Caracterización del mucilago de cacao CCN 51 mediante espectrofotometría UV-visible y absorción atómica” caso: Ecuador-zona 6

Más de 12000 m3 de mucilago de cacao CCN-51 son producidos y abandonados en las fincas de cacao en el Ecuador cada año. El estudio tiene como objetivo caracterizar este residuo en la Zona 6. Las muestras se obtuvieron de 10 lugares dentro de la zona de estudio, las mismas que están geo referenciadas. Para el análisis se usó espectrofotometría UV-Visible para la identificación de azucares reductoras totales, y espectrofotometría de absorción atómica para identificar minerales. Además se determinó parámetros físicos. Los resultados de los análisis fueron los siguientes: pH 4.05±0.004, los sólidos solubles fue de 17.15±0.86 0Brix, la acidez Titulable fue 245.25±21.19 meq/L. Por otra parte las azucares reductoras totales fueron de 1228.82±178.52 g/L y los de calcio, sodio y potasio fueron de 169.21±31.04 mg/L, 161.85±40.41 mg/L, 462.9±49.96 mg/L respectivamente. Se analizó una muestra mediante espectroscopia de infrarrojo para identificar glucosa y sacarosa, los resultados de este análisis fueron 398 g/L, 800g/l, posteriormente se realizó un análisis t student con el resultado obtenido en espectrofotometría UV-Visible de las azucares reductoras totales, como resultado final se estableció que no existe diferencia significativa entre las dos técnicas instrumentales.

Determinação da toxicidade aguda e caracterização de risco ambiental do herbicida Roundup (glifosato) sobre três espécies de peixes

Considering their commercial importance, as these are the species of freshwater fish more commercialized in Brazil, their occurence in different kinds of aquatic environments (lakes, rivers and dams) and for being tolerant to a wide range of variation of various physical parameters and chemical water, the fish species Oreochromis niloticus, Cyprinus carpio and Colossoma macropomum were chosen for this study, furthermore, to test the toxicity we used the herbicide Roundup. The fingerlings of tilapia (Oreochromis niloticus), commun carp (Cyprinus carpio) and tambaqui (Colossoma macropomum) were submitted to the herbicide roundup in the following concentrations: 0.0 (control); 18,06; 19,10; 20,14; 21,18 and 22,22 mg.L-1, 0.0 (control); 13,89; 14,86; 15,83; 16,81 and 17,78 mg.L-1, and 0.0 (control); 18,06; 19,10; 20,14; 21,18 and 22,22 mg.L-1, respectively, three for 96 hours. The LC50 - 96h for O. niloticus, C. carpio and C. macropomum was 21,63, 15,33 and 20,06 mg.L-1 of the herbicide roundup, respectively. The results show that this herbicide is classified as slightly toxic to the three species. The values of dissolved oxygen, pH and temperature recorded in the aquarium control and aquarium experimental of the three fish species have remained without significant variations during the tests, which reduces the possibility of death caused by sudden variations of these parameters during the 96 hours the experiment. The values of LC50 between different species of fish were observed, noting that the species O.niloticus, C. carpio and C. macropomum showed no expressive differences. The values of environmental risk of Roundup were calculated to obtain more stringent parameters in assessing the dangerousness of those on nontargets. The risk of environmental contamination by Roundup for the Nile tilapia, common carp, and tambaqui are low for the lowest application rate (1 L.ha-1) and depths (1.5 and 2.0 m). The dilution of 100%, the highest recommended dose (5 L.ha-1) and depths (1.5 and 2.0 m) the risk is moderate for the three species. The values of the Risk Ratio (QR) were greater than 0,1, indicating that the values of the CAE and LC50 are above acceptable levels and there is a need, this study, a refinement in ecotoxicological tests

The Nature of Microvariability in Blazar 0716+714

We organized an international campaign to observe the blazar 0716+714 in the optical band. The observations took place from February 24, 2009 to February 26, 2009. The global campaign was carried out by observers from more that sixteen countries and resulted in an extended light curve nearly seventy-eight hours long. The analysis and the modeling of this light curve form the main work of this dissertation project. In the first part of this work, we present the time series and noise analyses of the data. The time series analysis utilizes discrete Fourier transform and wavelet analysis routines to search for periods in the light curve. We then present results of the noise analysis which is based on the idea that each microvariability curve is the realization of the same underlying stochastic noise processes in the blazar jet. Neither reoccuring periods nor random noise can successfully explain the observed optical fluctuations. Hence in the second part, we propose and develop a new model to account for the microvariability we see in blazar 0716+714. We propose that the microvariability is due to the emission from turbulent regions in the jet that are energized by the passage of relativistic shocks. Emission from each turbulent cell forms a pulse of emission, and when convolved with other pulses, yields the observed light curve. We use the model to obtain estimates of the physical parameters of the emission regions in the jet.

Broad-scale mapping of seafloor habitats in the north-east Atlantic using existing environmental data

If marine management policies and actions are to achieve long-term sustainable use and management of the marine environment and its resources, they need to be informed by data giving the spatial distribution of seafloor habitats over large areas. Broad-scale seafloor habitat mapping is an approachwhich has the benefit of producing maps covering large extents at a reasonable cost. This approach was first investigated by Roff et al. (2003), who, acknowledging that benthic communities are strongly influenced by the physical characteristics of the seafloor, proposed overlaying mapped physical variables using a geographic information system (GIS) to produce an integrated map of the physical characteristics of the seafloor. In Europe the method was adapted to the marine section of the EUNIS (European Nature Information System) classification of habitat types under the MESH project, andwas applied at an operational level in 2011 under the EUSeaMap project. The present study compiled GIS layers for fundamental physical parameters in the northeast Atlantic, including (i) bathymetry, (ii) substrate type, (iii) light penetration depth and (iv) exposure to near-seafloor currents andwave action. Based on analyses of biological occurrences, significant thresholds were fine-tuned for each of the abiotic layers and later used in multi-criteria raster algebra for the integration of the layers into a seafloor habitat map. The final result was a harmonised broad-scale seafloor habitat map with a 250 m pixel size covering four extensive areas, i.e. Ireland, the Bay of Biscay, the Iberian Peninsula and the Azores. The map provided the first comprehensive perception of habitat spatial distribution for the Iberian Peninsula and the Azores, and fed into the initiative for a pan- European map initiated by the EUSeaMap project for Baltic, North, Celtic and Mediterranean seas.

Gene expression and genome-wide association studies analysis to select heavy pigs for protected designation of origin cured meats production

The high quality of protected designation of origin (PDO) dry-cured pork products depends largely on the chemical and physical parameters of the fresh meat and their variation during the production process of the final product. The discovery of the mechanisms that regulate the variability of these parameters was aided by the reference genome of swine adjuvant to genetic analysis methods. This thesis can contribute to the discovery of genetic mechanisms that regulate the variability of some quality parameters of fresh meat for PDO dry-cured pork production. The first study is of gene expression and showed that between low and high glycolytic potential (GP) samples of Semimembranosus muscle of Italian Large White (ILW) pigs in early postmortem, the differentially expressed genes were all but one over expressed in low GP. These were involved in ATP biosynthesis processes, calcium homeostasis, and lipid metabolism including the potential master regulator gene Peroxisome Proliferator-Activated Receptor Alpha (PPARA). The second is a study in commercial hybrid pigs to evaluate correlations between carcass and fresh ham traits, including carcass and fresh ham lean meat percentages, the former, a potential predictor of the latter. In addition, a genome-wide association study allowed the identification of chromosome-wide associations with phenotypic traits for 19 SNPs, and genome-wide associations for 14 SNPs for ferrochelatase activity. The latter could be a determinant for color variation in nitrite-free dry-cured ham. The third study showed gene expression differences in the Longissimus thoracis muscle of ILW pigs by feeding diets with extruded linseed (source of polyunsaturated fatty acids) and vitamin E and selenium (diet three) or natural (diet four) antioxidants. The diet three promoted a more rapid and massive immune system response possibly determined by improvement in muscle tissue function, while the diet four promoted oxidative stability and increased the anti-inflammatory potential of muscle tissue.

Efficient and low-computational predictive models for spectral sensors

Spectral sensors are a wide class of devices that are extremely useful for detecting essential information of the environment and materials with high degree of selectivity. Recently, they have achieved high degrees of integration and low implementation cost to be suited for fast, small, and non-invasive monitoring systems. However, the useful information is hidden in spectra and it is difficult to decode. So, mathematical algorithms are needed to infer the value of the variables of interest from the acquired data. Between the different families of predictive modeling, Principal Component Analysis and the techniques stemmed from it can provide very good performances, as well as small computational and memory requirements. For these reasons, they allow the implementation of the prediction even in embedded and autonomous devices. In this thesis, I will present 4 practical applications of these algorithms to the prediction of different variables: moisture of soil, moisture of concrete, freshness of anchovies/sardines, and concentration of gasses. In all of these cases, the workflow will be the same. Initially, an acquisition campaign was performed to acquire both spectra and the variables of interest from samples. Then these data are used as input for the creation of the prediction models, to solve both classification and regression problems. From these models, an array of calibration coefficients is derived and used for the implementation of the prediction in an embedded system. The presented results will show that this workflow was successfully applied to very different scientific fields, obtaining autonomous and non-invasive devices able to predict the value of physical parameters of choice from new spectral acquisitions.

Spectral properties of resonant Bose-Fermi mixtures

The object of study of the present work are Bose-Fermi mixtures in three dimensions at zero temperature. The system is characterized by a great tunability of physical parameters that is achieved by means of a Fano-Feshbach resonance. As a result, there are mainly two regimes: we move from a situation in which bosons and fermions are weakly interacting to a context in which bosons are coupled to fermions so as to form molecules that are composite fermions, as the coupling between the two types of particles is increased. In the former case, we can describe the mixture as a weakly attractive Bose-Fermi one, while in the latter the same is described in terms of molecules and excess atoms or particles which are unpaired. The main aim of the thesis is to analyze the spectral weight functions which represent the single-particle excitation spectra of the system and are relevant to recent radio-frequency spectroscopy experiments of the system. In order to pursue this objective, diagrammatic methods are used. The formalism is developed within the T-matrix approach: it consists of an approximate calculation whichselects exclusively the class of Feynman’s diagrams that collects all possible repeated boson-fermion interaction.

Constraining FIR size, dust temperature and dust mass in ALPINE galaxies at redshift 4

The study of galaxies at high redshift plays a crucial role to understand the mechanism of galaxy formation and evolution. At redshifts just after the epoch of re-ionization (4physical parameters regarding dust is essential to trace the history of the star formation rate (SFR). The main purpose of this thesis is to determine the spatial extent of the dust emission in high-redshift galaxies and to provide a lower limit on dust temperature, to constrain the dust mass. This is achieved by studying 23 FIR continuum detected main-sequence galaxies of the ALMA Large Program to INvestigate (ALPINE) survey, performed at high redshift (4

Influence of physical and geometrical parameters on three-dimensional load transfer mechanism at tunnel face

Three-dimensional discretizations used in numerical analyses of tunnel construction normally include excavation step lengths much shorter than tunnel cross-section dimensions. Simulations have usually worked around this problem by using excavation steps that are much larger than the actual physical steps used in a real tunnel excavation. In contrast, the analyses performed in this study were based on finely discretized meshes capable of reproducing the excavation lengths actually used in tunnels, and the results obtained for internal forces are up to 100% greater than those found in other analyses available in the literature. Whereas most reports conclude that internal forces depend on support delay length alone, this study shows that geometric path dependency (reflected by excavation round length) is very strong, even considering linear elasticity. Moreover, many other solutions found in the literature have also neglected the importance of the relative stiffness between the ground mass and support structure, probably owing to the relatively coarse meshes used in these studies. The analyses presented here show that relative stiffness may account for internal force discrepancies in the order of 60%. A dimensionless expression that takes all these parameters into account is presented as a good approximation for the load transfer mechanism at the tunnel face.

Continuous monitoring and quantification of multiple parameters of daily physical activity in ambulatory Duchenne muscular dystrophy patients.

Multiple motor function and strength assessment tools exist for the evaluation of neuromuscular diseases, but most do not directly assess functional ability in the patients' daily physical activity in their home environment. In this study our aim was to assess: 1) the feasibility and accuracy of physical activity monitoring during two days in a home environment of five DMD patients using a non-commercialized monitor containing a 3D accelerometer and a gyroscope, 2) if a difference in the physical activity parameters could be measured before and one month after starting prednisolone. We reliably quantified the time spend sitting, standing, lying, walking, the number of steps taken, the cadence, the number of walking episodes and their duration as well as how these were distributed over the day. Parameters possibly reflecting endurance, such as the duration of the walking episodes or the succession of two or three walking episodes lasting more than 30 s were the most improved after prednisolone treatment. This degree of detailed determination of physical activity in a home environment has not been previously reported in neuromuscular disorders to our knowledge and some of the reported parameters are potential new outcome measures in clinical trials.

Spatial influence of physical and chemical parameters on management zone definition in apple orchards

ABSTRACT Precision agriculture adoption in Brazilian apple orchards is still incipient. This study aimed at evaluating the spatial variability of certain soil properties as soil density, soil penetration resistance, electrical conductivity, yield, and fruit quality in an apple orchard through digital mapping, as well as assessing the correlation between these factors by means of geostatistics, establishing management zones. Forty representative points were set within 2.5 hectares of apple orchard, wherein soil samples were collected and analyzed, besides measurements of fruit quality (Brix degree, size or diameter, pulp firmness and color) to generate an overall index quality. We concluded that the fruit quality indexes, when isolated, did not show strong spatial dependence, unlike the index of fruit quality (FQI), derived from a combination of these parameters, allowing orchard planning according to management zones based on quality.

Influence of eNOS gene polymorphism on cardiometabolic parameters in response to physical training in postmenopausal women

The health-promoting effects of exercise training (ET) are related to nitric oxide (NO) production and/or its bioavailability. The objective of this study was to determine whether single nucleotide polymorphism of the endothelial NO synthase (eNOS) gene at positions -786T>C, G894T (Glu298Asp) and at the variable number of tandem repeat (VNTR) Intron 4b/a would interfere with the cardiometabolic responses of postmenopausal women submitted to physical training. Forty-nine postmenopausal women were trained in sessions of 30-40 min, 3 days a week for 8 weeks. Genotypes, oxidative stress status and cardiometabolic parameters were then evaluated in a double-blind design. Both systolic and diastolic blood pressure values were significantly reduced after ET, which was genotype-independent. However, women without eNOS gene polymorphism at position -786T>C (TT genotype) and Intron 4b/a (bb genotype) presented a better reduction of total cholesterol levels (-786T>C: before = 213 ± 12.1, after = 159.8 ± 14.4, Δ = -24.9% and Intron 4b/a: before = 211.8 ± 7.4, after = 180.12 ± 6.4 mg/dL, Δ = -15%), and LDL cholesterol (-786T>C: before = 146.1 ± 13.3, after = 82.8 ± 9.2, Δ = -43.3% and Intron 4b/a: before = 143.2 ± 8, after = 102.7 ± 5.8 mg/dL, Δ = -28.3%) in response to ET compared to those who carried the mutant allele. Superoxide dismutase activity was significantly increased in trained women whereas no changes were observed in malondialdehyde levels. Women without eNOS gene polymorphism at position -786T>C and Intron 4b/a showed a greater reduction of plasma cholesterol levels in response to ET. Furthermore, no genotype influence was observed on arterial blood pressure or oxidative stress status in this population.

Optimization of Process Parameters for the Extraction of Gelatin from the Skin of Freshwater Fish and the Evaluation of Physical anal Chemical Characteristics

Faculty of Marine Sciences,Cochin University of Science and Technology

Modelling the effect of the physical and chemical characteristics of the materials used as casing layers on the production parameters of Agaricus bisporus

The aim of this research was to show the mathematical data obtained through the correlations found between the physical and chemical characteristics of casing layers and the final mushrooms' properties. For this purpose, 8 casing layers were used: soil, soil + peat moss, soil + black peat, soil + composted pine bark, soil + coconut fibre pith, soil + wood fibre, soil + composted vine shoots and, finally, the casing of La Rioja subjected to the ruffling practice. The conclusion that interplays in the fructification process with only the physical and chemical characteristics of casing are complicated was drawn. The mathematical data obtained in earliness could be explained in non-ruffled cultivation. The variability observed for the mushroom weight and the mushroom diameter variables could be explained in both ruffled and non-ruffled cultivations. Finally, the properties of the final quality of mushrooms were established by regression analysis.