Data gathering approach in dense sensor networks

Sensor/actuator networks promised to extend automated monitoring and control into industrial processes. Avionic system is one of the prominent technologies that can highly gain from dense sensor/actuator deployments. An aircraft with smart sensing skin would fulfill the vision of affordability and environmental friendliness properties by reducing the fuel consumption. Achieving these properties is possible by providing an approximate representation of the air flow across the body of the aircraft and suppressing the detected aerodynamic drags. To the best of our knowledge, getting an accurate representation of the physical entity is one of the most significant challenges that still exists with dense sensor/actuator network. This paper offers an efficient way to acquire sensor readings from very large sensor/actuator network that are located in a small area (dense network). It presents LIA algorithm, a Linear Interpolation Algorithm that provides two important contributions. First, it demonstrates the effectiveness of employing a transformation matrix to mimic the environmental behavior. Second, it renders a smart solution for updating the previously defined matrix through a procedure called learning phase. Simulation results reveal that the average relative error in LIA algorithm can be reduced by as much as 60% by exploiting transformation matrix.

Acqusition and data analysis of the eco-efficiency for the establishment of indicators parameters for industrial environmental sustainability

The industrial activity is inevitably associated with a certain degradation of the environmental quality, because is not possible to guarantee that a manufacturing process can be totally innocuous. The eco-efficiency concept is globally accepted as a philosophy of entreprise management, that encourages the companies to become more competitive, innovative and environmentally responsible by promoting the link between its companies objectives for excellence and its objectives of environmental excellence issues. This link imposes the creation of an organizational methodology where the performance of the company is concordant with the sustainable development. The main propose of this project is to apply the concept of eco-efficiency to the particular case of the metallurgical and metal workshop industries through the development of the particular indicators needed and to produce a manual of procedures for implementation of the accurate solution.

A module for Data Centric Storage in ns-3

Demo in Workshop on ns-3 (WNS3 2015). 13 to 14, May, 2015. Castelldefels, Spain.

Introducing numerical analysis tools in engineering: a Scilab user case in electronics course

Software tools in education became popular since the widespread of personal computers. Engineering courses lead the way in this development and these tools became almost a standard. Engineering graduates are familiar with numerical analysis tools but also with simulators (e.g. electronic circuits), computer assisted design tools and others, depending on the degree. One of the main problems with these tools is when and how to start use them so that they can be beneficial to students and not mere substitutes for potentially difficult calculations or design. In this paper a software tool to be used by first year students in electronics/electricity courses is presented. The growing acknowledgement and acceptance of open source software lead to the choice of an open source software tool – Scilab, which is a numerical analysis tool – to develop a toolbox. The toolbox was developed to be used as standalone or integrated in an e-learning platform. The e-learning platform used was Moodle. The first approach was to assess the mathematical skills necessary to solve all the problems related to electronics and electricity courses. Analysing the existing circuit simulators software tools, it is clear that even though they are very helpful by showing the end result they are not so effective in the process of the students studying and self learning since they show results but not intermediate steps which are crucial in problems that involve derivatives or integrals. Also, they are not very effective in obtaining graphical results that could be used to elaborate reports and for an overall better comprehension of the results. The developed tool was based on the numerical analysis software Scilab and is a toolbox that gives their users the opportunity to obtain the end results of a circuit analysis but also the expressions obtained when derivative and integrals calculations, plot signals, obtain vector diagrams, etc. The toolbox runs entirely in the Moodle web platform and provides the same results as the standalone application. The students can use the toolbox through the web platform (in computers where they don't have installation privileges) or in their personal computers by installing both the Scilab software and the toolbox. This approach was designed for first year students from all engineering degrees that have electronics/electricity courses in their curricula.

Training and discovering corpus-based data driven exercices in english teaching (L2/FL) to native speakers of portuguese (L1)

Project submitted as part requirement for the degree of Masters in English teaching,

Effectiveness of primary angioplasty in the treatment of acute myocardial infarction. Analysis of in-hospital and late outcomes in 135 consecutive cases

OBJECTIVE: Evaluate early and late evolution of patients submitted to primary coronary angioplasty for acute myocardial infarction. METHODS: A prospective study of 135 patients with acute myocardial infarction submitted to primary transcutaneous coronary angioplasty (PTCA). Success was defined as TIMI 3 flow and residual lesion <50%. We performed statistical analyses by univariated, multivariated methods and survival analyze by Kaplan-Meier. RESULTS: PTCA success rate was 78% and early mortality 18,5%. Killip classes III and IV was associated to higher mortality, odds ratio 22.9 (95% CI: 5,7 to 91,8) and inversely related to age <75 years (OR = 0,93; 95% CI: 0.88 to 0.98). If we had chosen success flow as TIMI 2 and had excluded patients in Killip III/IV classes, success rate would be 86% and mortality 8%. The survival probability at the end or study, follow-up time 142 ± 114 days, was 80% and event free survival 35%. Greater survival was associated to stenting (OR = 0.09; 0.01 to 0.75) and univessel disease (OR = 0.21; 0.07 to 0.61). CONCLUSION: The success rate was lower and mortality was higher than randomized trials, however similar to that of non randomized studies. This demonstrated the efficacy of primary PTCA in our local conditions.

Influence of Jitter on Reliable Multicast Data Transmission Rate in Terms of CDN Networks

This paper devotes to evaluation of performance bottlenecks and algorithm deficiencies in the area of contemporary reliable multicast networking. Hereby, the impact of packet delay jitter on the end-to-end performance of multicast IP data transport is investigated. A series of tests with two most significant open-source implementations of reliable multicast is performed and analyzed. These are: UDP-based File Transfer Protocol (UFTP) and NACK-oriented Reliable multicast (NORM). Tests were targeted to simulate scenario of content distribution in WAN – sized Content Delivery Networks (CDN). Then, results were grouped and averaged, by round trip time and packet losses. This enabled us to see jitter influence independently on round trip time(RTT) and packet loss rates. Revealed jitter influence for different network conditions. Confirmed, that appearance of even small jitter causes significant data rate reduction.

Subclinical hypothyroidism and the risk of coronary heart disease and mortality: an individual participant data analysis from nine prospective cohort studies

Texte intégral: http://www.springerlink.com/content/3q68180337551r47/fulltext.pdf

Mechanisms of immune protection in the asexual blood stage infection by Plasmodium falciparum: analysis by in vitro and ex-vivo assays

Mechanisms of immune protection against the asexual blood stage infection by Plasmodium falciparum are reviewed. Recent studies of two independent lines of research developed at the Institute Pasteur, in humans and primate infections clearly indicate an obligatory interaction of antibodies and effector cells to express the anti-parasitic effect.

Role of disease activity for decision making ability in early multiple sclerosis

Background and purpose: Decision making (DM) has been defined as the process through which a person forms preferences, selects and executes actions, and evaluates the outcome related to a selected choice. This ability represents an important factor for adequate behaviour in everyday life. DM impairment in multiple sclerosis (MS) has been previously reported. The purpose of the present study was to assess DM in patients with MS at the earliest clinically detectable time point of the disease. Methods: Patients with definite (n=109) or possible (clinically isolated syndrome, CIS; n=56) MS, a short disease duration (mean 2.3 years) and a minor neurological disability (mean EDSS 1.8) were compared to 50 healthy controls aged 18 to 60 years (mean age 32.2) using the Iowa Gambling Task (IGT). Subjects had to select a card from any of 4 decks (A/B [disadvantageous]; C/D [advantageous]). The game consisted of 100 trials then grouped in blocks of 20 cards for data analysis. Skill in DM was assessed by means of a learning index (LI) defined as the difference between the averaged last three block indexes and first two block indexes (LI=[(BI-3+BI-4+BI-5)/3-(BI-1+B2)/2]). Non parametric tests were used for statistical analysis. Results: LI was higher in the control group (0.24, SD 0.44) than in the MS group (0.21, SD 0.38), however without reaching statistical significance (p=0.7). Interesting differences were detected when MS patients were grouped according to phenotype. A trend to a difference between MS subgroups and controls was observed for LI (p=0.06), which became significant between MS subgroups (p=0.03). CIS patients who confirmed MS diagnosis by presenting a second relapse after study entry showed a dysfunction in the IGT in comparison to the other CIS (p=0.01) and definite MS (p=0.04) patients. In the opposite, CIS patients characterised by not entirely fulfilled McDonald criteria at inclusion and absence of relapse during the study showed an normal learning pattern on the IGT. Finally, comparing MS patients who developed relapses after study entry, those who remained clinically stable and controls, we observed impaired performances only in relapsing patients in comparison to stable patients (p=0.008) and controls (p=0.03). Discussion: These results raise the assumption of a sustained role for both MS relapsing activity and disease heterogeneity (i.e. infra-clinical severity or activity of MS) in the impaired process of decision making.

Mixing compositions and other scales

Theory of compositional data analysis is often focused on the composition only. However in practical applications we often treat a composition together with covariableswith some other scale. This contribution systematically gathers and develop statistical tools for this situation. For instance, for the graphical display of the dependenceof a composition with a categorical variable, a colored set of ternary diagrams mightbe a good idea for a first look at the data, but it will fast hide important aspects ifthe composition has many parts, or it takes extreme values. On the other hand colored scatterplots of ilr components could not be very instructive for the analyst, if theconventional, black-box ilr is used.Thinking on terms of the Euclidean structure of the simplex, we suggest to set upappropriate projections, which on one side show the compositional geometry and on theother side are still comprehensible by a non-expert analyst, readable for all locations andscales of the data. This is e.g. done by defining special balance displays with carefully-selected axes. Following this idea, we need to systematically ask how to display, explore,describe, and test the relation to complementary or explanatory data of categorical, real,ratio or again compositional scales.This contribution shows that it is sufficient to use some basic concepts and very fewadvanced tools from multivariate statistics (principal covariances, multivariate linearmodels, trellis or parallel plots, etc.) to build appropriate procedures for all these combinations of scales. This has some fundamental implications in their software implementation, and how might they be taught to analysts not already experts in multivariateanalysis

Hilbert space on probability density functions with Aitchison geometry

Compositional data analysis motivated the introduction of a complete Euclidean structure in the simplex of D parts. This was based on the early work of J. Aitchison (1986) and completed recently when Aitchinson distance in the simplex was associated with an inner product and orthonormal bases were identified (Aitchison and others, 2002; Egozcue and others, 2003). A partition of the support of a random variable generates a composition by assigning the probability of each interval to a part of the composition. One can imagine that the partition can be refined and the probability density would represent a kind of continuous composition of probabilities in a simplex of infinitely many parts. This intuitive idea would lead to a Hilbert-space of probability densitiesby generalizing the Aitchison geometry for compositions in the simplex into the set probability densities

Compositional data and Simpson's paradox

Simpson's paradox, also known as amalgamation or aggregation paradox, appears whendealing with proportions. Proportions are by construction parts of a whole, which canbe interpreted as compositions assuming they only carry relative information. TheAitchison inner product space structure of the simplex, the sample space of compositions, explains the appearance of the paradox, given that amalgamation is a nonlinearoperation within that structure. Here we propose to use balances, which are specificelements of this structure, to analyse situations where the paradox might appear. Withthe proposed approach we obtain that the centre of the tables analysed is a naturalway to compare them, which avoids by construction the possibility of a paradox.Key words: Aitchison geometry, geometric mean, orthogonal projection

When zero doesn't mean it and other geomathematical mischief

There is almost not a case in exploration geology, where the studied data doesn’tincludes below detection limits and/or zero values, and since most of the geological dataresponds to lognormal distributions, these “zero data” represent a mathematicalchallenge for the interpretation.We need to start by recognizing that there are zero values in geology. For example theamount of quartz in a foyaite (nepheline syenite) is zero, since quartz cannot co-existswith nepheline. Another common essential zero is a North azimuth, however we canalways change that zero for the value of 360°. These are known as “Essential zeros”, butwhat can we do with “Rounded zeros” that are the result of below the detection limit ofthe equipment?Amalgamation, e.g. adding Na2O and K2O, as total alkalis is a solution, but sometimeswe need to differentiate between a sodic and a potassic alteration. Pre-classification intogroups requires a good knowledge of the distribution of the data and the geochemicalcharacteristics of the groups which is not always available. Considering the zero valuesequal to the limit of detection of the used equipment will generate spuriousdistributions, especially in ternary diagrams. Same situation will occur if we replace thezero values by a small amount using non-parametric or parametric techniques(imputation).The method that we are proposing takes into consideration the well known relationshipsbetween some elements. For example, in copper porphyry deposits, there is always agood direct correlation between the copper values and the molybdenum ones, but whilecopper will always be above the limit of detection, many of the molybdenum values willbe “rounded zeros”. So, we will take the lower quartile of the real molybdenum valuesand establish a regression equation with copper, and then we will estimate the“rounded” zero values of molybdenum by their corresponding copper values.The method could be applied to any type of data, provided we establish first theircorrelation dependency.One of the main advantages of this method is that we do not obtain a fixed value for the“rounded zeros”, but one that depends on the value of the other variable.Key words: compositional data analysis, treatment of zeros, essential zeros, roundedzeros, correlation dependency

Aitchison Geometry for Probability and Likelihood as a new approach to mathematical statistics

The Aitchison vector space structure for the simplex is generalized to a Hilbert space structure A2(P) for distributions and likelihoods on arbitrary spaces. Centralnotations of statistics, such as Information or Likelihood, can be identified in the algebraical structure of A2(P) and their corresponding notions in compositional data analysis, such as Aitchison distance or centered log ratio transform.In this way very elaborated aspects of mathematical statistics can be understoodeasily in the light of a simple vector space structure and of compositional data analysis. E.g. combination of statistical information such as Bayesian updating,combination of likelihood and robust M-estimation functions are simple additions/perturbations in A2(Pprior). Weighting observations corresponds to a weightedaddition of the corresponding evidence.Likelihood based statistics for general exponential families turns out to have aparticularly easy interpretation in terms of A2(P). Regular exponential families formfinite dimensional linear subspaces of A2(P) and they correspond to finite dimensionalsubspaces formed by their posterior in the dual information space A2(Pprior).The Aitchison norm can identified with mean Fisher information. The closing constant itself is identified with a generalization of the cummulant function and shown to be Kullback Leiblers directed information. Fisher information is the local geometry of the manifold induced by the A2(P) derivative of the Kullback Leibler information and the space A2(P) can therefore be seen as the tangential geometry of statistical inference at the distribution P.The discussion of A2(P) valued random variables, such as estimation functionsor likelihoods, give a further interpretation of Fisher information as the expected squared norm of evidence and a scale free understanding of unbiased reasoning