Controlled variation of monomer sequence-distribution in the synthesis of aromatic poly(ether ketone)s

The effects of varying the alkali metal cation in the high-temperature nucleophilic synthesis of a semi-crystalline, aromatic poly(ether ketone) have been systematically investigated, and striking variations in the sequence-distributions and thermal characteristics of the resulting polymers were found. Polycondensation of 4,4'-dihydroxybenzophenone with 1,3-bis(4-fluorobenzoyl)benzene in diphenylsulfone as solvent, in the presence of an alkali metal carbonate M2CO3 (M= Li, Na, K, or Rb) as base, affords a range of different polymers that vary in the distribution pattern of 2-ring and 3-ring monomer units along the chain. Lithium carbonate gives an essentially alternating and highly crystalline polymer, but the degree of sequence-randomisation increases progressively as the alkali metal series is descended, with rubidium carbonate giving a fully random and non-thermally-crystallisable polymer. Randomisation during polycondensation is shown to result from reversible cleavage of the ether linkages in the polymer by fluoride ions, and an isolated sample of alternating-sequence polymer is thus converted to a fully randomised material on heating with rubidium fluoride.

Matrix Metalloproteinase Expression in Teeth with Apical Periodontitis Is Differentially Modulated by the Modality of Root Canal Treatment

Introduction: The objective of this study was to investigate the expression of matrix metalloproteinases (MM Ps) in apical periodontitis and during the periapical healing phase after root canal treatment. Methods: Apical periodontitis was induced in dog teeth, and root canal treatment was performed in a single visit or by using an additional calcium hydroxide root canal dressing. One hundred eighty days after treatment the presence of inflammation was examined, and tissues were stained to detect bacteria. Bacterial status was correlated to the degree of tissue organization, and to further investigate molecules involved in this process, tissues were stained for MMP-1, MMP-2, MMP-8, and MMP-9. Data were analyzed by using one-way analysis of variance followed by Tukey test or Kruskal-Wallis followed by Dunn test. Results: Teeth with apical periodontitis that had root canal therapy performed in a single visit presented an intense inflammatory cell infiltrate. Periapical tissue was extremely disorganized, and this was correlated with the presence of bacteria. Higher MMP expression was evident, similar to teeth with untreated apical periodontitis. In contrast, teeth with apical periodontitis submitted to root canal treatment with calcium hydroxide presented a lower inflammatory cell infiltrate. This group had moderately organized connective tissue, lower prevalence of bacteria, and lower number of MMP-positive cells, similar to healthy teeth submitted to treatment. Conclusions: Teeth treated with calcium hydroxide root canal dressing exhibited a lower percentage of bacterial contamination, a lower MMP expression, and a more organized extracellular matrix, unlike those treated in a single visit. This suggests that calcium hydroxide might be beneficial in tissue repair processes. (J Endod 2010;36:231-237)

Impact of chronic disease on quality of life among the elderly in the state of Sao Paulo, Brazil: a population-based study

Objectives. To assess the impact of chronic disease and the number of diseases on the various aspects of health-related quality of life (HRQOL) among the elderly in Sao Paulo, Brazil. Methods. The SF-36 (R) Health Survey was used to assess the impact of the most prevalent chronic diseases on HRQOL. A cross-sectional and population-based study was carried out with two-stage stratified cluster sampling. Data were obtained from a multicenter health survey administered through household interviews in several municipalities in the state of Sao Paulo. The study evaluated seven diseases-arthritis, back-pain, depression/anxiety, diabetes, hypertension, osteoporosis, and stroke-and their effects on quality of life. Results. Among the 1958 elderly individuals (60 years of age or older), 13.6% reported not having any of the illnesses, whereas 45.7% presented three or more chronic conditions. The presence of any of the seven chronic illnesses studied had a significant effect on the scores Of nearly all the SF-36 (R) scales. HRQOL achieved lower scores when related to depression/anxiety, osteoporosis, and stroke. The higher the number of diseases, the greater the negative effect on the SF-36 (R) dimensions. The presence of three or more diseases significantly affected HRQOL in all areas. The bodily pain, general health, and vitality scales were the most affected by diseases. Conclusions. The study detected a high prevalence of chronic diseases among the elderly population and found that the degree of impact on HRQOL depends on the type of disease. The results highlight the importance of preventing and controlling chronic diseases in order to reduce the number of comorbidities and lessen their impact on HRQOL among the elderly.

Heat tolerance and the effects of shade on the behavior of Simmental bulls on pasture

The objectives were to assess the degree of thermolysis capacity as a characteristic of heat tolerance of the Simmental beef cattle and evaluate the effects of shade and shade type (artificial: AS, trees: TS, or no shade: NS) on daily behavior patterns during summer. Black globe temperature (BGT) was different under the two types of shade (P < 0.05) and was lower under the TS (P < 0.01) and under AS (P > 0.01) than average BGT in the sun. Animals when in AS used more intensely the shade (P = 0.002) mostly lying down under it (10.00-14.00 hours), while time standing was similar (P = 0.107) between TS and NS. Bulls without shade (NS) spent significantly more time at the water trough and most part of the day standing idle (72.4%, 10.1 h/14 h). TS bulls spent more time grazing/standing (P < 0.001). The Simmental bulls that were in TS and AS spent more time ruminating than bulls that stay without shade (NS). The availability of shade changes grazing, rumination and idling behavior of cattle in response to environmental conditions. Shade provided by trees can be more efficient than artificial shading as cattle spent more time grazing when tree shade was available. Thermolysis capacity can be used to select heat-tolerant animals.

Role of PPAR-gamma in the Modulation of CD36 and FcgammaRII induced by LDL with Low and High Degrees of Oxidation During the Differentiation of the Monocytic THP-1 Cell Line

Scavenger or Fc gamma receptors are important for capture and clearance of modified LDL particles by monocytes/macrophages. Uptake via scavenger receptors is not regulated by intracellular levels of cholesterol and in consequence, macrophages develop into foam cells in the arterial intima. The levels of scavenger receptor CD36 are increased in atherosclerotic lesions and there is evidence that some components of oxLDL auto-regulate the expression of this receptor. Fc gamma receptor expression is increased in cardiovascular diseases but it is not known weather their expression is regulated by oxLDL. The biological properties of oxLDLs vary depending on the degree of oxidation. In the present study we investigated the effect of LDL particles showing extensive or low oxidation (HoxLDL and LoxLDL) on the expression of CD36 and Fc gamma RII in a human monocytic cell line (THP-1), differentiated or not to macrophage, and the involvement of PPAR gamma. It was found that both forms of oxLDL are able to increase the expression of CD36 and Fc gamma RII and that this effect is dependent on the degree of oxidation and of the stage of cell differentiation ( monocyte or macrophage). We also showed that the increased expression of Fc gamma RII is dependent on PPAR. whereas that of the CD36 is independent of PPAR gamma. Copyright (c) 2008 S. Karger AG, Basel

Changes on degree of conversion of dual-cure luting light-cured with blue LED

The indirect adhesive procedures constitute recently a substantial portion of contemporary esthetic restorative treatments. The resin cements have been used to bond tooth substrate and restorative materials. Due to recently introduction of the self-bonding resin luting cement based on a new monomer, filler and initiation technology has become important to study the degree of conversion of these new materials. In the present work the polymerization reaction and the filler content of dual-cured dental resin cements were studied by means of infra-red spectroscopy (FT-IR) and thermogravimetry (TG). Twenty specimens were made in a metallic mold (8 mm diameter x 1 mm thick) from each of 2 cements, PanaviaA (R) F2.0 (Kuraray) and RelyX (TM) Unicem Applicap (3M/ESPE). Each specimen was cured with blue LED with power density of 500 mW/cm(2) for 30 s. Immediately after curing, 24 and 48 h, and 7 days DC was determined. For each time interval 5 specimens were pulverized, pressed with KBr and analyzed with FT-IR. The TG measurements were performed in Netzsch TG 209 under oxygen atmosphere and heating rate of 10A degrees C/min from 25 to 700A degrees C. A two-way ANOVA showed DC (%) mean values statistically significance differences between two cements (p < 0.05). The Tukey`s test showed no significant difference only for the 24 and 48 h after light irradiation for both resin cements (p > 0.05). The Relx-Y (TM) Unicem mean values were significantly higher than PanaviaA (R) F 2.0. The degree of conversion means values increasing with the storage time and the filler content showed similar for both resin cements.

Degree of Conversion and Temperature Increase of a Composite Resin Light Cured with an Argon Laser and Blue LED

Different light sources and power densities used on the photoactivation process may provide changes in the degree of conversion (DC%) and temperature ( T) of the composite resins. Thus, the purpose of this study was to evaluate the DC (%) and T (degrees C) of the microhybrid composite resin (Filtek (TM) Z-250, 3M/ESPE) photoactivated with one argon laser and one LED (light-emitting diode) with different power densities. For the KBr pellet technique, the composite resin was placed into a metallic mould (2-mm thickness, 4-mm diameter) and photoactivated as follows: a continuous argon laser (CW) and LED LCUs with power density values of 100, 400, 700, and 1000 mW/cm(2) for 20 s. The measurements for DC (%) were made in a FTIR spectrometer Bomen ( model MB 102, Quebec, Canada). Spectroscopy ( FTIR) spectra for both uncured and cured samples were analyzed using an accessory of the reflectance diffusion. The measurements were recorded in absorbance operating under the following conditions: 32 scans, 4 cm(-1) resolution, 300 to 4000-cm(-1) wavelength. The percentage of unreacted carbon double bonds (% C=C) was determined from the ratio of absorbance intensities of aliphatic C=C (peak at 1638 cm(-1)) against an internal standard before and after the curing of the specimen: aromatic C-C (peak at 1608 cm(-1)). For T (degrees C), the samples were created in a metallic mould (2-mm thickness, 4-mm diameter) and photoactivated for 20 s. The thermocouple was attached to the multimeter allowing temperature readings. The DC (%) and T (degrees C) were submitted to ANOVA and Tukey`s test (p < 0.05). The degree of conversion values varied from 35.0 to 50.0% ( 100 to 1000 mW/cm(2)) for an argon laser and from 41.0 to 49% (100 to 1000 mW/cm(2)) for an LED. The temperature change values varied from 1.1 to 13.1 degrees C (100 to 1000 mW/cm(2)) for an argon laser and from 1.9 to 15.0 degrees C (100 to 1000 mW/cm(2)) for an LED. The power densities showed a significant effect on the degree of conversion and changes the temperature for both light-curing units.

Flexural properties, microleakage, and degree of conversion of a resin polymerized with conventional light and argon laser

Objective: To evaluate the flexural strength, microleakage, and degree of conversion of a microhybrid resin polymerized with argon laser and halogen lamp. Method and Materials: For both flexural test and degree of conversion analysis, 5 bar samples of composite resin were prepared and polymerized according to ISO 4049. The halogen light-curing unit was used with 500 MW/cm(2) for 20 seconds and the argon laser with 250 mW for 10 and 20 seconds. Samples were stored in distilled water in a dark environment at 37 degrees C for 24 hours. The flexural property was quantified by a 3-point loading test. For the microleakage evaluation, 60 bovine incisors were used to prepare standardized Class 5 cavities, which were restored and polished. Specimens were stored in distilled water for 24 hours at 37 degrees C and thermocycled 500 times (6 degrees C to 60 degrees C). Specimens were then immersed in art aqueous solution of basic fuchsin for 24 hours. Longitudinal sections of each restoration were obtained and examined with a stereomicroscope for qualitative evaluation of microleakage. Fourier transform (FT)-Raman RFS 100/S spectrometer (Bruker) was used to analyze the degree of conversion. Results: ANOVA showed no statistically significant differences of flexural strength between the photoactivation types evaluated in the flexural study. Microleakage data were statistically analyzed by Mann-Whitney and Kruskal-Wallis tests. Enamel margins resulted in a statistically lower degree of leakage than dentin margins. No statistically significant difference was found among the 3 types of photocuring studied. ANOVA also showed no statistically significant difference in the degree of conversion among the studied groups. Conclusion: According to the methodology used in this research, the argon laser is a possible alternative for photocuring, providing the same quality of polymerization as the halogen lamp. None of the photocured units tested in this study completely eliminated microleakage.

The latitude dependent irradiation distribution in Europe and its implication for the design of stationary concentrators

When a stationary solar concentrator is designed, the spatial distribution of the available irradiation is of vital interest. An irradiation distribution based only on solar geometry will look similar at different sites. The only difference is that the distribution of the incident irradiation is shifted to lower solar altitudes when latitude is increased. However, real irradiation distribution will show strong asymmetry at high latitude sites, since the winter irradiation is reduced by absorption and scattering in the atmosphere, and by seasonal changes in the climate. The reduced winter irradiation at high latitudes implies that the available annual radiation is concentrated to a narrower angular interval. This means that the degree of concentration that is possible increases with latitude.In the paper examples of irradiation distribution from different sites in Europe from latitude 38°N to 65°N are shown. The origin of the reduced winter irradiation with increased latitude is discussed, and numerical examples on the performance of different types of stationary concentrators for different latitudes are given.

The Development of Swedish Tourism Public Policy 1930-2010

In this article, the development and changes in Swedish public policy relating to tourism from the 1930s to 2010 is described and interpreted from a political economy perspective. A case study, compiled from mainly secondary sources, is analyzed from a theoretical framework based on regulation theory. The purpose with this study is to increase the understanding of how the macro political economy context has influenced the policy-making in tourism in Sweden, but also to make a contribution to an area which seems to be quite neglected when it comes to research. The changes are analyzed according to the three periods denoted as pre-Fordism (mid-19th century-1930s), Fordism (1930s-1970s) and post-Fordism (1970s to present). It is observed how the general changes between these periods regarding aspects such as regulation and deregulation, and the degree of state involvement, have affected tourism policy making. The tourism policy making has changed from being insignificant, to a high degree of state involvement including planning, control and supervision, to a situation where the market rather than government regulation is considered as state of the art. 

The state of the youth: prisons, drugs and car crashes

By virtue of the volume and nature of their attributions, including secondary school as well as problem-areas such as security and traffic, the Brazilian states are the ultimate responsible entities for young people. This study argues in favour of granting greater freedom for the states to define their own public policy parameters to deal with local features and to increase the degree of learning about such actions at the national level. In empirical terms, the study assesses the impacts of new laws, such as the new traffic code (from the joint work with Leandro Kume, EPGE/FGV doctor’s degree student) and traces the statistics for specific questions like drugs, violence and car accidents. The findings show that these questions produce different results for young men and women.The main characters in these dramas are young single males, suggesting the need for more distinguished public policies according not only to age, but also by gender. The study also reveals that the magnitude of these problems changes according to the youth’s social class. Prisons concern poorer men (except for the functional illiterate) while fatal car accidents and the confessed use of drugs concern upper-class boys.

How does corruption hurt growth? Evidences about the effects of corruption on factors productivity and per capita income

Corruption is a phenomenon that plagues many countries and, mostly, walks hand in hand with inefficient institutional structures, which reduce the effectiveness of public and private investment. In countries with widespread corruption, for each monetary unit invested, a sizable share is wasted, implying less investment. Corruption can also be a burden on a nation’s wealth and economic growth, by driving away new investment and creating uncertainties regarding private and social rights. Thus, corruption can affect not only factors productivity, but also their accumulation, with detrimental consequences on a society’s social development. This article aims to analyze and measure the influence of corruption on a country’s wealth. It is implicitly admitted that the degree of institutional development has an adverse effect on the productivity of production factors, which implies in reduced per capita income. It is assumed that the level of wealth and economic growth depends on domestic savings, foster technological progress and a proper educational system. Corruption, within this framework, is not unlike an additional cost, which stifles the “effectiveness” of the investment. This article first discusses the key theories evaluating corruption’s economic consequences. Later, it analyzes the relation between institutional development, factor productivity and per capita income, based on the neoclassical approach to economic growth. Finally, it brings some empirical evidence regarding the effects of corruption on factor productivity, in a sample of 81 countries studied in 1998. The chief conclusion is that corruption negatively affects the wealth of a nation by reducing capital productivity, or its effectiveness.

Models of complexity in Robert Coover's John's wife and the adventures of Lucky Pierre

This doctoral dissertation analyzes two novels by the American novelist Robert Coover as examples of hypertextual writing on the book bound page, as tokens of hyperfiction. The complexity displayed in the novels, John's Wife and The Adventures of Lucky Pierre, integrates the cultural elements that characterize the contemporary condition of capitalism and technologized practices that have fostered a different subjectivity evidenced in hypertextual writing and reading, the posthuman subjectivity. The models that account for the complexity of each novel are drawn from the concept of strange attractors in Chaos Theory and from the concept of rhizome in Nomadology. The transformations the characters undergo in the degree of their corporeality sets the plane on which to discuss turbulence and posthumanity. The notions of dynamic patterns and strange attractors, along with the concept of the Body without Organs and Rhizome are interpreted, leading to the revision of narratology and to analytical categories appropriate to the study of the novels. The reading exercised throughout this dissertation enacts Daniel Punday's corporeal reading. The changes in the characters' degree of materiality are associated with the stages of order, turbulence and chaos in the story, bearing on the constitution of subjectivity within and along the reading process. Coover's inscription of planes of consistency to counter linearity and accommodate hypertextual features to the paper supported narratives describes the characters' trajectory as rhizomatic. The study led to the conclusion that narrative today stands more as a regime in a rhizomatic relation with other regimes in cultural practice than as an exclusively literary form and genre. Besides this, posthuman subjectivity emerges as class identity, holding hypertextual novels as their literary form of choice.

The effects of trust in Brazilian PNPs: interpersonal and interorganizational trust in the cultural sector social organizations in São Paulo, Brazil

This study seeks to evaluate how enterorganizational and interpersonal trust affects the degree of State interference in the operations of public-nonprofit partnerships (PNPs). We conducted a qualitative case study in two Brazilian PNPs, Projeto Guri and Orquestra Sinfônica do Estado de São Paulo, through documental analysis and semi-structured interviews. Content analysis of the data yielded a trust framework that begins to explain how a variety of factors, including the protective qualities of the management contract and the strength of the board, moderate the relationship between interpersonal and interorganizational trust in PNPs. The study reveals that unlike Zaheer et al (1998), interpersonal trust had a unique and prominent effect on State interference and types of collaboration in PNPs. Parting from the suggestions by previous authors to contextualize PNP literature findings, the framework takes into account the highly personalistic qualities of Brazilian culture as well as historical and institutional context while highlighting the crucial role of interpersonal trust in Brazilian PNPs.

Compliance to law and effectiveness of the rule of law in Brazil

The goal of this paper is to debate the degree of effectiveness of the rule of law in Brazil, through a survey measuring perceptions, attitudes and habits of Brazilians in regard to compliance to law. The survey conducted in Brazil is based on the study conducted by Tom R. Tyler in the United States, entitled Why People Obey the Law? (New Haven, CT: Yale University Press, 1990). The main argument of Tyler´s study is that people obey the law when they believe it’s legitimate, and not because they fear punishment. We test the same argument in Brazil, relying on five indicators: (i) behavior, which depicts the frequency with which respondents declared to have engaged in conducts in disobedience to the law; (ii) instrumentality, measuring perception of losses associated with the violation of the law, specially fear of punishment; (iii) morality, measuring perception of how much is right or wrong to engage in certain conducts in violation of the law; (iv) social control, which measures perception of social disapproval of certain types of behavior in violation of the law, and (v) legitimacy, which measures the perception of respect to the law and to some authorities. Results indicate that fear of sanctions is not the strongest drive in compliance to law, but more than legitimacy, indicators of morality and social control are the strongest in explaining why people obey the law in Brazil.