Relação entre ambiente familiar e capacidade funcional de idosos residentes no município de Jequié-BA

(Objective) Assess the functional capacity and determine the difference between the means of functional capacity (basic and instrumental activities of daily living) and the age groups of elderly residents in an outlying area in the hinterland of Bahia/Northeast of Brazil. (Methods) Analytical study with cross-sectional design and a sample of 150 elderly individuals enrolled in four Health Units in the municipality of Jequié, Bahia, Brazil. The instrument consisted of sociodemographic and health data, the Barthel Index and the Lawton scale. (Results) In all, 78.00% of the elderly were classified as dependent in the basic activities and 65.33% in the instrumental activities of daily living. Using the Kruskal- Wallis test, we found a statistically significant difference between the means of instrumental activities and the age groups (p= 0.011). (Conclusion) An elevated number of elderly were classified as dependent in terms of functional capacity and increased age is related to greater impairment in the execution of instrumental activities of daily living

Tempo de migração dos macrófagos em matrinxã, Brycon amazonicus, por meio da técnica de inoculação de leveduras Saccharomyces cerevisiae

Na aquicultura são utilizados análises da ativação e incremento da migração de macrófagos, com intuito de verificar a capacidade imunológica inespecífica dos peixes frente a um desafio. Neste sentido, o objetivo deste estudo foi determinar o tempo de migração de monócitos/macrófagos para a cavidade peritoneal em matrinxã, Brycon amazonicus, por meio da técnica de inoculação de leveduras Saccharomyces cerevisiae, e verificar as possíveis alterações dos parâmetros hematológicos após o estímulo. Foram utilizados 30 matrinxãs com peso médio de 101,55 ± 24,50 g e comprimento médio de 19,75 ± 1,72 cm. Os tempos de inoculação utilizados foram 2, 4, 8 e 12 horas, sendo utilizados 6 animais por tempo. Após os períodos de incubação (2, 4, 8 e 12 horas), os exemplares foram anestesiados e alíquotas de sangue foram coletadas por punção do vaso caudal, para a análise: número total de células, contagem diferencial e total dos leucócitos e contagem total de trombócitos, hematócrito, taxa de hemoglobina e índices hematimétricos (VCM, HCM e CHCM). Os resultados mostram que a capacidade fagocítica do macrófago não apresentou diferenças significativas entre os tempos experimentais. Com relação ao índice fagocítico, o tempo de 2 horas representa o tempo em que os macrófagos fagocitaram maior número de leveduras com diferenças significativas em relação aos outros tempos experimentais, indicando que este tempo (2 horas) de incubação foi suficiente para a migração e ativação máxima dos macrófagos da cavidade peritoneal, da espécie estudada. Os valores do número de eritrócitos apresentaram diferenças entre os tempos de incubação. Entretanto, os valores dos outros parâmetros hematológicos não apresentaram diferenças significativas.

Aspectos de patogenicidade e relacionamento genético de isolados clínicos vaginas e anais de Candida albicans oriundos de pacientes com candidíase vulvovaginal

Vulvovaginal candidiasis (VVC) is one of the most common causes of vaginitis and affects about 75% of women of reproductive age. The majority of cases (80 to 90%) are due to C. albicans, the most virulent species of the genus Candida. Virulence attributes are scarcely investigated and the source of infection remains uncertain. Objective: This study aimed to evaluate the virulence factors and genotypes of clinical isolates of C. albicans sequentially obtained from the anus and vagina of patients with sporadic and recurrent VVC. Materials and methods: We analyzed 62 clinical isolates of C. albicans (36 vaginal and 26 anal strains). Direct examination of vaginal and anal samples and colony forming units (CFU) counts were performed. Yeasts were identified using the chromogenic media CHROMagar Candida® and by classical methodology, and phenotypically characterized regarding to virulence factors, including the ability to adhere to epithelial cells, proteinase activity, morphogenesis and biofilm formation. The genotypes of the strains were investigated with ABC genotyping, microsatellite genotyping with primer M13 and RAPD. Results: We found 100% agreement between direct examination and culture of vaginal samples. Filamentous forms were present in most of the samples of vaginal secretion, which presented CFU counts significantly higher than the samples of anal secretion. There was no statistically significant difference between virulence factors of infecting vaginal isolates and those presented by colonizing anal isolates; as well as for the comparison of the vaginal isolates from patients with different clinical conditions (sporadic or recurrent VVC). There was a decrease in the ability to adhere to HBEC, morphogenesis and biofilm formation of the vaginal isolates during the progress of infection. There was an association between the ability to express different virulence factors and the clinical manifestations presented by the patients. Genotype A was the most prevalent (93.6%), followed by genotype C (6.4%). We found maintenance of the same ABC genotype and greater prevalence of microevolution for the vaginal strains of C. albicans sequentially obtained. Vaginal and anal isolates of C. albicans obtained simultaneously from the same patient presented the same ABC genotype and high genetic relatedness. Conclusion: It is noteworthy that the proliferation of yeast and bud-to-hypha transition are important for the establishment of CVV. The expression of virulence factors is important for the pathogenesis of VVC, although it does not seem to be determinant in the transition from colonization to infection or to the installation of recurrent condition. Genotype A seems to be dominant over the others in both vaginal and anal isolates of patients with VVC. The most common scenario was microevolution of the strains of C. albicans in the vaginal environment. It is suggested that the anal reservoir constituted a possible source of vaginal infection, in most cases assessed

Características genotípicas e fenotípicas de Candida Albicans isoladas da cavidade bucal de pacientes transplantados renais com ênfase na ação do extrato bruto de Eugenia uniflora em fatores de virulência

Candida albicans is a diploid yeast that in some circumstances may cause oral or oropharyngeal infections. The investigation of natural products is mandatory for the discovery of new targets for antifungal drugs development. This study aimed to determine the genotypes of 48 clinical isolates of C. albicans obtained from the oral cavity of kidney transplant patients from two distinct geographic regions of Brazil. In addition, we investigated three virulence factors in vitro: phospholipase activity, morphogenesis and the ability to evade from polymorphonuclear neutrophils. The expression of these virulence factors in vitro was also investigated in the presence of the crude extract of Eugenia uniflora. The genotype A was the most prevalent (30 isolates; 62.5%), followed by genotype C (15 isolates; 31.5%) and genotype B (3 isolates; 6.25%). When microsatellite technique with primer M13 was applied, 80% of the isolates from the South were placed within the same cluster. All Genotype C strains were grouped together within two different clusters. Genotype C was considered more resistant to PMNs attack than genotypes A and B. Strains isolated from the South of Brazil showed higher ability to combat PMNs phagocytosis. We found a high rate of genotype C strains isolated from the oral cavity of this group of patients. The crude extract of E. uniflora inhibited proper hypha formation and phagocytosis by PMNs, but had no significant effect on phospholipase activity. This study characterized oral C. albicans strains isolated from kidney transplant recipients and will contribute for the better understanding of the pathogenesis and alternative therapeutics for oral candidiasis

Capacidade reprodutiva e preferência da traça-das-crucíferas para diferentes brassicáceas

O objetivo desta pesquisa foi comparar diferentes cultivares de brassicáceas em relação à capacidade reprodutiva e preferência para alimentação e oviposição da traça-das-crucíferas. Os experimentos foram realizados utilizando-se as cultivares de repolho Midori, Chato-de-Quintal, híbridos da Top Seed® - Agristar (TPC 308, TPC 681 e TPC 668), couve-flor Bola de Neve, couve brócolis Ramoso Piracicaba Precoce e couve Manteiga da Geórgia, sendo esta última utilizada como padrão de suscetibilidade. Por meio dos dados biológicos de P. xylostella foram estimados os parâmetros necessários para a construção de tabela de vida de fertilidade, para comparação das cultivares testadas em relação à capacidade reprodutiva da praga. em gaiolas de criação da traça-das-crucíferas foram colocados quatro quartos de folha, dois a dois, que justapostos formavam um círculo de 8 cm de diâmetro, confrontando-se os materiais dois a dois. As partes foram dispostas equidistantemente, para realização do teste de dupla chance de escolha (preferência para alimentação e oviposição) e de múltipla chance de escolha, confrontando todos os substratos (preferência para alimentação). As cultivares que proporcionaram melhor desenvolvimento e reprodução para a traça-das-crucíferas foram couve Manteiga da Geórgia e couve brócolis. Para preferência alimentar constatou-se alta suscetibilidade em couve Manteiga e TPC 681 e para preferência de oviposição alta preferência para couve-flor Bola de Neve. Com isso, sugere-se a divisão das cultivares estudadas em quatro classes distintas: repolho Midori como moderadamente resistente (MR); couve-flor Bola de Neve e repolho Chato-de-Quintal como suscetíveis (S); couve brócolis, TPC308, TPC681 e TPC668 como moderadamente suscetíveis (MS); e couve Manteiga como altamente suscetível (AS).

Ocorrência de Bacillus cereus em leite integral e capacidade enterotoxigênica das cepas isoladas

Pesquisaram-se a presença de Bacillus cereus e a produção de enterotoxinas produzidas por esses microrganismos em 120 amostras de diversos tipos de leite. Bacillus cereus foi isolado e identificado em 22 (73,3%), 15 (50,0%), 29 (96,7%) e quatro (13,3%) amostras de leite em pó, cru, pasteurizado e UAT (longa vida), respectivamente. Para a detecção de enterotoxinas pela técnica da alça ligada de coelho, foram positivos, respectivamente, três (13,6%), um (7,1%) e 10 (35,7%) microrganismos isolados das amostras de leite em pó, leite cru e leite pasteurizado. Pelo teste de aumento de permeabilidade vascular, dois (9,1%), um (7,1%), um (3,6%) e um (4,0%) microrganismos isolados de leite em pó, cru, pasteurizado e UAT apresentaram-se enterotoxigênicos, respectivamente. O uso da técnica de aglutinação passiva em látex demonstrou a produção da toxina diarréica por três (33,3%), sete (63,6%), quatro (30,8%) e oito (80,0%) microrganismos isolados, respectivamente, de leite em pó, cru, pasteurizado e UAT. Os resultados indicam um risco potencial, podendo colocar em risco a saúde dos consumidores desses produtos.

Características agronômicas e qualidade comercial de cultivares de milho pipoca em alta população

Com o objetivo de identificar cultivares de milho pipoca que se constituam em alternativa viável aos produtores foi conduzido um experimento em delineamento experimental de blocos casualizados, com cinco genótipos de milho pipoca (BRS Ângela, Zélia, IAC 112, IAC 12 e IAC TC-01) e quatro repetições, na safra 2003/2004. O experimento foi instalado em espaçamento entre as linhas de 60 cm, com densidade populacional de 75 mil plantas por hectare. No decorrer do experimento, foram avaliadas características agronômicas e comerciais em condição de campo e de laboratório. A variedade BRS Ângela apresentou maior produtividade, seguida pelos híbridos simples IAC, com Zélia (híbrido triplo) apresentando menor produtividade. O híbrido simples IAC 12 apresentou pior qualidade comercial de pipoca. A produção de grãos está associada positivamente com o número de grãos por espiga e com a massa de 1.000 grãos e negativamente com o teor de Ntotal no grão. A qualidade comercial se correlacionou negativamente com a massa de 1.000 grãos.

Evidências de validação de um protocolo para assistência às pessoas com úlceras venosas em serviços de alta complexidade

Venous ulcers are lesions resulting from chronic venous insufficiency, venous valvular abnormalities and venous thrombosis. Its occurrence has been growing with the increase in life expectancy of the world population. Considered as fundamental aspects in the approach to the person with venous ulcer care with the interdisciplinary approach, adoption of protocol-specific knowledge, technical skill, coordination between levels of care complexity of the Health System and active participation of patients and their families, a holistic perspective. The construction of a clinical protocol for people with venous ulcers can help professionals of high complexity services in patient assessment and the establishment of quality care in a systematic way and focused on the factors that interfere with wound healing. Thus, this study aimed to analyze the evidence of validation of a clinical protocol for people with venous ulcers treated at high-complexity services. This is a methodological study with a quantitative approach, developed in three stages: literature review, evidence of content validity and evidence of validation in the clinical context. Approved by the Federal University of Rio Grande do Norte Research Ethics Committee (Opinion: 147.452 and CAAE: 07556312.0.0000.5537). The literature review was conducted in August and September 2012, becoming the basis for the construction of the protocol. Then the evidence of content validity, which included 53 judges (experts) selected by the Lattes platform to evaluate the protocol items was performed. The judges were contacted by e-mail and rated the protocol via Google Docs . After analyzing the ratios obtained in this step, which reported kappa between 0.75 and 0.96 and between 0.80 and 0.98 IVC, and the suggestions of the judges, the protocol was adjusted and subjected to empirical evidence to validate the clinical setting at the University Hospital Onofre Lopes in Natal / RN. Evidence of validation in the clinical setting involved 4 judges who acted in pairs (paired) evaluated 32 patients with venous ulcers in the clinical context of high complexity. In both stages, we used the Kappa Index and Content Validity Index to analyze the responses of the judges. The parameters set as acceptable for these indices were: Kappa ≥ 0.61 and Content Validity Index > 0.80. Any evidence of content validity, as evidence of validation in the clinical context, the protocol items that have not reached Kappa and Content Validity Index established indices were excluded and some items were modified or added after suggestions. The process of content validation evidence and evidence of validation in the clinical setting allowed the improvement of the protocol for the care of people with venous ulcers initially proposed. The initial version of the protocol, built from the literature, contained 15 categories and 108 items; after evidence of content validity, remained the reduction to 15 categories with 91 items; the final version, clinically validated, is composed of the same 15 categories, 76 items. The protocol was validated in its content and in the clinical aspect, so we accepted the alternative hypothesis in the study. This protocol may contribute to the care system, allowing tailor behaviors and promote greater resolution in the treatment of people with venous ulcers in health services of high complexity

Conversor CC/CA de alta freqüência baseado em inversores ressonantes com comutação seqüencial para excitação de uma tocha indutiva a plasma térmico

This work describes the study, the analysis, the project methodology and the constructive details of a high frequency DC/AC resonant series converter using sequential commutation techniques for the excitation of an inductive coupled thermal plasma torch. The aim of this thesis is to show the new modulation technique potentialities and to present a technological option for the high-frequency electronic power converters development. The resonant converter operates at 50 kW output power under a 400 kHz frequency and it is constituted by inverter cells using ultra-fast IGBT devices. In order to minimize the turn-off losses, the inverter cells operates in a ZVS mode referred by a modified PLL loop that maintains this condition stable, despite the load variations. The sequential pulse gating command strategy used it allows to operate the IGBT devices on its maximum power limits using the derating and destressing current scheme, as well as it propitiates a frequency multiplication of the inverters set. The output converter is connected to a series resonant circuit constituted by the applicator ICTP torch, a compensation capacitor and an impedance matching RF transformer. At the final, are presented the experimental results and the many tests achieved in laboratory as form to validate the proposed new technique

Desenvolvimento de antenas de microfita e antenas DRA Broadband

The search for ever smaller device and without loss of performance has been increasingly investigated by researchers involving applied electromagnetics. Antennas using ceramics materials with a high dielectric constant, whether acting as a substract element of patch radiating or as the radiant element are in evidence in current research, that due to the numerous advantages offered, such as: low profile, ability to reduce the its dimensions when compared to other devices, high efficiency of ratiation, suitability the microwave range and/or millimeter wave, low temperature coefficient and low cost. The reason for this high efficiency is that the dielectric losses of ceramics are very low when compared to commercially materials sold used in printed circuit boards, such as fiberglass and phenolite. These characteristics make ceramic devices suitable for operation in the microwave band. Combining the design of patch antennas and/or dielectric resonator antenna (DRA) to certain materials and the method of synthesis of these powders in the manufacture of devices, it s possible choose a material with a dielectric constant appropriate for the design of an antenna with the desired size. The main aim of this work is the design of patch antennas and DRA antennas on synthesis of ceramic powders (synthesis by combustion and polymeric precursors - Pe- chini method) nanostructured with applications in the microwave band. The conventional method of mix oxides was also used to obtain nanometric powders for the preparation of tablets and dielectric resonators. The devices manufactured and studied on high dielectric constant materials make them good candidates to have their small size compared to other devices operating at the same frequency band. The structures analyzed are excited by three different techniques: i) microstrip line, ii) aperture coupling and iii) inductive coupling. The efficiency of these techniques have been investigated experimentally and compared with simulations by Ansoft HFSS, used in the accurate analysis of the electromagnetic behavior of antennas over the finite element method (FEM). In this thesis a literature study on the theory of microstrip antennas and DRA antenna is performed. The same study is performed about the materials and methods of synthesis of ceramic powders, which are used in the manufacture of tablets and dielectric cylinders that make up the devices investigated. The dielectric media which were used to support the analysis of the DRA and/or patch antennas are analyzed using accurate simulations using the finite difference time domain (FDTD) based on the relative electrical permittivity (er) and loss tangent of these means (tand). This work also presents a study on artificial neural networks, showing the network architecture used and their characteristics, as well as the training algorithms that were used in training and modeling some parameters associated with the devices investigated

Modelagem e controle de um microveículo aéreo: uma aplicação de estabilidade robusta com a técnica backstepping em uma estrutura hexarrotor

In this Thesis, the development of the dynamic model of multirotor unmanned aerial vehicle with vertical takeoff and landing characteristics, considering input nonlinearities and a full state robust backstepping controller are presented. The dynamic model is expressed using the Newton-Euler laws, aiming to obtain a better mathematical representation of the mechanical system for system analysis and control design, not only when it is hovering, but also when it is taking-off, or landing, or flying to perform a task. The input nonlinearities are the deadzone and saturation, where the gravitational effect and the inherent physical constrains of the rotors are related and addressed. The experimental multirotor aerial vehicle is equipped with an inertial measurement unit and a sonar sensor, which appropriately provides measurements of attitude and altitude. A real-time attitude estimation scheme based on the extended Kalman filter using quaternions was developed. Then, for robustness analysis, sensors were modeled as the ideal value with addition of an unknown bias and unknown white noise. The bounded robust attitude/altitude controller were derived based on globally uniformly practically asymptotically stable for real systems, that remains globally uniformly asymptotically stable if and only if their solutions are globally uniformly bounded, dealing with convergence and stability into a ball of the state space with non-null radius, under some assumptions. The Lyapunov analysis technique was used to prove the stability of the closed-loop system, compute bounds on control gains and guaranteeing desired bounds on attitude dynamics tracking errors in the presence of measurement disturbances. The controller laws were tested in numerical simulations and in an experimental hexarotor, developed at the UFRN Robotics Laboratory

Análise de antenas utilizando substrato cerâmico, zpt, produzido por síntese auto propagante para aplicações em sistemas de micro-ondas

Ceramic substrates have been investigated by researchers around the world and has achieved a high interest in the scientific community, because they had high dielectric constants and excellent performance in the structures employed. Such ceramics result in miniaturized structures with dimensions well reduced and high radiation efficiency. In this work, we have used a new ceramic material called lead zinc titanate in the form of Zn0,8Pb0,2TiO3, capable of being used as a dielectric substrate in the construction of various structures of antennas. The method used in constructing the ceramic combustion synthesis was Self- Sustained High Temperature (SHS - "Self-Propagating High-Temperature Synthesis") which is defined as a process that uses highly exothermic reactions to produce various materials. Once initiated the reaction area in the reaction mixture, the heat generated is sufficient to become self-sustaining combustion in the form of a wave that propagates converting the reaction mixture into the product of interest. Were analyzed aspects of the formation of the composite Zn0,8Pb0,2TiO3 by SHS powders and characterized. The analysis consisted of determining the parameters of the reaction for the formation of the composite, as the ignition temperature and reaction mechanisms. The production of composite Zn0,8Pb0,2TiO3 by SHS performed in the laboratory, was the result of a total control of combustion temperature and after obtaining the powder began the development of ceramics. The product was obtained in the form of regular, alternating layers of porous ceramics and was obtained by uniaxial pressing. 10 The product was characterized by analysis of dilatometry, X-ray diffraction analysis and scanning electron microscopy. One of the contributions typically defined in this work is the development of a new dielectric material, nevertheless presented previously in the literature. Therefore, the structures of the antennas presented in this work consisted of new dielectric ceramics based Zn0,8Pb0,2TiO3 usually used as dielectric substrate. The materials produced were characterized in the microwave range. These are dielectrics with high relative permittivity and low loss tangent. The Ansoft HFSS, commercial program employee, using the finite element method, and was used for analysis of antennas studied in this work

Síntese de superfícies seletivas de frequência atráves de técnicas de computação natural

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Técnica de controle adaptativo robusto aplicada a filtros ativos de potência e paralelo

The Methods for compensation of harmonic currents and voltages have been widely used since these methods allow to reduce to acceptable levels the harmonic distortion in the voltages or currents in a power system, and also compensate reactive. The reduction of harmonics and reactive contributes to the reduction of losses in transmission lines and electrical machinery, increasing the power factor, reduce the occurrence of overvoltage and overcurrent. The active power filter is the most efficient method for compensation of harmonic currents and voltages. The active power filter is necessary to use current and voltage controllers loop. Conventionally, the current and voltage control loop of active filter has been done by proportional controllers integrative. This work, investigated the use of a robust adaptive control technique on the shunt active power filter current and voltage control loop to increase robustness and improve the performance of active filter to compensate for harmonics. The proposed control scheme is based on a combination of techniques for adaptive control pole placement and variable structure. The advantages of the proposed method over conventional ones are: lower total harmonic distortion, more flexibility, adaptability and robustness to the system. Moreover, the proposed control scheme improves the performance and improves the transient of active filter. The validation of the proposed technique was verified initially by a simulation program implemented in C++ language and then experimental results were obtained using a prototype three-phase active filter of 1 kVA

Análise do efeito do tempo da moagem de alta energia no tamanho de cristalito e microdeformação da rede cristalina do WC-Co

Hard metals are the composite developed in 1923 by Karl Schröter, with wide application because high hardness, wear resistance and toughness. It is compound by a brittle phase WC and a ductile phase Co. Mechanical properties of hardmetals are strongly dependent on the microstructure of the WC Co, and additionally affected by the microstructure of WC powders before sintering. An important feature is that the toughness and the hardness increase simultaneously with the refining of WC. Therefore, development of nanostructured WC Co hardmetal has been extensively studied. There are many methods to manufacture WC-Co hard metals, including spraying conversion process, co-precipitation, displacement reaction process, mechanochemical synthesis and high energy ball milling. High energy ball milling is a simple and efficient way of manufacturing the fine powder with nanostructure. In this process, the continuous impacts on the powders promote pronounced changes and the brittle phase is refined until nanometric scale, bring into ductile matrix, and this ductile phase is deformed, re-welded and hardened. The goal of this work was investigate the effects of highenergy milling time in the micro structural changes in the WC-Co particulate composite, particularly in the refinement of the crystallite size and lattice strain. The starting powders were WC (average particle size D50 0.87 μm) supplied by Wolfram, Berglau-u. Hutten - GMBH and Co (average particle size D50 0.93 μm) supplied by H.C.Starck. Mixing 90% WC and 10% Co in planetary ball milling at 2, 10, 20, 50, 70, 100 and 150 hours, BPR 15:1, 400 rpm. The starting powders and the milled particulate composite samples were characterized by X-ray Diffraction (XRD) and Scanning Electron Microscopy (SEM) to identify phases and morphology. The crystallite size and lattice strain were measured by Rietveld s method. This procedure allowed obtaining more precise information about the influence of each one in the microstructure. The results show that high energy milling is efficient manufacturing process of WC-Co composite, and the milling time have great influence in the microstructure of the final particles, crushing and dispersing the finely WC nanometric order in the Co particles