Towards the strategic adoption of Lean in aviation Maintenance Repair and Overhaul (MRO) industry:an empirical study into the industry's Lean status

Purpose - Despite many Maintenance Repair and Overhaul (MRO) organisations alluding their positive business performances to the adoption Lean initiatives, there is a paucity of direct literature that validates this assertion. Thus, the purpose of this paper is to study empirically via the use of an industry-wide survey to establish and extent of Lean adoption and to verify its suitability in mitigating prevalent MRO challenges. Design/methodology/approach - The empirical study contained in this paper is facilitated by an industry-wide survey to collect data from several firms across the MRO spectrum. The analysed responses from industry leaders, professionals and executives synthesised with existing literature was used in ascertaining the extent of Lean adoption within the operational framework of the industry. Findings - The empirical study helped in validating the suitability of Lean in MRO context. However, it was also observed that the focus of its application was skewed towards its production-orientated functions more than its service-orientated functions. Nonetheless, this paper presents results of the positive influence of Lean in MRO context. Research limitations/implications - This empirical study presented in this paper was carried out within a framework of key characteristics of operation. Although this approach is sufficient in assessing the industry's Lean status, further assessment can also be achieved within the context of relevant performance metrics which was not included in this paper. Practical implications - By exploring the industry's Lean status within the context of operational characteristics of operation, this study provides MRO practitioners with more awareness into some of the critical factors required for successful holistic Lean realisation. Social implications - The state-of-the-art of Lean within the aviation MRO context established through this research also contributes to the wider product-centric service environment by providing a platform that facilitates strategy development which ensures Lean success within this environment. Originality/value - Apart from validating the suitability of Lean in MRO contexts, by establishing the extent of Lean adoption within the context of the operational framework, this paper provides a clearer insight as to how successful Lean implementation can be achieved via a holistic implementation strategy balanced between the product-centric and service-centric aspects of the industry.

Liquid desiccant dehumidification and regeneration process to meet cooling and freshwater needs of desert greenhouses

Agriculture accounts for ~70% of freshwater usage worldwide. Seawater desalination alone cannot meet the growing needs for irrigation and food production, particularly in hot, desert environments. Greenhouse cultivation of high-value crops uses just a fraction of freshwater per unit of food produced when compared with open field cultivation. However, desert greenhouse producers face three main challenges: freshwater supply, plant nutrient supply, and cooling of the greenhouse. The common practice of evaporative cooling for greenhouses consumes large amounts of fresh water. In Saudi Arabia, the most common greenhouse cooling schemes are fresh water-based evaporative cooling, often using fossil groundwater or energy-intensive desalinated water, and traditional refrigeration-based direct expansion cooling, largely powered by the burning of fossil fuels. The coastal deserts have ambient conditions that are seasonally too humid to support adequate evaporative cooling, necessitating additional energy consumption in the dehumidification process of refrigeration-based cooling. This project evaluates the use of a combined-system liquid desiccant dehumidifier and membrane distillation unit that can meet the dual needs of cooling and freshwater supply for a greenhouse in a hot and humid environment.

Neuroprotection and regeneration of adult lesioned retinal ganglion cells by the modulation of fibroblast growth factor-2 and receptor tyrosine phosphatase-sigma

Thèse numérisée par la Direction des bibliothèques de l'Université de Montréal.

Wounds that heal and wounds that don't - The role of the IL-33/ST2 pathway in tissue repair and tumorigenesis

IL-33 is a member of the IL-1 family of cytokines. IL-33 is predominantly located within the nucleus of cells where it plays a role in gene regulation. Given the right combination of signals and cellular damage, stored IL-33 is released from the cell where it can interact with its receptor ST2, triggering danger-associated responses and act as a cellular "alarmin". Whilst IL-33/ST2 signalling has been shown to induce potent pro-inflammatory responses that can be detrimental in certain disease states, a dichotomous, protective role of IL-33 in promoting wound healing has also emerged in multiple tissues types. This review will explore the current literature concerning this homeostatic role of IL-33/ST2 in tissue repair and also review its role in uncontrolled wound responses as seen in both fibrosis and tumorigenesis.

Neuroprotection and regeneration of adult lesioned retinal ganglion cells by the modulation of fibroblast growth factor-2 and receptor tyrosine phosphatase-sigma

Thèse numérisée par la Direction des bibliothèques de l'Université de Montréal.

Regenerative Cues of Myeloid Cells on Pancreatic Epithelium

Thesis (Ph.D.)--University of Washington, 2016-07

Molecular cloning and expression of leptin in gray and harbor seal blubber, bone marrow, and lung and its potential role in marine mammal respiratory physiology

Leptin is a multifunctional hormone, produced predominantly in adipocytes. It regulates energy balance through its impact on appetite and fat metabolism, and its concentration indicates the size of body fat reserves. Leptin also plays a vital role in stretch-induced surfactant production during alveolar development in the fetus. The structure, expression pattern, and role of leptin have not previously been explored in marine mammals. Phocid seals undergo cyclical changes in body composition as a result of prolonged fasting and intensive foraging bouts and experience rapid, dramatic, and repeated changes in lung volume during diving. Here, we report the tissue-specific expression pattern of leptin in these animals. This is the first demonstration of leptin expression in the lung tissue of a mature mammal, in addition to its expression in the blubber and bone marrow, in common with other animals. We propose a role for leptin in seal pulmonary surfactant production, in addition to its likely role in long-term energy balance. We identify substitutions in the phocine leptin sequence in regions normally highly conserved between widely distinct vertebrate groups, and, using a purified seal leptin antiserum, we confirm the presence of the leptin protein in gray seal lung and serum fractions. Finally, we report the substantial inadequacies of using heterologous antibodies to measure leptin in unextracted gray seal serum.

Bone Mass and Bone Quality Are Altered by Hypoactivity in the Chicken

International audience

Physico-chemical characterization of metal-doped bone chars and their adsorption behavior for water defluoridation

New bone chars for fluoride adsorption from drinking water have been synthetized via metallic doping using aluminum and iron salts. A detailed statistical analysis of the metal doping process using the signal-to-noise ratios from Taguchi's experimental designs and its impact on the fluoride adsorption properties of modified bone chars have been performed. The best conditions, including the proper metallic salt, for metal doping were identified to improve the fluoride uptakes of modified bone chars. Results showed that the fluoride adsorption properties of bone chars can be enhanced up to 600% using aluminum sulfate for the surface modification. This aluminum-based adsorbent showed an adsorption capacity of 31 mg/g, which outperformed the fluoride uptakes reported for several adsorbents. Surface interactions involved in the defluoridation process were established using FTIR, DRX and XPS analysis. Defluoridation using the metal-doped bone chars occurred via an ion exchange process between fluoride ions and the hydroxyl groups on the adsorbent surface, whereas the Al(OH)xFy, FexFy, and CaF2 interactions could play also an important role in the removal process. These metal-doped adsorbents anticipate a promising behavior in water treatment, especially in developing countries where the efficiency – cost tradeoff is crucial for implementing new defluoridation technologies.

Biological significance of dead biomass retention trait in Mediterranean Basin species: an analysis between different successional niches and regeneration strategies as functional groups

Standing dead biomass retention is considered one of the most relevant fuel structural traits to affect plant flammability. However, very little is known about the biological significance of this trait and its distribution between different functional groups. Our aim was to analyse how the proportion of dead biomass produced in Mediterranean species is related to the successional niche of species (early-, mid- and late-successional stages) and the regeneration strategy of species (seeders and resprouters). We evaluated biomass distribution by size classes and standing dead biomass retention in nine dominant species from the Mediterranean Basin in different development stages (5, 9, 14 and 26 years since the last fire). The results revealed significant differences in the standing dead biomass retention of species that presented a distinct successional niche or regeneration strategy. These differences were restricted to the oldest ages studied (>9 years). Tree and small tree resprouters, typical in late-successional stages, presented slight variations with age and a less marked trend to retain dead biomass, while seeder shrubs and dwarf shrubs, characteristic of early-successional stages, showed high dead biomass loads. Our results suggest that the species that tend to retain more dead branches are colonising species that may promote fire in early-successional stages.

An examination of verbal descriptors of cancer-induced bone pain and neuropathic cancer pain

Aims: The aim of the thesis was to identify verbal descriptors of cancer induced bone pain (CIBP) and neuropathic cancer pain (NCP). An examination of the verbal descriptors associated with these two pain syndromes further considered the relationship between common verbal descriptors, cancer type, performance status and analgesia. Methods: The project was conducted in two phases; Phase one was a systematic review of the literature to examine current evidence of verbal descriptors in CIBP and NCP. Phase two utilised secondary data analysis methodology. Data from 120 patients with confirmed CIBP and 61 patients with confirmed NCP were deemed eligible for entry into a de novo database for secondary analysis. Key descriptive data were considered such as gender, ECOG and pain scores to characterise the patient population. Verbal descriptors of CIBP and NCP were considered in detail across the secondary de novo database. Results: Gender was not identified as a diagnostic characteristic of CIBP and NCP with similar distribution across prevalence of pain reporting and also pain severity. Patients with breast (n=52,43.3%), prostate (n=35,29.2%) and lung (n=14,11.7%) cancer were found to be at an increased risk of CIBP. Those with NCP more was found more commonly among patients with breast cancer (n=21,34.4%). Patients with CIBP were found to have an ECOG performance of 1 (n=49, 40.8%) or 2 (n=43, 35.8%) which was lower than those with NCP with an ECOG of 0 (n=32, 52.5%) or 2 (n=18, 29.5%). Comparisons were made across analgesia and treatment options for CIBP and NCP. Patients with CIBP received a greater variety of treatment options including bisphosphonates and radiotherapy while patients with NCP were more commonly treated with analgesia alone. Patients with CIBP and NCP were taking strong opioids, however those with NCP (n=45, 73.8%) were more likely to utilise strong opioids than those with CIBP (n=61, 50.8%). It was noted that those with NCP required a daily morphine equivalence of almost 50% higher than those with CIBP. Average consumption of opioids was 155.6mg, for patients with NCP, compared to 76mg in patients with CIBP. Common verbal descriptors of CIBP and NCP were identified. The most common verbal descriptors for CIBP were aching, gnawing and throbbing and the most common verbal descriptors of NCP were aching, tender and sharp. Of the most common 6 descriptors for CIBP and NCP only one descriptor was unique to each pain type, gnawing for CIBP and stabbing for NCP. Conclusions: Patients with CIBP and NCP use similar verbal descriptors to characterise their pain with gnawing being unique to CIBP and stabbing being unique to NCP in the data considered within project. Further research is required to explore verbal descriptors which are both common and unique to CIBP and NCP. Further exploration of verbal descriptors would assist development of a comprehensive pain assessment tool which would enhance pain assessment for nurses, clinicians and patients.