Medicina Dentária Digital – Presente e Futuro

Projeto de Pós-Graduação/Dissertação apresentado à Universidade Fernando Pessoa como parte dos requisitos para obtenção do grau de Mestre em Medicina Dentária

The role of synchronization in digital communications using chaos - Part II: Chaotic modulation and chaotic synchronization.

For pt. I see ibid., vol. 44, p. 927-36 (1997). In a digital communications system, data are transmitted from one location to another by mapping bit sequences to symbols, and symbols to sample functions of analog waveforms. The analog waveform passes through a bandlimited (possibly time-varying) analog channel, where the signal is distorted and noise is added. In a conventional system the analog sample functions sent through the channel are weighted sums of one or more sinusoids; in a chaotic communications system the sample functions are segments of chaotic waveforms. At the receiver, the symbol may be recovered by means of coherent detection, where all possible sample functions are known, or by noncoherent detection, where one or more characteristics of the sample functions are estimated. In a coherent receiver, synchronization is the most commonly used technique for recovering the sample functions from the received waveform. These sample functions are then used as reference signals for a correlator. Synchronization-based coherent receivers have advantages over noncoherent receivers in terms of noise performance, bandwidth efficiency (in narrow-band systems) and/or data rate (in chaotic systems). These advantages are lost if synchronization cannot be maintained, for example, under poor propagation conditions. In these circumstances, communication without synchronization may be preferable. The theory of conventional telecommunications is extended to chaotic communications, chaotic modulation techniques and receiver configurations are surveyed, and chaotic synchronization schemes are described

Design Optimization and Security For Communication Networks

In this work we introduce a new mathematical tool for optimization of routes, topology design, and energy efficiency in wireless sensor networks. We introduce a vector field formulation that models communication in the network, and routing is performed in the direction of this vector field at every location of the network. The magnitude of the vector field at every location represents the density of amount of data that is being transited through that location. We define the total communication cost in the network as the integral of a quadratic form of the vector field over the network area. With the above formulation, we introduce a mathematical machinery based on partial differential equations very similar to the Maxwell's equations in electrostatic theory. We show that in order to minimize the cost, the routes should be found based on the solution of these partial differential equations. In our formulation, the sensors are sources of information, and they are similar to the positive charges in electrostatics, the destinations are sinks of information and they are similar to negative charges, and the network is similar to a non-homogeneous dielectric media with variable dielectric constant (or permittivity coefficient). In one of the applications of our mathematical model based on the vector fields, we offer a scheme for energy efficient routing. Our routing scheme is based on changing the permittivity coefficient to a higher value in the places of the network where nodes have high residual energy, and setting it to a low value in the places of the network where the nodes do not have much energy left. Our simulations show that our method gives a significant increase in the network life compared to the shortest path and weighted shortest path schemes. Our initial focus is on the case where there is only one destination in the network, and later we extend our approach to the case where there are multiple destinations in the network. In the case of having multiple destinations, we need to partition the network into several areas known as regions of attraction of the destinations. Each destination is responsible for collecting all messages being generated in its region of attraction. The complexity of the optimization problem in this case is how to define regions of attraction for the destinations and how much communication load to assign to each destination to optimize the performance of the network. We use our vector field model to solve the optimization problem for this case. We define a vector field, which is conservative, and hence it can be written as the gradient of a scalar field (also known as a potential field). Then we show that in the optimal assignment of the communication load of the network to the destinations, the value of that potential field should be equal at the locations of all the destinations. Another application of our vector field model is to find the optimal locations of the destinations in the network. We show that the vector field gives the gradient of the cost function with respect to the locations of the destinations. Based on this fact, we suggest an algorithm to be applied during the design phase of a network to relocate the destinations for reducing the communication cost function. The performance of our proposed schemes is confirmed by several examples and simulation experiments. In another part of this work we focus on the notions of responsiveness and conformance of TCP traffic in communication networks. We introduce the notion of responsiveness for TCP aggregates and define it as the degree to which a TCP aggregate reduces its sending rate to the network as a response to packet drops. We define metrics that describe the responsiveness of TCP aggregates, and suggest two methods for determining the values of these quantities. The first method is based on a test in which we drop a few packets from the aggregate intentionally and measure the resulting rate decrease of that aggregate. This kind of test is not robust to multiple simultaneous tests performed at different routers. We make the test robust to multiple simultaneous tests by using ideas from the CDMA approach to multiple access channels in communication theory. Based on this approach, we introduce tests of responsiveness for aggregates, and call it CDMA based Aggregate Perturbation Method (CAPM). We use CAPM to perform congestion control. A distinguishing feature of our congestion control scheme is that it maintains a degree of fairness among different aggregates. In the next step we modify CAPM to offer methods for estimating the proportion of an aggregate of TCP traffic that does not conform to protocol specifications, and hence may belong to a DDoS attack. Our methods work by intentionally perturbing the aggregate by dropping a very small number of packets from it and observing the response of the aggregate. We offer two methods for conformance testing. In the first method, we apply the perturbation tests to SYN packets being sent at the start of the TCP 3-way handshake, and we use the fact that the rate of ACK packets being exchanged in the handshake should follow the rate of perturbations. In the second method, we apply the perturbation tests to the TCP data packets and use the fact that the rate of retransmitted data packets should follow the rate of perturbations. In both methods, we use signature based perturbations, which means packet drops are performed with a rate given by a function of time. We use analogy of our problem with multiple access communication to find signatures. Specifically, we assign orthogonal CDMA based signatures to different routers in a distributed implementation of our methods. As a result of orthogonality, the performance does not degrade because of cross interference made by simultaneously testing routers. We have shown efficacy of our methods through mathematical analysis and extensive simulation experiments.

LISA SERGIO: HOW MUSSOLINI'S "GOLDEN VOICE" OF PROPAGANDA CREATED AN AMERICAN MASS COMMUNICATION CAREER

In 1937 Lisa Sergio, "The Golden Voice" of fascist broadcasting from Rome, fled Italy for the United States. Though her mother was American, Sergio was classified as an enemy alien once the United States entered World War II. Yet Sergio became a U.S. citizen in 1944 and built a successful career in radio, working first at NBC and then WQXR in New York City in the days when women's voices were not thought to be appropriate for news or "serious" programming. When she was blacklisted as a communist in the early 1950s, Sergio compensated for the loss of radio employment by becoming principally an author and lecturer in Washington, D.C., until her death in 1989. This dissertation, based on her personal papers, is the first study of Sergio's American mass communication career. It points out the personal, political and social obstacles she faced as a woman in her 52-year career as a commentator on varied aspects of world affairs, religion and feminism. This study includes an examination of the FBI investigations of Sergio and the anti-communist campaigns conducted against her. It concludes that Sergio's success as a public communicator was predicated on both her unusual talents and her ability to transform her public image to reflect ideal American values of womanhood in shifting political climates.

Making it in the Modern Job Market: A Study of Communication among the Deaf and Hard of Hearing Population

Gemstone Team AUDIO (Assessing and Understanding Deaf Individuals' Occupations)

A location-based communication platform: integrating file sharing with interpersonal contact

Gemstone Team FLIP (File Lending in Proximity)

Special issue on design and programming of signal processors for multimedia communication:Special issue on design and programming of signal processors for multimedia communication

The technical challenges in the design and programming of signal processors for multimedia communication are discussed. The development of terminal equipment to meet such demand presents a significant technical challenge, considering that it is highly desirable that the equipment be cost effective, power efficient, versatile, and extensible for future upgrades. The main challenges in the design and programming of signal processors for multimedia communication are, general-purpose signal processor design, application-specific signal processor design, operating systems and programming support and application programming. The size of FFT is programmable so that it can be used for various OFDM-based communication systems, such as digital audio broadcasting (DAB), digital video broadcasting-terrestrial (DVB-T) and digital video broadcasting-handheld (DVB-H). The clustered architecture design and distributed ping-pong register files in the PAC DSP raise new challenges of code generation.

Intelligent Assembly Time Analysis Using a Digital Knowledge-Based Approach

The implementation of effective time analysis methods fast and accurately in the era of digital manufacturing has become a significant challenge for aerospace manufacturers hoping to build and maintain a competitive advantage. This paper proposes a structure oriented, knowledge-based approach for intelligent time analysis of aircraft assembly processes within a digital manufacturing framework. A knowledge system is developed so that the design knowledge can be intelligently retrieved for implementing assembly time analysis automatically. A time estimation method based on MOST, is reviewed and employed. Knowledge capture, transfer and storage within the digital manufacturing environment are extensively discussed. Configured plantypes, GUIs and functional modules are designed and developed for the automated time analysis. An exemplar study using an aircraft panel assembly from a regional jet is also presented. Although the method currently focuses on aircraft assembly, it can also be well utilized in other industry sectors, such as transportation, automobile and shipbuilding. The main contribution of the work is to present a methodology that facilitates the integration of time analysis with design and manufacturing using a digital manufacturing platform solution.

The Architecture of Seduction: An Analysis on Digital Architectures within Consumer Society

Currently new digital tools used in architecture are often at the service of a conception of architecture as a consumer society’s cultural good. Within this neoliberal cultural frame, architects’ social function is no longer seen as the production of urban facts with sense of duty, but as a part within the symbolic logic that rules the social production of cultural values as it was defined by Veblen and developed by Baudrillard. As a result, the potential given by the new digital tools used in representation has shifted from an instrument used to verify a built project to two different main models: At the one hand the development of pure virtual architectures that are exclusively configured within their symbolic value as artistic “images” easily reproducible. On the other hand the development of all those projects which -even maintaining their attention to architecture as a built fact- base their symbolic value on the author’s image and on virtual aesthetics and logics that prevail over architecture’s materiality. Architects’ sense of duty has definitely reached a turning point.

The rise of the digital citizen-stakeholder: rebalancing multistakeholder governance

The principle feature in the evolution of the internet has been its ever growing reach to include old and young, rich and poor. The internet’s ever encroaching presence has transported it from our desktop to our pocket and into our glasses. This is illustrated in the Internet Society Questionnaire on Multistakeholder Governance, which found the main factors affecting change in the Internet governance landscape were more users online from more countries and the influence of the internet over daily life. The omnipresence of the internet is self- perpetuating; its usefulness grows with every new user and every new piece of data uploaded. The advent of social media and the creation of a virtual presence for each of us, even when we are not physically present or ‘logged on’, means we are fast approaching the point where we are all connected, to everyone else, all the time. We have moved far beyond the point where governments can claim to represent our views which evolve constantly rather than being measured in electoral cycles.
The shift, which has seen citizens as creators of content rather than consumers of it, has undermined the centralist view of democracy and created an environment of wiki democracy or crowd sourced democracy. This is at the heart of what is generally known as Web 2.0, and widely considered to be a positive, democratising force. However, we argue, there are worrying elements here too. Government does not always deliver on the promise of the networked society as it involves citizens and others in the process of government. Also a number of key internet companies have emerged as powerful intermediaries harnessing the efforts of the many, and re- using and re-selling the products and data of content providers in the Web 2.0 environment. A discourse about openness and transparency has been offered as a democratising rationale but much of this masks an uneven relationship where the value of online activity flows not to the creators of content but to those who own the channels of communication and the metadata that they produce.
In this context the state is just one stakeholder in the mix of influencers and opinion formers impacting on our behaviours, and indeed our ideas of what is public. The question of what it means to create or own something, and how all these new relationships to be ordered and governed are subject to fundamental change. While government can often appear slow, unwieldy and even irrelevant in much of this context, there remains a need for some sort of political control to deal with the challenges that technology creates but cannot by itself control. In order for the internet to continue to evolve successfully both technically and socially it is critical that the multistakeholder nature of internet governance be understood and acknowledged, and perhaps to an extent, re- balanced. Stakeholders can no longer be classified in the broad headings of government, private sector and civil society, and their roles seen as some sort of benign and open co-production. Each user of the internet has a stake in its efficacy and each by their presence and participation is contributing to the experience, positive or negative of other users as well as to the commercial success or otherwise of various online service providers. However stakeholders have neither an equal role nor an equal share. The unequal relationship between the providers of content and those who simple package up and transmit that content - while harvesting the valuable data thus produced - needs to be addressed. Arguably this suggests a role for government that involves it moving beyond simply celebrating and facilitating the on- going technological revolution. This paper reviews the shifting landscape of stakeholders and their contribution to the efficacy of the internet. It will look to critically evaluate the primacy of the individual as the key stakeholder and their supposed developing empowerment within the ever growing sea of data. It also looks at the role of individuals in wider governance roles. Governments in a number of jurisdictions have sought to engage, consult or empower citizens through technology but in general these attempts have had little appeal. Citizens have been too busy engaging, consulting and empowering each other to pay much attention to what their governments are up to. George Orwell’s view of the future has not come to pass; in fact the internet has insured the opposite scenario has come to pass. There is no big brother but we are all looking over each other’s shoulder all the time, while at the same time a number of big corporations are capturing and selling all this collective endeavour back to us.

Cross-layer Energy-Efficiency Optimization of Packet Based Wireless MIMO Communication Systems

Energy in today's short-range wireless communication is mostly spent on the analog- and digital hardware rather than on radiated power. Hence,purely information-theoretic considerations fail to achieve the lowest energy per information bit and the optimization process must carefully consider the overall transceiver. In this paper, we propose to perform cross-layer optimization, based on an energy-aware rate adaptation scheme combined with a physical layer that is able to properly adjust its processing effort to the data rate and the channel conditions to minimize the energy consumption per information bit. This energy proportional behavior is enabled by extending the classical system modes with additional configuration parameters at the various layers. Fine grained models of the power consumption of the hardware are developed to provide awareness of the physical layer capabilities to the medium access control layer. The joint application of the proposed energy-aware rate adaptation and modifications to the physical layer of an IEEE802.11n system, improves energy-efficiency (averaged over many noise and channel realizations) in all considered scenarios by up to 44%.

On Passive Intermodulation Test of Analog and Digital Systems

This paper presents initial results of evaluating suitability of the conventional two-tone CW passive intermodulation (PIM) test for characterization of modulated signal distortion by passive nonlinearities in base station antennas and RF front-end. A comprehensive analysis of analog and digitally modulated waveforms in the transmission lines with weak distributed nonlinearity has been performed using the harmonic balance analysis and X-parameters in Advanced Design System (ADS) simulator. The nonlinear distortion metrics used in the conventional two-tone CW PIM test have been compared with the respective spectral metrics applied to the modulated waveforms, such as adjacent channel power ratio (ACPR) and error vector magnitude (EVM). It is shown that the results of two-tone CW PIM tests are consistent with the metrics used for assessment of signal integrity of both analog and digitally modulated waveforms.

Passive Intermodulation of Analog and Digital Signals on Transmission Lines with Distributed Nonlinearities: Modelling and Characterization

Passive intermodulation (PIM) often limits the performance of communication systems with analog and digitally-modulated signals and especially of systems supporting multiple carriers. Since the origins of the apparently multiple physical sources of nonlinearity causing PIM are not fully understood, the behavioral models are frequently used to describe the process of PIM generation. In this paper a polynomial model of memoryless nonlinearity is deduced from PIM measurements of a microstrip line with distributed nonlinearity with two-tone CW signals. The analytical model of nonlinearity is incorporated in Keysight Technology’s ADS simulator to evaluate the metrics of signal fidelity in the receive band for analog and digitally-modulated signals. PIM-induced distortion and cross-band interference with modulated signals are compared to those with two-tone CW signals. It is shown that conventional metrics can be applied to quantify the effect of distributed nonlinearities on signal fidelity. It is found that the two-tone CW test provides a worst-case estimate of cross-band interference for two-carrier modulated signals whereas with a three-carrier signal PIM interference in the receive band is noticeably overestimated. The simulated constellation diagrams for QPSK signals demonstrate that PIM interference exhibits the distinctive signatures of correlated distortion and this indicates that there are opportunities for mitigating PIM interference and that PIM interference cannot be treated as noise. One of the interesting results is that PIM distortion on a transmission line results in asymmetrical regrowth of output PIM interference for modulated signals.

Digital unterwegs ohne das virtuelle soziale Netzwerk – qualitative Studie über Facebook-Verweigerung und Virtual Identity Suicide

Das virtuelle soziale Netzwerk Facebook feiert seinen zehnten Geburtstag. Mit über einer Milliarde aktiver Nutzer ist es seit seiner Entstehung zur weltweit größten Internetplattform zur Kommunikation avanciert. Dennoch gibt es in Deutschland eine große Anzahl an Menschen, die sich zwar täglich im Internet bewegt, aber auf eine Mitgliedschaft bei Facebook verzichtet. In dieser Arbeit werden die Gründe untersucht, warum manche Personen Facebook nicht nutzen. Die Leitfrage der Arbeit lautet: „Warum nutzen ausgewählte deutsche Internetnutzer Facebook nicht?“. Es wird zwischen zwei unterschiedlichen Personenkreisen, den Nicht- und den Ex-Nutzern, unterschieden. Basierend auf Leitfadeninterviews mit 25 Befragten, die mittels einer qualitativen Inhaltsanalyse ausgewertet werden, werden elf verschiedene Gründe für eine Verweigerung von Facebook identifiziert. Für die Nicht-Nutzer stellt die Art der Kommunikation den zentralen Grund dar, Facebook nicht zu verwenden. Die Ex-Nutzer wiederum sehen den fehlenden Nutzen der Anwendung als wichtigstes Argument gegen Facebook.

Living and dealing with RF impairments in communication transceivers

This paper provides an overview of the sources and effects of the RF impairments limiting and rendering the performance of the future wireless communication transceivers costly as well as hindering their wide-spread use in commercial products. As transmission bandwidths and carrier frequencies increase effect of these impairments worsen. This paper studies and presents analytical evaluations of the performance degradation due to the RF impairments in terms of bit-error-rate and image rejection ratio. The paper also give highlights of the various aspects of the research carried out in mitigating the effects of these impairments primarily in the digital signal processing domain at the baseband as well as providing low-complexity hardware implementations of such algorithms incorporating a number of power and area saving techniques.