Market analysis and consumer impacts source document. Part III: consumer behavior and attitudes toward fuel efficient vehicles. Final report.

National Highway Traffic Safety Administration, Office of Research and Development, Washington, D.C.

Code pattern analysis of object-oriented programming languages

Code patterns, including programming patterns and design patterns, are good references for programming language feature improvement and software re-engineering. However, to our knowledge, no existing research has attempted to detect code patterns based on code clone detection technology. In this study, we build upon the previous work and propose to detect and analyze code patterns from a collection of open source projects using NiPAT technology. Because design patterns are most closely associated with object-oriented languages, we choose Java and Python projects to conduct our study. The tool we use for detecting patterns is NiPAT, a pattern detecting tool originally developed for the TXL programming language based on the NiCad clone detector. We extend NiPAT for the Java and Python programming languages. Then, we try to identify all the patterns from the pattern report and classify them into several different categories. In the end of the study, we analyze all the patterns and compare the differences between Java and Python patterns.

Analysis of source-follower buffers implemented with graded-channel SOI nMOSFETs operating at cryogenic temperatures

This work studies the operation of source-follower buffers implemented with standard and graded-channel (GC) fully depleted (FD) SCI nMOSFETs at low temperatures. The analysis is performed by comparing the voltage gain of buffers implemented with GC and standard SOI nMOS transistors considering devices with the same mask channel length and same effective channel length. It is shown that the use of GC devices allows for achieving improved gain in all inversion levels in a wide range of temperatures. In addition, this improvement increases as temperature is reduced. It is shown that GC transistors can provide virtually constant gain, while for standard devices, the gain departs from the maximum value depending on the temperature and inversion level imposed by the bias current and input voltage. Two-dimensional numerical simulations were performed in order to study the reasons for the enhanced gain of GC MOSFETs at low temperatures. (C) 2009 Elsevier Ltd. All rights reserved.

Entropy analysis of DNA code dynamics in human chromosomes

Deoxyribonucleic acid, or DNA, is the most fundamental aspect of life but present day scientific knowledge has merely scratched the surface of the problem posed by its decoding. While experimental methods provide insightful clues, the adoption of analysis tools supported by the formalism of mathematics will lead to a systematic and solid build-up of knowledge. This paper studies human DNA from the perspective of system dynamics. By associating entropy and the Fourier transform, several global properties of the code are revealed. The fractional order characteristics emerge as a natural consequence of the information content. These properties constitute a small piece of scientific knowledge that will support further efforts towards the final aim of establishing a comprehensive theory of the phenomena involved in life.

Shannon information and power law analysis of the chromosome code

This paper studies the information content of the chromosomes of twenty-three species. Several statistics considering different number of bases for alphabet character encoding are derived. Based on the resulting histograms, word delimiters and character relative frequencies are identified. The knowledge of this data allows moving along each chromosome while evaluating the flow of characters and words. The resulting flux of information is captured by means of Shannon entropy. The results are explored in the perspective of power law relationships allowing a quantitative evaluation of the DNA of the species.

Shannon entropy analysis of the genome code

This paper studies the chromosome information of twenty five species, namely, mammals, fishes, birds, insects, nematodes, fungus, and one plant. A quantifying scheme inspired in the state space representation of dynamical systems is formulated. Based on this algorithm, the information of each chromosome is converted into a bidimensional distribution. The plots are then analyzed and characterized by means of Shannon entropy. The large volume of information is integrated by averaging the lengths and entropy quantities of each species. The results can be easily visualized revealing quantitative global genomic information.

Multi-elemental analysis of ready-to-eat “baby leaf” vegetables using microwave digestion and high-resolution continuum source atomic absorption spectrometry

The mineral content (phosphorous (P), potassium (K), sodium (Na), calcium (Ca), magnesium (Mg), iron (Fe), manganese (Mn), zinc (Zn) and copper (Cu)) of eight ready-to-eat baby leaf vegetables was determined. The samples were subjected to microwave-assisted digestion and the minerals were quantified by High-Resolution Continuum Source Atomic Absorption Spectrometry (HR-CS-AAS) with flame and electrothermal atomisation. The methods were optimised and validated producing low LOQs, good repeatability and linearity, and recoveries, ranging from 91% to 110% for the minerals analysed. Phosphorous was determined by a standard colorimetric method. The accuracy of the method was checked by analysing a certified reference material; results were in agreement with the quantified value. The samples had a high content of potassium and calcium, but the principal mineral was iron. The mineral content was stable during storage and baby leaf vegetables could represent a good source of minerals in a balanced diet. A linear discriminant analysis was performed to compare the mineral profile obtained and showed, as expected, that the mineral content was similar between samples from the same family. The Linear Discriminant Analysis was able to discriminate different samples based on their mineral profile.

Cochineal, a precious source of red: cochineal dyes characterization by high performance liquid chromatography with diode array detection and principal component analysis

Presented at Faculdade de Ciências e Tecnologias, Universidade de Lisboa, to obtain the Master Degree in Conservation and Restoration of Textiles

Interictal Spike EEG Source Analysis in Hypothalamic Hamartoma Epilepsy

Objective: The epilepsy associated with the hypothalamic hamartomas constitutes a syndrome with peculiar seizures, usually refractory to medical therapy, mild cognitive delay, behavioural problems and multifocal spike activity in the scalp electroencephalogram (EEG). The cortical origin of spikes has been widely assumed but not specifically demonstrated. Methods: We present results of a source analysis of interictal spikes from 4 patients (age 2–25 years) with epilepsy and hypothalamic hamartoma, using EEG scalp recordings (32 electrodes) and realistic boundary element models constructed from volumetric magnetic resonance imaging (MRIs). Multifocal spike activity was the most common finding, distributed mainly over the frontal and temporal lobes. A spike classification based on scalp topography was done and averaging within each class performed to improve the signal to noise ratio. Single moving dipole models were used, as well as the Rap-MUSIC algorithm. Results: All spikes with good signal to noise ratio were best explained by initial deep sources in the neighbourhood of the hamartoma, with late sources located in the cortex. Not a single patient could have his spike activity explained by a combination of cortical sources. Conclusions: Overall, the results demonstrate a consistent origin of spike activity in the subcortical region in the neighbourhood of the hamartoma, with late spread to cortical areas.

EFFECT – Efficient finite element code

The theme of this dissertation is the finite element method applied to mechanical structures. A new finite element program is developed that, besides executing different types of structural analysis, also allows the calculation of the derivatives of structural performances using the continuum method of design sensitivities analysis, with the purpose of allowing, in combination with the mathematical programming algorithms found in the commercial software MATLAB, to solve structural optimization problems. The program is called EFFECT – Efficient Finite Element Code. The object-oriented programming paradigm and specifically the C ++ programming language are used for program development. The main objective of this dissertation is to design EFFECT so that it can constitute, in this stage of development, the foundation for a program with analysis capacities similar to other open source finite element programs. In this first stage, 6 elements are implemented for linear analysis: 2-dimensional truss (Truss2D), 3-dimensional truss (Truss3D), 2-dimensional beam (Beam2D), 3-dimensional beam (Beam3D), triangular shell element (Shell3Node) and quadrilateral shell element (Shell4Node). The shell elements combine two distinct elements, one for simulating the membrane behavior and the other to simulate the plate bending behavior. The non-linear analysis capability is also developed, combining the corotational formulation with the Newton-Raphson iterative method, but at this stage is only avaiable to solve problems modeled with Beam2D elements subject to large displacements and rotations, called nonlinear geometric problems. The design sensitivity analysis capability is implemented in two elements, Truss2D and Beam2D, where are included the procedures and the analytic expressions for calculating derivatives of displacements, stress and volume performances with respect to 5 different design variables types. Finally, a set of test examples were created to validate the accuracy and consistency of the result obtained from EFFECT, by comparing them with results published in the literature or obtained with the ANSYS commercial finite element code.

The use of forensic polycyclic aromatic hydrocarbon signatures and Compound Ratio Analysis Techniques (CORAT) for the source characterisation of petrogenic/pyrogenic environmental releases.

This study utilised recent developments in forensic aromatic hydrocarbon fingerprint analysis to characterise and identify specific biogenic, pyrogenic and petrogenic contamination. The fingerprinting and data interpretation techniques discussed include the recognition of: The distribution patterns of hydrocarbons (alkylated naphthalene, phenanthrene, dibenzothiophene, fluorene, chrysene and phenol isomers), • Analysis of “source-specific marker” compounds (individual saturated hydrocarbons, including n-alkanes (n-C5 through 0-C40) • Selected benzene, toluene, ethylbenzene and xylene isomers (BTEX), • The recalcitrant isoprenoids; pristane and phytane and • The determination of diagnostic ratios of specific petroleum / non-petroleum constituents, and the application of various statistical and numerical analysis tools. An unknown sample from the Irish Environmental Protection Agency (EPA) for origin characterisation was subjected to analysis by gas chromatography utilising both flame ionisation and mass spectral detection techniques in comparison to known reference materials. The percentage of the individual Polycyclic Aromatic Hydrocarbons (PAIIs) and biomarker concentrations in the unknown sample were normalised to the sum of the analytes and the results were compared with the corresponding results with a range of reference materials. In addition, to the determination of conventional diagnostic PAH and biomarker ratios, a number of “source-specific markers” isomeric PAHs within the same alkylation levels were determined, and their relative abundance ratios were computed in order to definitively identify and differentiate the various sources. Statistical logarithmic star plots were generated from both sets of data to give a pictorial representation of the comparison between the unknown sample and reference products. The study successfully characterised the unknown sample as being contaminated with a “coal tar” and clearly demonstrates the future role of compound ratio analysis (CORAT) in the identification of possible source contaminants.

Analysis and removal of code clones in software product lines

Magdeburg, Univ., Fak. für Informatik, Diss., 2013

Analysis of the regulation of Nodal function by SPC-mediated cleavage during early mammalian development

RÉSUMÉ Après implantation dans l'utérus, le foetus de mammifère est composé de trois populations différentes de cellules: l'epiblast, l'ectoderme extraembryonnaire et l'endoderme viscéral. Pendant la gastrulation, les cellules de l'epiblast donnent naissance aux trois lignées germinales: l'ectoderme, le mésoderme et l'endodermes. Les lignées germinales produisent par la suite les différents tissus et organes du corps embryonnaire et adulte. Les cellules de l'ectoderme extraembryonnaire donnent par la suite le composant foetal du placenta qui est essentiel à la survie de l'embryon dans l'utérus. L'épiblast et l'ectoderme extraembryonnaire sont entourés par l'endoderme viscéral et forment une structure connue sous le nom de bouton embryonnaire. L'endoderme viscéral joue un rôle important dans l'embryogenèse car il comporte une sous-population de cellules appelées l'endoderme viscéral antérieur dont les signaux influencent l'épiblast adjacent et déterminent le futur axe antéro-postérieur de l'embryon. La protéine de signalisation Nodal de la famille des TGFß est essentielle dans l'épiblast pour spécifier le mésendoderme, l'endoderme viscéral antérieur, ainsi que pour maintenir les cellules souche de l'ectoderme extraembryonnaire. Ainsi, dans les embryons mutants pour Nodal, aucun axe antéro-postérieur n'est établi, les lignées germinales ne sont pas spécifiés et le placenta ne se développe pas. Au niveau moléculaire, comme pour les protéines de la famille des TGFß, Nodal est initialement synthétisée sous forme de précurseur avant d'être clivée de façon endoproteolytique par des protéanes sécrétées, les proprotéines convertases du type subtilisin (SPC), qui suppriment la partie inhibitrice N-terminale du pro peptide. Dans ce contexte, le projet de ma thèse a été d'analyser l'influence des SPC sur la fonction de Nodal en employant une combinaison d'approches génétiques et biochimiques. Premièrement, nous avons constaté que le clivage du précurseur par les protéases active Nodal, mais en même temps augmente son turn-over et diminue la portée de son action. Deuxièmement, dans l'embryon, il apparaît que Nodal est activé par l'action combinée de Furin et de PACE4, deux protéases sécrétées qui sont spécifiquement exprimées dans les cellules de l'ectoderme extraembryonnaire, donc adjacentes au domaine d'expression de Nodal. De manière similaire aux mutants de Nodal, les embryons mutants pour les deux protéases ne forment pas d'endoderme viscéral antérieur et ne gastrulent pas. Cependant, certains gènes cible de Nodal restent exprimés, suggérant que toutes les activités de Nodal ne sont pas dépendent du clivage par les SPCs. En effet, la génération et l'analyse de mutants portant un allèle knock-in qui code pour une forme mutante de Nodal résistante aux SPC, ont montré que ces mutants ont les caractères phénotypique des mutants de Nodal seulement de façon partielle. La formation de mésoderme est partiellement induite, et de façon remarquable, la forme de Nodal résistante aux SPC est capable d'agir à une distance de sa source, maintenant l'expression de ses propres protéases et d'autres gènes essentiels pour la spécification de l'ectoderme extraembryonnaire. Ensemble, ces résultats prouvent que par leur action directe les protéases extraembryonnaire modulent la signalisation de Nodal pendant le développement mammifère précoce. SUMMARY : Early after implantation in the uterus, the mammalian conceptus is composed of three different cell populations: the epiblast, the extraembryonic ectoderm and the visceral endoderm. During gastrulation, epiblast cells give rise to the three embryonic germ layers: the ectoderm, the mesoderm and the endoderm. These germ layers then generate the different tissues and organs of the embryonic and adult bodies. In parallel, extraembryonic ectoderm cells give rise to the fetal component of the placenta, which is essential for the survival of the embryo in the uterus. Both the epiblast and extraembryonic ectoderm are surrounded by the visceral endoderm to form a structure known as the egg cylinder. The visceral endoderm plays an important role as it harbours a subpopulation of cells called the anterior visceral endoderm, from which signals influence the adjacent epiblast and determine the future antero-posterior embryonic axis. The TGFß-related signalling protein Nodal is required within the epiblast to specify the mesoderm, the endoderm,the anterior visceral endoderm and is also essential to maintain stem cells in the extraembryonic ectoderm. Thus, in Nodal null conceptuses, no antero-posterior axis is established, the germ layers are not specified and the placenta does not develop. At the molecular level, Nodal, like related proteins of the TGFß family, is initially synthesized as a precursor and undergoes endoproteolytic cleavage by secreted proteases of the subtilisin-like proprotein convertases (SPC) to remove an inhibitory N-terminal pro peptide. In the embryo, Nodal is activated by the combined action of Furin and PACE4, two secreted SPCs that are specifically expressed in cells of the extraembryonic ectoderm, thus adjacent to the Nodal expression domain. Similar to Nodal null .embryos, mutant embryos lacking both these proteases fail to specify the anterior visceral endoderm and to undergo gastrulation. However, these mutants still express a subset of Nodal target genes, suggesting that part of Nodal activity is independent on cleavage by SPCs. Indeed, by generating and analyzing mutants with a knock-in allele that encodes an SPC-resistant mutant form of Nodal, I could show that they retain a subset of Nodal activities. Mesoderm formation is partially induced, but most remarkably, SPC-resistant Nodal form is able to act at a distance from its source, maintaining the expression of its proteases and of other genes essential for maintenance of the extraembryonic ectoderm.

Embolic strokes of undetermined source in the athens stroke registry: a descriptive analysis.

BACKGROUND AND PURPOSE: A new clinical construct termed embolic stroke of undetermined source (ESUS) was recently introduced, but no such population has been described yet. Our aim is to provide a detailed descriptive analysis of an ESUS population derived from a large prospective ischemic stroke registry using the proposed diagnostic criteria. METHODS: The criteria proposed by the Cryptogenic Stroke/ESUS International Working Group were applied to the Athens Stroke Registry to identify all ESUS patients. ESUS was defined as a radiologically confirmed nonlacunar brain infarct in the absence of (a) extracranial or intracranial atherosclerosis causing ≥50% luminal stenosis in arteries supplying the ischemic area, (b) major-risk cardioembolic source, and (c) any other specific cause of stroke. RESULTS: Among 2735 patients admitted between 1992 and 2011, 275 (10.0%) were classified as ESUS. In the majority of ESUS (74.2%), symptoms were maximal at onset. ESUS were of moderate severity (median National Institute Health Stroke Scale score, 5). The most prevalent risk factor was arterial hypertension (64.7%), and 50.9% of patients were dyslipidemic. Among potential causes of the ESUS, covert atrial fibrillation (AF) was the most prevalent: in 30 (10.9%) patients, AF was diagnosed during hospitalization for stroke recurrence, whereas in 50 (18.2%) patients AF was detected after repeated ECG monitoring during follow-up. Also, covert AF was strongly suggested in 38 patients (13.8%) but never recorded. CONCLUSIONS: About 10% of patients with first-ever ischemic stroke met criteria for ESUS; covert paroxysmal AF seems to be a frequent cause of ESUS.

Identification of potential rockfall source areas at a regional scale using a DEM-based geomorphometric analysis

The availability of high resolution Digital Elevation Models (DEM) at a regional scale enables the analysis of topography with high levels of detail. Hence, a DEM-based geomorphometric approach becomes more accurate for detecting potential rockfall sources. Potential rockfall source areas are identified according to the slope angle distribution deduced from high resolution DEM crossed with other information extracted from geological and topographic maps in GIS format. The slope angle distribution can be decomposed in several Gaussian distributions that can be considered as characteristic of morphological units: rock cliffs, steep slopes, footslopes and plains. A terrain is considered as potential rockfall sources when their slope angles lie over an angle threshold, which is defined where the Gaussian distribution of the morphological unit "Rock cliffs" become dominant over the one of "Steep slopes". In addition to this analysis, the cliff outcrops indicated by the topographic maps were added. They contain however "flat areas", so that only the slope angles values above the mode of the Gaussian distribution of the morphological unit "Steep slopes" were considered. An application of this method is presented over the entire Canton of Vaud (3200 km2), Switzerland. The results were compared with rockfall sources observed on the field and orthophotos analysis in order to validate the method. Finally, the influence of the cell size of the DEM is inspected by applying the methodology over six different DEM resolutions.