Alternativas de ultimação de resíduo plástico termofixo

In the present work it was developed originals alternatives of enveronmentally safe and economically viable destination of thermoset plastic residue from a button factory, which at presnte stores such residue tempor and in a way that is inconvenient to the atmosphere, a waiting safe solutions. As the residue is not recycleab and its burning leberates strongly aggressive gases, safe alternatives were researched. Inicially, ghe residue in incineration was performed in cement ovens with precise control ofe emission of gases, but it was proved inviable due to its low calorific power, as well as the liberation of free lead in the ashes. An original and feasible option was the residue confinemente in soil-ciment blocks, lohich resulted in blocks highly resistant to simple compression with structural block, and also a significant increase in thermal resistence. Was got up other options of original and important composites as: making of blocks for pré-moulded flagstone, internal coating of walls with plaster being obtained good texture results, replenish of ceramic blocks and blocks with cement, also implying in increase of thermal resistance. Besides these original and scientific contributions, the it was technologically contribution of defreadation with suggestions of the material using torch of thermal plasm; for this was projected, built, characterized and tested a torch to it shapes it being obtained exciting results for the development of this technology come back for ending destruction from all the types of inconvenient garbage to the atmosphere

Reforma a seco de metano com catalisadores Ni/MCM-41 sintetizados a partir de fontes alternativas de sílica

The production of synthesis gas has received renewed attention due to demand for renewable energies to reduce the emissions of gases responsible for enhanced greenhouse effect. This work was carried out in order to synthesize, characterize and evaluate the implementation of nickel catalysts on MCM-41 in dry reforming reactions of methane. The mesoporous molecular sieves were synthesized using as silica sources the tetraethyl orthosilicate (TEOS) and residual glass powder (PV). The sieves were impregnated with 10% nickel to obtain the metallic catalysts (Ni/MCM-41). These materials were calcined and characterized by Thermogravimetric Analysis (TG), Infrared spectroscopy (FTIR), X-ray Diffraction (XRD), Temperature-Programmed Reduction (TPR) and N2 Adsorption/Desorption isotherms (BET/BJH). The catalytic properties of the samples were evaluated in methane dry reforming with CO2 in order to produce synthesis gas to be used in the petrochemical industry. The materials characterized showed hexagonal structure characteristic of mesoporous material MCM-41 type, being maintained after impregnation with nickel. The samples presented variations in the specific surface area, average volume and diameter of pores based on the type of interaction between the nickel and the mesoporous support. The result of the the catalytic tests showed conversions about 91% CO2, 86% CH4, yelds about 85% CO and 81% H2 to Ni/MCM-41_TEOS_C, and conversions about 87% CO2, 82% CH4, yelds about 70% CO and 59% H2 to Ni/MCM-41_PV_C. The similar performance confirms that the TEOS can be replaced by a less noble materials

Desenvolvimento de metodologias analíticas alternativas por cromatografia gasosa para análise de biodiesel

Since the beginning of the National Program for Production and Use of Biodiesel in Brazil, in 2004, different raw materials were evaluated for biodiesel production, trying to combine the agricultural diversity of the country to the desire to reduce production coasts. To determine the chemical composition of biodiesel produced from common vegetables oils, international methods have been used widely in Brazil. However, for analyzing biodiesel samples produced from some alternative raw materials analytical problems have been detected. That was the case of biodiesel from castor oil. Due the need to overcome these problems, new methodologies were developed using different chromatographic columns, standards and quantitative methods. The priority was simplifying the equipment configuration, realizing faster analyses, reducing the costs and facilitating the routine of biodiesel research and production laboratories. For quantifying free glycerin, the ethylene glycol was used in instead of 1,2,4-butanetriol, without loss of quality results. The ethylene glycol is a cheaper and easier standard. For methanol analyses the headspace was not used and the cost of the equipment used was lower. A detailed determination of the esters helped the deeper knowledge of the biodiesel composition. The report of the experiments and conclusions of the research that resulted in the development of alternative methods for quality control of the composition of the biodiesel produced in Brazil, a country with considerable variability of species in agriculture, are the goals of this thesis and are reported in the following pages

A arte de si: uma análise da ascese nas comunidades alternativas

In this research, we studied alternative communities that promote self-care practices, as well as environmental and community care.We problematized if there are ascetical practices in these communities - understanding asceticism from Ortega (2008) and Foucault (2006, 2009, 1998), which would be a transition from one type of subjectivity to another one to be achieved through exercises on itself, in other words, the ascetic oscillates between a refused identity to another to be drawn by an art that focuses itlself.This research was conducted through the analysis of files, observations of daily practices and interviews with open questions in order to achieve reflections and thoughts of the residents of alternative communities.For our study, we chose the Alternative Community of Campina, located in the Capon Valley/Bahia; Sabiaguaba community, located in Fortaleza-CE; and the National Meeting of Alternative Communities (ENCA). The research points to ways of living that create new subjectivities, in which the subject feels responsible for taking care of themselves, others and the environment

Direito fundamental à saúde: parâmetros e alternativas para sua concretização no Brasil

If, on one hand, only with the 1988 Federal Constitution the right to health began to receive the treatment of authentic fundamental social right; on the other, it is certain since then, the level of concretization reached as to such right depicts a mismatch between the constitutional will and the will of the rulers. That is because, despite the inherent gradualness of the process of concretization of the fundamental social rights, the Brazilian reality, marked by a picture of true chaos on public health routinely reported on the evening news, denatures the priority status constitutionally drew for the right to health, demonstrating, thus, that there is a clear deficit in this process, which must be corrected. This concern regarding the problem of the concretization of the social rights, in turn, is underlined when one speaks of the right to health, since such right, due to its intimate connection with the right to life and human dignity, ends up assuming a position of primacy among the social rights, presenting itself as an imperative right, since its perfect fruition becomes an essential condition for the potential enjoyment of the remaining social rights. From such premises, this paper aims to provide a proposal for the correction of this problem based upon the defense of an active role of the Judiciary in the concretization of the right to health as long as grounded to objective and solid parameters that come to correct, with legal certainty, the named deficit and to avoid the side effects and distortions that are currently beheld when the Judiciary intends to intervene in the matter. For that effect, emerges as flagship of this measure a proposition of an existential minimum specific to the right to health that, taking into account both the constitutionally priority points relating to this relevant right, as well as the very logic of the structuring of the Sistema Único de Saúde - SUS inserted within the core of the public health policies developed in the country, comes to contribute to a judicialization of the subject more in alignment with the ideals outlined in the 1988 Constitution. Furthermore, in the same intent to seek a concretization of the right to health in harmony with the constitutional priority inherent to this material right, the research alerts to the need to undertake a restructuring in the form of organization of the Boards of Health in order to enforce the constitutional guideline of SUS community participation, as well as the importance of establishing a new culture budget in the country, with the Constitution as a compass, pass accurately portray a special prioritization directed constitutional social rights, especially the right to health

Redução de aplicações de inseticidas através da adoção de táticas de manejo integrado do Triozoida limbata (Enderlein, 1918) (Hemiptera: triozidae) em goiabeira

The guava tree pest that has been requesting larger control frequency, in the area of Jaboticabal - São Paulo in the last years, is the psilideo Triozoida limbata. Thus, the objectives of this research were: a) Compare control tactics T. limbata based on monitoring and selectivity of insecticide to decrease the applications; b) To register and to correlate the natural enemies in habitants in guava tree ecosystem with the key pest and with meteorological factors; c) See if the control of T. limbata affects the population of fruit flies and d) To verify the efficiency of appropriate insecticides to IMP, in control of T. limbata. The experiment was conducted in 2004, in an orchard of Paluma cultivar in Vista Alegre do Alto, SP. The used strategies were (doses in g.a.i./100L water): control; imidacloprid + beta-cyfluthrin (2.5 + 0.3); acetamiprid (4.0); fenpropathrin (15.0) and regional conventional treatment. It was concluding that is possible to reduce the number of applications of less aggressive insecticides to the environment and the man, with the adoption of monitoring of T. limbata and implementing the action level. The natural enemies' populations densities (Scymnus spp., Cycloneda sanguinea, Azia luteipes, Crysoperla spp., Polybia spp., Brachygastra ssp.) present positive correlations with the populations of T. limbata. Population fluctuations of T. limbata and natural enemies are not altered by meteorological factors (precipitation and temperature) in irrigated orchard. The population of Anastrepha spp. is minimized when of the applications is for control T. limbata. The insecticides imidacloprid, imidacloprid + beta-cyfluthrin, acetamiprid and fenpropathrin are efficient in the control of T. limbata.

Fontes alternativas e doses de nitrogênio no milho safrinha em sucessão à soja

A produtividade do milho safrinha pode ser aumentada com a adubação nitrogenada em cobertura mesmo quando cultivado em sucessão à soja. No entanto, existem inconsistências dos resultados especialmente quanto às fontes e doses a serem empregadas nessa modalidade de cultivo. Com o objetivo de avaliar o efeito de fontes e doses de nitrogênio em cobertura no milho safrinha, cultivado após soja no sistema plantio direto, conduziu-se o experimento em um Latossolo Vermelho distrófico, em Chapadão do Céu (GO). O delineamento experimental foi o de blocos ao acaso, em esquema fatorial 4 x 4, com quatro repetições. Os tratamentos foram constituídos pela combinação de quatro fontes (uréia, sulfato de amônio, uréia extrusada com produtos amiláceos (Amiréia® 180S) e sulfonitrato de amônio com inibidor de nitrificação (Entec® 26)) e quatro doses de nitrogênio (0; 30; 60 e 120 kg ha-1). A interação fonte x dose não foi significativa para nenhuma das variáveis avaliadas. A aplicação de nitrogênio na forma de entec proporcionou maiores teores de nitrogênio na folha do milho safrinha que o sulfato de amônio e a amiréia. A produtividade de grãos do milho safrinha foi maior quando o nitrogênio em cobertura foi fornecido na forma de sulfato de amônio, em comparação com a amiréia. A aplicação de nitrogênio em cobertura aumentou os teores de nitrogênio e enxofre na folha, altura da planta, diâmetro do colmo, número de espigas por planta e grãos por espiga, massa de 1.000 grãos e produtividade de grãos do milho safrinha, em sucessão à soja, independentemente da fonte utilizada.

Novas alternativas de remoção de enxofre do óleo diesel utilizando tensoativos e microemulsões

The diesel combustion form sulfur oxides that can be discharged into the atmosphere as particulates and primary pollutants, SO2and SO3, causing great damage to the environment and to human health. These products can be transformed into acids in the combustion chamber, causing damage to the engines. The worldwide concern with a clean and healthy environment has led to more restrictive laws and regulations regulating the emission levels of pollutants in the air, establishing sulfur levels increasingly low on fuels. The conventional methods for sulfur removal from diesel are expensive and do not produce a zero-level sulfur fuel. This work aims to develop new methods of removing sulfur from commercial diesel using surfactants and microemulsion systems. Its main purpose is to create new technologies and add economic viability to the process. First, a preliminary study using as extracting agent a Winsor I microemulsion system with dodecyl ammonium chloride (DDACl) and nonyl phenol ethoxylated (RNX95) as surfactant was performed to choose the surfactant. The RNX95 was chosen to be used as surfactant in microemulsioned systems for adsorbent surface modification and as an extracting agent in liquid-liquid extraction. Vermiculite was evaluated as adsorbent. The microemulsion systems applied for vermiculite surface modification were composed by RNX95 (surfactant), n-butanol (cosurfactant), n-hexane (oil phase), and different aqueous phases, including: distilled water (aqueous phase),20ppm CaCl2solution, and 1500ppm CaCl2solution. Batch and column adsorption tests were carried out to estimate the ability of vermiculite to adsorb sulfur from diesel. It was used in the experiments a commercial diesel fuel with 1,233ppm initial sulfur concentration. The batch experiments were performed according to a factorial design (23). Two experimental sets were accomplished: the first one applying 1:2 vermiculite to diesel ratio and the second one using 1:5 vermiculite to diesel ratio. It was evaluated the effects of temperature (25°C and 60°C), concentration of CaCl2in the aqueous phase (20ppm and 1500ppm), and vermiculite granule size (65 and 100 mesh). The experimental response was the ability of vermiculite to adsorb sulfur. The best results for both 1:5 and 1:2 ratios were obtained using 60°C, 1500ppm CaCl2solution, and 65 mesh. The best adsorption capacities for 1:5 ratio and for 1:2 ratio were 4.24 mg sulfur/g adsorbent and 2.87 mg sulfur/g adsorbent, respectively. It was verified that the most significant factor was the concentration of the CaCl2 solution. Liquid-liquid extraction experiments were performed in two and six steps using the same surfactant to diesel ratio. It was obtained 46.8% sulfur removal in two-step experiment and 73.15% in six-step one. An alternative study, for comparison purposes, was made using bentonite and diatomite asadsorbents. The batch experiments were done using microemulsion systems with the same aqueous phases evaluated in vermiculite study and also 20ppm and 1500 ppm BaCl2 solutions. For bentonite, the best adsorption capacity was 7.53mg sulfur/g adsorbent with distilled water as aqueous phase of the microemulsion system and for diatomite the best result was 17.04 mg sulfur/g adsorbent using a 20ppm CaCl2solution. The accomplishment of this study allowed us to conclude that, among the alternatives tested, the adsorption process using adsorbents modified by microemulsion systems was considered the best process for sulfur removal from diesel fuel. The optimization and scale upof the process constitutes a viable alternative to achieve the needs of the market

Citologia: uma proposta formativa na EaD - UFRN a partir de concepções alternativas

Learning difficulties can have a direct influence on the teaching-learning process of students by reducing their school performance. One factor that may contribute to this negative influence on learning refers to the presence of alternative conceptions, which may have different origins in the educational process. It is of paramount importance, for teachers, for example, to identify the concepts and the difficulties of their students in order for that knowledge can be able to contribute significantly to improve the teaching and learning process. From the following considerations, the present study (still in progress) aims to investigate aspects related to the concepts and difficulties of graduating students in relation to the contents of Biology. The participants of the research were undergraduate students in Biological Sciences from UFRN, studying by Distance Learning (Educação a Distância). To develop the survey, questionnaires were developed to identify the contents in Biology that these students have more difficulties as well as an interview to raise misconceptions regarding the content of cytology. Another tool developed was a textbook evaluation form, which was applied in conjunction with a questionnaire in workshops (short courses) in order to identify possible errors and mistakes that could jeopardize the process of teaching and learning, such as the importance that these learners assign to textbooks in the educational process. From the data collected, a booklet on the content of cytology was developed as a product. It is expected that it can be applied in classrooms in order to improve the teaching and learning in references to Biology, to minimize, for example, alternative conceptions than can occur related to the theme

A fotossíntese vegetal no 3º ano do Ensino médio: concepções alternativas, erros conceituais e uma proposta de unidade didática baseada no Desenvolvimento Sustentável.

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Controvérsias do desenvolvimento dos assentamentos rurais em São Paulo: produção para os biocombustíveis e as alternativas de programas municipais

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estendendo CRefine para o suporte de táticas de refinamento

The use of increasingly complex software applications is demanding greater investment in the development of such systems to ensure applications with better quality. Therefore, new techniques are being used in Software Engineering, thus making the development process more effective. Among these new approaches, we highlight Formal Methods, which use formal languages that are strongly based on mathematics and have a well-defined semantics and syntax. One of these languages is Circus, which can be used to model concurrent systems. It was developed from the union of concepts from two other specification languages: Z, which specifies systems with complex data, and CSP, which is normally used to model concurrent systems. Circus has an associated refinement calculus, which can be used to develop software in a precise and stepwise fashion. Each step is justified by the application of a refinement law (possibly with the discharge of proof obligations). Sometimes, the same laws can be applied in the same manner in different developments or even in different parts of a single development. A strategy to optimize this calculus is to formalise these application as a refinement tactic, which can then be used as a single transformation rule. CRefine was developed to support the Circus refinement calculus. However, before the work presented here, it did not provide support for refinement tactics. The aim of this work is to provide tool support for refinement tactics. For that, we develop a new module in CRefine, which automates the process of defining and applying refinement tactics that are formalised in the tactic language ArcAngelC. Finally, we validate the extension by applying the new module in a case study, which used the refinement tactics in a refinement strategy for verification of SPARK Ada implementations of control systems. In this work, we apply our module in the first two phases of this strategy

Evolução morfodinâmica da região de influência estuarina do Rio Curimataú/RN, com ênfase nas alternativas do ambiente deposicional de manguezal e a integração de geodados em Sig

The estuaries are important investigation zones of the actual morphodynamic and of depositional facies of recent geological history. They are constituted in important receptor means of the coastal area sediments, where the evolutionary processes occur quickly. They are also attractive means for the development of anthropic activities, which in a disordered way interfere in the active processes in the sedimentary balance of the coastal areas. Among the human interventions, the alterations of the depositional environment of mangroves in areas of tropical estuary is deserving relevance, whose implications for the environment estuarine and the coastal adjacent, they are still far to be known. Due to the interest of the sedimentologic component in the comprehension of the processes linked to the evolution of the environments estuarine and coastal adjacent, this work, aimed at the understanding of the morphodynamic coastal phenomena that comprise the region of estuarine influence of the River Curimataú / RN. It was also evaluated in the morphodynamic context the implications due to alterations of the depositional environment of mangrove by anthropic activity. The Curimataú Estuary, located in the south portion of the oriental coast of Rio Grande do Norte, in the last decades has been objective of the overwhelming occupation of the shrimp farm in areas of mangroves, which were implanted with perspectives of development in a short to medium period. On the other hand, the estuary and its region of coastal influence lacks enough information to subsidize the planning and reorganization more effective of the surrounding activities. Thus, it was intended with this work to give a contribution target tothe maintainable use of the coastal resources of this region. A series of studies using data of orbital and acoustic remote sensing, as of sediments sampling, were executed in the gutter of the estuary. The obtained results starting from the interpretation of bathymetric maps, echo sounder graphics and of distribution of sediments made possible the location of the estuary based in morpho-sedimentar criteria. The estuarine tidal flat was dissected in environments of intertidal mangroves, supratidal mangroves and apicuns with base in the integration of data of sensor optic and of radar following by the field control. The adjacent coast that is influenced by the Curimataú estuary, was segmented according to their geomorphologic characteristics, where each segment had a point of observation of the beach morphodynamic, during the period from january/2001 to february/2002. Once every month, beaches profiles, collections of sediments in the beach zones, as measurement of hydrodynamic parameters were executed. The results of the observations of the tidal environment showed that the area of estuarine influence of the Curimataú begins to suffer negative sedimentary taxes, where in some beaches, the erosive processes are already observed. The granulometric characteristics of the beach sediments start to tend for the increase of thin sand in the erosive periods. The destruction of the depositional environments of mangroves of the Curimataú estuary, to the construction of shrimp farms, can be providing the diminution of the tidal prism of the estuary, enlarging the effects of the local increasing of the sea level, through the smaller supplying of sediments to the adjacent coast. Besides this, it was verified the possibility of the sanding of the tidal channel in the margins of the destroyed areas of mangroves, where very high taxes of sedimentation of thin materials were estimated in case of these areas were preserve

A erosão costeira e sua influência sobre a atividade petrolífera: alternativas sustentáveis na mitigação de impactos ambientais

The study area consist in high sensitivity environments located on the northern coast of Rio Grande do Norte, Northeast Brazil. The barrier island are the main geomorphological features on the coastal landscape, being naturally instable and surrounded by industrial activities like oil fields, salt industry, shrimp farms and urban areas sometimes installed parallel to the coast, combined with coast engineering interventions. High energy hydrodynamic process are responsible for the morphological instability of the coast. The study was based on remote sensing data obtained between 1954 and 2007 which consist in orbital images from Landsat, CBERS and Ikonos satellites and aerial photos. With all data integrated on GIS environment it was possible to update thematic maps of geology, geomorphology, vegetation, soil and landuse and development of multitemporal maps pointing areas with erosion and depositions of sediments, defining the critical erosion process on this region. The bigger morphological changes are related to changes on wind patterns during the year, terrestrial and sea breezes during the day, with spits and barrier island migration, opening and closing of channels like the one parallel to the coast on the area of Serra and Macau oil fields. These factors combined with the significant reduction on sediment budgets due to the loss of natural spaces to sediment reworking contribute to the low resilience which tends to be growing on the area of Serra and Macau oil fields. In front of such scenery a detailed monitoring was done in order to find technological possibilities for coastal restoration. A pilot area was defined to start the project of mangrove restore together with beach nourishment in order to minimize the effect of the erosion caused by the channel parallel to the coast, contributing to stabilize the northeast channel as the main one. It s expected that such methodology will aid the coastal environments restoration and the balance between industrial activities and coastal erosion

Desempenho ponderal de bovinos Nelore suplementados com fontes alternativas de fósforo

O desempenho produtivo e a possível interferência do flúor sobre a saúde dos animais foram investigados em bovinos Nelore suplementados, por 866 dias, com distintas fontes alternativas de fósforo com diferentes relações fósforo:fluor (P:F). Os tratamentos experimentais foram: Controle negativo (CONTNEG, sem qualquer suplementação com P), fosfato bicálcico (FB 120:1, FB 30:1 e FB 10:1), fosfato monobicálcico (FMBC 60:1), superfosfato triplo (SFT 30:1) e fosfato de rocha de Cajati (FR 10:1). Foram utilizados 49 novilhos, desmamados aos oito meses de idade, castrados e com 230 kg de peso médio, distribuídos em sete piquetes com água e mistura mineral formulada sem P. A dieta padrão foi feita com bagaço de cana (0,03% de P) como volumoso e um concentrado contendo 0,239 % de P oferecido na base de 1% do peso dos animais para permitir um ganho de peso aproximado de 0,50 kg/dia. Até o dia 134, não houve diferença estatística entre os diversos lotes, inclusive para o tratamento CONTNEG, que não recebeu fósforo suplementar na dieta e ganhou 71,6 kg de peso ou 0,633 kg/dia. Após 866 dias de confinamento (2,37 anos), os animais suplementados com o fosfato bicálcico padrão (120:1) ganharam menos peso que os suplementados com as fontes FMCB 60:1, FB 30:1 e SFT 30:1. Até um ano de suplementação fosfórica com fosfato bicálcico padrão (120:1) artificialmente fluoretado com NaF ou com o fosfato de rocha não se detectou danos à saúde ou ao ganho de peso dos animais. As análises de fósforo nos ossos mostraram diferença estatística apenas entre o tratamento CONTNEG e os que tinham fosfato bicálcico. As concentrações de flúor nos ossos se mostraram intimamente associadas à quantidade de flúor disponível nas fontes utilizadas. Conforme a proporção P:F na dieta foi diminuindo, características relacionadas à fluorose dentária ficaram mais evidentes, sendo que os animais que receberam fontes com relação 10:1, apresentaram, ao final do experimento, dentes incisivos permanentes mal formados, quebradiços e com manchas esbranquiçadas.