Controle aplicado a poços com método de elevação e bombeio centrífugo submerso

The Electrical Submersible Pumping is an artificial lift method for oil wells employed in onshore and offshore areas. The economic revenue of the petroleum production in a well depends on the oil flow and the availability of lifting equipment. The fewer the failures, the lower the revenue shortfall and costs to repair it. The frequency with which failures occur depends on the operating conditions to which the pumps are submitted. In high-productivity offshore wells monitoring is done by operators with engineering support 24h/day, which is not economically viable for the land areas. In this context, the automation of onshore wells has clear economic advantages. This work proposes a system capable of automatically control the operation of electrical submersible pumps, installed in oil wells, by an adjustment at the electric motor rotation based on signals provided by sensors installed on the surface and subsurface, keeping the pump operating within the recommended range, closest to the well s potential. Techniques are developed to estimate unmeasured variables, enabling the automation of wells that do not have all the required sensors. The automatic adjustment, according to an algorithm that runs on a programmable logic controller maintains the flow and submergence within acceptable parameters avoiding undesirable operating conditions, as the gas interference and high engine temperature, without need to resort to stopping the engine, which would reduce the its useful life. The control strategy described, based on modeling of physical phenomena and operational experience reported in literature, is materialized in terms of a fuzzy controller based on rules, and all generated information can be accompanied by a supervisory system

O princípio constitucional da eficiência aplicado à outorga e à cobrança da água produzida na exploração petrolífera

Water production is unavoidable during a petrol well s lifetime. The amount of produced water associated with oil varies a lot. It can reach values which account to 50% in volume up to nearly 100%, at the end of the well s economic life. It could be verified that, once the water reaches the productive wells, there must be a management of this produced water. Its destiny is defined after a precise study, after which the best option is chosen between relieving it into the environment, re-injecting it into the producing container or disposing it into non-producing formations. Whichever option is made by the involved professionals, after the necessary analysis, it shall consider, besides the technical and economical aspects, also the alternatives which entail less environmental impact. The purpose of the present research is to conduct a study about the application of the constitutional principle of efficiency on the instruments worked out by the public administration on water management, specifically the water use licence and charging for the use in the management of water resources applicable to water production at the petrol wells. In this attempt, before entering the proper approach of the efficiency of the mentioned instruments, it was necessary not only bring to light the doctrinal perception about the constitutional principle of administrative efficiency, but also make some considerations concerning to the structure of the national water resources management, set by the Federal Constitution (1988) and the federal legislation (9433/97)

Morfologia de frutos de goiabeira

A eficiência na absorção de nutrientes pelos frutos pode sofrer interferências em função da estrutura morfológica presente. Assim, frente à importância do conhecimento da morfologia dos frutos para um manejo mais adequado dos pomares em termos de adubação foliar, ou de tratamentos pós-colheita para ampliar a vida útil dos mesmos, desenvolveu-se o presente estudo, cujo objetivo foi descrever a morfologia do pericarpo dos frutos de goiabeira. Para isto, amostras do pericarpo de goiabas (cv. Paluma) foram observadas ao microscópio ótico e eletrônico de varredura. Algumas das características observadas, como a presença de cutícula espessa, cêra epicuticular, três camadas subepidérmicas de células compactas e grande quantidade de esclereídeos, bem como a presença esporádica e dispersa de estômatos, podem constituir-se em barreiras para a absorção e movimentação de nutrientes e substâncias aplicadas aos frutos de goiabeira.

Conservação e qualidade de mangas 'Palmer' submetidas a tratamento com fungicidas e hidrotérmico

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Preservation of minimally processed aurora-1 peaches using additives

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação física e química de produtos minimamente processados de abacaxi-'Pérola'

O objetivo deste trabalho foi avaliar, física e quimicamente, produtos minimamente processados de abacaxi-'Pérola', rodelas e metades, armazenados sob diferentes temperaturas (3ºC, 6ºC e 9ºC). Frutos selecionados, quanto ao grau de maturação e ausência de danos, foram lavados, desinfeccionados com cloro (200 mg.L-1) e armazenados a 10ºC, por 12 horas, antes do processamento. O produto minimamente processado foi embalado em bandejas de isopor recobertas com filme de PVC esticável (metades) ou bandejas de tereftalato de polietileno (rodelas) e armazenado sob refrigeraç ;ão, com avaliação a cada 3 dias, quanto à textura, coloração, pH, e conteúdos de sólidos solúveis totais, acidez total titulável, ácido ascórbico e de açúcares, solúveis e redutores. Durante o armazenamento, o produto tornou-se menos firme, e sua polpa apresentou escurecimento. Os conteúdos de açúcares solúveis e redutores e de sólidos solúveis totais não foram afetados pelo tipo de preparo, temperatura ou embalagem. Os teores de acidez total titulável aumentaram e foram influenciados pela temperatura, sendo que os mantidos a 9ºC apresentaram os maiores teores, havendo, como conseqüência, decréscimo no pH. Os produtos armazenados a 9ºC também apresentaram evolução mais rápida no escurecimento, na redução do teor de ácido ascórbico e menor vida útil (6 dias), enquanto, para os armazenados a 3ºC e 6ºC, este período foi de 9 dias. Os resultados obtidos permitiram concluir que a temperatura de armazenamento foi o fator limitante para a vida útil destes produtos.

Uso de tratamento hidrotérmico e ácido clorídrico na qualidade de lichia 'Bengal'

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Identificação das condições gerais de conservação dos reservatórios integrantes do sistema de abastecimento de água de Natal

Infrastructure works are included in strategic areas for the social development. For that matter that all of the investments are very important for the social development. When the population has enough water and an acceptable quality, and it includes a wastewater gathering and its treatment, the whole society became less susceptible to the water diseases. Even the Water Supply and the Sewage depend for its perfect operation of reservoirs, or of the accumulation of water to provide the popular necessity, either due to retention or for the treatment wastewarer. These structures present very specific environmental conditions, because the microclimate created around them, like high environmental humidity and for the existence of many harmful substances for the concrete, such as chloride ions presents in water. The reservoir that compose the System of Water Supply of Natal were built between 1970s and 1980s, a period whom the technical and scientific community did not have in-depth studies about the reinforced concrete mechanism of deterioration. Therefore, these reservoirs have been suffered accelerated deterioration progress, and they have been shown many pathological manifestations strikingly visible. In front of all these problems this academic work aims to identify the generally conditions of conservation of all the reservoirs components of the Water Supply System of Natal. This academic work objectives to develop a recuperation plan for use in these reservoirs, in this academic work it was achieved all the survey of pathological manifestation existing in each reservoir. It was made with local visits, photographic recorders of all manifestations viii and realization of in loco tests. The other step consisted in a application of GDE/UnB metodolgy reformulated by Fonseca (2007). In the step of local visits in each reservoir it was evaluated carbonation depth, by spreading a phenolphthalein solution with 1% of concentration; evaluation of contamination of chlorides, by spreading silver nitrate solution with 1% of concentration, and evaluation of width cracks. After the conclusion of all the testings, it was established that all reservoir, studied in this academic work, have showed an advanced deteriorating condition. It´s presents prevalent pathological manifestations as unacceptable cracks, spots, efflorescence and reinforcement corrosion, and in some cases, chlorides contamination. After the conclusion of the testings and its concatenation it was able to implementing, using GDE/UnB methodology, the order of the restoration its service life and initial safety conditions

Modelagem de dados de falhas de equipamentos de sub-superfície em poços de petróleo da Bacia Potiguar

This master´s thesis presents a reliability study conducted among onshore oil fields in the Potiguar Basin (RN/CE) of Petrobras company, Brazil. The main study objective was to build a regression model to predict the risk of failures that impede production wells to function properly using the information of explanatory variables related to wells such as the elevation method, the amount of water produced in the well (BSW), the ratio gas-oil (RGO), the depth of the production bomb, the operational unit of the oil field, among others. The study was based on a retrospective sample of 603 oil columns from all that were functioning between 2000 and 2006. Statistical hypothesis tests under a Weibull regression model fitted to the failure data allowed the selection of some significant predictors in the set considered to explain the first failure time in the wells

Análise das relações da curva de crescimento e eficiência produtiva de vacas da raça Holandesa

O objetivo neste trabalho foi analisar as relações entre parâmetros da curva de crescimento (peso à maturidade e taxa de maturação) e medidas da eficiência produtiva de 333 vacas da raça Holandesa nascidas de 1992 a 2002. Dados de idade ao primeiro parto, produção de leite e duração da primeira lactação, primeiro intervalo de partos e produção de leite por dia de intervalo de partos foram analisados por meio de um modelo linear generalizado com o efeito fixo de grupo contemporâneo (ano-estação de nascimento), os efeitos aleatórios de pai da vaca e erro e os efeitos lineares e quadráticos do peso à maturidade e da taxa de maturação. Nas análises de longevidade e de duração da vida útil, incluiu-se o efeito fixo de motivo de descarte da vaca. Houve efeitos linear e quadrático da taxa de maturação sobre a maioria das características, exceto o primeiro intervalo de partos e a produção de leite por dia de intervalo de partos. As estimativas das taxas de maturação ótimas variaram de 0,0896 a 0,1187 kg/kg de peso vivo/mês. O peso à maturidade influenciou a longevidade de forma linear e quadrática. A combinação ótima foi de 701 kg de peso à maturidade e 0,0934 kg/kg de peso vivo/mês de taxa de maturação. O peso à maturidade correlacionou-se de forma desfavorável com a duração da primeira lactação (-0,11). Coeficientes de correlação significativos foram obtidos entre taxa de maturação e idade ao primeiro parto (-0,22), produção de leite na primeira lactação (0,18), duração da primeira lactação (0,18) e longevidade (0,14), o que confirma a hipótese de que vacas com taxas de maturação mais rápidas apresentam maior eficiência produtiva.

Tratamento térmico na manutenção da coloração de lichias

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Roteamento em Redes de Sensores Sem Fios Com Base Em Aprendizagem Por Reforço

The use of wireless sensor and actuator networks in industry has been increasing past few years, bringing multiple benefits compared to wired systems, like network flexibility and manageability. Such networks consists of a possibly large number of small and autonomous sensor and actuator devices with wireless communication capabilities. The data collected by sensors are sent directly or through intermediary nodes along the network to a base station called sink node. The data routing in this environment is an essential matter since it is strictly bounded to the energy efficiency, thus the network lifetime. This work investigates the application of a routing technique based on Reinforcement Learning s Q-Learning algorithm to a wireless sensor network by using an NS-2 simulated environment. Several metrics like energy consumption, data packet delivery rates and delays are used to validate de proposal comparing it with another solutions existing in the literature

Caracterização de escovas de grafite e avaliação do seu desempenho em função da microestrutura

The electric can be converted into thermal, luminous, electromagnetic, and also in mechanical energy. In this context the electric engines plays a fundamental role, specially that they work very below of its nominal capacity, with consequent decrease load density. In industrial environment, these characteristics of work of DC engines had also generated an extreme consumption of coal brushs and attack in the commutator reducing the useful life of the engine and increasing maintenance demand and cost. The general objective of the present work is to study the influence of the granulometry of the coal brush used in DC engines with the resistance to the consumption of the same ones, as well as in the performance presented by the commutator of the engine. Additionally, determining the measurable and not measurable profits when the brush used is adjusted to the application. The brushes had been produced by an industry of the sector and tested in industrial environment to evaluate their performance and consumption. Preliminary results evidence a substantial improvement in the performance of these brushes in function of its microstructure and the application in which it is used

Desenvolvimento de um sistema para análise de integridade estrutural de equipamentos estáticos baseado em cad vps micro cracks e ultrassom

In general, the designs of equipment takes into account the effects and processes of deterioration it will undergo and arrives at an approximate useful life. However, changes in operational processes and parameters, the action of external agents, the kind of maintenance conducted, the means of monitoring, and natural and accidental occurrences completely modify the desired performance of the equipment. The discontinuities that occur in anisotropic materials often and due to different factors evolve from being subcritical to critical acquiring the status of defect and compromising the physical integrity of the equipment. Increasingly sophisticated technological means of detection, monitoring and assessment of these discontinuities are required to respond ever more rapidly to the requirements of industry. This paper therefore presents a VPS (Virtual Pipe System) computational tool which uses the results of ultrasonic tests on equipment, plotting the discontinuities found in models created in the CAD and CAE systems, and then simulates the behavior of these defects in the structure to give an instantaneous view of the final behavior. This paper also presents an alternative method of conventional ultrasonic testing which correlates the integrity of an overlay (carbon steel and stainless steel attached by welding) and the reflection of ultrasonic waves coming from the interface between the two metals, thus making it possible to identify cracks in the casing and a shift of the overlay

Estudo de um secador solar fabricado apartir de sucata de tambor de polietileno

The scarcity of farmland, reducing the supply of irrigation water and lack of technologies for conservation, makes the globalized world facing serious difficulties in the production of food for its population. The most viable outlet for this dilemma is the dissemination of technologies, economically viable and available to the whole population, for dehydration of perishable foods produced. This paper presents a solar dryer of direct exposure to the production of dried fruit, made from recycled polyethylene drum of 200 liters, used for storing water or trash. The drum was sectioned in half in its longitudinal axis and has its halves together forming a trough-like structure. It describes the processes of construction and assembly of solar dryer proposed, whose main characteristic its low cost, and was designed for use by people with low income, for processing fruits widely available in our region (mango, banana, guava, cashew, pineapple, tomato and others) in dried fruit and flour, contributing significantly to increase the life of these foods. The nuts and flours can be used for own consumption and for marketing jobs and income generation. Tests were conducted to diagnose the feasibility of using solar dryer for the various types of tropical fruits. Were also compared parameters such as drying times and thermal efficiency obtained with the prototype found in the specialized literature in food dehydration. The drying times in the dryer were obtained competitive with those obtained in other models of dryers LMHES developed