Optimization of low-cost nutritional supplementation for lignocellulosic ethanol fermentation

[Excerpt] Bioethanol from lignocellulosic materials (LCM), also called second generation bioethanol, is considered a promising alternative to first generation bioethanol. An efficient production process of lignocellulosic bioethanol involves an effective pretreatment of LCM to improve the accessibility of cellulose and thus enhance the enzymatic saccharification. One interesting approach is to use the whole slurry from treatment, since allows economical and industrial benefits: washing steps are avoided, water consumption is lower and the sugars from liquid phase can be used, increasing ethanol concentration [1]. However, during the pretreatment step some compounds (such as furans, phenolic compounds and weak acids) are produced. These compounds have an inhibitory effect on the microorganisms used for hydrolysate fermentation [2]. To overcome this, the use of a robust industrial strain together with agro-industrial by-products as nutritional supplementation was proposed to increase the ethanol productivities and yields. (...)

Why do we need randomized and epidemiological studies on cardiovascular disease? Evidence-based cardiology VII

Over the last two decades the results of randomized clinical studies, which are powerful aids for correctly assessing therapeutical strategies, have consolidated cardiological practice. In addition, scientifically interesting hypotheses have been generated through the results of epidemiological studies. Properly conducted randomized studies without systematic errors and with statistical power adequate for demonstrating moderate and reasonable benefits in relevant clinical outcomes have provided reliable and strong results altering clinical practice, thus providing adequate treatment for patients with cardiovascular disease (CVD). The dissemination and use of evidence-based medicine in treating coronary artery disease (CAD), heart failure (HF), and in prevention will prevent hundreds of thousands of deaths annually in developed and developing countries. CVD is responsible for approximately 12 million deaths annually throughout the world, and approximately 60% of these deaths occur in developing countries. During recent years, an increase in mortality and morbidity rates due to CVD has occurred in developing countries. This increase is an indication that an epidemiological (demographic, economical, and health-related) transition is taking place in developing countries and this transition implies a global epidemic of CVD, which will require wide-ranging and globally effective strategies for prevention. The identification of conventional and emerging risk factors for CVD, as well as their management in high-risk individuals, has contributed to the decrease in the mortality rate due to CVD. Through a national collaboration, several multi-center and multinational randomized and epidemiological studies have been carried out throughout Brazil, thus contributing not only to a generalized scientific growth in different Brazilian hospitals but also to the consolidation of an increasingly evidence-based clinical practice.

Acabamentos químicos em tecidos

Dissertação de mestrado em Técnicas de Caracterização e Análise Química

Prospecção de ocorrências filonianas do tipo LCT nas formações metassedimentares entre Boticas e Montalegre (N de Portugal)

Dissertação de mestrado em Geologia (área de especialização em Valorização de Recursos Geológicos)

Mobilidade social, identidade e valores: o regresso de emigrantes no Minho

Dissertação de mestrado em Sociologia (área de especialização em Políticas Comunitárias e Cooperação Territorial)

Mejoramiento del comportamiento térmico de sistemas de calentamiento de agua solares termosifónicos hechos con materiales no convencionales y con tanques de almacenamiento verticales y horizontales Performance improvement of solar thermosyphonic systems for water heating made of non conventional materials and using horizontal and vertical storage tanks

El objeto de estudio de este proyecto son los sistemas de calentamiento de agua mediante energía solar que funcionan termosifónicamente. En particular se tratará con dos diseños particulares generados por fabricantes de la Provincia de Córdoba y que han solicitado el asesoramiento del Grupo de Energía Solar (GES) para el mejoramiento de la performance térmica de dichos equipos. Se trata de dos sistemas que tienen materiales no tradicionales y se diferencian además por tener una distinta disposición del tanque de almacenamiento: uno es en forma vertical y el otro en forma horizontal. Basados en los resultados de un ensayo bajo norma internacional, donde se detectaron algunas puntos factibles de mejora, se propone en este proyecto el análisis en detalle de los equipos, para lo cual se les debe desarmar completos, para realizar un estudio analítico y experimental de los mismos con el objeto de hacer un planteo teórico-analítico del comportamiento de los mismos, con la implementación de propuestas de mejora y chequeo de los resultados. Se propone entonces como objetivo lograr un mejoramiento de la performance térmica de los citados equipos a partir de un estudio experimental y analítico. Asumiendo esta posibilidad de mejora, se plantea la hipótesis de que es posible representar el funcionamiento de estos equipos mediante modelos físico-matemáticos desarrollados a partir de ecuaciones y correlaciones conocidas y procesos a interpretar mediante resoluciones numéricas y softwares específicos de simulación. De esta manera, se plantea el despieze completo de los equipos para estudiar en detalle su estructura y conexiones internas y a partir de la geometría, dimensiones y propiedades termofísicas de materiales constructivos y fluidos de trabajo, realizar modelos físico-matemáticos que permitan realizar variaciones de propiedades y geometría y así buscar las mejores combinaciones que produzcan equipos más eficientes térmicamente. Los modelos físico-matemáticos serán codificados en lenguajes de alto nivel para poder luego de una validación de los modelos, correr simulaciones en un software de reconocimiento internacional que permite sumar dichos modelos mediante un protocolo de comunicación, haciendo que las poderosas prestaciones del software se puedan aplicar a nuestros modelos. Se complementará el estudio con un análisis exergético para identificar los puntos críticos en que se producen las pérdidas de oportunidad de aprovechar la energía disponible, para así analizar cómo solucionar los problemas en dichos puntos. Los materiales a utilizar serán los propios equipos provistos por los fabricantes, que serán modificados convenientemente para operarlos como prototipos Se espera obtener un conocimiento acabado de los procesos y principios de funcionamiento de los equipos, que permita plantear las mejoras, las cuales se implementarán en los prototipos, realizándose una medición mediante norma igual a la inicial para ver en que magnitud se logran las mejoras esperadas. Se pretende además que las mejoras a implementar, en la etapa de transferencia a las empresas involucradas, redunden no sólo en un beneficio técnico, sino que también los sea desde el punto de vista económico. Para ello se trabajará también sobre los procesos y métodos de fabricación para que los equipos mejorados no sean mas caros que los originales y de ser posible sean aún más económicos, todo esto apuntando a la difusión de la energía solar térmica y poner al alcance de todos estos equipos tan convenientes para la propagación de las energías limpias. El proyecto redundará también en un importante beneficio para el conocimiento de la comunidad científica en general, con el aporte de nuevos resultados en diseños novedosos y con nuevos materiales. Además, la institución se beneficiará con la formación que obtendrán los integrantes del proyecto, muchos de ellos en etapa de realización de sus estudios de posgrado y en una etapa importante de su vida como investigadores. The main goal of this project is the improvement of two thermosyphonic solar water heating systems, made of non conventional materials and with different arrangement of their storage tanks: one is vertical and the other one horizontal. The thermosyphonic systems are provided by manufacturers of the Córdoba Province, who came to the Solar Energy Group (GES) of the National University of Río Cuarto looking for help for the design of their products. In an agreement with these manufacturers, it was proposed this project in order to work analytically and experimentally in order to obtain physical-mathematical models of these two systems, which allow for changes to look by means of simulations the best changes to implement on the equipments for the improvement of their thermal performance. Then, the materials to be used are the proper systems provided by the manufacturers, which will be disarmed to be studied in detail. After the analytical study the proposals of improvement will be implemented in a high level language of programming to perform simulations in the environment of a well-known software for energy simulations (TRNSYS). After the simulations, the best modifications will be physically implemented in the prototypes to perform finally the same normalized test of the beginning and check the magnitude of the implemented improvements. The importance of this project is based on the offer of better systems the companies would make, which would benefit the deployment of the thermal solar energy. Another relevant point is to make the new equipments at the same cost of the previous ones or cheaper, in order to achieve a good deployment of the solar water heating systems; then, the manufacture processes and methods must be studied to obtain not only good technical solutions, but also economical equipments. In addition, this project will contribute to the increasing of the knowledge in the area of thermosyphonic solar systems and the training of postgraduate students.

Desarrollo de sistemas nano/micro-particulados con aplicación en la fotodegradación selectiva de contaminantes orgánicos en solución. Development of nano / micro-particles systems with application to selective photodegradation of organic pollutants in solution.

IDENTIFICACIÓN DEL PROBLEMA DE ESTUDIO. Las sustancias orgánicas solubles en agua no biodegradables tales como ciertos herbicidas, colorantes industriales y metabolitos de fármacos de uso masivo son una de las principales fuentes de contaminación en aguas subterráneas de zonas agrícolas y en efluentes industriales y domésticos. Las reacciones fotocatalizadas por irradiación UV-visible y sensitizadores orgánicos e inorgánicos son uno de los métodos más económicos y convenientes para la descomposición de contaminantes en subproductos inocuos y/o biodegradables. En muchas aplicaciones es deseable un alto grado de especificidad, efectividad y velocidad de degradación de un dado agente contaminante que se encuentra presente en una mezcla compleja de sustancias orgánicas en solución. En particular son altamente deseables sistemas nano/micro -particulados que formen suspensiones acuosas estables debido a que estas permiten una fácil aplicación y una eficaz acción descontaminante en grandes volúmenes de fluidos. HIPÓTESIS Y PLANTEO DE LOS OBJETIVOS. El objetivo general de este proyecto es desarrollar sistemas nano/micro particulados formados por polímeros de impresión molecular (PIMs) y foto-sensibilizadores (FS). Un PIMs es un polímero especialmente sintetizado para que sea capaz de reconocer específicamente un analito (molécula plantilla) determinado. La actividad de unión específica de los PIMs en conjunto con la capacidad fotocatalizadora de los sensibilizadores pueden ser usadas para lograr la fotodescomposición específica de moléculas “plantilla” (en este caso un dado contaminante) en soluciones conteniendo mezclas complejas de sustancias orgánicas. MATERIALES Y MÉTODOS A UTILIZAR. Se utilizaran técnicas de polimerización en mini-emulsión para sintetizar los sistemas nano/micro PIM-FS para buscar la degradación de ciertos compuestos de interés. Para caracterizar eficiencias, mecanismos y especificidad de foto-degradación en dichos sistemas se utilizan diversas técnicas espectroscópicas (estacionarias y resueltas en el tiempo) y de cromatografía (HPLC y GC). Así mismo, para medir directamente distribuciones de afinidades de unión y eficiencia de foto-degradación se utilizaran técnicas de fluorescencia de molécula/partícula individual. Estas determinaciones permitirán obtener resultados importantes al momento de analizar los factores que afectan la eficiencia de foto-degradación (nano/micro escala), tales como cantidad y ubicación de foto- sensibilizadores en las matrices poliméricas y eficiencia de unión de la plantilla y los productos de degradación al PIM. RESULTADOS ESPERADOS. Los estudios propuestos apuntan a un mejor entendimiento de procesos foto-iniciados en entornos nano/micro-particulados para aplicar dichos conocimientos al diseño de sistemas optimizados para la foto-destrucción selectiva de contaminantes acuosos de relevancia social; tales como herbicidas, residuos industriales, metabolitos de fármacos de uso masivo, etc. IMPORTANCIA DEL PROYECTO. Los sistemas nano/micro-particulados PIM-FS que se propone desarrollar en este proyecto se presentan como candidatos ideales para tratamientos específicos de efluentes industriales y domésticos en los cuales se desea lograr la degradación selectiva de compuestos orgánicos. Los conocimientos adquiridos serán indispensables para construir una plataforma versátil de sistemas foto-catalíticos específicos para la degradación de diversos contaminantes orgánicos de interés social. En lo referente a la formación de recursos humanos, el proyecto propuesto contribuirá en forma directa a la formación de 3 estudiantes de postgrado y 2 estudiantes de grado. En las capacidades institucionales se contribuirá al acondicionamiento del Laboratorio para Microscopía Óptica Avanzada (LMOA) en el Dpto. de Química de la UNRC y al montaje de un sistema de microscopio de fluorescencia que permitirá la aplicación de técnicas avanzadas de espectroscopia de fluorescencia de molecula individual. Water-soluble organic molecules such as certain non-biodegradable herbicides, industrial dyes and metabolites of widespread use drugs are a major source of pollution in groundwater from agricultural areas and in industrial and domestic effluents. Photo-catalytic reactions by UV-visible irradiation and organic sensitizers are one of the most economical and convenient methods for the decomposition of pollutants into harmless byproducts. In many applications it is highly desirable a high degree of specificity, effectiveness and speed of degradation of specific pollutants present in a complex mixture. In particular nano/micro-particles systems that form stable aqueous suspensions are highly desirable because they allow for easy application and effective decontamination of large volumes of fluids. Herein we propose the development of nano/micro particles composed by molecularly imprinted polymers (MIP) and photo-sensitizers (PS). The specific binding of MIP and the photo-catalytic ability of the sensitizers are used to achieve the photo-decomposition of specific "template" molecules in complex mixtures. Mini-emulsion polymerization techniques will be used to synthesize nano/micro MIP-FS systems. Spectroscopy (steady-state and time resolved) and chromatography (GC and HPLC) will be used to characterize efficiency, mechanisms and specificity of photo-degradation in these systems. In addition single molecule/particle fluorescence spectroscopy techniques will be used to directly measure distributions of binding affinities and photo-degradation efficiency in individual particles. The proposed studies point to a more detailed understanding of the factors affecting the photo-degradation efficiency in nano/micro-particles and to apply that knowledge in the design of optimized systems for photo-selective destruction of socially relevant aqueous pollutants.

Producción de factores de virulencia por fitopatógenos bacterianos de soja. Utilización de productos naturales como biocontrol. Production of virulence factors by soybean bacterial phytopathogens. The use of natural products as biocontrolers.

En Argentina el cultivo de soja ocupa el primer lugar en superficie sembrada. El 90% de la producción se obtiene en la zona central del pais. La siembra directa favorece la multiplicación y supervivencia de fitopatógenos causantes de tizón y pústula bacterianos. El tizón es producido por Pseudomonas syringae pv. glycinea observándose manchas marrones en las hojas. Produce gran variedad de toxinas: coronatina, faseolotoxina, siringomicina, tabtoxina, proteínas “nucleation ice”, entre otras, las cuales contribuyen a la clorosis y necrosis. En la infección, además, están involucrados exopolisacáridos (levano y alginato). La celulosa ha sido relacionada en la adhesión bacteriana y en la formación de biofilm. La pústula es causada por Xanthomonas axonopodis pv. glycines. Produce manchas pequeñas con una pequeña pústula de color claro. Libera enzimas como α-amilasa, proteasa, endo β-mannanasa, actividad peptolítica, que degradan componentes vegetales. Xantan, producido por X. axonopodis es uno de los componentes necesarios para la formación de biofilm. Este último es considerado un importante factor de virulencia porque proporciona una estrategia de colonización que otorga mayor resistencia a ambientes desfavorables, tolerancia a antimicrobianos, producción de metabolitos y exoenzimas, etc. Actualmente el control de bacterias fitopatógenas se realiza mediante pesticidas con alta toxicidad para los consumidores y el ambiente. Para evitar las bacteriosis en la práctica se sugiere la rotación de cultivos y utilizar semillas certificadas. Se están probando compuestos naturales derivados de plantas medicinales como pesticidas; estos se pueden dividir en varias categorías fitoquímicas. Varios estudios confirman la actividad antibacteriana, antifúngica y antiviral de estos productos. Extractos vegetales con alto contenido de flavonoides y aceite esenciales poseen una importante actividad antibacteriana. Además, algunos aceites esenciales podrían estar incidiendo en la liberación y/o producción de biofilm, exopolisacáridos y exoproteínas. La gran incidencia de las infecciones por fitopatógenos y las pérdidas económicas que estas acarrean hacen que su control presente grandes dificultades para la agricultura sustentable en soja de nuestro país. En este trabajo se propone estudiar los diferentes factores de virulencia de cepas bacterianas fitopatógenas y evaluar el rol que cumplen en el proceso de la enfermedad en cultivos de soja y desarrollar estrategias para el control de bacteriosis vegetales aplicando productos naturales aislados de plantas aromáticas. La correcta utilización de productos antimicrobianos de origen natural aplicados sobre el cultivo y/o sobre las semillas evitaría la dispersión de la enfermedad y la eliminación al medio ambiente de productos contaminantes no deseados. In Argentina, soybean cultivation occupies the first place; 90% of this cereal is produced in the central region of the country. Intensive tillage practices favour multiplication and survival of bacterial phytopathogens causing blight and pustule diseases. Pseudomonas syringae pv. glycinea produce several toxins like coronatine, faseolotoxine, siringomicine, tabtoxine and proteins of nucleation ice that contribute to the develop of chlorosis and necrosis, characteristic of bacterial blight. It also produces levan and alginate, cellulose and biofilm. Pustule disease is caused by Xanthomonas axonopodis pv glycines, which produce enzymes like α-amilase, protease, endo β-mannanase, peptolitic activity, xanthan and biofilm. Nowadays the control of phytopathogenic bacteria consists in the application of pesticides that are toxic for the environment and man. Natural products from medicinal plants are a new alternative for the treatment of phytopathogens. Researches made with phytochemical compounds (flavonoids, phenols, quinones, cummarines, essential oils, terpenes) support the antimicrobial activity of these natural products. What is more, these substances could suppress the biofilm, exoproteins and exopolisaccharides formation and release of them. The infections caused by phytopathogens provoke economical loses and its control presents big difficulties in our country. The proposal of this work is the characterization of phytopatoghenic strains, its virulence factors and the role they play in the disease process. The development of a new alternative for the control of vegetable bacteriosis using natural products obtained from aromatic plants and the correct application of them on sown fields or on seeds is also an objective in this work.

Raça de galinhas "piracicaba": II. "Pedigree" das aves puras para os caracteres pescoço pelado e plumagem preta

The pedigree of chickens homozygous for black plumage and naked and now obtained in the Poultry Department of the "Luiz de Queiroz" School of Agriculture, was traced in this paper. The animals will be used in the formation of the new local breed called "Piracicaba PPPP", (Pescoço Pelado Preta de Piracicaba), which we propose to start with selection of others morphological characters and mainly the economical ones: egg laying, early maturing and soft-meated chickens.

Estudo comparativo entre silagem de milho e cana taquara na alimentação suplementar de vacas leiteiras

The A. A. compare corn silage (Zea mays L.) with sugar cane (Saccharum sinensis Roxb.) in the supplementary feeding of dairy cow. Both the feeds were studied in relation to the following points: composition and nutritive value; influence of milk production, milk fat, milk acidity and body weight; cost of production. Both corn silage and sugar cane were analysed by ordinary methods, and their digestibility was determined by means of digestibility coefficients; their composition and nutritive value are, practically, equivalent, but silage showed slight superiority. The feeding experiment was carried out with two groups of six Holstein Friesian cows each, of the Escola Superior de Agricultura "Luiz de Queiroz" herd. Both groups were fed with the same basic concentrates mixture, calculeted according to MORRISON. During the various periods of the experiment, only the roughage supplement varied. The supplementary feeding consisted of 15 kg of chopped sugar cane or corn, silage, per day and per cow, given in two daily meals in the barn. At 4,30 p.m., the cows are set free in the field, where they pass the over night. The experiment was divided into six periods, in which there was a gradative change of the supplementary feeding between the two groups. The milk was weighed every day; the analysis of milk fat and acidity and the weighing of the animals, were made only on the first three days of every week. The analysis of data showed that: a) Milk production was increased significantly by silage feeding; b) The ri was not any influence on milk fat; c) The silage caused higher milk acidity; d) The sugar cane gave a greater increase of body weight. The cost of production of corn silage was 2,12 time higher, than sugar cane, hence, although the silage gave a higher milk production, its use is not economical, compared with sugar cane, in our conditions.

O cereal de Adlay: estudo de seu valor agrícola e nutricional para aves

Both experiments confirm Job's tears are inadequate as poultry feed due the low growing and high mortality shown on the groups receiving Job's tears meal. Considerations are done by the authors about Coix crops, that do not seem economical on the general condition of the country.

As tortas de cacau e de algodão na adubação da cana

This paper deals with a field trial executed to compare cotton seed and cacau meals in the fertilization of sugar cane, variety Co290. The design chosen was a latin square of 6 x 6. The following conclusions can be drawn: 1. Cottonseed meal revealed to be statistically superior to cacau meal, being even superior to the mineral fertilizers plus cacau meal treatment. 2. From an economical point of view cotton seed meal, as a fertilizer for sugar cane, can not be substituted by cacau meal.

Efeitos do enxofre e do boro e da inoculação em alfafa (Medicago sativa L.)

This paper deals with the results of a pot and plot experiment which was carried out to determine the influence of sulphur and boron and the effect seed inoculation with Rhizobium meliloti in the yield of alfafa. Sulphur was applied as flower of sulphur at the rates of 1,000 and 2,000 kg por hectare; boron was employed in the proportion of 15 kg of borax per hectare; both sulphur and boron were distributed broadcast before planting; the experimental design chosen for the field trial was a latin square of 6 x 6 with the following treatments: Number Treatment 1 Control 2 One dosis S + inoculation 3 Two dosis S +inoculation 4 One dosis S + B + inoculation 5 B + inoculation 6 inoculation The crop supplied four cuttings in an eleven months period. The pot experiment nearly confirmed the plot one. The following conclusions can be drawn: 1. The classification of treatments in a decrescent order was: l.o - two doses S + inoculation; 2.o - one dosis S +inoculation, S + B + inoculation, and B + inoculation (these treatmente were not statistically different); 3.o - control; 4.o - inoculation; 2 The vield due to the treatment two dosis S + inoculation was 22 per cent higher than the control one, a fact that suggests that the S supply in the soil studied ("terra roxa misturada") is not sufficient for the total requirements of alfafa; 3. From an economical point of view the best treatment was: one dosis B + inoculation which permits a net gain of Cr$ 12.527,30 per hectare per year; 4. Based on the mentioned results we recommend in soils of same type the following fertilization for alfafa. 5 tons limestone/hectare 300 kg serranafosfato and 600 kg hiperfosfato/ha 300 kg muriate of potash/ha 15 kg borax/ha and a medium organic manuring if the soil is very poor in organic matter.

Proceedings of the 1st International Conference on Applied Innovations in IT

This volume contains publications of the 1st International Conference on Applied Innovations in IT (ICAIIT), which took place in Koethen March 25th 2013. The conference is devoted to problems of applied research in the fields of mechanical and economical engineering, auotmation and communications as well as of data mining. The research results can be of interest for researchers and development engineers, who deal with theoretical base and the application of the knowledge in the respective areas.

Biologia do saguirú (Characidae, Curimatinae)

In Brazil all the fishes belonging to the sub-family Curimatinae are called « saguirú ». The present work gives a biological study of the Curimatus elegans Steind., a small fish without any economical importance, which is to be found along the whole brazilian coast, down till Paraguay. The specimens utilized for the present study come from Fortaleza (Ceará, north-eastern Brazil). The C. elegans is « ilyophagus », that means, it feeds itself exclusively with those organic materials to be found in mud, specially with microscopical algae. The intestines are very extent, some of them measuring about 9 to 11 times body's length. Studies have been made about growth and age of the C. elegans; the biggest sizes found were of 153 mm. for females and 88 mm. for males. The C. elegans shows developed sexual glands during a long period (April to September). The movements of the spermatozoa, in contact with water is of 40 to 50 seconds of intense movements, ceasing after 70 to 100 seconds. In contact with 0.5% NaCl-solution spermatozoa show a big increase in movements-time, that can last till about 25 minutes. The eggs' diameter measures 0.70 to 0.73 mm., mature and hydrated it attains 0.93 to 1,00 mm. There is a certain correlation between the size of the body and the quantity of eggs. Big specimens can produce a total of 200.000 eggs. The average quantity contained in 1 gr. and 1 cc. is 6018 and 6229 eggs, respectively. Maturity and spawning in laboratory has been obtained due to injections of suspension of fish-hypophysis. Three or four hours after the injection, fishes show more movement and evident signs of excitation, proceeding spawning after 5 to 6 hours. Males, persecuting females, describe successive circles (merry-go-round) - carroussel), swimming side by side with females up to water's surface, where sexual products are start beating dry, for there is no blood yet. Circulation-scheme is to be found on fig. 4 and 5. The swim-bladder and the stomach are but delineated; the intestine is formed by a cylindric tube, all closed. At the place, where later on there will open the mouth, we find a group of ciliary hairs that produce a liquid current, very evident by the semi-circle formed by attached solid particles. After 36 hours, opening of the mouth and formation of the gill slits begin. At the age of 90 hours (4 mm.) the larvas swim well and start to feed themselves; the digestive tube is now all open and the swimbladder works already. During the first days of life, larvas have an adhesive organ situated at their frontal region (fig. 7) in form of a crescent, by means of which they hang to surrounding vegetation (fig. 6). When the larva begins to swim and to feed itself and its yolk are having been absorbed. the adhesive organ retracts and disappears. While larvas and alevins feed themselves with plancton, they have small eye-teeth, which disappear,. when fishes become « ilyophagus ». There exist too, during their life as larvas, pharyngeal-teeth. The lateral line appears in the larva after 16 to 18 days; more or less at the same time all fins are completely developed. Shortly after, first scales appear (20 to 23 days). Evolution of intestines twisting followed (fig. 9). Larvas show at different parts of their bodies small of organs excretory functions, that are constituted by bottons in serial disposition, every one with an excretory canal that opens towards the outside. These formations disappear suddenly when larvas attain their phase of alevin. The existence of a great number of said formations at the caudal fin (fig. 12) is of great interest. In our experiences of breeding we have employed several thousands of C. elegans larvas in different environs and we made conditions of surrounding change (illumination), depth of water, temperature, presence of sand at bottom of aquariums and without sand, food). In this way we could compare the results obtained, estimate the action of each factor for the realisation of a good bring-up of larvas.