Influence of Taurine on Cardiac Remodeling Induced by Tobacco Smoke Exposure

Background/Aims: To investigate the effect of taurine on cardiac remodeling induced by smoking. Methods: In the first step, rats were allocated into two groups: Group C (n=14): control; Group T (n=14): treated with taurine (3% in drinking water), for three months. In the second step, rats were allocated into two groups: Group ETS (n=9): rats exposed to tobacco smoke; Group ETS-T (n=9): rats exposed to tobacco smoke and treated with taurine for two months. Results: After three months, taurine presented no effects on morphological or functional variables of normal rats assessed by echocardiogram. on the other hand, after two months, ETS-T group presented higher LV wall thickness (ETS=1.30 (1.20-1.42); ETS-T=1.50 (1.40-1.50); p=0.029), E/A ratio (ETS=1.13 +/- 0.13; ETS-T=1.37 +/- 0.26; p=0.028), and isovolumetric relaxation time normalized for heart rate (ETS=53.9 +/- 4.33; ETS-T=72.5 +/- 12.0; p<0.001). The cardiac activity of the lactate dehydrogenase was higher in the ETS-T group (ETS=204 +/- 14 nmol/mg protein; ETS-T=232 +/- 12 nmol/mg protein; p<0.001). ETS-T group presented lower levels of phospholamban (ETS=1.00 +/- 0.13; ETS-T=0.82 +/- 0.06; p=0.026), phosphorylated phospholamban at Ser16 (ETS=1.00 +/- 0.14;ETS-T=0.63 +/- 0.10;p=0.003), and phosphorylated phosfolamban/phospholamban ratio (ETS=1.01 +/- 0.17; ETS-T=0.77 +/- 0.11; p=0.050). Conclusion: In normal rats, taurine produces no effects on cardiac morphological or functional variables. on the other hand, in rats exposed to cigarette smoke, taurine supplementation increases wall thickness and worsens diastolic function, associated with alterations in calcium handling protein and cardiac energy metabolism. Copyright (C) 2011 S. Karger AG, Basel

The influence of temperature on the behavior of burrowing in larvae of the blowflies, Chrysomya albiceps and Lucilia cuprina, under controlled conditions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of photoperiod on body weight and depth of burrowing in larvae of Chrysomya megacephala (Fabricius) (Diptera, Calliphoridae) and implications for forensic entomology

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The influence of hydroxyurea on oxidative stress in sickle cell anemia

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The Influence of Solutes on the Enthalpy/Entropy Change of the Actinomycin D Binding to DNA: Hydration, Energy Compensation and Long-Range Deformation on DNA

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influence of surfactants on the effectiveness of bleaching gels

This study evaluated the influence of surfactants on the effectiveness of 35% hydrogen peroxide (HP) and 10% carbamide peroxide (CP) bleaching gels. One hundred and forty bovine teeth were used, which were stained by immersion in a coffee, red wine, and tobacco mixture for 7 days. At the end of this process, the color measurement at baseline was taken with the Vita Easyshade spectrophotometer. The teeth were divided into seven groups: (a) negative control (NC), (b) positive control for HP (PC-35), (c) HP + Tween 20 (T20-35), (d) HP + laurel sodium sulfate (LSS-35), (e) positive control for CP (PC-10), (f) CP + Tween 20 (T20-10), and (g) CP + laurel sodium sulfate (LSS-10). Group NC was kept in artificial saliva for 21 days. Groups PC-35, T20-35, and LSS 35 received three applications of bleaching gel for 10 min; the process was repeated after 7 days. Groups PC-10, T20-10, and LSS-10 received the gel for 8 h per day for 14 days. After the bleaching process, the final color was measured. The analysis of variance and Tukey tests showed statistically significant differences for the parameters of a dagger L, a dagger b, and a dagger E of the HP gels with surfactant and positive control group (PC-35). Within the limits of this in vitro study, the addition of surfactants to HP bleaching gel increased the bleaching effectiveness.

Influence of support on catalytic behavior of nickel catalysts in the steam reforming of ethanol for hydrogen production

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Influence of thickness on crystallization and properties of LiNbO3 thin films

Thin films of lithium niobate were deposited on Pt/Ti/SiO2 (111) substrates by spin coating from the polymeric precursor method (Pechini process). Annealing in static air was performed at 500 degreesC for 3 h. The obtained films were characterized by X-ray diffraction and atomic force microscopy. The dielectric constant, dissipation factor and resistance were measured in frequency region from 10 Hz to 10 MHz and the hysteresis loop was obtained. The influence of number of layers on crystallization, morphology and properties of LiNbO3 thin films is discussed. (C) 2003 Elsevier B.V. All rights reserved.

Influence of liming on residual soil respiration and chemical properties in a tropical no-tillage system

Devido às mudanças climáticas do planeta, principalmente ao aquecimento global, as formas de utilização dos solos na agricultura têm atraído grande atenção de pesquisadores. Mudanças de manejo podem influenciar a respiração do solo e, por conseguinte, alterar drasticamente o sequestro de C. Os objetivos deste trabalho foram avaliar, em semeadura direta, a influência da calagem nas emissões de CO2 do solo e correlacioná-las aos atributos químicos deste após dois anos da calagem. Utilizou-se o delineamento em blocos casualizados, com seis repetições. Os tratamentos constituíram de quatro doses de calcário e uma testemunha. Decorridos dois anos da calagem, avaliou-se a emissão residual de CO2 do solo, coletaram-se amostras nas camadas de 0-5, 5-10, 10-20 e 20-30 cm de profundidade e determinaram-se os teores de P, Ca2+ e Mg2+ e valores de pH e de saturação por bases. A emissão residual de CO2 do solo, quando a dose recomendada foi aplicada, foi 24,1 % superior, quando comparada à do solo sem aplicação de calcário, e 47,4 % maior, quando se aplicou o dobro da dose recomendada. A calagem melhorou as condições químicas do solo, e a emissão de CO2 aumentou linearmente com o aumento das doses. A emissão de CO2 do solo apresentou correlações positivas com os teores de P, Ca2+ e Mg2+ e com os valores de pH e de saturação por bases e negativas com os teores de H + Al e Al3+. Maiores coeficientes de correlação entre as taxas de emissão de CO2 do solo e os atributos químicos deste ocorreram na camada de 10-20 cm.

Influence of activation on the multipoint immobilization of penicillin G acylase on macroporous silica

Penicillin G acylase is the second most important enzyme used by industry in an immobilized form. Penicillin hydrolysis is its main application. This reaction is used to produce 6-aminopenicillanic acid (6-APA), an intermediate in the synthesis of semisynthetic antibiotics. This work aims to compare catalytic properties of different penicillin G acylase (PGA) derivatives obtained by multipoint immobilization of the enzyme on macroporous silica. Enzyme amino groups react with different aldehyde groups produced in the support using either glutaraldehyde or glyoxyl activation. In the former method, silica reacts with g-aminopropyltriethoxysilane (g-APTS) and glutaraldehyde; in the latter, a reaction with glycidoxypropyltrimethoxysilane (GPTMS) is followed by acid hydrolysis and oxidation using sodium periodate. This work determines the influence of degree of activation, using glutaraldehyde, on immobilization parameters. PGA was immobilized on these two different supports. Maximum enzyme load, immobilized enzyme activity (derivative activity), rate of immobilization and thermal stability were checked for both cases. For glutaraldehyde activation, the results showed that 0.5% of the g-APTS is sufficient for all the hydroxyl groups in the silica to react. They also showed that degree of activation only affects immobilization yield and reaction velocity and that reduction of the glutaraldehyde derivatives with sodium borohydride does not affect their thermal stability. In comparing the derivatives obtained using glyoxyl and glutaraldehyde activation, it was observed that the glyoxyl derivatives presented better immobilization parameters, with a maximum enzyme load of 264 IU/g silica and a half-life of 20 minutes at 60 °C.

Influence of sedation on morbidity and mortality in the intensive care unit

CONTEXTO: Embora cerca de 30% a 50% dos pacientes hospitalizados em unidades de terapia intensiva (UTI) recebam algum tipo de sedativo, existe escassez de informações sobre efeitos adversos desta prática, especialmente no Brasil. Estes efeitos podem ser significantes e o uso de sedativos é associado a elevação de infecção e mortalidade, mesmo sendo difícil avaliar o impacto clínico deste procedimento. OBJETIVO: Avaliar o impacto da sedação sobre incidência de complicações e mortalidade em doentes graves durante internação em unidade de terapia intensiva. TIPO DE ESTUDO: Estudo prospectivo. LOCAL: Unidade de Terapia Intensiva Cirúrgica da Universidade Federal de São Paulo (UNIFESP) - Escola Paulista de Medicina. PARTICIPANTES: Após excluídos pacientes que permaneceram menos de 24 horas ou sem exames indispensáveis para o cálculo do índice de gravidade (APACHE II), restaram 307 pacientes. Estes foram divididos em dois grupos: Grupo Sedado e Grupo Não Sedado. Constatada heterogeneidade com relação ao APACHE II, foram pareados 97 sedados e 97 não sedados com idênticos índices de gravidade. VARIÁVEIS ESTUDADAS: Impacto da sedação e das técnicas sobre a mortalidade, tempo de internação, além da incidência de escara de decúbito ou pressão, trombose venosa profunda e infecção. RESULTADOS: Não houve diferença na incidência de trombose venosa profunda, entre os grupos Sedado e Não Sedado, enquanto que escara de decúbito foi significativamente maior nos sedados (p = 0,03). Infecção foi detectada em 45,4% dos pacientes com sedação e em 21,6% dos pacientes sem sedação (p = 0,006). A mortalidade para os pacientes que não receberam qualquer tipo de sedativo foi de 20,6% e, para aqueles que foram sedados durante a internação, foi de 52,6% (p < 0,0001). CONCLUSÕES: Conclui-se que a sedação está associada a maior duração da internação, morbidade e mortalidade significativas. Apesar da intensidade das associações encontradas, não é possível estabelecer relação causal entre sedação e mortalidade.

Influence of genotype on the quality of sheep leather

The objective of this study was to evaluate the influence of crossings between sheep breeds on the intrinsic quality of leather. It was used the skins of 36 lambs (18 females and 18 males), resulting from crosses between ewes of a native breed from the Brazilian state of Mato Grosso do Sul and rams of the same native breed as well as the Texel and Santa Inês genetic groups. The animals were raised in confinement until slaughter weight, from 28 to 32 kg. After slaughter, samples were taken from the skins for histological analysis. The skins were tanned with chromium, retanned and greased. It was taken from the leather samples for electromicrographs and for tests for tensile and tear strength (intrinsic quality). Morphological aspects from the skin as well as from the leather help to understand the results found and they evidence that breeds or crossings among breeds interfere in the intrinsic quality of leather and skin of sheep.

Influence of annealing on X-ray diffraction of natural alexandrite

In this work we present results of X-ray diffraction using powder method, on natural alexandrite samples from Minas Gerais State (Brazil), as a function of a sequence of annealing. From these measurements we determine lattice parameters before (a = 9.405 Angstrom, b = 5.471 Angstrom, c = 4.409 Angstrom) and after annealing, and its structure is confirmed as orthorhombic. Measurements done after an annealing of 15 minutes at 700 degreesC and for 5 hours at 1000 degreesC indicate the migration of atoms present in the sample through different phases, which were also identified by Microprobe Analysis (WDS). However we have verified that such migration does not modify the structure. X-ray diffraction measurements have been carried out in conjunction with optical absorption in the UV-Vis as a function of annealing. (C) 2002 International Centre for Diffraction Data.

The influence of yttrium on a typical SnO2 varistor system: Microstructural and electrical features

The influence of yttrium oxide, Y2O3, on the microstructure development of the SnO(2)center dot Co(3)O(4)center dot Nb2O5 typical varistor system was studied with scanning (SEM) and transmission (TEM) electron microscopies. The different phases present in the studied samples were characterized through XRD, EDS and selected area diffraction patterns (SAD). Particles of Co2SnO4 were observed with TEM in every sample, whereas clusters of the pyrochlore phase T2Sn2O7 were observed with SEM in samples with 0.05, 0.10 and 0.25 mol% of Y2O3. The higher non-linearity (a = 16) was achieved with the addition of 0.05 mol% of Y2O3. The influence of the secondary phases on the electrical properties is also addressed in this work. (c) 2005 Published by Elsevier B.V.