Use of raw Euphorbia tirucalli extract for inhibition of ascitic Ehrlich tumor

Objective: to evaluate the effect of the Euphorbia tirucalli hydroalcoholic extract (ETHE) on the development of Ehrlich Tumor, in its ascitic form. Methods: we intraperitoneally inoculated 15 Swiss mice with 10.44 x 107 cells of Ehrlich Tumor and divided them in two groups one day after: ETHE Group (eight mice), treated with a dosage of 125 mg/kg/day of EHTE for five days; and Control Group (seven mice), treated only with 0.9% isotonic saline solution over the same period. The treatment was done by gavage. Ten days after inoculation, four mice from each group were sacrificed for quantification of tumor cell number, ascitic fluid volume and bone marrow cell number. The remaining animals were maintained to evaluate survival. Results: The ascitic fluid volume and the tumor cell number were decreased in the ETHE group when compared with the control group, but with no statistical significance. On the other hand, survival was higher in the ETHE group, as well as the number of bone marrow cells. Conclusion: Treatment with ETHE after inoculation of Ehrlich Tumor decreases its development and increases survival and the bone marrow cellularity, thus reducing the myelosuppression present in the Ehrlich Tumor bearing mice.

Analysis of Escherichia coli isolated from bovine mastitic milk

Mastitis has been recognized for some time as the most costly disease in dairy herds. From February to November 2004, 670 samples of bovine mastitic milk from which 231 Escherichia coli strains were isolated, were collected from two Brazilian states. The strains were screened for the presence of Shiga toxin-producing (stx 1 and stx 2) and intimin (eae) genes. Twenty (8.6%) strains were detected by PCR to harbor the Shiga toxin genes (8 the stx 1 gene, 12 the stx 2 gene and none both of them). Two (0.8%) of the Escherichia coli strains studied were eae positive non Shiga toxin-producing. The strains were also examined for resistance to 12 antimicrobial agents. The predominantly observed resistance was to tetracycline (92.2%), streptomycin (90.4%), nalidixic acid (88.3%), amikacin (86.5%) and cephalothin (84.8%). Multidrug resistance was found among 152 isolates (65.8%).

Breed and season influence on milk quality parameters and in mastitis occurrence

The aims of the present study were to evaluate the performance of Jersey and Holstein cows under different rainfall conditions (dry and rainy seasons) by monitoring aspects related to subclinical mastitis (somatic cell count, microbiological isolation, type of isolated pathogen), milk quality (lactose, protein, fat, total solids) and production (mean milk production) of both breeds. The study was carried out in a dairy farm located in the state of São Paulo, Brazil. Eight visitations were done to the farm, four in a period of high rainfall and four in a period of low rainfall. Milk samples were collected from 79 Holstein cows and 37 Jersey cows for electronic somatic cell count and determination of the main milk components (protein, fat, total solids, lactose). Milk fat, protein, total solids and production were influenced by breed and the season, with similar tendencies for both breeds in both seasons. Somatic cell count (SCC) showed similar results for both breeds. Holstein cows with intramammary infections (IMI) presented a higher increase in SCC when compared to Jersey cows (P<0.001). In the dry season, 53 animals had IMI in at least one month during the study, which 32 were Holstein and 21 were Jersey cows. In the rainy season, 65 animals had intramammary infection, being 43 Holstein and 22 Jersey cows. The frequency of IMI cases was larger in the rainy season than in the dry season. Jersey cows had a lower chance of showing IMI signs and symptoms than Holstein cows in the rainy season (odds ratio=0.52). The larger number of IMI cases in the rainy season may have led to a lower milk lactose rate for both breeds, thus milk lactose rate can be considered an indicator of IMI status. There was prevalence of contagious pathogens overall in the study. The applied model showed that environmental pathogens were more frequently isolated from the breed Jersey, regardless of the study season. There seems to be differences in the immune response of Jersey and Holstein breeds.

Sanitizer residues in the milk of cows which had passed through footbaths

Copper sulfate and sodium hypochlorite are used in footbath solutions for the prevention and treatment of bovine digital diseases; however, data on the residues of such elements in milk are sparse in Brazil. This study evaluated the cost of applying the footbath treatment and the total amount of copper and chlorite residues in the milk of healthy cows after they had passed through these footbath solutions. Two groups of 7 cows each (GI and GII) were studied. In the case of GI, 1% sodium hypochlorite was used and for GII 5% copper sulfate was employed in the footbath. The milk samples were collected before the 7-day footbath treatment period (M0) and 24 h (M1), 48 h (M2), 72 h (M3) and 15 days (M15) after the last footbath. Statistical analysis to compare the different samples within each group was carried out by applying Friedman's test, followed by Dunn's test (p<0.05). It was concluded that the amount of total chlorites and copper in the milk of healthy cattle after routine daily footbaths for a period of 7 days presented some variations. However, the concentrations observed were considered insufficient to represent a risk to human health. The cost of the footbath solutions was found to be reasonable.

Mycoplasma agalactiae in semen and milk of goat from Pernambuco state, Brazil

In goat and sheep flocks, mycoplasmosis is a disease that may cause severe economical losses associated with polyarthritis, mastitis, agalactia, conjunctivitis, pneumonia and reproductive failure. The latter may involve repeat breeding, granular vulvovaginitis, infertility and abortions. The aim of the present study was to assess the occurrence of Mycoplasma agalactiae (Ma) in semen and milk samples from naturally infected goat in the semiarid region from Pernambuco State, Northeast from Brazil. Thirty-nine semen samples and 81 milk samples were submitted to DNA extraction using a commercially available kit and following the manufacturer's instructions. The polymerase chain reaction (PCR) was then performed in accordance with protocols described in the literature. The results of the present study revealed the presence of Ma in the DNA of 17.9% (7/39) of the semen samples and 3.7% (3/81) of the milk samples. The results obtained in the present study confirm the elimination of the DNA of Ma in the semen and milk samples. The presence of this agent in goat flocks is considered very risky in terms of reproductive disorders and contagious agalactia outbreaks in the Northeast region of Brazil.

Acid-base balance of dairy cows and its relationship with alcoholic stability and mineral composition of milk

This study aimed to associate the occurrence of acid-base disorders with the alcoholic stability of milk from animals in the field, and to evaluate differences between the mineral composition of milk that was both stable and unstable in alcohol. The sample comprised 96 dairy cows, where the milk and blood of each corresponding animal was collected. The mineral composition of stable and unstable milk in alcohol was different and may be related to acid-base disturbances. The average amount of phosphate was lower in the milk that was unstable in alcohol, while potassium was greater. Frequency of the alcoholically unstable milk cases was higher in the cows with acid-base disturbances. Respiratory alkalosis was the disorder that was most observed.

Elimination of the tremorgenic toxin of Ipomoea asarifolia by milk

With the aim to determine if the tremorgenic toxin of Ipomoea asarifolia is eliminated in milk, three groups of Swiss female mice received, immediately after giving birth until weaning, a ration containing 20% or 30% of dry I. asarifolia. All the offspring of the females that received 20% or 30% I. asarifolia showed tremors 2-4 days after birth. The offspring of the females that received 20% I. asarifolia recovered 4-7 days after weaning. The offspring of the females that received 30% of the plant in the ration died while showing tremors before weaning or up to two days after weaning. It is concluded that the tremorgenic compound of I. asarifolia or its toxic metabolites are eliminated in milk, and that lactating mice may be used as a model for the determination of the toxic compound(s) in this plant.

Expression of CD14 and toll-like receptors 2 and 4 by milk neutrophils in bovine mammary glands infected with Corynebacterium bovis

This study evaluated the expression of CD14, toll-like receptor (TLR) 2 and TLR4 on the surface of milk neutrophils in bovine mammary glands infected with Corynebacterium bovis. Here, we used 23 culture-negative control quarters with no abnormal secretion on the strip cup test and milk somatic cell count lower than 1x105 cells/mL, and 14 C. bovis infected quarters. The identification of neutrophils, as well as, the percentage of neutrophils that expressed CD14, TLR2 and TLR4 were analyzed by flow cytometry using monoclonal antibodies. The present study encountered no significant difference in the percentages of milk neutrophils that expressed TLR2 and TLR4 or in the expression of TLR4 by milk neutrophils. Conversely, a lower median fluorescence intensity of TLR2 in milk neutrophils was observed in C. bovis-infected quarters. The percentage of neutrophils that expressed CD14 and the median fluorescence intensity of CD14 in milk neutrophils was also lower in C. bovis-infected quarters.

Partial budget analysis of prepartum antimicrobial therapy and Escherichia coli J5 vaccination of dairy heifers and their effect on milk production and milk quality parameters

Abstract: This study aimed to determine whether prepartum antimicrobial and/or Escherichia coli J5 vaccination in dairy heifers influence the milk production, milk quality, and estimate their economic benefit. Thus, 33 dairy heifers were enrolled in four groups using a split-splot design. Groups were: (G1) prepartum antimicrobial infusion and vaccination with an E. coli J5 bacterin, (G2) prepartum antimicrobial infusion, (G3) vaccination with an E. coli J5 bacterin, and (G4) control heifers. Composite milk samples for somatic cell count, total bacteria count and milk composition were collected 15 days after calving and every 15 days until the end of the experiment. Bacteriological analysis was carried out at the end of study. The milk production and the incidence of clinical cases of mastitis, as well as the costs associated with them were recorded. The results demonstrate a reduction on clinical mastitis rates by preventive strategies, which implicated in lower volume of discarded milk (0.99, 1.01, 1.04 and 3.98% for G1, G2, G3 and G4, respectively) and higher economic benefit. Thus, in well-managed dairy herds the prevention of heifer mastitis by vaccination or antimicrobial therapy can reduce the amount of antimicrobials needed to treat clinical mastitis cases and the days of discarded milk.

Hydrometallurgical recovery of valuable metals from secondary raw materials

Wastes and side streams in the mining industry and different anthropogenic wastes often contain valuable metals in such concentrations their recovery may be economically viable. These raw materials are collectively called secondary raw materials. The recovery of metals from these materials is also environmentally favorable, since many of the metals, for example heavy metals, are hazardous to the environment. This has been noticed in legislative bodies, and strict regulations for handling both mining and anthropogenic wastes have been developed, mainly in the last decade. In the mining and metallurgy industry, important secondary raw materials include, for example, steelmaking dusts (recoverable metals e.g. Zn and Mo), zinc plant residues (Ag, Au, Ga, Ge, In) and waste slurry from Bayer process alumina production (Ga, REE, Ti, V). From anthropogenic wastes, waste electrical and electronic equipment (WEEE), among them LCD screens and fluorescent lamps, are clearly the most important from a metals recovery point of view. Metals that are commonly recovered from WEEE include, for example, Ag, Au, Cu, Pd and Pt. In LCD screens indium, and in fluorescent lamps, REEs, are possible target metals. Hydrometallurgical processing routes are highly suitable for the treatment of complex and/or low grade raw materials, as secondary raw materials often are. These solid or liquid raw materials often contain large amounts of base metals, for example. Thus, in order to recover valuable metals, with small concentrations, highly selective separation methods, such as hydrometallurgical routes, are needed. In addition, hydrometallurgical processes are also seen as more environmental friendly, and they have lower energy consumption, when compared to pyrometallurgical processes. In this thesis, solvent extraction and ion exchange are the most important hydrometallurgical separation methods studied. Solvent extraction is a mainstream unit operation in the metallurgical industry for all kinds of metals, but for ion exchange, practical applications are not as widespread. However, ion exchange is known to be particularly suitable for dilute feed solutions and complex separation tasks, which makes it a viable option, especially for processing secondary raw materials. Recovering valuable metals was studied with five different raw materials, which included liquid and solid side streams from metallurgical industries and WEEE. Recovery of high purity (99.7%) In, from LCD screens, was achieved by leaching with H2SO4, extracting In and Sn to D2EHPA, and selectively stripping In to HCl. In was also concentrated in the solvent extraction stage from 44 mg/L to 6.5 g/L. Ge was recovered as a side product from two different base metal process liquors with Nmethylglucamine functional chelating ion exchange resin (IRA-743). Based on equilibrium and dynamic modeling, a mechanism for this moderately complex adsorption process was suggested. Eu and Y were leached with high yields (91 and 83%) by 2 M H2SO4 from a fluorescent lamp precipitate of waste treatment plant. The waste also contained significant amounts of other REEs such as Gd and Tb, but these were not leached with common mineral acids in ambient conditions. Zn was selectively leached over Fe from steelmaking dusts with a controlled acidic leaching method, in which the pH did not go below, but was held close as possible to, 3. Mo was also present in the other studied dust, and was leached with pure water more effectively than with the acidic methods. Good yield and selectivity in the solvent extraction of Zn was achieved by D2EHPA. However, Fe needs to be eliminated in advance, either by the controlled leaching method or, for example, by precipitation. 100% Pure Mo/Cr product was achieved with quaternary ammonium salt (Aliquat 336) directly from the water leachate, without pH adjustment (pH 13.7). A Mo/Cr mixture was also obtained from H2SO4 leachates with hydroxyoxime LIX 84-I and trioctylamine (TOA), but the purities were 70% at most. However with Aliquat 336, again an over 99% pure mixture was obtained. High selectivity for Mo over Cr was not achieved with any of the studied reagents. Ag-NaCl solution was purified from divalent impurity metals by aminomethylphosphonium functional Lewatit TP-260 ion exchange resin. A novel preconditioning method, named controlled partial neutralization, with conjugate bases of weak organic acids, was used to control the pH in the column to avoid capacity losses or precipitations. Counter-current SMB was shown to be a better process configuration than either batch column operation or the cross-current operation conventionally used in the metallurgical industry. The raw materials used in this thesis were also evaluated from an economic point of view, and the precipitate from a waste fluorescent lamp treatment process was clearly shown to be the most promising.

Weed Community in a Raw Sugarcane Renovation Area Submitted to Different Soil Managements

The objective of this study was to evaluate the weed community in a raw sugarcane renovation area with three soil managements and peanut sowing in succession. The experiment was conducted during the 2007/08 season on a raw sugarcane area harvested without prior burning in the last five cuts. A randomized block design with treatments arranged in a split plot and arranged in four replications was used. The main treatments consisted of three cropping systems: conventional tillage, minimum tillage and direct planting, and subplots consisted in the absence (resting) or presence of crop rotation with peanuts. After 135 days from planting peanuts and 180 days of sugarcane harvest, the number of weeds m-2 was counted and the shoot dry biomass of the weeds collected was determined. The data were interpreted by analysis of variance and the means were compared by Tukey's test at 5% probability so that phytosociological indices a, b, c e d were calculated. The use of soil conservation tillage and peanut in rotation with sugarcane in the renovation areas is effective in controlling weeds and suppression of weed species difficult to control like Cyperus rotundus, Commelina bengalensis, Urochloa plantaginea, and Digitaria nuda.

Milk protein polymorphisms in Brazilian Zebu cattle

Five bovine milk protein polymorphisms were studied in Zebuine cattle raised in Brazil, through horizontal electrophoresis on starch gel containing urea and 2-mercaptoethanol, using basic and acidic buffer systems. Allelic frequencies for a-La, b-Lg, aS1-Cn, b-Cn and k-Cn loci were estimated in six Gyr herds (N = 283), six Guzerat herds (N = 205), one Nelore herd (N = 17) and one Sindi herd (N = 22), all from São Paulo or Minas Gerais State, Brazil. Genotypic frequencies observed for each locus and breed studied are in accordance with the assumption of genetic equilibrium, demonstrating absence of high inbreeding levels for the breeds tested. The FST value found indicated significant genetic differentiation among breeds; however, the Gyr and Guzerat herds showed significantly different gene frequencies. Genetic distance estimates among zebuine breeds studied and the Holstein breed, taken as a reference for a taurine breed, showed strong differences between these two racial groups

Effects of ethanol intake on retinol concentration in the milk of lactating rats

The effect of the consumption of ethanol (5%) on retinol concentration in milk was studied in the rat on day 12 after delivery, together with the evolution of dam body weight and pup growth rate. Female Wistar rats receiving alcohol (5%) in drinking water during lactation (N = 7) were compared to normal controls fed ad libitum (N = 6). The mean maternal alcohol intake was 3.96 ± 0.23 g/kg body weight per day. To determine retinol levels in milk we used the Bessey and Lowry method, modified by Araújo and Flores ((1978) Clinical Chemistry, 24: 386-392). The pups were separated from dams for a 2-4-h period, after which the dams were injected intraperitoneally with anesthetic and oxytocin. The concentration of retinol in milk was 162.88 ± 10.60 µg/dl in the control group and 60.02 ± 8.22 µg/dl in the ethanol group (P<0.05). The ethanol group consumed less food than the controls and lost a significant amount of weight during lactation. On days 8, 10 and 12, the body weight of the pups from rats given ethanol (13.46 ± 0.43, 16.12 ± 0.48 and 18.60 ± 0.91 g, respectively) were significantly lower (P<0.05) than the weight of pups from controls (15.2 ± 0.44, 18.36 ± 0.54, 20.77 ± 0.81 g). These data show that ethanol intake during the suckling period, even at low concentrations, decreases the amount of retinol in milk and, therefore, the amount available to the pups.

Energy and raw material consumption analysis of powder bed fusion: case study: CNC machining and laser additive manufacturing

Laser additive manufacturing (LAM), known also as 3D printing, is a powder bed fusion (PBF) type of additive manufacturing (AM) technology used to manufacture metal parts layer by layer by assist of laser beam. The development of the technology from building just prototype parts to functional parts is due to design flexibility. And also possibility to manufacture tailored and optimised components in terms of performance and strength to weight ratio of final parts. The study of energy and raw material consumption in LAM is essential as it might facilitate the adoption and usage of the technique in manufacturing industries. The objective this thesis was find the impact of LAM on environmental and economic aspects and to conduct life cycle inventory of CNC machining and LAM in terms of energy and raw material consumption at production phases. Literature overview in this thesis include sustainability issues in manufacturing industries with focus on environmental and economic aspects. Also life cycle assessment and its applicability in manufacturing industry were studied. UPLCI-CO2PE! Initiative was identified as mostly applied exiting methodology to conduct LCI analysis in discrete manufacturing process like LAM. Many of the reviewed literature had focused to PBF of polymeric material and only few had considered metallic materials. The studies that had included metallic materials had only measured input and output energy or materials of the process and compared to different AM systems without comparing to any competitive process. Neither did any include effect of process variation when building metallic parts with LAM. Experimental testing were carried out to make dissimilar samples with CNC machining and LAM in this thesis. Test samples were designed to include part complexity and weight reductions. PUMA 2500Y lathe machine was used in the CNC machining whereas a modified research machine representing EOSINT M-series was used for the LAM. The raw material used for making the test pieces were stainless steel 316L bar (CNC machined parts) and stainless steel 316L powder (LAM built parts). An analysis of power, time, and the energy consumed in each of the manufacturing processes on production phase showed that LAM utilises more energy than CNC machining. The high energy consumption was as result of duration of production. Energy consumption profiles in CNC machining showed fluctuations with high and low power ranges. LAM energy usage within specific mode (standby, heating, process, sawing) remained relatively constant through the production. CNC machining was limited in terms of manufacturing freedom as it was not possible to manufacture all the designed sample by machining. And the one which was possible was aided with large amount of material removed as waste. Planning phase in LAM was shorter than in CNC machining as the latter required many preparation steps. Specific energy consumption (SEC) were estimated in LAM based on the practical results and assumed platform utilisation. The estimated platform utilisation showed SEC could reduce when more parts were placed in one build than it was in with the empirical results in this thesis (six parts).

Provitamin a activity of Brazilian carrots: leaves and roots, raw and cooked and their chemical composition

The purpose of this study was to determine through carotenoid analysis, the provitamin A value of two carrots (Daucus carota L.) cultivars (Brasilia and Beta3), leaves and roots, raw and submitted to two ways of cooking: boiling and microwave. Proximate analysis results are also presented for a better characterization of these vegetables (moisture, ash, lipids, proteins, fiber and total carbohydrates). The main carotenoids sources of provitamin A in this vegetable, both in leaves or roots was β-carotene and α-carotene. α-carotene shows half of the provitamin A value of β-carotene. Samples of the Brasilia cultivar presented the better provitamin A value both for leaves and roots. The results for raw samples of the Brasilia cultivar were 464.48 RE/100g for leaves and 606.42 RE/100g for roots. There were no significant losses of provitamin A with the boiling or microwave cooking methods used.