Projecto de parceria entre a ONGD Estímulo e a Rede de Farmácias Portuguesas: a união de esforços entre sectores para a resolução de problemas contemporâneos

Trabalho de projeto apresentado à Escola Superior de Comunicação Social como parte dos requisitos para obtenção de grau de mestre em Gestão Estratégica das Relações Públicas.

Simple laccase-based biosensor for formetanate hydrochloride quantification in fruits

This work describes the development of an electrochemical enzymatic biosensor for quantification of the pesticide formetanate hydrochloride (FMT). It is based on a gold electrode modified with electrodeposited gold nanoparticles and laccase. The principle behind its development relies on FMT's capacity to inhibit the laccase catalytic reaction that occurs in the presence of phenolic substrates. The optimum values for the relevant experimental variables such as gold nanoparticles electrochemical deposition (at − 0.2 V for 100 s), laccase immobilization (via glutaraldehyde cross-linking), laccase concentration (12.4 mg/mL), substrate selection and concentration (5.83×10−5 M of aminophenol), pH (5.0), buffer (Britton–Robinson), and square-wave voltammetric parameters were determined. The developed biosensor was successfully applied to FMT determination in mango and grapes. The attained limit of detection was 9.5×10−8 ± 9.5×10−10 M (0.02 ± 2.6×10−4 mg/kg on a fresh fruit weight basis). Recoveries for the five tested spiking levels ranged from 95.5 ± 2.9 (grapes) to 108.6 ± 2.5% (mango). The results indicated that the proposed device presents suitable characteristics in terms of sensitivity (20.58 ± 0.49 A/μM), linearity (9.43×10−7 to 1.13×10−5 M), accuracy, repeatability (RSD of 1.4%), reproducibility (RSD of 1.8%) and stability (19 days) for testing of compliance with established maximum residue limits of FMT in fruits and vegetables.

Inferência de percursos dos utentes de um transporte coletivo

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia de Redes de Comunicações e Multimédia

O futuro da liderança de topo na administração pública portuguesa. Forças motrizes e cenários possíveis.

Dissertação de mestrado em Administração Pública, orientada pelo Professor Doutor J. A. Oliveira Rocha apresentada na Escola de Economia e Gestão da Universidade do Minho, em 2006.

On the requirements of interpolating polynomials for path motion constraints

In the framework of multibody dynamics, the path motion constraint enforces that a body follows a predefined curve being its rotations with respect to the curve moving frame also prescribed. The kinematic constraint formulation requires the evaluation of the fourth derivative of the curve with respect to its arc length. Regardless of the fact that higher order polynomials lead to unwanted curve oscillations, at least a fifth order polynomials is required to formulate this constraint. From the point of view of geometric control lower order polynomials are preferred. This work shows that for multibody dynamic formulations with dependent coordinates the use of cubic polynomials is possible, being the dynamic response similar to that obtained with higher order polynomials. The stabilization of the equations of motion, always required to control the constraint violations during long analysis periods due to the inherent numerical errors of the integration process, is enough to correct the error introduced by using a lower order polynomial interpolation and thus forfeiting the analytical requirement for higher order polynomials.

Genomic and transcriptomic features of Chlamydia trachomatis. Tracking the basis for the ecological success

Dissertation presented to obtain a Ph.D degree in Biology, speciality in Molecular Genetics, by Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia

Natural and amyloid self-assembly of S100 proteins: structural basis of functional diversity

The S100 proteins are 10-12 kDa EF-hand proteins that act as central regulators in a multitude of cellular processes including cell survival, proliferation, differentiation and motility. Consequently, many S100 proteins are implicated and display marked changes in their expression levels in many types of cancer, neurodegenerative disorders, inflammatory and autoimmune diseases. The structure and function of S100 proteins are modulated by metal ions via Ca2+ binding through EF-hand motifs and binding of Zn2+ and Cu2+ at additional sites, usually at the homodimer interfaces. Ca2+ binding modulates S100 conformational opening and thus promotes and affects the interaction with p53, the receptor for advanced glycation endproducts and Toll-like receptor 4, among many others. Structural plasticity also occurs at the quaternary level, where several S100 proteins self-assemble into multiple oligomeric states, many being functionally relevant. Recently, we have found that the S100A8/A9 proteins are involved in amyloidogenic processes in corpora amylacea of prostate cancer patients, and undergo metal-mediated amyloid oligomerization and fibrillation in vitro. Here we review the unique chemical and structural properties of S100 proteins that underlie the conformational changes resulting in their oligomerization upon metal ion binding and ultimately in functional control. The possibility that S100 proteins have intrinsic amyloid-forming capacity is also addressed, as well as the hypothesis that amyloid self-assemblies may, under particular physiological conditions, affect the S100 functions within the cellular milieu.

Candidin: comparison of two antigens for cutaneous delayed hypersensitivity testing

A candidin, which is a suspension of killed yeast cells, is commonly used for intradermal tests of delayed hypersensitivity, to evaluate the immunological cellular competence of the patient, when the test is applied along with other similar tests. When working with a cellular antigen, the histopathology of positive skin tests reveals a cellular infiltrate which not only presents a characteristic hypersensitivity reaction but also a neutrophilic abscess in the central part. This research presents the results of a comparison between the yeast cell suspension and the polysaccharide antigens, both obtained from the same strains of Candida albicans. The results obtained by skin tests in one hundred individuals were 61.0% with the polysaccharide antigen and 69.0% with the yeast cell suspension antigen. Concordant results concerning the two antigens were observed in 82.0% of the individuals. The discussion section presents an assumption to explain the differences of positivity obtained with the two antigens. We conclude that the polysaccharide antigen can be utilized in the intradermal test of delayed hypersensitivity to Candida albicans.

In vitro susceptibility testing of Fonsecaea pedrosoi to antifungals

Based on the difficulties experienced in the treatment of chromoblastomycosis, 12 primary human isolates of F. pedrosoi, were tested for their in vitro susceptibility to various antimycotics. We adapted the recommendations of the NCCLS for yeasts and followed the indications for mold testing from other authors in order to determine their MIC’s and the MLC’s. It was found that a significant proportion of the isolates were resistant to 3 of the 4 antimycotics tested, as revealed by high MIC values, as follows: 33% were resistant to amphotericin B (AMB), 58.3% to 5 fluocytosine (5 FC) and 66.7% to fluconazole (FLU). Contrarywise, none of the isolates proved resistant to itraconazole (ITZ). Determination of the MLC’s revealed that a larger proportion of the isolates were not killed by AMB, 5 FC (91.7%), FLU (100%) or even, ITZ (41.7%). These data indicate that it would be desirable to determine the susceptibility of F. pedrosoi before initiating therapy, in order to choose the more effective antifungal and avoid clinical failure

Solar Intensity Forecasting using Artificial Neural Networks and Support Vector Machines

This paper presents several forecasting methodologies based on the application of Artificial Neural Networks (ANN) and Support Vector Machines (SVM), directed to the prediction of the solar radiance intensity. The methodologies differ from each other by using different information in the training of the methods, i.e, different environmental complementary fields such as the wind speed, temperature, and humidity. Additionally, different ways of considering the data series information have been considered. Sensitivity testing has been performed on all methodologies in order to achieve the best parameterizations for the proposed approaches. Results show that the SVM approach using the exponential Radial Basis Function (eRBF) is capable of achieving the best forecasting results, and in half execution time of the ANN based approaches.

Projeto e dimensionamento da tampa de ventilação de um motor elétrico

Nos dias de hoje a indústria tenta tornar-se cada vez mais competitiva baixando os custos de produção e aumentando a eficiência do produto. O presente trabalho visa desenvolver uma tampa de ventilação de um motor elétrico mais competitiva mas que cumpra com o desempenho mecânico e eficiência solicitados. Para tal, começou-se por analisar alguns motores elétricos e as suas aplicações. Seguidamente apresentam-se conceitos sobre aerodinâmica e processos de fabrico que permitem apoiar as opções tomadas ao longo do estudo. Após o fundamento teórico é apresentado todo o processo de desenvolvimento de uma nova peça. Recorrendo a softwares como o solidworks e Ansys, realizou-se uma análise analítica que permitiu validar as alterações propostas na tampa de ventilação. Foram, ainda, realizadas análises experimentais com o intuito de consolidar os resultados obtidos analiticamente e garantir que o componente cumpria os requisitos impostos por organizações internacionais ligadas à indústria do oil and gas. A primeira das análises experimentais realizada testa a capacidade do material resistir ao impacto de componentes de pequenas dimensões. Esta analise permitiu garantir a utilização da tampa de ventilação em todas as áreas sem limites de normalização. A segunda permite analisar experimentalmente as alterações de design assim como testar alguns trabalhos futuros. Esta análise permitiu definir se no novo projeto da tampa desenvolvido deveria comtemplar uma alteração do diâmetro da entrada de ar da tampa de ventilação. Como resultados aparecem as decisões tomadas na presente tese, assim como analisar as metas que foram atingidas e que melhorias se pretende atingir de futuro tentando visar novas metas. Os resultados obtidos permitiram definir uma nova tampa de ventilação com a nova que irá beneficiar a empresa na sua competitividade no mercado mantendo a performance do motor.

Massive shift in the pneumococcal nasopharyngeal flora after the 7-valent conjugate vaccine: epidemiological studies and testing pathogenic potential in animal models

Dissertation presented to obtain the PhD degree in Biology/Molecular Biology by Universidade Nova de Lisboa, Instituto de Tecnologia Química e Biológica

Vibroacoustic disease II: The biological and acoustical basis of low frequency noise induced pathology

Proceedings Institute of Acoustics (UK); vol. 25, nº2, p. 72-78.

O financiamento por capitação ajustada pelo risco em contexto de integração vertical de cuidados de saúde : a utilização dos consumos com medicamentos como proxy da carga de doença em ambulatório

RESUMO - Introdução - Com o presente projecto de investigação pretendeu-se estudar o financiamento por capitação ajustado pelo risco em contexto de integração vertical de cuidados de saúde, recorrendo particularmente a informação sobre o consumo de medicamentos em ambulatório como proxy da carga de doença. No nosso país, factores como a expansão de estruturas de oferta verticalmente integradas, inadequação histórica da sua forma de pagamento e a recente possibilidade de dispor de informação sobre o consumo de medicamentos de ambulatório em bases de dados informatizadas são três fortes motivos para o desenvolvimento de conhecimento associado a esta temática. Metodologia - Este trabalho compreende duas fases principais: i) a adaptação e aplicação de um modelo de consumo de medicamentos que permite estimar a carga de doença em ambulatório (designado de PRx). Nesta fase foi necessário realizar um trabalho de selecção, estruturação e classificação do modelo. A sua aplicação envolveu a utilização de bases de dados informatizadas de consumos com medicamentos nos anos de 2007 e 2008 para a região de Saúde do Alentejo; ii) na segunda fase foram simulados três modelos de financiamento alternativos que foram propostos para financiar as ULS em Portugal. Particularmente foram analisadas as dimensões e variáveis de ajustamento pelo risco (índices de mortalidade, morbilidade e custos per capita), sua ponderação relativa e consequente impacto financeiro. Resultados - Com o desenvolvimento do modelo PRx estima-se que 36% dos residentes na região Alentejo têm pelo menos uma doença crónica, sendo a capacidade de estimação do modelo no que respeita aos consumos de medicamentos na ordem dos 0,45 (R2). Este modelo revelou constituir uma alternativa a fontes de informação tradicionais como são os casos de outros estudos internacionais ou o Inquérito Nacional de Saúde. A consideração dos valores do PRx para efeitos de financiamento per capita introduz alterações face a outros modelos propostos neste âmbito. Após a análise dos montantes de financiamento entre os cenários alternativos, obtendo os modelos 1 e 2 níveis de concordância por percentil mais próximos entre si comparativamente ao modelo 3, seleccionou-se o modelo 1 como o mais adequado para a nossa realidade. Conclusão - A aplicação do modelo PRx numa região de saúde permitiu concluir em função dos resultados alcançados, que já existe a possibilidade de estruturação e operacionalização de um modelo que permite estimar a carga de doença em ambulatório a partir de informação relativa ao seu perfil de consumo de medicamentos dos utentes. A utilização desta informação para efeitos de financiamento de organizações de saúde verticalmente integradas provoca uma variação no seu actual nível de financiamento. Entendendo este estudo como um ponto de partida onde apenas uma parte da presente temática ficará definida, outras questões estruturantes do actual sistema de financiamento não deverão também ser olvidadas neste contexto. ------- ABSTRACT - Introduction - The main goal of this study was the development of a risk adjustment model for financing integrated delivery systems (IDS) in Portugal. The recent improvement of patient records, mainly at primary care level, the historical inadequacy of payment models and the increasing number of IDS were three important factors that drove us to develop new approaches for risk adjustment in our country. Methods - The work was divided in two steps: the development of a pharmacy-based model in Portugal and the proposal of a risk adjustment model for financing IDS. In the first step an expert panel was specially formed to classify more than 33.000 codes included in Portuguese pharmacy national codes into 33 chronic conditions. The study included population of Alentejo Region in Portugal (N=441.550 patients) during 2007 and 2008. Using pharmacy data extracted from three databases: prescription, private pharmacies and hospital ambulatory pharmacies we estimated a regression model including Potential Years of Life Lost, Complexity, Severity and PRx information as dependent variables to assess total cost as the independent variable. This healthcare financing model was compared with other two models proposed for IDS. Results - The more prevalent chronic conditions are cardiovascular (34%), psychiatric disorders (10%) and diabetes (10%). These results are also consistent with the National Health Survey. Apparently the model presents some limitations in identifying patients with rheumatic conditions, since it underestimates prevalence and future drug expenditure. We obtained a R2 value of 0,45, which constitutes a good value comparing with the state of the art. After testing three scenarios we propose a model for financing IDS in Portugal. Conclusion - Drug information is a good alternative to diagnosis in determining morbidity level in a population basis through ambulatory care data. This model offers potential benefits to estimate chronic conditions and future drug costs in the Portuguese healthcare system. This information could be important to resource allocation decision process, especially concerning risk adjustment and healthcare financing.

Evaluation of Etest and macrodilution broth method for antifungal susceptibility testing of Candida sp strains isolated from oral cavities of AIDS patients

A comparison of the Etest and the reference broth macrodilution susceptibility test for fluconazole, ketoconazole, itraconazole and amphotericin B was performed with 59 of Candida species isolated from the oral cavities of AIDS patients. The Etest method was performed according to the manufacturer's instructions, and the reference method was performed according to National Committee for Clinical Laboratory Standards document M27-A guidelines. Our data showed that there was a good correlation between the MICs obtained by the Etest and broth dilution methods. When only the MIC results at ± 2 dilutions for both methods were considered, the agreement rates were 90.4% for itraconazole, ketoconazole and amphotericin B and 84.6% for fluconazole of the C. albicans tested. In contrast, to the reference method, the Etest method classified as susceptible three fluconazole-resistant isolates and one itraconazole-resistant isolate, representing four very major errors. These results indicate that Etest could be considered useful for antifungal sensitivity evaluation of yeasts in clinical laboratories.