Essays on the general equilibrium effects of barriers to trade on economic growth, foreign trade and the location of economic activity in Brazil

This work presents a fully operational interstate CGE model implemented for the Brazilian economy that tries to quantify both the role of barriers to trade on economic growth and foreign trade performance and how the distribution of the economic activity may change as the country opens up to foreign trade. Among the distinctive features embedded in the model, modeling of external scale economies, port efficiency and land-maritime transport costs provides an innovative way of dealing explicitly with theoretical issues related to integrated regional systems. In order to illustrate the role played by the quality of infrastructure and geography on the country‟s foreign and interregional trade performance, a set of simulations is presented where barriers to trade are significantly reduced. The relative importance of trade policy, port efficiency and land-maritime transport costs for the country trade relations and regional growth is then detailed and quantified, considering both short run as well as long run scenarios. A final set of simulations shed some light on the effects of liberal trade policies on regional inequality, where the manufacturing sector in the state of São Paulo, taken as the core of industrial activity in the country, is subjected to different levels of external economies of scale. Short-run core-periphery effects are then traced out suggesting the prevalence of agglomeration forces over diversion forces could rather exacerbate regional inequality as import barriers are removed up to a certain level. Further removals can reverse this balance in favor of diversion forces, implying de-concentration of economic activity. In the long run, factor mobility allows a better characterization of the balance between agglomeration and diversion forces among regions. Regional dispersion effects are then clearly traced-out, suggesting horizontal liberal trade policies to benefit both the poorest regions in the country as well as the state of São Paulo. This long run dispersion pattern, on one hand seems to unravel the fragility of simple theoretical results from recent New Economic Geography models, once they get confronted with more complex spatially heterogeneous (real) systems. On the other hand, it seems to capture the literature‟s main insight: the possible role of horizontal liberal trade policies as diversion forces leading to a more homogeneous pattern of interregional economic growth.

Barriers to trade: barriers to growth

We study the cxtent to which differences in international trade policies contribute to the significant cross-country disparities in macroeconomic performance. In particular, wc concentrate on the effect of protectionism on generating differences in leveIs (of income and of measured total factor productivity), in growth rates (of output, productivity and inputs), in volatility and in trends (or development traps). We document that these rclationships are strong in cross country data, integrate a Hecksher-Ohlin mode! of international trade into the standard macroeconomic modcl to derive those rclationships analytically, and to quantify them. Our results suggest that a large fraction of the cros::; country variations can be attributed to trade policy.

Barriers to entry and development

This paper analyzes the effect of an accountability system in the Brazilian college market. For each discipline, colleges were assigned a grade that depended on the scores of their students on the ENC, an annual mandatory exam. Those grades were then disclosed to the public, giving applicants information about college quality. The system also established rewards and penalties based on the colleges’ grades. I find that the ENC had a substantial effect on different measures of college quality, such as faculty education and the proportion of full-time faculty. The detailed information from this unique dataset and the fact that the ENC started being required for different disciplines in different years allow me to control for time-specific effects, thus minimizing the bias caused by policy endogeneity. Indeed, I find strong evidence on the importance of controlling for time-specific effects: estimates of the impact of the ENC on college quality more than double when I do not take those effects into account. The ENC also affects positively the ratio between applicants and vacancies, and it decreases the faculty and the entering class sizes. The results suggest that its introduction fostered competition and favored colleges entering the market.

Transport of Pirarucu Arapaima gigas juveniles in plastic bag

Este estudo examinou as respostas de estresse de juvenis de pirarucu transportados em sistema fechado. Pirarucu (Arapaima gigas) é um peixe nativo da bacia Amazônica, da família Osteoglossidae que possui respiração aérea obrigatória. Foi realizado um transporte de curta duração (6 h) em sacos de polietileno inflados com ar atmosférico (grupo ar) ou com oxigênio puro (grupo oxi). O oxigênio dissolvido foi o único parâmetro de qualidade da água que apresentou diferença estatística entre os grupos, e como esperado, o oxigênio estava supersaturado para o grupo oxi. Não houve mortalidade após o transporte em ambos os grupos. Os peixes se alimentaram 36 h após o transporte e apresentaram um consumo de ração habitual após 72 h. As respostas fisiológicas foram semelhantes nos dois grupos. O cortisol não apresentou mudança significativa durante o período de amostragem. Ao contrário da maioria das espécies, os valores de cortisol se apresentaram inalterados nos dois grupos durante a amostragem, enquanto a glicose teve um aumento significativo até 12 h após o transporte. Os resultados mostram que o transporte de pirarucu em sacos de polietileno pode ser realizado com ar atmosférico ou oxigênio puro, uma vez que as respostas de estresse, a qualidade da água e o comportamento alimentar após 36 h foram similar entre os grupos.

MIGRATION MEASUREMENTS FROM PLASTIC PACKAGING: A SIMULATION STUDY ON INFLUENCE OF INITIAL CONCENTRATION PROFILE

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Energy education: breaking up the rational energy use barriers

Human development is associated directly or indirectly with the energy use, and because of this the energetic sources were dealt with in the recent past, as fully available to human necessities. The reality shows that the energy availability, considering the nonrenewable sources, is limited, and beyond that, the exploration, the processing and the use of energy impose considerable impacts on the environment. There is not a system which operates with no losses and without imposing changes to the environment. Therefore, the energy conservation incorporates the concepts and the actions applied to the research of sustainable balance between nature and the energy availability and use. Such actions can be presented both in the short term, in which the energy system is close to a collapse, or in the medium/long term, in which those responsible for the energy policies are concerned with the structure of the socioeconomic development. Such a situation requires more responsibility in the treatment of energy questions, mainly through education, which represents long-term investments. This paper discusses barriers that are present in the projects applied to energy conservation, by making clear that education is one of the best ways to transform the human behavior in for the rational use of energy. (C) 2003 Elsevier B.V. Ltd. All rights reserved.

Fractal behavior throughout stretch zone of 15-5PH steel under elastic-plastic loading conditions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Experimental Investigation into the Characteristics of In-Pipe Leak Noise in Plastic Water Filled Pipes

This paper presents an experimental investigation of the characteristics of leak noise in plastic water-filled pipes. An experimental set-up was designed to identify the physical mechanisms of leak noise generation. Possible mechanisms include cavitation and turbulence. The experiments show that cavitation is not responsible for leak noise generation and clearly indicate that turbulence is the main mechanism, at least in the experiments conducted. An alternative experimental set-up was also designed to identify the characteristics of leak noise spectra and to investigate how the spectra are affected by the leak size and the leak flow velocity. A number of different hole sizes (leaks) starting from 1 mm diameter, increasing progressively every 0.5 mm until a size of 4 mm diameter were tested for different jet velocities and an empirical model that describes this behaviour is proposed.

Microstructural Characterization of Ti-6Al-7Nb Alloy After Severe Plastic Deformation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Evolution of representation of the hands in plastic arts

A interação entre arte e ciência foi intensa durante o Renascimento, sofrendo declínio nos anos posteriores com retomada significativa no século XX, principalmente com o uso de técnicas de identificação, datação de obras de arte e o desenvolvimento de novos materiais. O relacionamento entre artes plásticas e Cirurgia da Mão mantêm-se intenso , sendo freqüente o uso de reproduções artísticas da mão nas ilustrações de textos científicos. Objetivando compreender o papel da mão nas artes plásticas, reproduções de obras de artes (esculturas e pinturas) representativas de vários estilos ou períodos da história da arte foram analisadas com enfoque no estudo das mãos. Detalhes anatômicos, relacionamento com outras estruturas do corpo humano, papel na composição e aspectos simbólicos das mãos foram estudados no contexto histórico e artístico de obras de arte do período paleolítico (pré-história) até o século XX. A representação da mão nas artes plásticas está diretamente relacionada ao estilo ou período da obra e à capacidade individual de interpretação e execução do artista.

Injectable gels of anionic collagen : rhamsan composites for plastic correction: Preparation, characterization, and rheological properties

The present article describes the preparation and characterization A anionic Collagen gels obtained from porcine intestinal submucosa after 72 h of alkaline treatment and in the form of rhamsan composites to develop injectable biomaterials for plastic for construction. All materials were characterized by SDS/polyacrylamide gel electrophoresis, infrared spectroscopy, thermal stability, potentiometric titration, rheological properties, and fluidity tests. Biocompatibility was appraised after the injection of anionic collagen:rhamsan composites at 2.5% in 60 North Folk rabbits. Independently of processing, the Collagen's secondary structure was preserved in all cases, and after 72 h of hydrolysis the Collagen was characterized by a carboxyl group content of 346 :L 9, which, at physiological pH, corresponds to an increase of 106 17 negative charges, in comparison to native Collagen, due to the selective hydrolysis of asparagine and glutamine carboxyamide side chain. Rheological studies of composites at pH 7.4 in concentrations of 2, 4, and 6% (in proportions of 75:1 and 50:1) showed a viscoelastic behavior dependent on the frequency, which is independent of concentration and proportion. In both, the concentration of the storage modulus always predominated over the loss modulus (G' > G and delta < 45 degrees). The results from creep experiments confirmed this behavior and showed that anionic collagen:rhamsan composites at pH 7.4 in the proportion of 50:1 are less elastic and more susceptible to deformation in comparison to gels in the proportion of 75:1, independent of concentration. This was further confirmed by flow experiments, indicating that the necessary force for the extrusion of anionic collagen:rhamsan composites, in comparison to anionic Collagen, was significantly smaller and with a smooth flow. Biocompatibility studies showed that the tissue reaction of anionic collagen:rhamsan composites at 2.5% in the proportion of 75:1 was compatible with the application of these gels in plastic reconstruction. These results suggest that the association of Collagen with rhamsan may be a good alternative in the replacement of glutaraidehyde to stabilize the microfibril assembly of commercial Collagen gel preparations. (c) 2005 Wiley Periodicals, Inc.

Comparison of the Accuracy of Plastic and Metal Stock Trays for Implant Impressions

Purpose: This in vitro study evaluated the dimensional accuracy of two impression techniques (tapered and splinted) with two stock trays (plastic and metal) for implant-supported prostheses. Materials and Methods: A master cast with four parallel abutment analogs and a passive framework were fabricated. Polyvinyl siloxane impression material was used for all impressions with two metal stock trays and two plastic stock trays (closed and open trays). Four groups (tapered plastic, splinted plastic, tapered metal, and splinted metal) and a control group (master cast) were tested (n = 5 for each group). After the framework was seated on each of the casts, one abutment screw was tightened, and the marginal gap between the abutment and framework on the other side was measured with a stereomicroscope. The measurements were analyzed with the Kruskal-Wallis one-way analysis of variance on ranks test followed by the Dunn method. Results: The mean values (+/- standard deviations) for the abutment/framework interface gaps were: master cast, 32 +/- 2 mu m; tapered metal, 44 +/- 10 mu m; splinted metal, 69 +/- 28 mu m; tapered plastic, 164 +/- 58 mu m; splinted plastic, 128 +/- 47 mu m. No significant difference was detected between the master cast, tapered metal, and splinted metal groups or between the tapered and splinted plastic groups. Conclusions: In this study, the rigidity of the metal stock tray ensured better results than the plastic stock tray for implant impressions with a high-viscosity impression material (putty). Statistically similar results were obtained using tapered impression copings and splinted squared impression copings. The tapered impression copings technique and splinted squared impression copings technique with a metal stock tray produced precise casts with no statistically significant difference in interface gaps compared to the master cast. INT J ORAL MAXILLOFAC IMPLANTS 2012;27:544-550.

Stages of behavior change and perceived barriers to physical activity in the elderly living in a medium size city in Brazil

The aim was to analyze the prevalence of the stages of behavior change (BCS) and the perceived barriers to physical activity in older people residents in a medium size city of São Paulo state, Brazil. Seventy-nine older people participated of the study. The BCS was assessed by the Questionnaire of Behavior Chance Stages and those on perception of barriers by the Questionnaire on Barriers to the Practice of Physical Activity in Older People (QBPPAE). Statistical analyses was comprised by the Chi-square test (p<0.05). Data showed that: a) 64,6% of the older people do not practice physical activity and only 22,8% of them have been practicing it on a regular basis for more than 6 months; b) The most perceived barriers were: "Active enough", "Too old"; "Need to rest" and; "Disease or injury"; c) The BCS seems modulate significantly the perception of barriers (p<0.05). We can conclude that: a) most of the older people are in the pre-contemplation, contemplation and preparation stages of the BCS, yet; b) gender influences almost nothing with perception of barriers and; c) the BCS interferes with the type of perceived barriers. Such conclusions support the suggestions that it is necessary to develop specific strategies for different stages of behavior change if it is to minimize the barriers. This may help to find the most effective way to change to more active lifestyle in the elderly.