La déqualification des immigrantes universitaires : le rôle de l’origine ethnique

Chicha (2009) constate un « trou noir » dans la littérature en ce qui a trait au processus qui engendre une plus forte déqualification à l’endroit des immigrantes universitaires. Ce « trou noir » est considéré comme problématique. D’une part, le gouvernement québécois tente de mettre en place des politiques d’immigration qui recrutent des immigrants ayant un capital humain élevé dans l’espoir qu’ils s’insèrent facilement sur marché de l’emploi. D’autre part, la présence plus marquée de déqualification de ce bassin de main d’œuvre démontre un écart entre la volonté politique et la situation réelle en emploi de ces immigrants. Il semble donc exister un problème de discrimination systémique lorsqu’il est question de déqualification des travailleuses immigrantes. Par souci d’équité et dans l’espoir d’avoir une meilleure compréhension du processus menant à la déqualification des immigrantes les objectifs de cette thèse sont de 1- mieux saisir le concept de discrimination en emploi et 2- mettre en place des mesures mieux adaptées pour s’attaquer à cette discrimination. Pour expliquer ce « trou noir », nous considérons que l’approche systémique est pertinente à cause de sa une vision holistique. Nous avons rencontré 52 immigrantes universitaires qui ont partagé leur parcours professionnel pré et post-migratoire. Les thématiques abordées touchaient à de nombreux sujets telles que leur formation, leur expérience professionnelle, leur stratégie d’unité familiale immigrante, leurs démarches concernant tant le processus de reconnaissance de leurs diplômes étrangers que leur insertion sur le marché de l’emploi, le climat de travail, etc. Les résultats de cette recherche indiquent que la discrimination en emploi est toujours présente sur le marché de l’emploi au Québec. De plus, l’origine ethnique, tel que la couleur de la peau, affecte les attitudes, comportements et propos des acteurs du milieu du travail à l’endroit des xiii immigrantes universitaires. L’application des typologies de Van Laer et Janssens (2011) et de Bonilla-Silva (2006) contribue à l’identification des attitudes, des comportements et des propos pouvant être considérés comme étant du racisme subtil. L’un des avancements de cette thèse est l’amélioration du cadre d’analyse systémique afin de mieux comprendre les difficultés à l’emploi des immigrantes universitaires. Les différentes théories empruntées de la psychologie sociale telles que les théories de similarité attraction, de catégorisation sociale et de qualité d’échanges entre subordonné et supérieur (Roberson et Block, 2001) permettent de peaufiner ce cadre d’analyse systémique, puisqu’il permet de mieux saisir les relations, parfois complexes, qui peuvent s’établir entre les différents acteurs et résulter en de la discrimination flagrante ou subtile.

Le cinéma des premiers temps à Montréal et l'institution du théâtre

Cet article propose un tableau précis des liens étroits qui unirent le cinéma des premiers temps à l’institution théâtrale montréalaise existante. À cette époque, le cinéma joue un rôle central dans les stratégies d’émergence du théâtre francophone qui s’éloigne alors du théâtre anglophone, son rival issu de la ville de New York, tout autant qu’il joue un rôle d’attrait dans un contexte de vive concurrence. Non seulement cela donne-t-il lieu à des scènes mixtes (théâtrales et cinématographiques), mais également à une interprétation plus profonde de deux arts qui aboutit aux premières manifestations d’un cinéma-théâtre québécois.

Fibre optic sensor for the detection of adulterant traces in coconut oil

The design and development of a fibre optic evanescent wave refractometer for the detection of trace amounts of paraffin oil and palm oil in coconut oil is presented. This sensor is based on a side-polished plastic optical fibre. At the sensing region, the cladding and a small portion of the core are removed and the fibre nicely polished. The sensing region is fabricated in such a manner that it sits perfectly within a bent mould. This bending of the sensing region enhances its sensitivity. The oil mixture of different mix ratios is introduced into the sensing region and we observed a sharp decrease in the output intensity. The observed variation in the intensity is found to be linear and the detection limit is 2% (by volume) paraffin oil/palm oil in coconut oil. The resolution of this refractometric sensor is of the order of 10−3. Since coconut oil is consumed in large volumes as edible oil in south India, this fibre optic sensor finds great relevance for the detection of adulterants such as paraffin oil or palm oil which are readily miscible in coconut oil. The advantage of this type of sensor is that it is inexpensive and easy to set up. Another attraction of the side-polished fibre is that only a very small amount of analyte is needed and its response time is only 7 s.

Studies on new processing aids and other compounding ingredients in special purpose rubbers

In the first part of the study we probed the effectiveness of rice bran oil as a multipurpose compounding ingredient for nitrile (NBR) and chloroprene (CR) rubbers. This oil has already been successfully employed in the compounding of NR and SBR in this laboratory.In this context we thought it worthwhile to try this oil in the polar rubbers viz, NBR and CR also. The principle of like dissolves like as applicable to solvents is equally applicable while selecting a plasticiser, elastomer combination. Because of the compatibility considerations polar plasticisers are preferred for polar rubbers like NBR and CR. Although plasticisation is a physical phenomenon and no chemical reaction is involved, the chemical structure of plasticisers determines how much physical attraction there is between the rubber and the plasticiser. In this context it is interesting to note that the various fatty acids present in rice bran oil have a long paraffinic chain, characteristic of waxes, with an acid group at the end of the molecule. The paraffinic end of the molecule contributes lubricating effects and limits compatibility whereas the acid end group contributes some polarity and is also chemically reactive. Because of absorption of acid group on the surface of pigments, these acids will have active pigment wetting characteristics also. These factors justifies the role of rice bran oil as a co-activator and lubricating agent for NBR and CR. In fact in our study we successfully replaced stearic acid as co-activator and aromatic oillDOP as processing aid for CR and NBR with rice bran oil.This part of the study has got special significance in the fact that rubber industry now heavily depends on petroleum industry for process oils. The conventional process oils like aromatic, naphthenic and paraffinic oils are increasingly becoming costlier, as its resources in nature are fast depleting. Moreover aromatic process oils are reported to be carcinogenic because of the presence of higher levels of polycyclic aromatic compounds in these oils.As a result of these factors, a great amount research is going on world over for newer processing aids which are cost effective, nontoxic and performanance wise at par with the conventional ones used in the rubber industry. Trials with vegetable oils in this direction is worth trying.Antioxidants are usually added to the rubber compound to minimise ageing effects from heat, light, oxygen etc. As rice bran oil contains significant amount of tocopherols and oryzanol which are natural antioxidants, we replaced a phenolic antioxidant like styrenated phenol (SP) from the compound recipe of both the rubbers with RBO and ascertained whether this oil could function in the role of antioxidant as well.Preparation and use of epoxidised rice bran oil as plasticiser has already been reported.The crude rice bran oil having an iodine value of 92 was epoxidised in this laboratory using peracetic acid in presence of sulphuric acid as catalyst. The epoxy content of the epoxidised oil was determined volumetrically by treating a known weight of the oil with excess HCI and back titrating the residual HCI with standard alkali solution. The epoxidised oil having an epoxy content of 3.4% was tried in the compounding of NBR and CR as processing aids. And results of these investigations are also included in this chapter. In the second part of the study we tried how RBO/ERBO could perform when used as a processing aid in place of aromatic oil in the compounding of black filled NRCR blends. Elastomers cannot have all the properties required for a particular applications, so it is common practice in rubber industry to blend two elastomers to have desired property for the resulting blend.In this RBO/ERBO was tried as a processing aid for plasticisation, dispersion of fillers, and vulcanisation of black filled NR-CR blends.Aromatic oil was used as a control. The results of our study indicate that these oils could function as a processing aid and when added together with carbon black function as a cure accelerator also.PVC is compatible with nitrile rubber in all proportions, provided NBR has an acrylonitrile content of 25 to 40%. Lower or higher ACN content in NBR makes it incompatible with PVC.PVC is usually blended with NBR at high temperatures. In order to reduce torque during mixing, additional amounts of plasticisers like DOP are added. The plasticiser should be compatible both with PVC and NBR so as to get a homogeneous blend. Epoxidised soyaben oil is reported to have been used in the compounding of PVC as it can perfonn both as an efficient plasticiser and heat stabilizer.At present DOP constitute the largest consumed plasticiser in the PVC compounding. The migration of this plasticiser from food packaging materials made of PVC poses great health hazards as this is harmful to human body. In such a scenario we also thought it worthwhile to see whether DOP could be replaced by rice bran oil in the compounding of NBR-PVC blends Different blends of NBR-PVC were prepared with RBO and were vulcanized using sulphur and conventional accelerators. The various physical and mechanical properties of the vulcanisates were evaluated and compared with those prepared with DOP as the control plasticiser. Epoxidised rice bran oil was also tried as plasticiser for the preparation of NBR-PVC blends. A comparison of the processability and cure characteristics of the different blends prepared with DOP and ERBO showed that ERBO based blends have better processability and lower cure time values. However the elastographic maximum torque values are higher for the DOP based blends. Almost all of the physical properties evaluated are found to be slightly better for the DOP based blends over the ERBO based ones. However a notable feature of the ERBO based blends is the better percentage retention of elongation at break values after ageing over the DOP based blends. The results of these studies using rice bran oil and its epoxidised variety indicated that they could be used as efficient plasticisers in place of DOP and justifies their role as novel, nontoxic, and cheap plasticisers for NBR-PVC blends.

On infinite graphs and related matrices

This thesis Entitled On Infinite graphs and related matrices.ln the last two decades (iraph theory has captured wide attraction as a Mathematical model for any system involving a binary relation. The theory is intimately related to many other branches of Mathematics including Matrix Theory Group theory. Probability. Topology and Combinatorics . and has applications in many other disciplines..Any sort of study on infinite graphs naturally involves an attempt to extend the well known results on the much familiar finite graphs. A graph is completely determined by either its adjacencies or its incidences. A matrix can convey this information completely. This makes a proper labelling of the vertices. edges and any other elements considered, an inevitable process. Many types of labelling of finite graphs as Cordial labelling, Egyptian labelling, Arithmetic labeling and Magical labelling are available in the literature. The number of matrices associated with a finite graph are too many For a study ofthis type to be exhaustive. A large number of theorems have been established by various authors for finite matrices. The extension of these results to infinite matrices associated with infinite graphs is neither obvious nor always possible due to convergence problems. In this thesis our attempt is to obtain theorems of a similar nature on infinite graphs and infinite matrices. We consider the three most commonly used matrices or operators, namely, the adjacency matrix

Protein Folding Simulations: Confinement, External Fields and Sequence Design

The present Thesis looks at the problem of protein folding using Monte Carlo and Langevin simulations, three topics in protein folding have been studied: 1) the effect of confining potential barriers, 2) the effect of a static external field and 3) the design of amino acid sequences which fold in a short time and which have a stable native state (global minimum). Regarding the first topic, we studied the confinement of a small protein of 16 amino acids known as 1NJ0 (PDB code) which has a beta-sheet structure as a native state. The confinement of proteins occurs frequently in the cell environment. Some molecules called Chaperones, present in the cytoplasm, capture the unfolded proteins in their interior and avoid the formation of aggregates and misfolded proteins. This mechanism of confinement mediated by Chaperones is not yet well understood. In the present work we considered two kinds of potential barriers which try to mimic the confinement induced by a Chaperon molecule. The first kind of potential was a purely repulsive barrier whose only effect is to create a cavity where the protein folds up correctly. The second kind of potential was a barrier which includes both attractive and repulsive effects. We performed Wang-Landau simulations to calculate the thermodynamical properties of 1NJ0. From the free energy landscape plot we found that 1NJ0 has two intermediate states in the bulk (without confinement) which are clearly separated from the native and the unfolded states. For the case of the purely repulsive barrier we found that the intermediate states get closer to each other in the free energy landscape plot and eventually they collapse into a single intermediate state. The unfolded state is more compact, compared to that in the bulk, as the size of the barrier decreases. For an attractive barrier modifications of the states (native, unfolded and intermediates) are observed depending on the degree of attraction between the protein and the walls of the barrier. The strength of the attraction is measured by the parameter $\epsilon$. A purely repulsive barrier is obtained for $\epsilon=0$ and a purely attractive barrier for $\epsilon=1$. The states are changed slightly for magnitudes of the attraction up to $\epsilon=0.4$. The disappearance of the intermediate states of 1NJ0 is already observed for $\epsilon =0.6$. A very high attractive barrier ($\epsilon \sim 1.0$) produces a completely denatured state. In the second topic of this Thesis we dealt with the interaction of a protein with an external electric field. We demonstrated by means of computer simulations, specifically by using the Wang-Landau algorithm, that the folded, unfolded, and intermediate states can be modified by means of a field. We have found that an external field can induce several modifications in the thermodynamics of these states: for relatively low magnitudes of the field ($<2.06 \times 10^8$ V/m) no major changes in the states are observed. However, for higher magnitudes than ($6.19 \times 10^8$ V/m) one observes the appearance of a new native state which exhibits a helix-like structure. In contrast, the original native state is a $\beta$-sheet structure. In the new native state all the dipoles in the backbone structure are aligned parallel to the field. The design of amino acid sequences constitutes the third topic of the present work. We have tested the Rate of Convergence criterion proposed by D. Gridnev and M. Garcia ({\it work unpublished}). We applied it to the study of off-lattice models. The Rate of Convergence criterion is used to decide if a certain sequence will fold up correctly within a relatively short time. Before the present work, the common way to decide if a certain sequence was a good/bad folder was by performing the whole dynamics until the sequence got its native state (if it existed), or by studying the curvature of the potential energy surface. There are some difficulties in the last two approaches. In the first approach, performing the complete dynamics for hundreds of sequences is a rather challenging task because of the CPU time needed. In the second approach, calculating the curvature of the potential energy surface is possible only for very smooth surfaces. The Rate of Convergence criterion seems to avoid the previous difficulties. With this criterion one does not need to perform the complete dynamics to find the good and bad sequences. Also, the criterion does not depend on the kind of force field used and therefore it can be used even for very rugged energy surfaces.

A Compilation Strategy for Numerical Programs Based on Partial Evaluation

This work demonstrates how partial evaluation can be put to practical use in the domain of high-performance numerical computation. I have developed a technique for performing partial evaluation by using placeholders to propagate intermediate results. For an important class of numerical programs, a compiler based on this technique improves performance by an order of magnitude over conventional compilation techniques. I show that by eliminating inherently sequential data-structure references, partial evaluation exposes the low-level parallelism inherent in a computation. I have implemented several parallel scheduling and analysis programs that study the tradeoffs involved in the design of an architecture that can effectively utilize this parallelism. I present these results using the 9- body gravitational attraction problem as an example.

Public and student awareness science: recreational science as a catalyst

When discussing the traditional and new missions of higher education (1996 Report to UNESCO of the International Commission on Education for the 21st Century) Jacques Delors stated that "Excessive attraction to social sciences has broken equilibrium of available graduates for workforce, thus causing doubts of graduates and employers on the quality of knowledge provided by higher education". Likewise, when discussing the progress of science and technology, the 1998 UNESCO World Conference on Higher Education concluded that "Another challenge concerts the latest advancements of Science, the sine qua non of sustainable development"; and that “with Information Technology, the unavoidable invasion of virtual reality has increased the distance between industrial and developing countries". Recreational Science has a long tradition all over the Educational World; it aims to show the basic aspects of Science, aims to entertain, and aims to induce thinking. Until a few years ago, this field of knowledge consisted of a few books, a few kits and other classical (yet innovative) ways to popularize the knowledge of Nature and the laws governing it. In Spain, the interest for recreational science has increased in the last years. First, new recreational books are being published and found in bookstores. Second the number of Science-related museums and exhibits is increasing. And third, new television shows are produced and new short science-based, superficial sketches are found in variety programs. However, actual programs in Spanish television dealing seriously with Science are scarce. Recreational Science, especially that related to physical phenomena like light or motion, is generally found at Science Museums because special equipment is required. On the contrary, Science related mathematics, quizzes and puzzles use to gather into books, e.g. the extensive collections by Martin Gardner. However, lately Science podcasts have entered the field of science communication. Not only traditional science journals and television channels are providing audio and video podcasts, but new websites deal exclusively with science podcasts, in particular on Recreational Science. In this communication we discuss the above mentioned trends and show our experience in the last two years in participating at Science Fairs and university-sponsored events to attract students to science and technology careers. We show a combination of real examples (e.g., mathemagic), imagination, use of information technology, and use of social networks. We present as well an experience on designing a computational, interactive tool to promote chemistry among high school, prospective students using computers ("Dancing with Bionanomolecules"). Like the concepts related to Web 2.0, it has been already proposed that a new framework for communication of science is emerging, i.e., Science Communication 2.0, where people and institutions develop new innovative ways to explain science topics to diverse publics – and where Recreational Science is likely to play a leading role

WMR navigation using local potential field corridors and narrow local occupancy grid perception

Path planning and control strategies applied to autonomous mobile robots should fulfil safety rules as well as achieve final goals. Trajectory planning applications should be fast and flexible to allow real time implementations as well as environment interactions. The methodology presented uses the on robot information as the meaningful data necessary to plan a narrow passage by using a corridor based on attraction potential fields that approaches the mobile robot to the final desired configuration. It employs local and dense occupancy grid perception to avoid collisions. The key goals of this research project are computational simplicity as well as the possibility of integrating this method with other methods reported by the research community. Another important aspect of this work consist in testing the proposed method by using a mobile robot with a perception system composed of a monocular camera and odometers placed on the two wheels of the differential driven motion system. Hence, visual data are used as a local horizon of perception in which trajectories without collisions are computed by satisfying final goal approaches and safety criteria

Local WMR navigation with monocular data

This article presents recent WMR (wheeled mobile robot) navigation experiences using local perception knowledge provided by monocular and odometer systems. A local narrow perception horizon is used to plan safety trajectories towards the objective. Therefore, monocular data are proposed as a way to obtain real time local information by building two dimensional occupancy grids through a time integration of the frames. The path planning is accomplished by using attraction potential fields, while the trajectory tracking is performed by using model predictive control techniques. The results are faced to indoor situations by using the lab available platform consisting in a differential driven mobile robot

Local model predictive control experiences with differential driven wheeled mobile robots

This work extends a previously developed research concerning about the use of local model predictive control in differential driven mobile robots. Hence, experimental results are presented as a way to improve the methodology by considering aspects as trajectory accuracy and time performance. In this sense, the cost function and the prediction horizon are important aspects to be considered. The aim of the present work is to test the control method by measuring trajectory tracking accuracy and time performance. Moreover, strategies for the integration with perception system and path planning are briefly introduced. In this sense, monocular image data can be used to plan safety trajectories by using goal attraction potential fields

La proyección de imagen a partir de Soft Power, mediante Nation Branding y Diplomacia Pública en el caso de Japón, durante el periodo 2002 – 2010

En el actual contexto de globalización y con el comienzo de la era de la información, cada vez más Estados han buscado proyectar una imagen favorable con el objetivo de atraer atención y crear una reputación que permitan cumplir objetivos de política exterior y fomentar el desarrollo económico, logrando de esta manera un posicionamiento en el sistema internacional mediante estrategias novedosas, que incluyen elementos tanto diplomáticos, políticos, económicos, como comerciales y culturales. Para Japón, Nation Branding y la diplomacia pública han sido dos de las principales herramientas para lograr este reposicionamiento internacional, resaltando atractivos como las tradiciones culturales, el turismo, los incentivos para negocios, y trabajando en conjunto entre el gobierno nacional, el sector privado y la sociedad civil para crear relaciones entre el país y gobiernos y sociedades a nivel internacional.

Asociación entre relaciones románticas y la calidad de sueño percibida por jóvenes universitarios

Introducción: Uno de los aspectos con mayor variación durante la adolescencia es el sueño, el cual se ve afectado por factores biológicos así como por los estados afectivos y emocionales. En esta etapa, los individuos establecen sus primeras relaciones sentimentales románticas, vínculos esenciales para la maduración de las relaciones sociales y psicosexuales. Este trabajo busca determinar la asociación existente entre las relaciones sentimentales románticas y sus características, con la calidad sueño percibida por los jóvenes. Metodología: Estudio realizado en una población de 1794 estudiantes de ciencias de la salud entre los 18 y 25 años de edad en Bogotá, Colombia, entre 2012 y 2013. Se obtuvo una muestra probabilística con asignación proporcional de 443 sujetos, estratificada por programa académico y sexo. Utilizando dos cuestionarios de auto reporte se exploraron las características de las relaciones sentimentales y la calidad de sueño percibida. Resultados: El 64% (IC 95%: 59,4-68,9%) de la población estudiada se encontró en una relación sentimental romántica. Estos sujetos tuvieron latencias de sueño prolongadas con menor frecuencia que quienes no tenían en una relación (p <0,05). La calidad de sueño percibida se asoció al nivel de satisfacción que tuvieron los sujetos en su relación, así como la atracción por su pareja. Rasgos obsesivos, ansiosos, temerosos y evitativos en la relación disminuyeron la calidad de sueño percibida. Conclusión: Las relaciones sentimentales románticas y sus características se asocian con la calidad de sueño percibida por los individuos. Se requieren estudios que determinen causalidad en esta asociación y definan potenciales estrategias de intervención al respecto.

El enfoque del neuromarketing aplicado al mercado colombiano

GLOSARIO • Neuromarketing: El Neuromarketing consiste en la aplicación de las técnicas de investigación de las Neurociencias a la investigación de marketing tradicional. A través de técnicas de medición de la actividad cerebral (como el EGG o la fMRI), las “respuestas” de los entrevistados a distintos estímulos (por ejemplo, anuncios publicitarios) son leídas directamente de su actividad cerebral (Neuromarca) • Neurociencia: La neurociencia estudia la estructura y la función química, farmacología, y patología del sistema nervioso y de cómo los diferentes elementos del sistema nervioso interactúan y dan origen a la conducta (Neurologia y ove) • Mercadeo: Según la American Marketing Asociation (A.M.A.), el marketing es una forma de organizar un conjunto de acciones y procesos a la hora de crear un producto “para crear, comunicar y entregar valor a los clientes, y para manejar las relaciones” y su finalidad es beneficiar a la organización satisfaciendo a los clientes (Revista PYM) • Cerebro: Es la parte más evolucionada y grande del encéfalo. En el cerebro se dan la cognición, el pensamiento y las emociones; también la memoria y el lenguaje. Tiene dos hemisferios, cada uno con 4 lóbulos: frontal, temporal, parietal y occipital. La parte más externa es el cortex cerebral, que tiene unos repliegues que forman circunvoluciones y cisuras (Enciclopedia Salud) • Estrategia Empresarial: Es la que define las diferentes líneas de acción que debe asumir cada uno de los individuos que desempeñan las funciones dentro de la misma y permite a toda organización generar una ventaja competitiva en el mercado en el que desenvuelve sus actividades, generando mayores utilidades y permitiendo aprovechar cada una de las oportunidades dándole un valor agregado (Emagister) • Integración sensorial: Es un proceso Neurológico por el cual las sensaciones que provienen de nuestro entornoy de nuestro cuerpo, son organizadas e interpretadas para su uso (Enciclopedia Salud) • Top of Mind: Es el indicador que revela cuál es la marca que, cuando le preguntan por una categoría específica, se le viene a la mente en primer lugar al mayor porcentaje de personas (Gerente) • Valor Agregado: Valor agregado o valor añadido, en términos de marketing, es una característica o servicio extra que se le da a un producto o servicio, con el fin de darle un mayor valor comercial; generalmente se trata de una característica o servicio poco común, o poco usado por los competidores, y que le da al negocio o empresa cierta diferenciación (Crece Negocios)

El impacto de los clusters basados en tecnología en el desarrollo regional: el caso del tecnopolo Futuroscope de Gran Poitiers

Un gran número de reconocidas ciudades en el mundo han llegado a niveles excepcionalesde desarrollo económico y social apalancadas por innovaciones de punta. Para laregión de Poitou-Charentes, en Francia, la presencia del parque de atracciones Futuroscopeen la ciudad de Poitiers se ha convertido en una importante atracción turística que actualmente propone una incógnita: ¿es esta infraestructura suficiente para considerar elGrand Technopole de Poitiers como un exitoso cluster de alta tecnología?Para conseguir las condiciones que permitan consolidar este cluster de alta tecnología, laregión debe tener la posibilidad de articular, gestionar y gobernar agresivas estrategias deinnovación.Con base en los resultados de un estudio sobre varias ciudades innovadoras de todo elmundo, se identificaron mecanismos básicos que permiten romper con los paradigmas convencionales del crecimiento, por medio de innovaciones revolucionarias que permitentener rendimientos de clase mundial, una marca de prestigio global y el estatus de polo éxitosode innovación tecnológica. Los resultados obtenidos muestran las características delos tecnopolos existentes, que deben de potencializarse para conseguir un posicionamiento de clase mundial para la región.