Prayer and Depression: Women in Rural Pakistan

Background: Mental health, specifically depression, is a burden of disease in Pakistan. Religion and depression have not been studied in Pakistan currently, specially within a subset of a rural population. Methods: A secondary-data analysis was conducted using logistic regression for a non-parametrically distributed data set. The setting was in rural Pakistan, near Rawalpindi, and the sample size data was collected from the SHARE (South Asian Hub for Advocacy, Research, and Education). The measures used were the phq9 scaled for depression, prayer number, mother’s education, mother’s age, and if the mothers work. Results: This study demonstrated that there was no association between prayer and depression in this cohort. The mean prayer number between depressed and non-depressed women was 1.22 and 1.42, respectively, and a Wilcoxan rank sum test indicated that this was not significant. Conclusions: The primary finding indicates that increased frequency of prayer is not associated with a decreased rate of depression. This may be due to prayer number not being a significant enough measure. The implications of these findings stress the need for more depression intervention in rural Pakistan.

Embodied Prayer: the practice of prayer as Christian theology

This dissertation attempts to retrieve the integration of prayer and theology in the life of the church. Prayer is a spiritual and bodily theological activity that forms Christian identity and virtuous character. The bodily dimension of Christian prayer plays an essential role in theological understanding and moral formation. However, the embodiment of prayer has been mostly neglected in modern academic theology. This study highlights the significance of the body at prayer in theological studies and spiritual formation.

Chapter 1 presents Karl Barth’s theology of prayer as a model of the integration of prayer, theology, and Christian life (lex orandi, lex credendi, lex agendi). However, Barth’s attempt to overcome the dichotomy between theory and practice in theology did not pay much attention to embodiment of prayer. Through ritual studies and phenomenology (Marcel Mauss, Maurice Merleau-Ponty, and Pierre Bourdieu), chapter 2 shows why the bodily dimension of the practice of prayer should be recovered in theology and ministry; then it explains how Christians in the early and medieval church actually prayed with the body, how their bodily actions were understood in their theological paradigms, and how their actions contributed to the formation of Christian character. Chapter 3 narrows the focus to the formation of the heart in the making of Christian character. The practice of prayer has been emphasized not only as an expression of the inner heart of pray-ers but also as a channel of grace that shapes their affections as enduring dispositions of the heart. Furthermore, historically the bodily practice of prayer gave theological authority to the devout Christians who were marginalized in academic theology or ecclesiastical hierarchy, and Chapter 4 presents the lex orandi of praying women who gained their theological knowledge, wisdom, and authority through their exemplary practices of prayer (Catherine of Siena, Mechthild of Magdeburg, Julian of Norwich, Margery Kempe, and Teresa of Avila). These historical examples reveal how Christian communities appreciated and celebrated the theological voices from the margins, which developed from theological embodiments in prayer.

This dissertation concludes that academic theology needs to heed these diverse theological voices, which are nurtured through everyday practice, as an integral part of theological studies. Therefore, it calls for a new paradigm for understanding the relationship between theory and practice in theological education. The integration between theory and bodily practice is necessary for both academic theology and spiritual formation. A more holistic understanding of Christian practices will not only enhance the training of scholars and clergy but also give the laity their own theological voices that will enrich academic theology.

Relações entre marcadores digito-palamres e aptidão fisica em atletas de judo de elite

Universidade Estadual de Campinas . Faculdade de Educação Física

Evaluation technique for determining wheel performance in the grinding of aerospace materials

Nickel-based super alloys are used in a variety of applications in which high-temperature strength and resistance to creep, corrosion, and oxidation are required, such as in aircraft gas turbines, combustion chambers, and automotive engine valves. The properties that make these materials suitable for these applications also make them difficult to grind. Grinding systems for such materials are often built around vitrified cBN (cubic boron nitride) wheels to realize maximum productivity and minimum cost per part. Conditions that yield the most economical combination of stock removal rate and wheel wear are key to the successful implementation of the grinding system. Identifying the transition point for excessive wheel wear is important. The aim of this study is to compare the performance of different cBN wheels when grinding difficult-to-grind (DTG) materials by determining the 'wheel wear characteristic curve', which correlates the G-ratio to the calculated tangential force per abrasive grain. With the proposed methodology, a threshold force per grit above which the wheel wear rate increases rapidly can be quickly identified. A comparison of performance for two abrasive product formulations in the grinding of three materials is presented. The obtained results can be applied for the development of grinding applications for DTG materials.

Differential regulation of PGC-1 alpha expression in rat liver and skeletal muscle in response to voluntary running

Background: The beneficial actions of exercise training on lipid, glucose and energy metabolism and insulin sensitivity appear to be in part mediated by PGC-1 alpha. Previous studies have shown that spontaneously exercised rats show at rest enhanced responsiveness to exogenous insulin, lower plasma insulin levels and increased skeletal muscle insulin sensitivity. This study was initiated to examine the functional interaction between exercise-induced modulation of skeletal muscle and liver PGC-1 alpha protein expression, whole body insulin sensitivity, and circulating FFA levels as a measure of whole body fatty acid (lipid) metabolism. Methods: Two groups of male Wistar rats (2 Mo of age, 188.82 +/- 2.77 g BW) were used in this study. One group consisted of control rats placed in standard laboratory cages. Exercising rats were housed individually in cages equipped with running wheels and allowed to run at their own pace for 5 weeks. At the end of exercise training, insulin sensitivity was evaluated by comparing steady-state plasma glucose (SSPG) concentrations at constant plasma insulin levels attained during the continuous infusion of glucose and insulin to each experimental group. Subsequently, soleus and plantaris muscle and liver samples were collected and quantified for PGC-1 alpha protein expression by Western blotting. Collected blood samples were analyzed for glucose, insulin and FFA concentrations. Results: Rats housed in the exercise wheel cages demonstrated almost linear increases in running activity with advancing time reaching to maximum value around 4 weeks. On an average, the rats ran a mean (Mean +/- SE) of 4.102 +/- 0.747 km/day and consumed significantly more food as compared to sedentary controls (P < 0.001) in order to meet their increased caloric requirement. Mean plasma insulin (P < 0.001) and FFA (P < 0.006) concentrations were lower in the exercise-trained rats as compared to sedentary controls. Mean steady state plasma insulin (SSPI) and glucose (SSPG) concentrations were not significantly different in sedentary control rats as compared to exercise-trained animals. Plantaris PGC-1 alpha protein expression increased significantly from a 1.11 +/- 0.12 in the sedentary rats to 1.74 +/- 0.09 in exercising rats (P < 0.001). However, exercise had no effect on PGC-1 alpha protein content in either soleus muscle or liver tissue. These results indicate that exercise training selectively up regulates the PGC-1 alpha protein expression in high-oxidative fast skeletal muscle type such as plantaris muscle. Conclusion: These data suggest that PGC-1 alpha most likely plays a restricted role in exercise-mediated improvements in insulin resistance (sensitivity) and lowering of circulating FFA levels.

Experimental results on the nonlinear H(infinity) control via quasi-LPV representation and game theory for wheeled mobile robots

In this paper, nonlinear dynamic equations of a wheeled mobile robot are described in the state-space form where the parameters are part of the state (angular velocities of the wheels). This representation, known as quasi-linear parameter varying, is useful for control designs based on nonlinear H(infinity) approaches. Two nonlinear H(infinity) controllers that guarantee induced L(2)-norm, between input (disturbances) and output signals, bounded by an attenuation level gamma, are used to control a wheeled mobile robot. These controllers are solved via linear matrix inequalities and algebraic Riccati equation. Experimental results are presented, with a comparative study among these robust control strategies and the standard computed torque, plus proportional-derivative, controller.

Industrial challenges in grinding

This keynote paper aims at analyzing relevant industrial demands for grinding research. The chosen focus is to understand what are the main research challenges in the extensive industrial use of the process. Since the automotive applications are the most important driving forces for grinding development, the paper starts with an analysis on the main trends in more efficient engines and the changes in their components that will affect the grinding performance. A view from 23 machine tool builders is also presented based on a survey made in interviews and during the EMO and IMTS machine tool shows. Case studies received by the STC G members were used to show how research centers and industries are collaborating. A view from the authors and the final conclusions show hot topics for future grinding research. (C) 2009 CIRP.

A novel dressing technique for texturing of ground surfaces

This work presents a novel dressing technique that allows the inscription of pre-configurable patterns, or textures, on the grinding wheel surface. An electro-mechanical exciter connected to the dressing tool receives synchronized signal from a control software engraving patterns on the grinding wheel. The dressing and grinding operations were evaluated using the AE mapping technique. The presented applications show the use of textured grinding wheels for better grinding process performance in conventional applications and also for the production of patterned surfaces in order to change its functional performance. The results and analysis allow a better understanding of the grinding mechanism with patterned wheels. With the application of the proposed method it was possible to inscribe different patterns on workpieces and also to increase the grinding performance in conventional applications. (C) 2010 CIRP.

Surface characterization of 6H-SiC (0001) substrates in indentation and abrasive machining

Surface characterization of 6H-SiC (0001) substrates in indentation and abrasive machining was carried out to investigate microfracture, residual damage, and surface roughness associated with material removal and surface generation. Brittle versus plastic deformation was studied using Vickers indention and nano-indentation. To characterize the abrasive machining response, the 6H-SiC (0001) substrates were ground using diamond wheels with grit sizes of 25, 15 and 7 mum, and then polished with diamond suspensions of 3 and 0.05 mum. It is found that in indentation, there was a scale effect for brittle versus plastic deformation in 6H-SiC substrates. Also, in grinding, the scales of fracture and surface roughness of the substrates decreased with a decrease in diamond grit size. However, in polishing, a reduction in grit size of diamond suspensions gave no significant improvement in surface roughness. Furthermore, the results showed that fracture-free 6H-SiC (0001) surfaces were generated in polishing with the existence of the residual crystal defects, which were associated with the origin of defects in single crystal growth. (C) 2003 Elsevier Ltd. All rights reserved.

High speed versus conventional grinding in high removal rate machining of alumina and alumina-titania

High removal rate (up to 16.6 mm(3)/s per mm) grinding of alumina and alumina-titania was investigated with respect to material removal and basic grinding parameters using a resin-bond 160 mu m grit diamond wheel at the speeds of 40 and 160 m/s, respectively. The results show that the material removal for the single-phase polycrystalline alumina and the two-phase alumina-titania composite revealed identical mechanisms of microfracture and grain dislodgement under the grinding conditioned selected. There were no distinct differences in surface roughness and morphology for both materials ground at either conventional or high speed. An increase in material removal rate did not necessarily worsen the surface toughness for the two materials at both speeds. Also the grinding forces for the two ceramics demonstrated similar characteristics at any grinding speeds and specific removal rates. Both normal and tangential grinding forces and their force ratios at the high speed were lower than those at the conventional speed, regardless of removal rates. An increase in specific removal rate caused more rapid increases in normal and tangential forces obtained at the conventional grinding speed than those at the high speed. Furthermore, it is found that the high speed grinding at all the removal rates exerted a great amount of coolant-induced normal forces in grinding zone, which were 4-6 times higher than the pure normal grinding forces. (c) 2004 Elsevier Ltd. All rights reserved.

Machining of micro aspherical mould inserts

This paper reports a parametric investigation and development of grinding technologies for micro aspherical mould inserts using parallel grinding method. The parametric investigation revealed that at nanometric scale the undeformed chip thickness has little influence on the surface finish of ground inserts. The grinding trace spacing has a slightly larger influence on the surface finish. A new technique was developed to true and dress the resin bonded micro wheels with mesh size of #3000, which produced a satisfactory wheel form accuracy and relatively high grain packing density. A form error compensation technique was also developed, with which mould inserts of submicron form accuracy were consistently produced. Using the developed technologies, micro aspherical inserts of diameters ranging from 200 mu m to 1000 mu m with surface finish of around 10 nm and form error of similar to 0.2-0.4 mu m were successfully fabricated. (c) 2005 Elsevier Inc. All rights reserved.

The metamorphosis of lambda-fold 4-wheel systems into lambda-fold 4-cycle systems

A 4-wheel is a simple graph on 5 vertices with 8 edges, formed by taking a 4-cycle and joining a fifth vertex (the centre of the 4-wheel) to each of the other four vertices. A lambda -fold 4-wheel system of order n is an edge-disjoint decomposition of the complete multigraph lambdaK(n) into 4-wheels. Here, with five isolated possible exceptions when lambda = 2, we give necessary and sufficient conditions for a lambda -fold 4-wheel system of order n to be transformed into a lambda -fold Ccyde system of order n by removing the centre vertex from each 4-wheel, and its four adjacent edges (retaining the 4-cycle wheel rim), and reassembling these edges adjacent to wheel centres into 4-cycles.

Gira Mundos : a Educação Ambiental no mito e o mito na Educação Ambiental

A Educação Ambiental constitui-se na relação entre a natureza e a cultura de modo indissociável das relações de poder e de saber. A pesquisa enreda-se na tendência da Educação Ambiental complexa, analisa os modos de fabricação das subjetividades impostas pelo discurso neocapitalista, investiga a racionalidade herdada da sociedade moderna e explora a lógica dos referenciais afrodescendentes, em específico as lógicas presentes nos Terreiros da Umbanda. Problematiza o mito na Educação Ambiental e a Educação Ambiental no mito a partir das orixalidades umbandistas. Adota a pesquisa narrativa dialogando com Tristão (2012), problematiza os processos de subjetivação a partir de Foucault (1996) e busca capturar os saberes sustentáveis da noosfera umbandista (MORIN, 2005c) influenciada por Deleuze e Guattari (1996-1997). Através das Giras, seu principal ritual, evidencia como essas lógicas são acionadas para a fabricação de novos modos de percepção da relação entre a cultura e a natureza. Contribuem, no processo de investigação para a produção dos dados, a realização de entrevistas abertas e semiestruturadas, o registro em cadernos de bordo, gravações em áudio e vídeo, fotografias e rodas de conversas em encontros com professores e alunos de uma escola pública, próxima aos Terreiros, onde problematiza os processos e mecanismos de exclusão e violência materializados em posturas discriminatórias e de negação da cultura afro-brasileira e o modo como essas experiências são partilhadas pelos professores e alunos no contexto de suas práticas. A aposta metodológica consiste em criar estratégias de narrar experiências da Educação Ambiental em espaços não formais, como os espaços dos Terreiros da Umbanda, e em espaços formais, como a escola, através das orixalidades em narrativas, na busca de zonas de confiança e na invenção de encontros mais solidários, por escutas mais sutis e híbridas, e de novos sentidos de alianças que dissolvam pontos de vistas e desestabilizem discursos do eixo dominante, como forma de exercício do pensamento para abertura de lógicas silenciadas historicamente. Conclui que lógicas complexas incluem as existências infames e obscurecidas pela lógica oficial e que lógicas complexas buscam ver os efeitos dos modos como nós próprios fomos constituídos. A fé-eco-lógica presente nas orixalidades em narrativas potencializa a desconstrução dos regimes de verdade e subverte a monocultura de lógicas.

Os gêneros de discurso, cenografia e ethos em discursos da obra O templo e a forca de Luiz Guilherme Santos Neves

A pesquisa busca mostrar como o discurso religioso do gênero sermão, na voz do enunciador Frei Gregório José Maria de Bene, pode influir na estratégia de adesão e convencimento dos escravos da região de Serra, província do Espírito Santo, para a construção da igreja do Queimado. O sermão citado é o recorte fundamental do discurso literário O Templo e a Forca (1999), recriado por Luiz Guilherme Santos Neves, analisado a partir de cena englobante legitimadora. O trabalho insere-se nos estudos da Analise do Discurso (AD) de linha francesa, pelo referencial teórico de Dominique Maingueneau, que nos orientará quanto às cenografias do padre, sua imagem de enunciador, as condições de produção do sermão, ressaltando elementos que interagem no embate, visando à sociedade da época e às questões culturais dos envolvidos na eclosão da revolta. O principal objetivo é examinar as cenas de enunciação e como se constrói o ethos religioso em cada cena e suas variadas funções. É elementar dizer que o religioso se reconstrói a cada momento a partir do comprometimento com as situações de comunicação. Para maior entendi-mento, dizemos que essas diversas reconstruções apresentam nos discursos diferentes encenações desse tão fomentado religioso com suas estratégias de adesão, apresentando-se ora com a imagem daquele que fala em nome de Deus, preza a docilidade da vida do campo à sombra das andirobeiras gigantes onde se pode sentir o silêncio que convida à contemplação e à prece; ora aquele comprometido com seus propósitos interesseiros e pessoais. Fala para não ser entendido, e o que vale é erguer a casa de São José sem poupar a carne e o sangue das mortes que virão. Importa ressaltar que sempre há possibilidade de olhar ingênuo sobre texto religioso, que, conforme Main-gueneau (2010), só é legível relacionado a vasto intertexto que contribuirá para estruturar o discurso. Para enriquecer ainda mais este estudo, afora o gênero sermão usamos recortes que estruturam o discurso de Neves e sinalizam as variadas cenografias e a forma como se constituem enquanto gêneros: Diálogo interior – momentos solitários do frade – Visão do frade e Monólogo; Diálogo Compartilhado – segmenta diálogos entre o enunciador e seus vários co-enunciadores, que estruturam os acontecimentos do discurso; e o gênero exortação, do padre aos escravos. Os recortes são momentos de grandes embates recriados pelo autor, em discurso leve fazendo seu leitor transitar prazerosamente junto ao frade entre as suas variadas imagens nos discursos. Levando o leitor a acreditar tratar-se de cenas relacionadas ao gênero cômico. E talvez o fosse, se não terminasse em revolta.

Entre rios, praias e planetas : travessias do congo da Barra do Jucu

O Espírito Santo abriga grande diversidade de expressões populares tradicionais que se dividem em grupos, saberes e celebrações. Uma das práticas mais evidentes são as bandas de Congo que abrangem grande parte do Estado e ganham cada vez mais notoriedade. A Barra do Jucu é uma das comunidades mais antigas do Espírito Santo, uma vila de pescadores que séculos atrás compunha parte da grande fazenda Araçatiba fundada pelos Jesuítas e administrada no século XIX pelo coronel Sebastião Vieira Machado. A diversidade cultural dessa região habitada por africanos, indígenas e europeus, propiciou o surgimento de práticas populares como a Marujada, a Folia de Reis e as Bandas de Congo, que persistem até hoje nos municípios de Cariacica, Vila Velha, Guarapari e Viana, no passado, pertencentes à grande fazenda Araçatiba. A formação do Congo na Barra do Jucu é resultado de rodas informais realizadas por conguistas de comunidades ribeirinhas vizinhas, promovidas principalmente pelo senhor Ignácio Vieira Machado, descendente do coronel Sebastião e lideradas por Alcides Gomes da Silva, descendente de negros africanos e açorianos habitantes da fazenda Araçatiba. Durante muito tempo essa prática foi marginalizada, mas atualmente o Congo é considerado um ícone da cultura capixaba. Essa ressignificação está ligada a um processo de valorização e projeção midiática que se iniciou nos anos 1980 e se intensificou nas décadas seguintes. Boa parte dos movimentos e eventos que estimularam esse processo ocorreu na comunidade da Barra do Jucu. Por outro lado, políticos, empresários, indústria do entretenimento e outros setores sociais, aproveitam cada vez mais dessa ascensão do Congo utilizando os grupos tradicionais para fins lucrativos e promocionais. De prática marginal até se tornar ícone cultural, o Congo da Barra do Jucu passou por fazendas, rios, praias e planetas. E sobre essas travessias não só geográficas, mas sociais, culturais e políticas é que este trabalho pretende refletir, além das práticas tradicionais dos grupos e seus usos, buscando trazer à tona as relações entre conguistas, instituições públicas e privadas, mídia e público.