Spatial distribution of plastic pollutants in a transit from Puget Sound to outside Nootka Sound Canada

Senior thesis written for Oceanography 445

Projecto de pré-dimensionamento de uma ETAR em Luanda - Angola

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização de Hidráulica

Risk criteria in occupational environments: critical overview and discussion

The current work can be seen as a starting point for the discussion of the problematic on risk acceptance criteria in occupational environments. Some obstacles to the quantitative acceptance criteria formulation and use were analyzed. A look to the long tradition of major hazards accidents was also performed. This work shows that organizations can have several difficulties in acceptance criteria formulation and that the use of pre-defined acceptance criteria in risk assessment methodologies can be inadequate in some cases. It is urgent to define guidelines that can help organizations in the formulation of risk acceptance criteria for occupational environments.

Water quality in lakes and reservoirs in China

Dissertation elaborated for the partial fulfilment of the requirements of the Master Degree in Civil Engineering in the Speciality Area of Hydarulics

Numerical solution of a PDE system with non-linear steady state conditions that translates the air stripping pollutants removal

This work deals with the numerical simulation of air stripping process for the pre-treatment of groundwater used in human consumption. The model established in steady state presents an exponential solution that is used, together with the Tau Method, to get a spectral approach of the solution of the system of partial differential equations associated to the model in transient state.

Spectral solution for the air stripping pollutants removal dynamic model with non linear steady state conditions

This work deals with the numerical simulation of air stripping process for the pre-treatment of groundwater used in human consumption. The model established in steady state presents an exponential solution that is used, together with the Tau Method, to get a spectral approach of the solution of the system of partial differential equations associated to the model in transient state.

Defining risk acceptance criteria in occupational settings: A case study in the furniture industrial sector

The use of appropriate acceptance criteria in the risk assessment process for occupational accidents is an important issue but often overlooked in the literature, particularly when new risk assessment methods are proposed and discussed. In most cases, there is no information on how or by whom they were defined, or even how companies can adapt them to their own circumstances. Bearing this in mind, this study analysed the problem of the definition of risk acceptance criteria for occupational settings, defining the quantitative acceptance criteria for the specific case study of the Portuguese furniture industrial sector. The key steps to be considered in formulating acceptance criteria were analysed in the literature review. By applying the identified steps, the acceptance criteria for the furniture industrial sector were then defined. The Cumulative Distribution Function (CDF) for the injury statistics of the industrial sector was identified as the maximum tolerable risk level. The acceptable threshold was defined by adjusting the CDF to the Occupational, Safety & Health (OSH) practitioners’ risk acceptance judgement. Adjustments of acceptance criteria to the companies’ safety cultures were exemplified by adjusting the Burr distribution parameters. An example of a risk matrix was also used to demonstrate the integration of the defined acceptance criteria into a risk metric. This work has provided substantial contributions to the issue of acceptance criteria for occupational accidents, which may be useful in overcoming the practical difficulties faced by authorities, companies and experts.

Forest management: different criteria – equal sustainability

From the forest management perspective, many definitions have been proposed for the concept of forest sustainability. Despite this apparent diversity, most of them converge on the same aspects. In this work we developed a comparative approach of two distinct forest management methodologies used in Europe, more precisely in Slovenia and in Portugal. Although in each case study differences in vegetation, climate and pedological characteristics are evident, we were able to show some peculiar aspects of both the Slovenian and the Portuguese examples. This study also dealt with the evolution of the term sustainability in the last decades and how it played an important role for forest management options.

A Multiple Criteria Utility-based Approa h for the Unit Commitment with Wind Power and Pumped Storage Hydro

The integration of wind power in eletricity generation brings new challenges to unit commitment due to the random nature of wind speed. For this particular optimisation problem, wind uncertainty has been handled in practice by means of conservative stochastic scenario-based optimisation models, or through additional operating reserve settings. However, generation companies may have different attitudes towards operating costs, load curtailment, or waste of wind energy, when considering the risk caused by wind power variability. Therefore, alternative and possibly more adequate approaches should be explored. This work is divided in two main parts. Firstly we survey the main formulations presented in the literature for the integration of wind power in the unit commitment problem (UCP) and present an alternative model for the wind-thermal unit commitment. We make use of the utility theory concepts to develop a multi-criteria stochastic model. The objectives considered are the minimisation of costs, load curtailment and waste of wind energy. Those are represented by individual utility functions and aggregated in a single additive utility function. This last function is adequately linearised leading to a mixed-integer linear program (MILP) model that can be tackled by general-purpose solvers in order to find the most preferred solution. In the second part we discuss the integration of pumped-storage hydro (PSH) units in the UCP with large wind penetration. Those units can provide extra flexibility by using wind energy to pump and store water in the form of potential energy that can be generated after during peak load periods. PSH units are added to the first model, yielding a MILP model with wind-hydro-thermal coordination. Results showed that the proposed methodology is able to reflect the risk profiles of decision makers for both models. By including PSH units, the results are significantly improved.

Modelling and optimization of the ion exchange membrane bioreactor for removal of anionic pollutants from drinking water streams

Dissertação para obtenção do Grau de Doutor em Engenharia Química, especialidade de Engenharia Bioquímica

Identification of atmospheric pollutants control mechanisms during co-combustion of coal and non-toxic wastes

Doctoral dissertation for Ph.D. degree in Sustainable Chemistry

Appropriateness criteria for surgery improve clinical outcomes in patients with low back pain and/or sciatica.

STUDY DESIGN: Prospective, controlled, observational outcome study using clinical, radiographic, and patient/physician-based questionnaire data, with patient outcomes at 12 months follow-up. OBJECTIVE: To validate appropriateness criteria for low back surgery. SUMMARY OF BACKGROUND DATA: Most surgical treatment failures are attributed to poor patient selection, but no widely accepted consensus exists on detailed indications for appropriate surgery. METHODS: Appropriateness criteria for low back surgery have been developed by a multispecialty panel using the RAND appropriateness method. Based on panel criteria, a prospective study compared outcomes of patients appropriately and inappropriately treated at a single institution with 12 months follow-up assessment. Included were patients with low back pain and/or sciatica referred to the neurosurgical department. Information about symptoms, neurologic signs, the health-related quality of life (SF-36), disability status (Roland-Morris), and pain intensity (VAS) was assessed at baseline, at 6 months, and at 12 months follow-up. The appropriateness criteria were administered prospectively to each clinical situation and outside of the clinical setting, with the surgeon and patients blinded to the results of the panel decision. The patients were further stratified into 2 groups: appropriate treatment group (ATG) and inappropriate treatment group (ITG). RESULTS: Overall, 398 patients completed all forms at 12 months. Treatment was considered appropriate for 365 participants and inappropriate for 33 participants. The mean improvement in the SF-36 physical component score at 12 months was significantly higher in the ATG (mean: 12.3 points) than in the ITG (mean: 6.8 points) (P = 0.01), as well as the mean improvement in the SF-36 mental component score (ATG mean: 5.0 points; ITG mean: -0.5 points) (P = 0.02). Improvement was also significantly higher in the ATG for the mean VAS back pain (ATG mean: 2.3 points; ITG mean: 0.8 points; P = 0.02) and Roland-Morris disability score (ATG mean: 7.7 points; ITG mean: 4.2 points; P = 0.004). The ATG also had a higher improvement in mean VAS for sciatica (4.0 points) than the ITG (2.8 points), but the difference was not significant (P = 0.08). The SF-36 General Health score declined in both groups after 12 months, however, the decline was worse in the ITG (mean decline: 8.2 points) than in the ATG (mean decline: 1.2 points) (P = 0.04). Overall, in comparison to ITG patients, ATG patients had significantly higher improvement at 12 months, both statistically and clinically. CONCLUSION: In comparison to previously reported literature, our study is the first to assess the utility of appropriateness criteria for low back surgery at 1-year follow-up with multiple outcome dimensions. Our results confirm the hypothesis that application of appropriateness criteria can significantly improve patient outcomes.

Pollution and pollutant transport in the geosphere - An introduction to the symposium

Environmental research in earth sciences is focused on the geosphere, i.e. (1) waters and sediments of rivers, lakes and oceans, and (2) soils and underlying shallow rock formations,both water-unsaturated and -saturated. The subsurface is studied down to greater depths at sites where waste repositories or tunnels are planned and mining activities exist. In recent years, earth scientists have become more and more involved in pollution problems related to their classical field of interest, e.g. groundwater, ore deposits, or petroleum and non-metal natural deposits (gravel, clay, cement precursors). Major pollutants include chemical substances, radioactive isotopes and microorganisms. Mechanisms which govern the transport of pollutants are of physical, chemical (dissolution, precipitation, adsorption), or microbiological (transformation) nature. Land-use planning must reflect a sustainable development and sound scientific criteria. Today's environmental pollution requires working teams with an interdisciplinary background in earth sciences, hydrology, chemistry, biology, physics as well as engineering. This symposium brought together for the first time in Switzerland earth and soil scientists, physicists and chemists, to present and discuss environmental issues concerning the geosphere.

Defining responses to therapy and study outcomes in clinical trials of invasive fungal diseases: Mycoses Study Group and European Organization for Research and Treatment of Cancer consensus criteria.

Invasive fungal diseases (IFDs) have become major causes of morbidity and mortality among highly immunocompromised patients. Authoritative consensus criteria to diagnose IFD have been useful in establishing eligibility criteria for antifungal trials. There is an important need for generation of consensus definitions of outcomes of IFD that will form a standard for evaluating treatment success and failure in clinical trials. Therefore, an expert international panel consisting of the Mycoses Study Group and the European Organization for Research and Treatment of Cancer was convened to propose guidelines for assessing treatment responses in clinical trials of IFDs and for defining study outcomes. Major fungal diseases that are discussed include invasive disease due to Candida species, Aspergillus species and other molds, Cryptococcus neoformans, Histoplasma capsulatum, and Coccidioides immitis. We also discuss potential pitfalls in assessing outcome, such as conflicting clinical, radiological, and/or mycological data and gaps in knowledge.