-year seedlings cultivated in three PVC tubes differing in length (20, 60 and 100 cm). Longer tubes showed greater projected root area, root volume, total and fine root lengths, specific root length (SRL) and K$_{\rm RL}$ values than did shorter tubes. On the other hand, the length of coarse roots (diameter > 4.5 mm) and the average root diameter were greater in shorter tubes. The strong positive correlation found between K$_{\rm RL}$ and SRL (r=+0.69; P<0.001) indicated that root thickness was inversely related to water flow through the root system. We concluded that root systems developed in longer tubes are more efficient for plant water uptake and, therefore, changes in root pattern produced in standard forest containers (i.e. about 20 cm length) may in fact prevent a proper establishment of the holm oak in the field, particularly in xeric environments.

Parasitoides de Cacopsylla pyri (L.) (= Psylla pyri (L.)) presentes en una plantación comercial de peral en Lleida no sometida a tratamientos insecticidas

Se ha seguido la evolución de las poblaciones de parasitoides de Cacopsylla pyri (L.) (= Psylla pyri (L.)) en una parcela comercial de peral de la variedad Blanquilla no sometida a tratamientos con productos insecticidas en Lleida. Se recogieron al azar semanalmente unas 150 ninfas de C. pyri desde abril a noviembre de 1991. Las ninfas fueron llevadas al laboratorio y colocadas en brotes de peral. Las momias fueron individualizadas en tubos de cristal hasta la emergencia del adulto del parasitoide. La especie parasitoide más abundante fue el encírtido Trechnites psyllae (Ruschka) (= Metallon psyllae (Ruschka)). También se encontró un encírtido hiperparasitoide, Aphidencyrtus mamitus (Walker) (= Syrphophagus mamitus Walker). Se observó un 18 % de parasitismo en la primera quincena de mayo sobre ninfas de la primera generación de C. pyri, época del año en la que no han hecho su aparición los depredadores de psylla.

Titanyylisulfaatin elektrolyyttisen pelkistyslaitoksen esisuunnitelma

Työssä esisuunniteltiin Kemira Pigments Oy:lle uusi titanyylisulfaatin elektrolyyttinen pelkistyslaitos. Suurin syy uuden laitoksen suunnitteluun oli nykyisen laitoksen aiheuttamat korkeat H2SO4-pitoisuudet pelkistyslaitoksen läheisyydessä. Työn kirjallisuusosassa käsitellään elektrolyysilaitteiston suunnitteluun liittyviä seikkoja ja esitellään titanyylisulfaatin elektrolyyttiseen pelkistykseen liittyvää tutkimustietoa. Ennen uuden laitoksen suunnittelua suoritettiin nykyisellä pelkistyslaitoksella koeajoja, joiden tarkoituksena oli antaa lähtötiedot uuden laitoksen suunnittelulle. Koeajot osoittivat mm., että pelkistys on edullisinta suorittaa alhaisella virrantiheydellä n. 300…400 A/m2 ja vesilaimennuksen avulla anolyytin H2SO4-pitoisuus saadaan säädettyä tasolle, jossa titaani ei saostu. Kärynpoistoyhteisiin asennettujen pesuvesisuuttimien avulla saatiin titaanin saostuminen kärynpoistokanaviin estettyä. Uudesta titanyylisulfaatin elektrolyyttisestä pelkistyslaitoksesta laadittiin mm. seuraavat dokumentit: prosessin virtauskaavio ja ainevirtakenttä, PI-kaavio, layout-kuvat laitoksesta ja sen sijoituksesta sekä rakennepiirros elektrolyysialtaasta. Hankkeelle tehtiin kustannusarvio tarkkuudella ±20 %, jonka loppusummaksi saatiin 1 489 000 €. Laitoksen vuotuisten käyttökustannuksien arvioitiin olevan n. 105 000 €. Investoinnista aiheutuvien vuotuisten annuiteettikustannusten arvioitiin olevan n. 237 000 € 16,3 % korolla.

Kerrostumien muodostumisen määritys sondin lämmönsiirron perusteella

Diplomityön tavoitteena oli tutkia kerrostumien muodostumista voimalaitoskattiloiden lämpöpinnoille ja niiden vaikutusta lämmönsiirtoon. Kerrostumien vaikutusta lämpöpintojen lämpötiloihin tutkittiin kerrostumasondin avulla kierto- ja kerrosleijukattiloissa. Saadun mittausaineiston muodostettiin mittaustilannetta vastaava laskentamalli, jonka avulla pystytään selvittämään voimalaitoksen lämpöpintojen likaantumista käyttöperiodin aikana. Työn alussa tarkasteltiin kerrostumien muodostumismekanismeja lämmönsiirtopinnoille, kerrostumien ominaisuuksia ja virtausympäristön vaikutusta lämmönsiirtoon. Poltossa syntyvä tuhka kiinnittyy eri mekanismeilla kattilan seinille ja lämpöpinnoille riippuen polttoaineesta ja ympäröivistä olosuhteista. Likakerrosten muodostuminen lämmönsiirtimen pinnalle pienentää putkeen siirtyvää lämpövirtaa ja alentaa kattilan hyötysuhdetta. Kerrostumien lämmönjohtumisesta ja mikrorakenteesta on hyvin vähän kokeellisen tietoa, mikä vaikeuttaa reaalisten mallien muodostamista kattilan käyttäytymisestä sen likaantuessa.Työn kokeellisessa osassa tarkasteltiin kahdella eri kattilalla tehtyjä mittauksia. Mittaukset tehtiin kerrostumasondilla, jonka lämmönsiirrosta luotiin laskentamalli SIMULINK-simulointiohjelmalla. Mittaustuloksina saatiin kolmen eri pinnan lämpötilat, jotka muuttuivat kerrostuman ja jäähdytyksen vaikutuksesta. Laskentamallista muokattiin mittaustilanteita vastaava, jolloin lämpötilamuutoksista nähdään likakerroksen ominaisuuksien vaikutus lämmönsiirtoon. Sondista muodostettiin myös FLUENT-malli, jolla tarkasteltiin yksittäisen putken virtauskenttää sekä kahden lähekkäin olevan putken vaikutusta virtaukseen.

Kuormituksen vaikutus kromatografiseen erotukseen alikriittisellä vedellä

Teollisessa kromatografiassa kolonnia pyritään kuormittamaan mahdollisimman paljon, jotta saataisiin maksimoitua erotetun komponentin määrä aikayksikköä kohden. Tässä työssä kuormitusta tutkittiin nostamalla syöttöliuoksen, synteettisen melassin, näyteväkevyyttä 80-125 ºC:ssa. Eluenttina oli paineistettu kuumaa vesi ja hartsina vahva Na-muotoinen PS-DVB pohjainen vahva kationinvaihtohartsi. Lämpötilaa nostamalla piikit kapenivat ja tulivat symmetrisemmiksi, erotus nopeutui sekä suola erottui usein paremmin sokereista. Syöttöliuoksen kuiva-ainetta lisättiin asteittain 55 p-% saakka, jolloin ei vielä havaittu ongelmia erotuksessa. Lämpötilassa 125 ºC havaittiin erotuksen aikana kuormituksesta riippumatonta sakkaroosin invertoitumista. Vertailtaessa eri stationäärifaaseja havaittiin Na-muotoisen PS-DVB pohjaisen kationinvaihtohartsin erottavan yleensä sokereita, sokerialkoholeja, oligosakkarideja ja betaiinia lähes poikkeuksetta paremmin alhaisilla pitoisuuksilla kuin neutraalihartsi ja Na-muotoinen zeoliitti. Erottuminen ei yleensä parantunut lämpötilaa nostamalla, mutta piikit kapenivat ja erotus nopeutui. Monosakkaridien erotus huononi 125 ºC:ssa kationinvaihtohartsilla. Tutkittaessa terveysvaikutteisten ksylo-oligosakkaridien soveltuvuutta alikriittiseen erotukseen, niiden havaittiin huomattavasti hydrolysoituvan happamissa olosuhteissa koeputkessa 100 ºC:ssa kahdessa tunnissa. Näytteessä olevien epäpuhtauksien havaittiin katalysoineen hydrolyysiä. Hydrolysoituminen oli hitaampaa neutraaleissa olosuhteissa korotetussa lämpötilassa. Tästä voitiin tehdä johtopäätös, että alikriittiset olosuhteet eivät sovi ksylo-oligosakkaridien erotukseen.

Sublethal effect of neem extract on mediterranean fruit fly adults

The sublethal effect of extracts of Azadirachta indica on Ceratitis capitata was evaluated. Two pairs of flies were treated in plastic tubes with cotton placed in plastic cages. An artificial diet (hydrolyzed protein + sugar) was provided ad libitum. The extracts affected significantly the longevity of C. capitata. The pre-oviposition period were not significantly affected by the extracts. The A. indica branches extracted with dichloromethane (888 ppm) affected significantly the fecundity and fertility, reducing the number of eggs laid to approximately 80 % and the egg hatching by 30 % at the 8th day. Therefore, the neem branches extracted with dichloromethane affected the reproduction of C. capitata.

Papaya seedlings growth using a low-cost, automatic watering controller

The study assessed growth and physiological parameters of 'Sunrise Golden' and 'Tainung 01' papaya seedlings grown in 280mL plastic tubes and watered using a low-cost automatic irrigation system adjusted to operate at substrate water tension for starting irrigation (STI) of 3.0, 6.0 or 9.0 kPa. The water depths applied by the dripping system and drainage were monitored during germination and seedling growth. Germination, emergence velocity index (EVI), leaf area, plant height, shoot and root dry weight, stomatal conductance, relative water content (RWC) and relative chlorophyll content (RCC) were evaluated. Soil nutrient levels were determined by electrical conductivity (EC). Water use efficiency (WUE) corresponded to the ratio of plant dry mass to depth of water applied. STI settings did not affect papaya germination or EVI. System configuration to 3.0 and 6.0 kPa STI exhibited the highest drainage and lowest EC and RCC, indicating soil nutrient loss and plant nutrient deficiency. Drainage was greater in tubes planted with the 'Tainung 01' variety, which developed smaller root systems and lower stomatal conductance than 'Sunrise Golden' seedlings. The highest values for shoot dry weight and WEU were obtained at 6.0 kPa STI for 'Sunrise Golden' (0.62 g and 0.69 g L-1) and at 9.0 kPa in 'Tainung 01' (0.35 g and 0.82 g L-1). RWC at 9.0 kPa STI was lower than at 3.0 kPa in both varieties. The results indicate that the low-cost technology developed for irrigation automation is promising. Even so, new studies are needed to evaluate low-flow irrigation systems as well as the nutrient and water needs of different papaya varieties.

Prosessihyötysuhteen parantamiskohteiden kartoitus painevesireaktorityyppisessä ydinvoimalaitoksessa

Työn tavoitteena on kartoittaa painevesireaktorityyppisen ydinvoimalaitoksen prosessihyötysuhteen parantamiskohteita. Aluksi kirjallisuudesta etsitään hyötysuhteen parantamiskeinoja ideaalisessa höyryvoimalaitosprosessissa. Näistä valitaan sopivimmat tarkastelun kohteeksi todellisessa voimalaitoksessa: syöttöveden esilämmityksen tehostaminen väliottohöyryvirtausta kasvattamalla ja syöttöveden esilämmittimen lämmönsiirtopintaa lisäämällä. Tarkastelussa pyritään löytämään paras mahdollinen hyötysuhde väliottohöyrylinjojen putkikokoa sekä esilämmittimien putkien lukumäärää muuttamalla. Diskreetin optimoinnin iteraatioaskel määritetään hyötysuhteen osittaisderivaattojen avulla. Tehtäviä muutoksia simuloidaan APROS-simulointiohjelmalla, jossa käytetään Loviisan voimalaitoksesta tehtyä mallia VVER-440. Työssä havaittiin, että pelkkiä väliottohöyrylinjojen putkikokoja – ja massavirtaa – kasvattamalla Loviisan voimalaitoksen hyötysuhdetta voidaan parantaa parhaimmillaan 32,75%:sta 32,85%:iin. Syöttöveden esilämmittimien lämmönsiirtopintaa lisäämällä saadaan suurempi parannus hyötysuhteeseen: 32,75%:sta 32,99%:iin. Näissä tapauksissa muutettiin kaikkia väliottohöyrylinjoja tai syöttöveden esilämmittimien lämpöpintoja. Työssä tarkasteltiin myös joitakin pienempiä muutoskohteita, joista paras hyötysuhteen kasvu saatiin korkeapaine-esilämmittimien lämmönsiirtopintaa kasvattamalla sekä toisen väliottohöyrylinjan (RD12) ja sitä vastaavan syöttöveden esilämmittimen muutosten yhteisvaikutuksena.

Neuropathogenesis in glutaric aciduria type I and methylmalonic aciduria

Glutaric aciduria type-I (GA-I) and methylmalonic aciduria (MMA-uria) are two neurometabolic diseases manifesting in neonatal period and early childhood. They belong to the group of organic acidurias and are caused by defects in the catabolism of amino acids, leading to massive accumulation of toxic metabolites in the body and severe brain injury. Therapeutic strategies are mainly based on reversing catabolic state during metabolic crisis and dietary protein restriction that both aim to prevent extra production of toxic metabolites. Specific and neuroprotective treatments are missing because the mechanisms of brain damage in these diseases are only poorly understood. The principal objective of my work was to develop in vitro models for both diseases aiming at elucidation of toxic effects of the main metabolites accumulating in GA-I (glutaric acid (GA) and 3-hydroxy glutaric acid (3-OHGA)) and MMA-uria (methylmalonic acid (MMA), propionic acid (PA) and 2-methylcitric acid (2-MCA)) on developing brain cells, and to study the cellular pathways targeted by these deleterious effects in order to find new therapeutic potentials. We used re-aggregated embryonic rat brain cells in organotypic 3D cultures, which were exposed to toxic metabolites at different developing stages of the cultures. In parallel, we studied the cellular localization of the defected enzyme in GA-I, glutaryl-CoA dehydrogenase (GCDH), in the brain and peripheral tissues of rats in adulthood and during embryonic development. GCDH expression: GCDH showed a strong neuronal expression in embryonic central and peripheral nervous system. In the adult brain, GCDH expression was exclusively neuronal with the strongest signal in cerebral cortex and Purkinje cells. GCDH expression was homogenous in embryonic peripheral organs with high levels in intestinal mucosa at late stages. Strong GCDH expression was also observed in liver and intestinal mucosa and with lower intensity in muscles, convoluted renal tubules and renal collecting tubes in adult peripheral organs. GA-I and MMA-uria in vitro models: 3-OHGA (for GA-I) and 2-MCA (for MMA-uria) showed the most deleterious effects at early stages of the cultures with morphological and biochemical alterations and induction of cell death. 3-OHGA and 2-MCA caused astrocytic cell suffering reflected by astrocytic fiber loss and swelling and retardation in oligodendrocytic maturation and/or differentiation. High ammonium increase concomitant with glutamine decrease was observed in these cultures. Neurons were not substantially affected. Our studies revealed that brain-cell generated ammonia may play a role in the neuropathogenesis of these diseases. Thus, developing neuroprotective strategies that target ammonium toxicity in the brain of GA-I and MMA-uria patients might be important according to our findings. -- L'acidurie glutarique de type I (GA-I) et l'acidurie méthylmalonique (MMA-urie) sont deux maladies neurométaboliques se manifestant durant la période néonatale ou la petite enfance, et qui appartiennent aux aciduries organiques. Elles sont causées par des défauts dans le catabolisme des acides aminés, conduisant à une accumulation des métabolites toxiques dans le corps et aussi des lésions cérébrales sévères. Le traitement est limité à une prise en charge d'urgence pendant la crise métabolique et à une diète restreinte en protéines naturelles. Des traitements spécifiques, neuroprotecteurs manquent principalement parce que les mécanismes conduisant aux lésions cérébrales dans ces maladies sont peu connus. L'objectif principal de mon travail était d'élucider les effets toxiques des métabolites accumulés dans GA-I (l'acide glutarique (GA) et l'acide 3-hydroxyglutarique (3-OHGA)) et MMA-uria (l'acide méthylmalonique (MMA), l'acide propionique (PA) et l'acide 2-méthylcitrique(2-MCA) sur les cellules du cerveau ainsi que les voies cellulaires impliquées, dans le but de trouver de potentielles nouvelles stratégies thérapeutiques. Nous avons utilisé un modèle in vitro de cultures 3D de cellules de cerveau d'embryons de rat (en développement) en les exposant aux métabolites toxiques à différents stades de développement des cultures. En parallèle, nous avons étudié la localisation cellulaire de l'enzyme déficiente dans GA-I, la CoA-glutarly déshydrogénase (GCDH), dans le cerveau et les organes périphériques des rats adultes et pendant le développement embryonnaire. L'expression de GCDH: GCDH a montré une expression neuronale forte dans le système nerveux chez l'embryon et le cerveau adulte. L'expression était homogène dans les organes périphériques avec une forte expression dans l'intestin. Les modèles in vitro de GA-I et MMA-uria : 3-OHGA en modèle GA-I et 2-MCA en modèle MMA-uria ont montré les effets délétères les plus importants avec des altérations morphologiques des cellules et biochimiques dans le milieu de culture et l'induction de mort cellulaire non-apoptotique (3-OHGA) ou apoptotique (2-MCA). 3-OHGA et 2-MCA ont provoqué une souffrance astrocytaire avec perte des fibres et gonflement et un retard de maturation et/ou de différentiation des oligodendrocytes. Une augmentation importante d'ammonium avec une diminution concomitante de glutamine a été observée dans les cultures. Les neurones n'étaient pas vraiment affectés. Nos études ont révélé que l'ammonium généré par les cellules cérébrales pourrait jouer un rôle dans la neuropathogenèse de ces deux maladies. Par conséquent, développer des stratégies neuroprotectrices ciblant la toxicité de l'ammonium dans le cerveau des patients atteints de GA-I ou MMA-urie pourrait être très important selon nos résultats.

Hydrodynamics and Heat Transfer in an Airlift Reactor

Työn teoriaosassa esitetään kirjallisuudessa esiintyviä teoreettisia ja kokeellisia yhtälöitä nesteen nopeuden, kaasun tilavuusosuuden, painehäviön ja lämmönsiirron laskemiseksi. Lisäksi käsitellään airlift-reaktoreiden toimintaa, rakennetta ja teollisia sovelluksia, sekä sekoitusta ja geometrian vaikutusta airlift-reaktoreiden hydrodynaamisiin ominaisuuksiin. Kokeellisessa osassa kuvataan käytetty koelaitteisto ja mittausmenetelmät sekä esitetään saadut koetulokset. Koelaitteisto on viidellä nousuputkella varustettu ulkoisen kierron airlift-reaktori. Kokeellisessa osassa pyritään ratkaisemaan tällaisessa reaktorissa mahdollisesti esiintyviä ongelmia, kuten "slug flown" muodostuminen nousuputkissa sekä fluidien epätasainen jakautuminen nousuputkiin. Lisäksi tutkitaan erilaisten muuttujien, kuten kaasun tilavuusvirran, nesteen viskositeetin, suutinkoon ja nesteen jakoputken rakenteen, vaikutusta kaasun tilavuusosuuteen ja nesteen nopeuteen nousuputkissa. Nesteen nopeudet mitataan merkkiainemenetelmällä ja kaasun tilavuusosuudet manometrimenetelmällä. Lämmönsiirtoa tutkitaan mittaamalla lämpötilaeroja nousuputkissa NiCr-Ni –termoelementeillä. Mittaustulosten perusteella muokataan korrelaatiot kaasun tilavuusosuudelle ja nesteen tyhjäputkinopeudelle. Korrelaatioista lasketut tulokset sopivat kohtuullisen hyvin yhteen mitattujen tulosten kanssa. "Slug flown" ei todettu muodostuvan ongelmaksi 2.5 mPa s pienemmillä viskositeetin arvoilla 2 metriä pitkissä ja 19 mm halkaisijaltaan olevissa putkissa. Lisäksi todettiin, että kaasu- ja nestefaasien jakautumisongelmat voidaan ratkaista rakenteellisesti.

The Optimisation of the Draft Tube of a Hydro Power Plant at Off-Design Conditions

Several possible methods of increasing the efficiency and power of hydro power plants by improving the flow passages are investigated in this stydy. The theoretical background of diffuser design and its application to the optimisation of hydraulic turbine draft tubes is presented in the first part of this study. Several draft tube modernisation projects that have been carried out recently are discussed. Also, a method of increasing the efficiency of the draft tube by injecting a high velocity jet into the boundary layer is presented. Methods of increasing the head of a hydro power plant by using an ejector or a jet pump are discussed in the second part of this work. The theoretical principles of various ejector and jet pump types are presented and four different methods of calculating them are examined in more detail. A self-made computer code is used to calculate the gain in the head for two example power plants. Suitable ejector installations for the example plants are also discussed. The efficiency of the ejector power was found to be in the range 6 - 15 % for conventional head increasers, and 30 % for the jet pump at its optimum operating point. In practice, it is impossible to install an optimised jet pump with a 30 % efficiency into the draft tube as this would considerabely reduce the efficiency of the draft tube at normal operating conditions. This demonstrates, however, the potential for improvement which lies in conventional head increaser technology. This study is based on previous publications and on published test results. No actual laboratory measurements were made for this study. Certain aspects of modelling the flow in the draft tube using computational fluid dynamics are discussed in the final part of this work. The draft tube inlet velocity field is a vital boundary condition for such a calculation. Several previously measured velocity fields that have successfully been utilised in such flow calculations are presented herein.

Self-expandable metal stents in the treatment of acute esophageal variceal bleeding.

Acute variceal bleeding (AVB) is a life-threatening complication in patients with cirrhosis. Hemostatic therapy of AVB includes early administration of vasoactive drugs that should be combined with endoscopic therapy, preferably banding ligation. However, failure to control bleeding or early rebleed within 5 days still occurs in 15-20% of patients with AVB. In these cases, a second endoscopic therapy may be attempted (mild bleeding in a hemodynamically stable patient) or we can use a balloon tamponade as a bridge to definitive derivative treatment (i.e., a transjugular intrahepatic portosystemic shunt). Esophageal balloon tamponade provides initial control in up to 80% of AVB, but it carries a high risk of major complications, especially in cases of long duration of tamponade (>24 h) and when tubes are inserted by inexperienced staff. Preliminary reports suggest that self-expandable covered esophageal metallic stents effectively control refractory AVB (i.e., ongoing bleeding despite pharmacological and endoscopic therapy or massive bleeding precluding endoscopic therapy) with a low incidence of complications. Thus, covered self-expanding metal stents may represent an alternative to the Sengstaken-Blakemore balloon for the temporary control of bleeding in treatment failures. Further studies are required to determine the role of this new device in AVB.