Curva de lactação de cabras da raça Alpina e de seus mestiços boer, em sistema de produção em pasto, com e sem suplementação concentrada

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Recria de Rã touro (Rana catesbeiana) em tanques-rede alojados em viveiros de tilápia

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Organic coffee under perspective of energy efficiency

The energy analysis development in this study contributes to the understanding of the dynamics of the organic coffee productive system, in particular to assess the independence of this system with respect to the use of industrialized input products. Thus, it provides information about the sustainability of that production system. Technical itineraries used in this study consist of energy expenditure made with coffee cultivation, according to the type, source and form of energy inputs, agricultural machines, equipment and labor force used in that production system. The energy expenditure, converted into energy units, quantified the input energy. And the organic coffee production, measured in kilograms of processed coffee beans, was the output energy. Primary data used in this study were obtained from organic coffee producers in the Southern region of Minas Gerais State, Brazil, in 2011. Energy balance identified was positive, since the estimated output energy was 626.465 MJ/ha and the energy expenditure was 112.998 MJ/ha, during the useful life of the crop.

Desempenho de variedades de mamoeiro em clima subtropical do Estado de São Paulo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Gestão energética nos setores transversais para redução do consumo de energia em uma empresa automobilística

Pós-graduação em Engenharia de Produção - FEG

Redução de tempos de setup: aplicação de troca rápida de ferramentas em indústria de bebidas

The current competitive market requires companies to adapt so that they can meet the needs of customers in an agile manner and aimed at the lowest possible cost in their manufacture, be it a product or service. The Toyota Production System is aimed at higher profits through lean manufacturing practices with reduced spending, smaller lots and inventories, generated by market demand. The variety of products makes the setup of the equipment a critical point and it should be reduced as much as possible so it does not affect productivity. The rapid exchange of tools allows with few actions and a modification that time does not exceed one digit on your total time. In this study, a case study showed that only with standardization and use of cheap improvements made it possible to reduce setup time in bottle labeling machine by 98 minutes for a final time of approximately 10 minutes with little investment, demonstrating the feasibility the displayed and a monthly gain tool in bottles at approximately 120,000, generating a performance gain and budget of approximately R$ 94,000.00 per month

Redução de tempos de setup: aplicação de troca rápida de ferramentas em indústria de bebidas

The current competitive market requires companies to adapt so that they can meet the needs of customers in an agile manner and aimed at the lowest possible cost in their manufacture, be it a product or service. The Toyota Production System is aimed at higher profits through lean manufacturing practices with reduced spending, smaller lots and inventories, generated by market demand. The variety of products makes the setup of the equipment a critical point and it should be reduced as much as possible so it does not affect productivity. The rapid exchange of tools allows with few actions and a modification that time does not exceed one digit on your total time. In this study, a case study showed that only with standardization and use of cheap improvements made it possible to reduce setup time in bottle labeling machine by 98 minutes for a final time of approximately 10 minutes with little investment, demonstrating the feasibility the displayed and a monthly gain tool in bottles at approximately 120,000, generating a performance gain and budget of approximately R$ 94,000.00 per month

Exergy efficiency analysis of chemical and biochemical stages involved in liquid biofuels production processes

Liquid biofuels can be produced from a variety of feedstocks and processes. Ethanol and biodiesel production processes based on conventional raw materials are already commercial, but subject to further improvement and optimization. Biofuels production processes using lignocellulosic feedstocks are still in the demonstration phase and require further R&D to increase efficiency. A primary tool to analyze the efficiency of biofuels production processes from an integrated point of view is offered by exergy analysis. To gain further insight into the performance of biofuels production processes, a simulation tool, which allows analyzing the effect of process variables on the exergy efficiency of stages in which chemical or biochemical reactions take place, were implemented. Feedstocks selected for analysis were parts or products of tropical plants such as the fruit and flower stalk of banana tree, palm oil, and glucose syrups. Results of process simulation, taking into account actual process conditions, showed that the exergy efficiencies of the acid hydrolysis of banana fruit and banana pulp were in the same order (between 50% and 60%), lower than the figure for palm oil transesterification (90%), and higher that the exergy efficiency of the enzymatic hydrolysis of flower stalk (20.3%). (C) 2011 Elsevier Ltd. All rights reserved.

Exercise Performance and Dynamic Hyperinflation in Lymphangioleiomyomatosis

Rationale: Lymphangioleiomyomatosis (LAM) is characterized by exercise performance impairment. Although airflow limitation is common, no previous studies have evaluated the prevalence and impact of dynamic hyperinflation (DH) in LAM. Objectives: To investigate the dynamic responses during maximal exercise and the prevalence, predictors, and repercussions of DH in LAM. Methods: Forty-two patients with LAM performed symptom-limited incremental cycle exercise and pulmonary functions tests (PFTs) and were compared with 10 age-matched healthy women. Dyspnea intensity, inspiratory capacity, oxygen saturation, and cardiac, metabolic, and respiratory variables were assessed during exercise. Patients with LAM also performed a 6-minute walk test (6MWT). Measurements and Main Results: Patients with LAM had higher baseline dyspnea, poorer quality of life, obstructive pattern, air trapping, and reduced diffusing capacity of carbon monoxide in PFTs. Although they had the same level of regular physical activity, their maximal exercise performance was reduced and was associated with ventilatory limitation, greater desaturation, and dyspnea. The prevalence of DH was high in LAM (55%), even in patients with mild spirometric abnormalities, and was correlated with airflow obstruction, air trapping, and diffusing capacity of carbon monoxide. Compared with the non-DH subgroup, the patients who developed DH had a ventilatory limitation contributing to exercise cessation on cycling and higher desaturation and dyspnea intensity during the 6MWT. Conclusions: Ventilatory limitation and gas exchange impairment are important causes of exercise limitation in LAM. DH is frequent in LAM, even in patients with mild spirometric abnormalities. DH was associated with the severity of disease, higher dyspnea, and lower oxygen saturation. In the 6MWT, desaturation and dyspnea were greater in patients with DH.

Three time-based scale formulations for the two-stage lot sizing and scheduling in process industries

In this paper, we propose three novel mathematical models for the two-stage lot-sizing and scheduling problems present in many process industries. The problem shares a continuous or quasi-continuous production feature upstream and a discrete manufacturing feature downstream, which must be synchronized. Different time-based scale representations are discussed. The first formulation encompasses a discrete-time representation. The second one is a hybrid continuous-discrete model. The last formulation is based on a continuous-time model representation. Computational tests with state-of-the-art MIP solver show that the discrete-time representation provides better feasible solutions in short running time. On the other hand, the hybrid model achieves better solutions for longer computational times and was able to prove optimality more often. The continuous-type model is the most flexible of the three for incorporating additional operational requirements, at a cost of having the worst computational performance. Journal of the Operational Research Society (2012) 63, 1613-1630. doi:10.1057/jors.2011.159 published online 7 March 2012

Life cycle assessment of sugarcane ethanol and palm oil biodiesel joint production

Sugarcane (Saccharum spp.) and palm tree (Elaeis guianeensis) are crops with high biofuel yields, 7.6 m(3) ha (1) y(-)1 of ethanol and 4 Mg ha(-1) y(-1) of oil, respectively. The joint production of these crops enhances the sustainability of ethanol. The objective of this work was comparing a traditional sugarcane ethanol production system (TSES) with a joint production system (JSEB), in which ethanol and biodiesel are produced at the same biorefinery but only ethanol is traded. The comparison is based on ISO 14.040:2006 and ISO 14044:2006, and appropriate indicators. Production systems in Cerrado (typical savannah), Cerradao (woody savannah) and pastureland ecosystems were considered. Energy and carbon balances, and land use change impacts were evaluated. The joint system includes 100% substitution of biodiesel for diesel, which is all consumed in different cropping stages. Data were collected by direct field observation methods, and questionnaires applied to Brazilian facilities. Three sugarcane mills situated in Sao Paulo State and one palm oil refinery located in Para State were surveyed. The information was supplemented by secondary sources. Results demonstrated that fossil fuel use and greenhouse gas emissions decreased, whereas energy efficiency increased when JSEB was compared to TSES. In comparison with TSES, the energy balance of JSEB was 1.7 greater. In addition, JSEB released 23% fewer GHG emissions than TSES. The ecosystem carbon payback time for Cerrado, Cerradao, and Degraded Grassland of JSEB was respectively 4, 7.7 and -7.6 years. These are typical land use types of the Brazilian Cerrado region for which JSEB was conceived. (C) 2012 Elsevier Ltd. All rights reserved.

NUTRITIONAL BALANCE, ESSENTIAL OIL AND WOOD PRODUCTION FROM Corymbia citriodora Hill & Johnson WITH SEWAGE SLUDGE AND MINERAL FERTILIZER APPLICATIONS

The Corymbia citriodora is one of the most important forest species in Brazil and the reason is the diversity of its use, because it produces good quality wood and the leaves may be used for essential oil production. Although, there are not many studies about species and the handling effect in the nutritional balance. This study aimed to evaluate the biomass production and nutrient balance in the conventional production of essential oil and wood of Corymbia citriodora with sewage sludge application. The experiment design established was the randomized blocks, with four replicates and two treatments: 1 - fertilization with 10 tons ha(-1) (dry mass) of sewage sludge, supplemented with K and B, and 2 - mineral fertilization. It was evaluated the aerial biomass production, the nutrient export of the leaves, the essential oil and wood production at four years old. The trees that received application of sewage sludge produced 20 % more leaves biomass than the trees with mineral fertilization, resulting in larger oil production. Besides, the trees with sewage sludge application produced 14.2 tons ha(-1) yr(-1) of woody biomass that was 27 % higher than the treatment with mineral fertilization. For both treatments the N balance was negative, but treatment with sewage sludge application (-45 kg ha(-1)) was four times lower than the observed on mineral fertilization treatment (-185 kg ha(-1)). It may be concluded in this paper that the application of sewage sludge benefits the production of leaves biomass, essential oil and wood, besides result better nutritional balance of the Corymbia citriodora production system.

Qualifying instrument for evaluation of food and nutritional care in hospital

Establishing criteria for hospital nutrition care ensures that quality care is delivered to patients. The responsibility of the Hospital Food and Nutrition Service (HFNS) is not always well defined, despite efforts to establish guidelines for patient clinical nutrition practice. This study describes the elaboration of an Instrument for Evaluation of Food and Nutritional Care (IEFNC) aimed at directing the actions of the Hospital Food and Nutrition Service. This instrument was qualified by means of a comparative analysis of the categories related to hospital food and nutritional care, published in the literature. Elaboration of the IEFNC comprised the following stages: (a) a survey of databases and documents for selection of the categories to be used in nutrition care evaluation, (b) a study of the institutional procedures for nutrition practice at two Brazilian hospitals, in order to provide a description of the sequence of actions that should be taken by the HFNS as well as other services participating in nutrition care, (c) design of the IEFNC based on the categories published in the literature, adapted to the sequence of actions observed in the routines of the hospitals under study, (d) application of the questionnaire at two different hospitals that was mentioned in the item (b), in order to assess the time spent on its application, the difficulties in phrasing the questions, and the coverage of the instrument, and (e) finalization of the instrument. The IEFNC consists of 50 open and closed questions on two areas of food and nutritional care in hospital: inpatient nutritional care and food service quality. It deals with the characterization and structure of hospitals and their HFNS, the actions concerning the patients' nutritional evaluation and monitoring, the meal production system, and the hospital diets. "This questionnaire is a tool that can be seen as a portrait of the structure and characteristics of the HFNS and its performance in clinical and meal management dietitian activities." (Nutr Hosp. 2012;27:1170-1177) DOI:10.3305/nh.2012.27.4.5868

Performance and radial distribution profiles of a variable flow rate sprinkler developed for precision irrigation

Variable rate sprinklers (VRS) have been developed to promote localized water application of irrigated areas. In Precision Irrigation, VRS permits better control of flow adjustment and, at the same time, provides satisfactory radial distribution profiles for various pressures and flow rates are really necessary. The objective of this work was to evaluate the performance and radial distribution profiles of a developed VRS which varies the nozzle cross sectional area by moving a pin in or out using a stepper motor. Field tests were performed under different conditions of service pressure, rotation angles imposed on the pin and flow rate which resulted in maximal water throw radiuses ranging from 7.30 to 10.38 m. In the experiments in which the service pressure remained constant, the maximal throw radius varied from 7.96 to 8.91 m. Averages were used of repetitions performed under conditions without wind or with winds less than 1.3 m s-1. The VRS with the four stream deflector resulted in greater water application throw radius compared to the six stream deflector. However, the six stream deflector had greater precipitation intensities, as well as better distribution. Thus, selection of the deflector to be utilized should be based on project requirements, respecting the difference in the obtained results. With a small opening of the nozzle, the VRS produced small water droplets that visually presented applicability for foliar chemigation. Regarding the comparison between the estimated and observed flow rates, the stepper motor produced excellent results.

Per un'archeologia del lavoro in eta' protobizantina. Organizzazione e committenza del cantiere edilizio attraverso i marchi dei marmorari

La ricerca riguarda lo studio del cantiere edilizio protobizantino, con particolare riferimento al ciclo della lavorazione del marmo. Quest’ultimo viene analizzato sotto il profilo amministrativo, tecnico, sociale ed artigianale. L’elemento guida della ricerca sono i marchi dei marmorari, sigle apposte da funzionari e maestranze durante il processo produttivo. Dapprima, fonti letterarie ed epigrafiche, tra cui le sigle di cava e officina su marmo, vengono esaminate per ricostruire il sistema alto-imperiale di amministrazione delle cave e di gestione dei flussi marmorei, nonché l’iter tecnico-artigianale adottato per la produzione dei manufatti. Il confronto con i dati disponibili per la tarda antichità, con particolare riferimento alle cave di Proconneso, evidenzia una sostanziale continuità della prassi burocratico-amministrativa, mentre alcuni cambiamenti si riscontrano nell’ambito produttivo-artigianale. Il funzionamento degli atelier marmorari viene approfondito attraverso lo studio dei marchi dei marmorari. Si tratta di caratteri greci singoli, multipli o monogrammi. Una ricognizione sistematica delle sigle dalla pars Orientalis dell’impero, reperite in bibliografia o da ricognizioni autoptiche, ha portato alla raccolta di circa 2360 attestazioni. Per esse si propone una classificazione tipologica tra sigle di cava, stoccaggio, officina. Tra le sigle di cava si annoverano sigle di controllo, destinazione/committenza, assemblaggio/posizionamento. Una particolare attenzione è riservata alle sigle di officina, riferibili ad un nome proprio di persona, ovvero al πρωτομαΐστωρ, il capo-bottega che supervisionava il lavoro dei propri artigiani e fungeva da garante del prodotto consegnato alla committenza. Attraverso lo studio comparato delle sigle reperite a Costantinopoli e in altri contesti si mette in luce la prassi operativa adottata dagli atelier nei processi di manifattura, affrontando anche il problema delle maestranze itineranti. Infine, sono analizzate fonti scritte di varia natura per poter collocare il fenomeno del marmo in un contesto socio-economico più ampio, con particolare riferimento alle figure professionali ed artigianali coinvolte nei cantieri e al problema della committenza.