999 resultados para Analyse de correspondance multiple
Resumo:
INTRODUCTION: Human herpesviruses are frequently associated with orofacial diseases in humans (HSV-1, EBV, CMV and HHV-8), some can also cause systemic disease (CMV and HHV-8). The transmission of these viruses occurs by contact with infected secretions, especially saliva. Human immunodeficiency virus infection is associated with an increased risk of HHVs and related diseases. METHODS: This work aimed to detect HSV-1, EBV, CMV and HHV-8 DNA in saliva of HIV-infected patients from Teresina, northeast Brazil, by PCR and compare these findings with age and sex matched HIV-seronegative individuals. RESULTS: No difference in prevalence was verified between HHV detection in the saliva of HIV-seropositive individuals and controls. The individual frequencies of these viruses in these two populations were different. HIV seropositivity correlated positively with the presence of CMV (OR: 18.2, p= 0.00032) and EBV (OR: 3.44, p= 0.0081). No association between CD4 counts and the prevalence of HHVs in the saliva was observed; however, a strong association was determined between seropositivity and the presence of multiple HHV DNAs in saliva (OR: 4.83, p = 0.0028). CONCLUSIONS: These findings suggest the asymptomatic salivary shedding of HHVs is a common event between HIV-seropositive and seronegative individuals from Teresina, Piauí, Brazil, and, especially for HIV-seropositive patients, saliva is a risk factor for the acquisition/transmission of multiple HHVs.
Resumo:
Stratigraphic Columns (SC) are the most useful and common ways to represent the eld descriptions (e.g., grain size, thickness of rock packages, and fossil and lithological components) of rock sequences and well logs. In these representations the width of SC vary according to the grain size (i.e., the wider the strata, the coarser the rocks (Miall 1990; Tucker 2011)), and the thickness of each layer is represented at the vertical axis of the diagram. Typically these representations are drawn 'manually' using vector graphic editors (e.g., Adobe Illustrator®, CorelDRAW®, Inskape). Nowadays there are various software which automatically plot SCs, but there are not versatile open-source tools and it is very di cult to both store and analyse stratigraphic information. This document presents Stratigraphic Data Analysis in R (SDAR), an analytical package1 designed for both plotting and facilitate the analysis of Stratigraphic Data in R (R Core Team 2014). SDAR, uses simple stratigraphic data and takes advantage of the exible plotting tools available in R to produce detailed SCs. The main bene ts of SDAR are: (i) used to generate accurate and complete SC plot including multiple features (e.g., sedimentary structures, samples, fossil content, color, structural data, contacts between beds), (ii) developed in a free software environment for statistical computing and graphics, (iii) run on a wide variety of platforms (i.e., UNIX, Windows, and MacOS), (iv) both plotting and analysing functions can be executed directly on R's command-line interface (CLI), consequently this feature enables users to integrate SDAR's functions with several others add-on packages available for R from The Comprehensive R Archive Network (CRAN).
Resumo:
We describe the case of a 41-year-old man with congenital heart disease and infective endocarditis (IE), who presented multiple vegetations attached to the pulmonary, mitral, and aortic valves. Three valve replacements were performed, but the patient developed an abscess at the mitral-aortic intervalvular fibrosa and died due to sepsis. We briefly discuss the indications for surgery in IE, emphasizing its role in the treatment of uncontrolled infection.
Resumo:
INTRODUCTION: Chagas' disease is a major public health problem in Brazil and needs extensive and reliable information to support consistent prevention and control actions. This study describes the most common causes of death associated with deaths related to Chagas' disease (underlying or associated cause of death). METHODS: Mortality data were obtained from the Mortality Information System of the Ministry of Health (approximately 9 million deaths). We analyzed all deaths that occurred in Brazil between 1999 and 2007, where Chagas' disease was mentioned on the death certificate as underlying or associated cause (multiple causes of death). RESULTS: There was a total of 53,930 deaths related to Chagas' disease, 44,543 (82.6%) as underlying cause and 9,387 (17.4%) as associated cause. The main diseases and conditions associated with death by Chagas' disease as underlying cause included direct complications of cardiac involvement, such as conduction disorders/arrhythmias (41.4%) and heart failure (37.7%). Cerebrovascular disease (13.2%), ischemic heart disease (13.2%) and hypertensive diseases (9.3%) were the main underlying causes of deaths in which Chagas' disease was identified as an associated cause. CONCLUSIONS: Cardiovascular diseases were often associated with deaths related to Chagas' disease. Information from multiple causes of death recorded on death certificates allows reconstruction of the natural history of Chagas' disease and suggests preventive and therapeutic potential measures more adequate and specifics.
Resumo:
RESUMO: Introdução e objetivos: Não existia um estudo multicêntrico que descrevesse as características dos doentes com EM, da doença em si, ou do seu tratamento, em Portugal.Métodos: Doentes McDonald 2010 positivos foram sequencialmente recrutados em 7 centros entre Maio e Novembro 2014. Aplicou-se um Caderno de Recolha de Dados incidindo na demografia, doença, educação e emprego (estudo PORT-MS). Resultados: 561 doentes incluídos. Primeiros sintomas aos 30,2±10,5 anos (RRMS 29,2±10, PPMS 39,4±11,7, p<0,001); diagnóstico 3,2±5,3 anos depois (RRMS 3,0±5,1, PPMS 4,9±2,5, p=0,002); tempo de doença após diagnóstico 9,4±7,2 anos (semelhante RRMS no diagnóstico e PPMS); idade atual 42,9±12,4 anos (grupo RRMS no diagnóstico 42,0±12,1, PPMS 52,5±11,3, p<0,001); EDSS atual 2,5 (RRMS 2.0, PPMS 6.0); proporção feminino:masculino é 2,5:1 (RRMS semelhante, PPMS 1,1:1, p<0,05); no diagnóstico RRMS 90,6%, SPMS 0,9%, PPMS 8,6%; 9,5% dos RRMS encontravam-se em SP na inclusão (nomeadamente os com mais idade no diagnóstico e/ou atualidade ou tempo de doença mais prolongado). PPMS mais frequente em doentes diagnosticados mais tardiamente (p<0,001), onde aumenta também ligeiramente a proporção de mulheres na PPMS. Nas últimas décadas: novos casos mostram estabilidade na proporção de géneros e tipos de doença; idade nos primeiros sintomas e no diagnóstico aumentou ligeiramente, tempo entre eles diminuiu ligeiramente. Proporção sob DMT (Maio 2014): global 84,5%; atualmente RRMS 90,4%; SPMS 70,8%; PPMS 36,8%; progressivas agregadas 48%. Tipo de DMT, amostra global: interferões 56,5%, GA 18,4%, Natalizumab 11,6%, Fingolimod 9,7%. Global: economicamente ativos 61,5%, desemprego 13,5%, 74,1% dos não activos estão reformados por doença. Gravidezes após diagnóstico em 15% mulheres. Casos com história familiar positiva 7,8%. Discussão e conclusões: Incluída cerca de 10% da população portuguesa. Resultados congruentes com dados internacionais. Elevada proporção sob DMT, mesmo EDSS alto e formas progressivas. Terapêuticas de segunda linha sub representadas. Doentes jovens e com doença ligeira com vida económica ativa; restantes essencialmente reformados por doença.---------------- ABSTRACT : Background/aims: In Portugal, there wasn’t a multicentric study on the general characteristics (demography, disease milestones, DMT, socioeconomic status) of Multiple Sclerosis patients. Methods: Patients fulfilling McDonald 2010 criteria were sequentially recruited from May to November 2014 in 7 centers and data was systematically collected. Results: 561 patients included. First symptoms occurred at 30,2±10,5 years-old (RRMS 29,2±10, PPMS 39,4±11,7, p<0,001); diagnosis 3,2±5,3 years later (RRMS 3,0±5,1, PPMS 4,9±2,5, p=0,002); 9,4±7,2 years elapsed since diagnosis (similar for those is RRMS at diagnosis and PPMS); current age 42,9±12,4 years-old (group RRMS at diagnosis 42,0±12,1, PPMS 52,5±11,3, p<0,001); current EDSS 2,5 (RRMS 2.0, PPMS 6.0); females to males 2,5:1 (RRMS similar, PPMS 1,1:1, p<0,05); at diagnosis RRMS 90,6%, SPMS 0,9%, PPMS 8,6%; 9,5% of RRMS reached SP at inclusion (those older at diagnosis, in actuality, or with longer follow-up). PPMS more frequente in patients diagnosed at older ages (p<0,001), also slight increase in females. Along the last decades: new cases have showed stable proportions of gender and disease types; age at first symptoms and diagnosis slightly increased, time between them slightly decreased. Proportion on DMT (May 2014): 84,5% of all; 90,4% of currently in RRMS; 70,8% of SPMS; 36,8% of PPMS; 48% of progressive forms together. Type of DMT, all patients: interferons 56,5%, Glatiramer Acetate 18,4%, Natalizumab 11,6%, Fingolimod 9,7%. Economically active 61,5% of all, unemployment 13,5%, 74,1% of non-active are retired due to disease. Females pregnant after diagnosis 15%. Positive family cases in 7,8%. Discussion/Conclusions: 10% of the national MS population collected. Data generally consistente with international reports. Proportion under DMT relatively high in all disease types, but second line therapies underrepresented. Young patients with mild disease have an active economic life. Those not active are essentially retired due to disease.
Resumo:
Abstract: INTRODUCTION: Few studies have described the risk factors of intestinal parasitic infections in the Amazon. METHODS: A cross-sectional survey was performed in a City of the State of Amazonas (Brazil) to estimate the prevalence of intestinal parasites and determine the risk factors for helminth infections. RESULTS: Ascaris lumbricoides was the most prevalent parasite. The main risk factors determined were: not having a latrine for A. lumbricoides infection; being male and having earth or wood floors for hookworm infection; and being male for multiple helminth infections. CONCLUSIONS: We reported a high prevalence of intestinal parasites and determined some poverty-related risk factors.
Resumo:
Prostate cancer (PCa) is the most common form of cancer in men, in Europe (World Health Organization data). The most recent statistics, in Portuguese territory, confirm this scenario, which states that about 50% of Portuguese men may suffer from prostate cancer and 15% of these will die from this condition. Its early detection is therefore fundamental. This is currently being done by Prostate Specific Antigen (PSA) screening in urine but false positive and negative results are quite often obtained and many patients are sent to unnecessary biopsy procedures. This early detection protocol may be improved, by the development of point-of-care cancer detection devices, not only to PSA but also to other biomarkers recently identified. Thus, the present work aims to screen several biomarkers in cultured human prostate cell lines, serum and urine samples, developing low cost sensors based on new synthetic biomaterials. Biomarkers considered in this study are the following: prostate specific antigen (PSA), annexin A3 (ANXA3), microseminoprotein-beta (MSMB) and sarcosine (SAR). The biomarker recognition may occurs by means of molecularly imprinted polymers (MIP), which are a kind of plastic antibodies, and enzymatic approaches. The growth of a rigid polymer, chemically stable, using the biomarker as a template allows the synthesis of the plastic antibody. MIPs show high sensitivity/selectivity and present much longer stability and much lower price than natural antibodies. This nanostructured material was prepared on a carbon solid. The interaction between the biomarker and the sensing-material produces electrical signals generating quantitative or semi-quantitative data. These devices allow inexpensive and portable detection in point-of-care testing.
Resumo:
This thesis proposes a methodology for modelling business interoperability in a context of cooperative industrial networks. The purpose is to develop a methodology that enables the design of cooperative industrial network platforms that are able to deliver business interoperability and the analysis of its impact on the performance of these platforms. To achieve the proposed objective, two modelling tools have been employed: the Axiomatic Design Theory for the design of interoperable platforms; and Agent-Based Simulation for the analysis of the impact of business interoperability. The sequence of the application of the two modelling tools depends on the scenario under analysis, i.e. whether the cooperative industrial network platform exists or not. If the cooperative industrial network platform does not exist, the methodology suggests first the application of the Axiomatic Design Theory to design different configurations of interoperable cooperative industrial network platforms, and then the use of Agent-Based Simulation to analyse or predict the business interoperability and operational performance of the designed configurations. Otherwise, one should start by analysing the performance of the existing platform and based on the achieved results, decide whether it is necessary to redesign it or not. If the redesign is needed, simulation is once again used to predict the performance of the redesigned platform. To explain how those two modelling tools can be applied in practice, a theoretical modelling framework, a theoretical Axiomatic Design model and a theoretical Agent-Based Simulation model are proposed. To demonstrate the applicability of the proposed methodology and/or to validate the proposed theoretical models, a case study regarding a Portuguese Reverse Logistics cooperative network (Valorpneu network) and a case study regarding a Portuguese construction project (Dam Baixo Sabor network) are presented. The findings of the application of the proposed methodology to these two case studies suggest that indeed the Axiomatic Design Theory can effectively contribute in the design of interoperable cooperative industrial network platforms and that Agent-Based Simulation provides an effective set of tools for analysing the impact of business interoperability on the performance of those platforms. However, these conclusions cannot be generalised as only two case studies have been carried out. In terms of relevance to theory, this is the first time that the network effect is addressed in the analysis of the impact of business interoperability on the performance of networked companies and also the first time that a holistic approach is proposed to design interoperable cooperative industrial network platforms. Regarding the practical implications, the proposed methodology is intended to provide industrial managers a management tool that can guide them easily, and in practical and systematic way, in the design of configurations of interoperable cooperative industrial network platforms and/or in the analysis of the impact of business interoperability on the performance of their companies and the networks where their companies operate.
Resumo:
Outrora dominado por ameaças provenientes de Estados-nação, o cenário global actual, dominado por uma rápida mudança de poderes que nos apresenta uma interacção complexa entre múltiplos actores, onde inimigos desconhecidos, anteriormente bem identificados, é actualmente controlado por grupos terroristas bem preparados e bem organizados. Hezbollah é reconhecido como um dos grupos terroristas mais capazes, com uma extensa rede fora do Líbano dedicada a tráfico de droga, armas e seres humanos, tal como o branqueamento de capitais para financiar o terrorismo, representando um grande foco de instabilidade à segurança. Como instrumento de Estado, os serviços de informações detêm a capacidade de estar na linha da frente na prevenção e combate ao terrorismo. Todavia, para compreender este fenómeno é necessário analisar os actores desta ameaça. À luz desta conjuntura, esta dissertação está dividida em três capítulos principais que visam responder às seguintes questões fundamentais: O que é o terrorismo? Como opera um grupo terrorista transnacional? Será que os serviços de informações têm as ferramentas necessárias para prevenir e combater estas ameaças?
Resumo:
Glucocorticoids are widely used in the treatment of lupus patients, and adverse effects, which include osteoporosis and associated fractures, are frequent. Treatment of osteoporosis of young patients should be effective and not harmful to bone growth and remodeling. Bisphosphonates are drugs that decrease the incidence of bone fractures, but their use in juvenile patients is still controversial because of their possible side effects on the growing skeleton. However, recently published studies showed that linear growth continued normally after treatment with these drugs, and there was no excessive suppression of bone remodeling or mineralization defects. Zoledronic acid is a new intravenous bisphosphonate that has been approved by the US FDA for use with hypercalcemia of malignancies and might be an effective treatment for postmenopausal osteoporosis. The authors report a case of a young girl with systemic lupus who developed multiple vertebral collapses due to glucocorticoid therapy, and zoledronic acid was used producing significant clinical and densitometric improvement.
Resumo:
Fundação para a Ciência e a Tecnologia (FCT), Fundação Millennium bcp
Resumo:
This present study aimed to investigate the fatigue life of unused (new) endodontic instruments made of NiTi with control memory by Coltene™ and subjected to the multi curvature of a mandibular first molar root canal. Additionally, the instrument‟s structural behaviour was analysed through non-linear finite element analysis (FEA). The fatigue life of twelve Hyflex™ CM files was assessed while were forced to adopt a stance with multiple radius of curvature, similar to the ones usually found in a mandibular first molar root canal; nine of them were subjected to Pecking motion, a relative movement of axial type. To achieve this, it was designed an experimental setup with the aim of timing the instruments until fracture while worked inside a stainless steel mandibular first molar model with relative axial motion to simulate the pecking motion. Additionally, the model‟s root canal multi-curvature was confirmed by radiography. The non-linear finite element analysis was conducted using the computer aided design software package SolidWorks™ Simulation, in order to define the imposed displacement required by the FEA, it was necessary to model an endodontic instrument with simplified geometry using SolidWorks™ and subsequently analyse the geometry of the root canal CAD model. The experimental results shown that the instruments subjected to pecking motion displayed higher fatigue life values and higher lengths of fractured tips than those with only rotational relative movement. The finite element non-linear analyses shown, for identical conditions, maximum values for the first principal stress lower than the yield strength of the material and those were located in similar positions to the instrument‟s fracture location determined by the experimental testing results.
Resumo:
Dissertação de mestrado em Educação Especial (área de especialização Intervenção Precoce)
Resumo:
Tese de Doutoramento em Geografia - Geografia Humana