769 resultados para maxilla osteotomy
Resumo:
Purpose: The aim of this study was to evaluate the success rate of maxillary immediate nonfunctional single-tooth loaded implants used into fresh extraction sites (immediate placement condition) or healed ridge (delayed placement condition).Materials and Methods: Eighty-two dental implants were placed in the maxilla of 64 consecutive patients from Private practice office and from a specialization course in Implantology. Forty-six implants were inserted under immediate placement condition, and 36 were inserted under delayed placement condition. The criteria used to evaluate success rate were those previously described by Albrektsson and Zarb (Int J Prosthodont 1993;6: 95-105), and follow-up period ranged from 18.0 to 39.7 months.Results: Seventy-nine implants fulfilled the success rate criteria (96.3%). Moreover, differences concerning implantation condition were not significant (P = 0.33, Qui-square test): three of the failed implants were from immediate placement group (success rate of 93.5%), and none was from delayed placement group (success rate of 100.0%).Conclusion: In the present sample, no statistically significant differences were detected for immediate nonfunctional single-tooth loaded implants under immediate placement condition in comparison with those inserted under delayed placement condition; both protocols had high success rate in maxillary incisors, canines, and premolars areas.
Resumo:
Background:Bone graft procedures have been used commonly in buco-maxillo-facial surgery. For this reason, many researchers have evaluated the bone substitutes.Purpose:The present study evaluated soft and hard tissue reactions to two different hydroxyapatites HAs (synthetic HA and natural HA) and bioactive glass implanted into the sockets immediately after extraction.Materials and Methods:First and third upper and lower premolars, on both sides, were extracted from six female dogs. The alveolar sockets were randomly assigned to four groups: Group 1 - control (unfilled), Group 2 - filled with synthetic hydroxyapatite, Group 3 - filled with bovine bone mineral (natural HA), and Group 4 - filled with bioactive glass. The animals were euthanized at 4 weeks (n = 2), 8 weeks (n = 2), and 28 weeks (n = 2) after extraction. The mandible and maxilla of each animal were removed for histological analysis to determine soft tissue reactions, newly formed bone, bone characteristics, and presence or absence of implanted materials.Results:Most particles of synthetic hydroxyapatite had bone formation on their surface, although some particles showed a layer of fibrous connective tissue. The bovine bone mineral group exhibited particles partially replaced with bone formation. The bioactive glass group showed particles with a thin layer of calcified tissue, but was absent in some specimens, suggesting complete resorption.Conclusion:All biomaterials had similar behavior. Bovine bone mineral, compared to synthetic hydroxyapatite and bioactive glass, showed a larger number of particles covered with osseous tissue. All biomaterials interfered with the socket repair process.
Resumo:
The authors verified the anatomical location of the mandibular foramen, lingula and antilingula in dry mandibles, aiming to obtain information that could be used when performing mandibular osteotomies. Forty-four mandibles (88 sides) were evaluated. The distances were measured using a sliding calliper, with the mandibles fixed in a reproducible position. Results showed that the mandibular foramen is on average 5.82 mm below the lingula. Regarding the statistical comparison between the mandibular foramen entrance and the anti lingula position, there is no correlation between the position of those two structures in the studied sample. The mandibular foramen is slightly posterior in relation to the centre of the ramus. The lingula is an important anatomic landmark for ramus surgery, and for determining the distance to the mandibular foramen entrance. The use of the antilingula as a landmark for the position of the vertical ramus osteotomy is not recommended.
Resumo:
The hyperdontia teeth is an anomaly of unknown cause, characterized by increased numbers of teeth. It occurs more frequently in the maxilla, preferably in males, and is more common in permanent dentition. The presence of supernumerary teeth can be responsible for alterations in the permanent dentition, such as the delay in the eruption and dislocations. In addition, the patient may have abnormal occlusion, resorption of adjacent teeth and cyst formation. This article describes in a male patient, 9 years old, the presence of two upper right lateral incisor and one upper left lateral incisor, permanent, partially erupted. Radiological examination revealed a second left upper lateral incisor, unerupted. It should be noted that both, in the region of the 1.2 as in 2.2, the teeth showed normal anatomy and not the conoid appearance commonly observed in supernumerary teeth. In our case, in order to perform orthodontic treatment surgical removal of the teeth noted above was indicated.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Stenocionops furcatus is a spider crab found in the western Atlantic, from Georgia, USA to Rio Grande do Sul, Brazil, on sand, coral, rocks or mud bottoms from the intertidal zone to 180 m. We describe all laboratory-reared larval stages of S. furcatus obtained from the northern coast of São Paulo State, Brazil, and compare our data with existing larval descriptions for the genus and other mithracids. The larval development of S. furcatus consists of two zoeal stages and one megalopa. The durations of the first and second zoeal stage were similar to4 and 5 days respectively, the megalopa appearing 10-18 days after hatching. Our results show that the zoeae of S. furcatus differ from those of other Mithracidae by possessing four setae on the proximal lobe of the coxal endite of the maxilla, instead of five, and by the presence of mid-dorsal setae on the third abdominal somite in the second zoeal stage, which are lacking in other mithracids. Larval descriptions for Stenocionops in two previous publications were attributed to the subspecies S. furcatus coelatus from the Caribbean. Larvae from Brazilian waters closely resemble one of these accounts, suggesting that this taxon extends beyond the West Indies and that the other description represents larvae of S. furcatus furcatus. Additional morphological details, not available previously, are provided.
Resumo:
The juvenile development of Callinectes ornatus was studied from megalopae collected in the neuston off Ubatuba, São Paulo State, Brazil. The animals were raised in the laboratory under constant temperature (25 +/- 1 degrees C), filtered sea water (35 parts per thousand) from the sampling location, and the natural photoperiod. Eleven stages of the juvenile phase were obtained. The main features of the first juvenile stage diagnostic of the species are: the number of segments in the antenna; number of setae on the exopod, endopod, basal endite and coxal endite of the maxilla, on the exopod, endopod, basal endite, coxal endite and epipod of the 1(st) maxilliped, and on the exopod, endopod and epipod of the 2(nd) maxilliped. Sexual dimorphism becomes apparent from the fourth juvenile stage onwards.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Hyphessobrycon rutiliflavidus, new species, is described from the upper rio Paraguai in Cuiaba, State of Mato Grosso, Brazil. The new species differs from all other congeners by the following combination of characters: black humeral spot, slightly diffuse at its tips, and caudal-peduncle blotch present; midlateral body stripe conspicuous in its posteriormost portion, extending to the tips of the middle caudal rays; anal fin with iii, 15 to iv, 19 rays (mode iv, 17); upper jaw length, 42.3 to 49.5% of the head length; maxilla with 2-5 teeth (mode 3); all the fins of males reddish-orange and of females yellowish.
Resumo:
Objective: The present study evaluated morphometrically bone loss percentages in experimental periodontitis in rats, comparing different locations (lingual mandible, palatal maxilla and buccal maxilla) and two evaluation methods (distance and area methods). Material and Methods: Ligatures were placed around the maxillary right second molar and around the mandibular right first molar in 14 female Wistar rats. The contralateral molars served as intragroup control. After 4 weeks, the rats were sacrificed and their mandible and maxilla were removed. The specimens were dissected and stained with methylene blue dye. Bone loss was evaluated by two different methods on the surfaces of the defleshed jaw. In the first method, the distance from the cementoenamel junction (CEJ) to the alveolar bone crest was measured in the roots of teeth associated with ligature. In the second method, the area of bone loss was determined using the alveolar tissue bone, CEJ and the proximal region of roots associated with the ligature as reference. The data were converted to bone loss percentages caused by ligature: (ligated - unligated) x 100/ligated. Results: When comparing the distance and area methods, no statistically significant difference was observed (p>0.05). Both methodologies indicated that the maxilla presented greater bone loss than the mandible and it was more accentuated on the buccal side than on the palatal side (p<0.05). Conclusions: The findings of this study show that both the area and the distance methods can be used to evaluate bone loss caused by ligature placement in rats, and suggest applying the morphometric methodology to the maxilla on the buccal side.
Resumo:
The purpose of this study was to observe the clinical outcome of bone spreading and standardized dilation of horizontally resorbed bone during immediate implant placement using a "screw-type" configuration of expansion and threadformers. Fifty-three patients were included in this study, and 41 edentulous areas in anterior and posterior maxillas were treated. Sixty-eight implants were placed using an insertion torque of at least 40 Ncm. Abutments were delivered 4 to 6 months after implant placement. The overall failure percentage was 4.41% (3 failures). A retrieved analysis of I implant removed at 3 years after placement demonstrated bone resorption down to the level of the third thread. The bone spreader technique is different from Summers' osteotome, both in clinical use and in armamentarium. The main advantage of the crest-expanding technique is that it is a less invasive procedure; the facial wall expands after the medullary bone is compressed against the cortical wall. Within the limits of this preliminary study, the cumulative survival rate for this method of implant placement is 95.58% at 3 years. This study confirms that a bone spreader used in the maxilla shows an unusually low failure rate after 3 years.
Resumo:
A finalidade deste artigo é avaliar o efeito da expansão rápida da maxila (ERM) na via aérea superior. Por intermédio de um caso clínico, será relatado como indivíduos com atresia da maxila e com comprometimento da função naso-respiratória podem beneficiar-se com a ERM. Para entender melhor as alterações morfológicas decorrentes do paciente com problemas respiratórios, deve-se conhecer a anatomia e a fisiologia do sistema respiratório. Entretanto, não se pode esquecer que o tratamento deste paciente é multidisciplinar, envolvendo o ortodontista, otorrinolaringologista e a fonoaudióloga.