A study of the effects of PVAC on works of art on paper and wood: pH and colour change

This paper presents the preliminary findings of pH and colour measurements carried out on artworks on paperand on wood that had been treated with a poly(vinyl acetate) (PVAC) based adhesive in the 1980s. In both cases, areas treated with PVAC proved to be less acidic than untreated areas. Contrary to expectations, the conservation treatments have not, as yet, increased acidity levels in the objects under study. Colour measurements of the works on paper showed that those that had been backed with a cotton fabric using a mixture of methylcellulose and PVAC were less yellow than those from the same print run that had not been backed. This finding suggests that the backing somehow prevented the natural degradation of the support. In view of these preliminary results, further research is clearly needed. This study forms part of a broader ongoing project to assess the role of PVAC in the conservation of a range of cultural assets.

Workers exposed to wood dust have an increased micronucleus frequency in nasal and buccal cells: results from a pilot study

Wood dust is recognised as a human carcinogen, based on the strong association of wood dust exposure and the elevated risk of malignant tumours of the nasal cavity and paranasal sinuses [sino-nasal cancer (SNC)]. The study aimed to assess genetic damage in workers exposed to wood dust using biomarkers in both buccal and nasal cells that reflect genome instability events, cellular proliferation and cell death frequencies. Nasal and buccal epithelial cells were collected from 31 parquet layers, installers, carpenters and furniture workers (exposed group) and 19 non-exposed workers located in Switzerland. Micronucleus (MN) frequencies were scored in nasal and buccal cells collected among woodworkers. Other nuclear anomalies in buccal cells were measured through the use of the buccal micronucleus cytome assay. MN frequencies in nasal and buccal cells were significantly higher in the exposed group compared to the non-exposed group; odds ratio for nasal cells 3.1 [95% confidence interval (CI) 1.8-5.1] and buccal cells 1.8 (95% CI 1.3-2.4). The exposed group had higher frequencies of cells with nuclear buds, karyorrhectic, pyknotic, karyolytic cells and a decrease in the frequency of basal, binucleated and condensed cells compared to the non-exposed group. Our study confirms that woodworkers have an elevated risk for chromosomal instability in cells of the aerodigestive tract. The MN assay in nasal cells may become a relevant biomonitoring tool in the future for early detection of SNC risk. Future studies should seek to standardise the protocol for MN frequency in nasal cells similar to that for MN in buccal cells.

Livin on chinese rocks

Luettua

Influence of silvicultural regime on wood structure characteristics and mechanical properties of clear wood in Pinus sylvestris

Abstract

Effect of compression wood on surface roughness and surface absorption of medium density fiberboard

Abstract

Effect of thinning on stem form and wood characteristics of teak (Tectona grandis) in a humid tropical site in Costa Rica

Abstract

Cholesterol regulates Syntaxin 6 trafficking at the TGN-endosomal boundaries

Inhibition of cholesterol export from late endosomes causes cellular cholesterol imbalance, including cholesterol depletion in the trans-Golgi network (TGN). Here, using Chinese hamster ovary (CHO) Niemann-Pick type C1 (NPC1) mutant cell lines and human NPC1 mutant fibroblasts, we show that altered cholesterol levels at the TGN/endosome boundaries trigger Syntaxin 6 (Stx6) accumulation into VAMP3, transferrin, and Rab11-positive recycling endosomes (REs). This increases Stx6/VAMP3 interaction and interferes with the recycling of αVβ3 and α5β1 integrins and cell migration, possibly in a Stx6-dependent manner. In NPC1 mutant cells, restoration of cholesterol levels in the TGN, but not inhibition of VAMP3, restores the steady-state localization of Stx6 in the TGN. Furthermore, elevation of RE cholesterol is associated with increased amounts of Stx6 in RE. Hence, the fine-tuning of cholesterol levels at the TGN-RE boundaries together with a subset of cholesterol-sensitive SNARE proteins may play a regulatory role in cell migration and invasion.

Wood ants use resin to protect themselves against pathogens

Social life is generally associated with an increased exposure to pathogens and parasites, due to factors such as high population density, frequent physical contact and the use of perennial nest sites. However, sociality also permits the evolution of new collective behavioural defences. Wood ants, Formica paralugubris, commonly bring back pieces of solidified coniferous resin to their nest. Many birds and a few mammals also incorporate green plant material into their nests. Collecting plant material rich in volatile compounds might be an efficient way to fight bacteria and fungi. However, no study has demonstrated that this behaviour has a positive effect on survival. Here, we provide the first experimental evidence that animals using plant compounds with antibacterial and antifungal properties survive better when exposed to detrimental micro-organisms. The presence of resin strongly improves the survival of F. paralugubris adults and larvae exposed to the bacteria Pseudomonas fluorescens, and the survival of larvae exposed to the entomopathogenic fungus Metarhizium anisopliae. These results show that wood ants capitalize on the chemical defences which have evolved in plants to collectively protect themselves against pathogens.

Cutting of Frozen Wood

The objective of this master's thesis was to develop a system for measuring the cutting forces of frozen wood. In northern parts of the world cuttingof frozen wood is one of the major problem. During winter and early spring the temperature inside the wood cells will fall below Zero degrees that strongly influences on the properties of the wood. These variations of properties will effects on the blade nomenclature while cutting the frozen wood. However the end results will cause uneven cutting forces. Cutting forces, Chip formation, wearing of the blade and the quality of the machined surface are difficult task. In this project we are attempting to find the variation of cutting forces and properties of frozen wood at four different temperatures (-20 , -10, 0 and + 10 degrees). The linear planning machine was used for measuring the cuttingforces. The cutting was done parallel to the long axis of wood due to the nature of pine wood and the structure of the plane. A considerable amount of work andtime was used for collecting and processing the numerical information from the sensors of the measuring system. There were some alterations suggested to the construction of the plane and the sensor system.

A Feasibility Study of a Pelleting Plant as an Option for By Product Upgrading in Wood-Processing Industry

Tämän kannattavuustutkimuksen lähtökohtana oli se, että Yhtyneet Sahat Oy:n Kaukaan sahalla ja Luumäen jatkojalostuslaitoksella haluttiin selvittää pellettitehtaan kannattavuus nykyisessä markkinatilanteessa. Tämä työon luonteeltaan teknis-taloudellinen selvitys eli ns. feasibility study. Pelletöintiprosessi on tekniikaltaan yksinkertainen eikä edellytä korkea teknologian laitteita. Toimiala on maailmanlaajuisesti varsin uusi. Suomessa pellettimarkkinat ovat vielä pienet ja kehittymättömät, mutta kasvua on viime vuosina tapahtunut. Valtaosa kotimaan tuotannosta menee vientiin. Investoinnin laskentaprosessissa saadut tuotannon alkuarvot sekä kustannusrakenteen määrittelyt ovat perustana varsinaisille kannattavuuslaskelmille. Laskelmista on selvitetty investointeihin liittyvät yleisimmät taloudelliset tunnusluvut ja herkimpiä muuttujia on tutkittu ja pohdittu herkkyysanalyysiä apuna käyttäen.

Testing Weak-Form Efficiency of the Chinese Stock Market

Tämän tutkielman tavoitteena on tarkastella Kiinan osakemarkkinoiden tehokkuutta ja random walk -hypoteesin voimassaoloa. Tavoitteena on myös selvittää esiintyykö viikonpäiväanomalia Kiinan osakemarkkinoilla. Tutkimusaineistona käytetään Shanghain osakepörssin A-sarjan,B-sarjan ja yhdistelmä-sarjan ja Shenzhenin yhdistelmä-sarjan indeksien päivittäisiä logaritmisoituja tuottoja ajalta 21.2.1992-30.12.2005 sekä Shenzhenin osakepörssin A-sarjan ja B-sarjan indeksien päivittäisiä logaritmisoituja tuottoja ajalta 5.10.1992-30.12.2005. Tutkimusmenetelminä käytetään neljä tilastollista menetelmää, mukaan lukien autokorrelaatiotestiä, epäparametrista runs-testiä, varianssisuhdetestiä sekä Augmented Dickey-Fullerin yksikköjuuritestiä. Viikonpäiväanomalian esiintymistä tutkitaan käyttämällä pienimmän neliösumman menetelmää (OLS). Testejä tehdään sekä koko aineistolla että kolmella erillisellä ajanjaksolla. Tämän tutkielman empiiriset tulokset tukevat aikaisempia tutkimuksia Kiinan osakemarkkinoiden tehottomuudesta. Lukuun ottamatta yksikköjuuritestien saatuja tuloksia, autokorrelaatio-, runs- ja varianssisuhdetestien perusteella random walk-hypoteesi hylättiin molempien Kiinan osakemarkkinoiden kohdalla. Tutkimustulokset osoittavat, että molemmilla osakepörssillä B-sarjan indeksien käyttäytyminenon ollut huomattavasti enemmän random walk -hypoteesin vastainen kuin A-sarjan indeksit. Paitsi B-sarjan markkinat, molempien Kiinan osakemarkkinoiden tehokkuus näytti myös paranevan vuoden 2001 markkinabuumin jälkeen. Tutkimustulokset osoittavat myös viikonpäiväanomalian esiintyvän Shanghain osakepörssillä, muttei kuitenkaan Shenzhenin osakepörssillä koko tarkasteluajanjaksolla.

Propagation of the Ignition Front against Airflow in Packed Beds of Wood Particles

Combustion of wood is increasing because of the needs of decreasing the emissions of carbon dioxide and the amount of waste going to landfills. Wood based fuels are often scattered on a large area. The transport distances should be short enough to prevent too high costs, and so the size of heating and power plants using wood fuels is often rather small. Combustion technologies of small-size units have to be developed to reach efficient and environmentally friendly energy production. Furnaces that use different packed bed combustion or gasification techniques areoften most economic in small-scale energy production. Ignition front propagation rate affects the stability, heat release rate and emissions of packed bed combustion. Ignition front propagation against airflow in packed beds of wood fuels has been studied. The research has been carried out mainly experimentally. Theoretical aspects have been considered to draw conclusions about the experimental results. The effects of airflow rate, moisture content of the fuel, size, shape and density of particles, and porosity of the bed on the propagation rate of the ignition front have been studied. The experiments were carried out in a pot furnace. The fuels used in the experiments were mainly real wood fuels that are often burned in the production of energy. The fuel types were thin wood chips, saw dust, shavings, wood chips, and pellets with different sizes. Also a few mixturesof the above were tested. Increase in the moisture content of the fuel decreases the propagation rates of the ignition front and makes the range of possible airflow rates narrower because of the energy needed for the evaporation of water and the dilution of volatile gases due to evaporated steam. Increase in the airflow rate increases the ignition rate until a maximum rate of propagation is reached after which it decreases. The maximum flame propagation rate is not always reached in stoichiometric combustion conditions. Increase in particle size and density transfers the optimum airflow rate towards fuel lean conditions. Mixing of small and large particles is often advantageous, because small particles make itpossible to reach the maximum ignition rate in fuel rich conditions, and large particles widen the range of possible airflow rates. A correlation was found forthe maximum rate of ignition front propagation in different wood fuels. According to the correlation, the maximum ignition mass flux is increased when the sphericity of the particles and the porosity of the bed are increased and the moisture content of the fuel is decreased. Another fit was found between sphericity and porosity. Increase in sphericity decreases the porosity of the bed. The reasons of the observed results are discussed.

Short communication.Wood identification based on their common name and their transversal surface anatomy. Application to the batch from the expedition of Ruiz and Pavon

Aim of study: To identify species of wood samples based on common names and anatomical analyses of their transversal surfaces (without microscopic preparations). Area of study: Spain and South America Material and methods: The test was carried out on a batch of 15 lumber samples deposited in the Royal Botanical Garden in Madrid, from the expedition by Ruiz and Pavon (1777-1811). The first stage of the methodology is to search and to make a critical analysis of the databases which list common nomenclature along with scientific nomenclature. A geographic filter was then applied to the information resulting from the samples with a more restricted distribution. Finally an anatomical verification was carried out with a pocket microscope with a magnification of x40, equipped with a 50 micrometers resolution scale. Main results: The identification of the wood based exclusively on the common name is not useful due to the high number of alternative possibilities (14 for “naranjo”, 10 for “ébano”, etc.). The common name of one of the samples (“huachapelí mulato”) enabled the geographic origin of the samples to be accurately located to the shipyard area in Guayaquil (Ecuador). Given that Ruiz y Pavon did not travel to Ecuador, the specimens must have been obtained by Tafalla. It was possible to determine correctly 67% of the lumber samples from the batch. In 17% of the cases the methodology did not provide a reliable identification. Research highlights: It was possible to determine correctly 67% of the lumber samples from the batch and their geographic provenance. The identification of the wood based exclusively on the common name is not useful.

Reconceptualizing Chinese state-owned entreprise in Africa : double embeddedness and localization in Ghana

Challenging the view of asymmetrical power relations between China and Africa, this thesis questions the "Chinese comparative advantages" (monolithic state power and economic advantages) of Chinese state-owned enterprises (SOEs) in Africa. It argues that the power dynamics between Chinese and African actors are dialectical and pluralistic, with localized social capital representing the true Chinese competitive advantage in Africa. Based on ethnographical fieldwork conducted in Ghana, this thesis shows that Chinese SOEs pursue their globalization in a double context - that of the deliberate "retreat" of the Chinese state, and more importantly, that of Ghanaian governance and society (characterized by political party patronage, extraversion dynamics, and worker agency). The trajectories of Chinese expatriates' expatriation/ social promotion and their SOEs' globalization/ localization are mutually influenced and reinforced. By cultivating local relationships and knowledge, a provincial Chinese SOE in Ghana can outperform a large Chinese central SOE, even if the latter has more support from the Chinese state. Moreover, the recent effort to build a "socially acceptable Chinese community" in Ghana has renewed the power dynamics between the Chinese state and the SOEs. All these observations provide for constructing a new perspective of Chinese SOEs in Africa - a "second-class" Chinese globalization - the SOEs may begin with few privileges, but promotion over time is possible. -- A contre pied des approches postulant des relations de pouvoir asymétriques entre la Chine et l'Afrique, cette thèse interroge les « avantages comparatifs chinois » (pouvoir de l'État monolithique et avantages économiques) des entreprises publiques chinoises (EPC) en Afrique. Elle soutient l'idée selon laquelle les dynamiques de pouvoir entre les acteurs chinois et africains est dialectique et pluraliste, et le capital social localisé étant le véritable avantage compétitif chinois en Afrique. S'appuyant sur un travail de terrain ethnographique au Ghana, cette thèse montre que les EPC poursuivent leur mondialisation dans un double contexte - celui de la «retraite» délibérée de l'État chinois, et, de façon plus importante, celui de la gouvernance et de la société ghanéennes (caractérisées par un clientélisme des partis politiques, une dynamique d'extraversion et le pouvoir de négociation des travailleurs). Les trajectoires d'expatriation / de promotion sociale des expatriés chinois et la mondialisation / localisation de leurs EPC s'influencent et se renforcent mutuellement. En cultivant des relations et des connaissances locales, une EPC provinciale au Ghana peut surpasser une grande EPC centrale, même si cette dernière reçoit plus de soutien de l'État chinois. En outre, les efforts récents visant à construire une «communauté chinoise socialement acceptable» au Ghana ont renouvelé la dynamique du pouvoir entre l'État chinois et les EPC. Ces observations permettent de construire une nouvelle perspective des EPC en Afrique - la globalisation chinoise de « deuxième classe » - les EPC peuvent débuter avec peu de privilèges, mais leur promotion reste possible avec le temps.