Lateral impact response and parametric studies of axially loaded square concrete filled steel tube columns

This paper presents a numerical study on the response of axially loaded slender square concrete filled steel tube (CFST) columns under low velocity lateral impact loading. A finite element analysis (FEA) model was developed using the explicit dynamic nonlinear finite element code LS -DYNA in which the strain rate effects of both steel and concrete, contact between steel tube and concrete and confinement effect provided by the steel tube for the concrete were considered. The model also benefited from a relatively recent feature of LS-DYNA for applying a pre-loading in the explicit solver. The developed numerical model was verified for its accuracy and adequacy by comparing the results with experimental results available in the literature. The verified model was then employed to conduct a parametric study to investigate the influence of axial load level, impact location, support conditions, and slenderness ratio on the response of the CFST columns. A good agreement between the numerical and experimental results was achieved. The model could reasonably predict the impact load-deflection history and deformed shape of the column at the end of the impact event. The results of the parametric study showed that whilst impact location, axial load level and slenderness ratio can have a significant effect on the peak impact force, residual lateral deflection and maximum lateral deflection, the influence of support fixity is minimal. With an increase of axial load to up to a certain level, the peak force increases; however, a further increase in the axial load causes a decrease in the peak force. Both residual lateral deflection and maximum lateral deflection increase as axial load level increases. Shifting the impact location towards the supports increases the peak force and reduces both residual and maximum lateral deflections. A rise in slenderness ratio decreases the peak force and increases the residual and maximum lateral deflections.

Self management of haemodialysis for end stage renal disease : a systematic review

Background Exploring self management in End Stage Renal Disease is extremely important for patients as they encounter several challenges including ongoing symptoms, complex treatments and restrictions, uncertainty about life and a dependency on technology, all of which impact upon their autonomy particularly after commencement of haemodialysis. Objective To summarise the effects of nursing interventions which effect selfmanagement of haemodialysis for patients with End Stage Renal Disease. Search strategy Search terms were chosen after reviewing text words and MeSH terms in relevant articles and databases. An extensive search of the literature from 1966 to June 2009 was conducted across a range of health databases including Cochrane Central Register of Controlled Trials, MEDLINE, EMBASE, CINAHL, PsycINFO and Web of Science. Further studies were identified from reference lists of all retrieved studies. Selection criteria We considered randomised controlled trials that compared interventions to improve self management of haemodialysis in patients with ESRD. In the absence of RCTs, comparative studies without randomisation as well as before and after studies were considered for inclusion. Methodological quality Study reports selected for retrieval were assessed by two independent reviewers for methodological quality prior to inclusion in the review using the standardised critical appraisal instruments for the Joanna Briggs Institute System for the Unified Management, Assessment and Review of Information package (SUMARI). Data collection and analysis Data was extracted using the JBI data extraction tool for evidence of effectiveness independently by pairs of review authors. The evidence was reported in narrative summaries due to heterogeneity of the interventions of the studies. Results and conclusions Five randomised controlled trials were included in the review. Overall, the evidence found that psychosocial and educational interventions influenced self management of haemodialysis in this patient population.

End-of-life care pathways for improving outcomes in caring for the dying (Review)

Background This is an updated version of a Cochrane review first published in Issue 1, 2010 of The Cochrane Library. In many clinical areas, integrated care pathways are utilised as structured multidisciplinary care plans that detail essential steps in caring for patients with specific clinical problems. In particular, care pathways for the dying have been developed as a model to improve care of patients who are in the last days of life. The care pathways were designed with an aim of ensuring that the most appropriate management occurs at the most appropriate time and that it is provided by the most appropriate health professional. There have been sustained concerns about the safety of implementing end-of-life care pathways, particularly in the UK. Therefore, there is a significant need for clinicians and policy makers to be informed about the effects of end-of-life care pathways with a systematic review. Objectives To assess the effects of end-of-life care pathways, compared with usual care (no pathway) or with care guided by another end-of-life care pathway across all healthcare settings (e.g. hospitals, residential aged care facilities, community). In particular, we aimed to assess the effects on symptom severity and quality of life of people who are dying; those related to the care such as families, carers and health professionals; or a combination of these. Search Methods We searched the Cochrane Central Register of Controlled Trials (CENTRAL) (Issue 6, 2013), MEDLINE, EMBASE, PsycINFO, CINAHL, review articles and reference lists of relevant articles.We conducted the original search in September 2009, and the updated search in June 2013. Selection Criteria All randomised controlled trials (RCTs), quasi-randomised trial or high-quality controlled before-and-after studies comparing use versus non-use of an end-of-life care pathway in caring for the dying. Data Collection and Analysis Two review authors assessed the results of the searches against the predetermined criteria for inclusion. Main Results The original review identified 920 titles. The updated search found 2042 potentially relevant titles (including the original 920), but no additional studies met criteria for inclusion in the review update. Authors’ Conclusions With sustained concerns about the safety of the pathway implementation and the lack of available evidence on important patient and relative outcomes, recommendations for the use of end-of-life pathways in caring for the dying cannot be made. Since the last version of this review, no new studies met criteria for inclusion in the review update. With recently documented concerns related to the potential adverse effects associated with Liverpool Care Pathway (the most commonly used end-of-life care pathway), we do not recommend decision making based on indirect or low-quality evidence. All health services using end-of-life care pathways are encouraged to have their use of the pathway, to date, independently audited. Any subsequent use should be based on carefully documented evaluations. Large RCTs or other well-designed controlled studies are urgently required for the evaluation of the use of end-of-life care pathways in caring for dying people in various clinical settings. In future studies, outcome measures should include benefits or harms concerning the outcomes of interest in this review in relation to patients, families, carers and health professionals.

West End : seat of power? (Griffith, QLD)

This video details interviews undertaken and shows a range of varying local opinions in West End within the Griffith electorate of Brisbane in the lead up to 2007's federal election. In 2007, West Enders had both the sitting Queensland Premier, Anna Bligh, and the impending Prime Minister, Kevin Rudd, as their local members. This video was produced as part of the YouDecide2007, a non-profit citizen journalism intiative led by QUT's Creative Industries and funded by the ARC. The camera man and editor was Barry Saunders.

Dynamic contrast-enhanced magnetic resonance imaging as a biomarker for the pharmacological response of PTK787/ZK 222584, an inhibitor of the vascular endothelial growth factor receptor tyrosine kinases, in patients with advanced colorectal cancer and liver metastases: Results from two phase I studies

Purpose: PTK787/ZK 222584 (PTK/ZK), an orally active inhibitor of vascular endothelial growth factor (VEGF) receptor tyrosine kinases, inhibits VEGF-mediated angiogenesis. The pharmacodynamic effects of PTK/ZK were evaluated by assessing changes in contrast-enhancement parameters of metastatic liver lesions using dynamic contrast-enhanced magnetic resonance imaging (DCE-MRI) in patients with advanced colorectal cancer treated in two ongoing, dose-escalating phase I studies. Patients and Methods: Twenty-six patients had DCE-MRI performed at baseline, day 2, and at the end of each 28-day cycle. Doses of oral PTK/ZK ranged from 50 to 2000 mg once daily. Tumor permeability and vascularity were assessed by calculating the bidirectional transfer constant (Ki). The percentage of baseline Ki (% of baseline Ki) at each time point was compared with pharmacokinetic and clinical end points. Results: A significant negative correlation exists between the % of baseline Ki and increase in PTK/ZK oral dose and plasma levels (P = .01 for oral dose; P = .0001 for area under the plasma concentration curve at day 2). Patients with a best response of stable disease had a significantly greater reduction in Ki at both day 2 and at the end of cycle 1 compared with progressors (mean difference in % of baseline Ki, 47%, P = .004%; and 51%, P = .006; respectively). The difference in % of baseline Ki remained statistically significant after adjusting for baseline WHO performance status. Conclusion: These findings should help to define a biologically active dose of PTK/ZK. These results suggest that DCE-MRI may be a useful biomarker for defining the pharmacological response and dose of angiogenesis inhibitiors, such as PTK/ZK, for further clinical development. © 2003 by American Society of Clinical Oncology.

Humanities and social scientific research methods in porn studies

Porn studies researchers in the humanities have tended to use different research methods from those in social sciences. There has been surprisingly little conversation between the groups about methodology. This article presents a basic introduction to textual analysis and statistical analysis, aiming to provide for all porn studies researchers a familiarity with these two quite distinct traditions of data analysis. Comparing these two approaches, the article suggests that social science approaches are often strongly reliable – but can sacrifice validity to this end. Textual analysis is much less reliable, but has the capacity to be strongly valid. Statistical methods tend to produce a picture of human beings as groups, in terms of what they have in common, whereas humanities approaches often seek out uniqueness. Social science approaches have asked a more limited range of questions than have the humanities. The article ends with a call to mix up the kinds of research methods that are applied to various objects of study.

Web crippling tests of hollow flange channel beams – end one flange and interior one flange load cases

LiteSteel beam (LSB) is a new cold-formed steel hollow flange channel section produced using a patented manufacturing process involving simultaneous cold-forming and dual electric resistance welding. The LSBs were commonly used as floor joists and bearers with web openings in residential, industrial and commercial buildings. Due to the unique geometry of LSBs, as well as its unique residual stress characteristics and initial geometric imperfections resultant of manufacturing processes, much of the existing research for common cold-formed steel sections is not directly applicable to LSBs. Many research studies have been carried out to evaluate the behaviour and design of LSBs subject to pure bending actions, predominant shear and combined actions. However, to date, no investigation has been conducted into the web crippling behaviour and strength of LSB sections. Hence detailed experimental studies were conducted to investigate the web crippling behaviour and strengths of LSBs under EOF (End One Flange) and IOF (Interior One Flange) load cases. A total of 26 web crippling tests was conducted and the results were compared with current AS/NZS 4600 design rules. This comparison showed that AS/NZS 4600 (SA, 2005) design rules are very conservative for LSB sections under EOF and IOF load cases. Suitable design equations have been proposed to determine the web crippling capacity of LSBs based on experimental results. This paper presents the details of this experimental study on the web crippling behaviour and strengths of LiteSteel beams under EOF and IOF load cases.

The importance of use and end-of-life phases to the life cycle greenhouse gas (GHG) emissions of concrete : a review

Global climate change is one of the most significant environmental impacts at the moment. One central issue for the building and construction industry to address global climate change is the development of credible carbon labelling schemes for building materials. Various carbon labelling schemes have been developed for concrete due to its high contribution to global greenhouse gas (GHG) emissions. However, as most carbon labelling schemes adopt cradle-to-gate as system boundary, the credibility of the eco-label information may not be satisfactory because recent studies show that the use and end-of-life phases can have a significant impact on the life cycle GHG emissions of concrete in terms of carbonation, maintenance and rehabilitation, other indirect emissions, and recycling activities. A comprehensive review on the life cycle assessment of concrete is presented to holistically examine the importance of use and end-of-life phases to the life cycle GHG quantification of concrete. The recent published ISO 14067: Carbon footprint of products – requirements and guidelines for quantification and communication also mandates the use of cradle-to-grave to provide publicly available eco-label information when the use and end-of-life phases of concrete can be appropriately simulated. With the support of Building Information Modelling (BIM) and other simulation technologies, the contribution of use and end-of-life phases to the life cycle GHG emissions of concrete should not be overlooked in future studies.

Death on the front page : “Awesome things” and this thing called humanity

It has been called “the world’s worst recorded natural disaster,” and “the largest earthquake in 40 years,” galvanizing the largest global relief effort in history. For those of us involved in the discipline and/or the practice of communications, we realized that it presented a unique case study from a number of perspectives. Both the media and the public became so enraptured and enmeshed in the story of the tsunami of December 26, 2004, bringing to the fore a piece of geography and a peoples too rarely considered prior to the tragedy, that we felt compelled to examine the phenomenon. The overwhelming significance of this volume comes from its being a combination of both academic scholars and development practitioners in the field. Its poignancy becomes underscored from their wide-ranging perspectives, with 21 chapters representing some 14 different countries. Their realities provide not only credibility but also an unprecedented sensitivity to communication issues. Our approach here considers Tsunami 2004 from five communication perspectives: 1.) Interpersonal/ intercultural, 2.) Mass media, 3.) Telecommunications, 4.) Ethics, philanthropy, and development communication, and; 5.) Personal testimonies and observations. You will learn even more here about the theory and practice of disaster/crisis communication.

A Tobit model for analyzing speed limit compliance in work zones

Poor compliance with speed limits is a serious safety concern in work zones. Most studies of work zone speeds have focused on descriptive analyses and statistical testing without systematically capturing the effects of vehicle and traffic characteristics. Consequently, little is known about how the characteristics of surrounding traffic and platoons influence speeds. This paper develops a Tobit regression technique for innovatively modeling the probability and the magnitude of non-compliance with speed limits at various locations in work zones. Speed data is transformed into two groups—continuous for non-compliant and left-censored for compliant drivers—to model in a Tobit model framework. The modeling technique is illustrated using speed data from three long-term highway work zones in Queensland, Australia. Consistent and plausible model estimates across the three work zones support the appropriateness and validity of the technique. The results show that the probability and magnitude of speeding was higher for leaders of platoons with larger front gaps, during late afternoon and early morning, when traffic volumes were higher, and when higher proportions of surrounding vehicles were non-compliant. Light vehicles and their followers were also more likely to speed than others. Speeding was more common and greater in magnitude upstream than in the activity area, with higher compliance rates close to the end of the activity area and close to stop/slow traffic controllers. The modeling technique and results have great potential to assist in deployment of appropriate countermeasures by better identifying the traffic characteristics associated with speeding and the locations of lower compliance.

Pituitary tumours : all silent on the epigenetics front

Investigation of the epigenome of sporadic pituitary tumours is providing a more detailed understanding of aberrations that characterise this tumour type. Early studies, in this and other tumour types adopted candidate-gene approaches to characterise CpG island methylation as a mechanism responsible for or associated with gene silencing. However, more recently, investigators have adopted approaches that do not require a priori knowledge of the gene and transcript, as example differential display techniques, and also genome-wide, array-based approaches, to 'uncover' or 'unmask' silenced genes. Furthermore, through use of chromatin immunoprecipitation as a selective enrichment technique; we are now beginning to identify modifications that target the underlying histones themselves and that have roles in gene-silencing events. Collectively, these studies provided convincing evidence that change to the tumour epigenome are not simply epiphenomena but have functional consequences in the context of pituitary tumour evolution. Our ability to perform these types of studies has been and is increasingly reliant upon technological advances in the genomics and epigenomics arena. In this context, other more recent advances and developing technologies, and, in particular, next generation or flow cell re-sequencing techniques offer exciting opportunities for our future studies of this tumour type.

Web crippling studies of Duragal channel sections – ETF and ITF load cases

Cold-formed steel members have many advantages over hot-rolled steel members. However, they are susceptible to various buckling modes at stresses below the yield stress of the member because of their relatively high width-to-thickness ratio. Web crippling is one of the failure modes that can occur when the members are subjected to transverse high concentrated loadings and/or reactions. The four common loading conditions are the end-one-flange (EOF), interior-one-flange (IOF), end-two-flange (ETF) and interior-two-flange (ITF) loadings. Recently a new test method has been proposed by AISI to obtain the web crippling capacities under these four loading conditions. Using this test method 38 tests were conducted in this research to investigate the web crippling behaviour and strength of channel beams under ETF and ITF cases. Unlipped channel sections having a nominal yield stress of 450 MPa were tested with different web slenderness and bearing lengths. The flanges of these channel sections were not fastened to the supports. In this research the suitability of the current design rules in AS/NZS 4600 and the AISI S100 Specification for unlipped channels subject to web crippling was investigated, and suitable modifications were proposed where necessary. In addition to this, a new design rule was proposed based on the direct strength method to predict the web crippling capacities of tested beams. This paper presents the details of this experimental study and the results.

Experimental studies on web crippling behaviour of hollow flange channel beams under two flange load cases

This paper presents the details of an experimental study of a cold-formed steel hollow flange channel beam known as LiteSteel beam (LSB) subject to web crippling under End Two Flange (ETF) and Interior Two Flange (ITF) load cases. The LSB sections with two rectangular hollow flanges are made using a simultaneous cold-forming and electric resistance welding process. Due to the geometry of the LSB, and its unique residual stress characteristics and initial geometric imperfections, much of the existing research for common cold-formed steel sections is not directly applicable to LSB. Experimental and numerical studies have been carried out to evaluate the behaviour and design of LSBs subject to pure bending, predominant shear and combined actions. To date, however, no investigation has been conducted on the web crippling behaviour and strength of LSB sections. Hence an experimental study was conducted to investigate the web crippling behaviour and capacities of LSBs. Twenty-eight web crippling tests were conducted under ETF and ITF load cases, and the ultimate web crippling capacities were compared with the predictions from the design equations in AS/NZS 4600 and AISI S100. This comparison showed that AS/NZS 4600 and AISI S100 web crippling design equations are unconservative for LSB sections under ETF and ITF load cases. Hence new equations were proposed to determine the web crippling capacities of LSBs based on experimental results. Suitable design rules were also developed under the direct strength method (DSM) format.

A comparison of treatment options for management of end stage kidney disease in elderly patients : a systematic review

Background Chronic kidney disease is a global public health problem of increasing prevalence. There are five stages of kidney disease, with Stage 5 indicating end stage kidney disease (ESKD) requiring dialysis or death will eventually occur. Over the last two decades there have been increasing numbers of people commencing dialysis. A majority of this increase has occurred in the population of people who are 65 years and over. With the older population it is difficult to determine at times whether dialysis will provide any benefit over non-dialysis management. The poor prognosis for the population over 65 years raises issues around management of ESKD in this population. It is therefore important to review any research that has been undertaken in this area which compares outcomes of the older ESKD population who have commenced dialysis with those who have received non-dialysis management. Objective The primary objective was to assess the effect of dialysis compared with non-dialysis management for the population of 65 years and over with ESKD. Inclusion criteria Types of participants This review considered studies that included participants who were 65 years and older. These participants needed to have been diagnosed with ESKD for greater than three months and also be either receiving renal replacement therapy (RRT) (hemodialysis [HD] or peritoneal dialysis [PD]) or non-dialysis management. The settings for the studies included the home, self-care centre, satellite centre, hospital, hospice or nursing home. Types of intervention(s)/phenomena of interest This review considered studies where the intervention was RRT (HD or PD) for the participants with ESKD. There was no restriction on frequency of RRT or length of time the participant received RRT. The comparator was participants who were not undergoing RRT. Types of studies This review considered both experimental and epidemiological study designs including randomized controlled trials, non-randomized controlled trials, quasi-experimental, before and after studies, prospective and retrospective cohort studies, case control studies and analytical cross sectional studies. This review also considered descriptive epidemiological study designs including case series, individual case reports and descriptive cross sectional studies for inclusion. This review included any of the following primary and secondary outcome measures: •Primary outcome – survival measures •Secondary outcomes – functional performance score (e.g. Karnofsky Performance score) •Symptoms and severity of end stage kidney disease •Hospital admissions •Health related quality of life (e.g. KDQOL, SF36 and HRQOL) •Comorbidities (e.g. Charlson Comorbidity index).

Levels and trends of PBDEs and HBCDs in the global environment : status at the end of 2012

In this paper, we have compiled and reviewed the most recent literature, published from January2010 to December 2012, relating to the human exposure, environmental distribution, behaviour, fate and concentration time trends of polybrominated diphenyl ether (PBDE) and hexabromocyclododecane (HBCD) flame retardants, in order to establish their current trends and priorities for future study. Due to the large volume of literature included, we have provided full detail of the reviewed studies as Electronic Supplementary Information and here summarise the most relevant findings. Decreasing time trends for penta-mix PBDE congeners were seen for soils in northern Europe, sewage sludge in Sweden and the USA, carp from a US river, trout from three of the Great Lakes and in Arctic and UK marine mammals and many birds, but increasing time trends continue in Arctic polar bears and some birds at high trophic levels in northern Europe. This is a result of the time delay inherent in long-range atmospheric transport processes. In general, concentrations of BDE209 (the major component of the deca-mix PBDE product) are continuing to increase. Of major concern is the possible/likely debromination of the large reservoir of BDE209 in soils and sediments worldwide, to yield lower brominated congeners which are both more mobile and more toxic, and we have compiled the most recent evidence for the occurrence of this degradation process. Numerous studies reported here reinforce the importance o f this future concern. Time trends for HBCDs are mixed, with both increases and decreases evident in different matrices and locations and, notably, with increasing occurrence in birds of prey.